Database Users

Newbish Questions

Please forgive these basic questions. I myself am a wing owner, but a coworker is in constant awe of the power of xda and has enlisted my help in maximizing his Hermes. Just a couple of questions:
Meaning to come off as a complete newb or a jacka** is not what I desire, but at the same time I haven't hours to invest towards knowing every detail about a phone I myself do not own. I'm fully well aware of how to search and obviously if I can type I can read, so informing to do either of these tasks will be meaningless to me.
My questions:
1) With the wing, if you "brick" your phone during a ROM flash, you can re-flash an RUU and you'll be just fine. Does this work the same way with the Hermes?
2) How difficult is the HardSPL process with the Hermes and is there anything to watch out for?
3) Are there special steps needed to take in order to upgrade him from wm5 to wm6/6.1 or a ROM based upon either version?
4) Is there a way to overclock the phone, and does it make a noticable difference? I already put batterystatus on it and it isn't giving me the overclocking options it does with my wing. I'm guessing it's because it's a different type of processor or because it's reading the base speed of the CPU @ 400mhz, which is higher than any of the overclocked speeds it offers me on my wing.
5) Is there anything else important to know about his phone? The last thing I want for the guy is to take his phone with promises if grandeur, and hand him back a paperweight without answers.

1) Depends on what brick
if you have hardspl'd and it just failed flashing the OS then you should be able to recover.. providing that you can get into bootloader mode.
if you are flashing the radio and it fails then you own a paperweight..
2) Hardspl on the hermes is simple - just read the thread and its easy

So for the Hermes, you flash the OS seperate from the Radio? Or are you talking about if you're reflashing only the radio?
And if you're not HardSPL and you brick during the OS flash you can't just go into bootloader and flash the RUU to recover the phone?

Well, as an 8525 owner, I'd have to say that flashing ROMs to a Hermes is rather painless and straight forward. I started with the official ROM for WM6 since it covered so many bases. However, I eventually used HardSPL(quite a painless experience) and loaded a ROM to it that didn't take up that much storage.
One word of warning. Make sure that the data connector's in good condition before attempting to flash. If it's not, use the microSD method. This procaution will save you many headaches.
I don't recommend overclocking. 1, it's dangerous. 2, there's few methods out there and many of them are said not to work. 3, by using a ROM with a large page pool you can increase the phone's speed.
Special? Well, that depends on the model.

I'm familiar with the pros and cons of overclocking as I myself have my wing overclocked from 201mhz to 273 and run it that way 24/7/365. Just curious as to how one does it on the hermes since BatteryStatus was a no-go.
Is there a particular wm6.1 rom that anyone would like to recommend? I know itje and ttran do exceptional work for the wings/heralds, but who're the cooks to look out for in the Hermes world?
And what exactly is the SD flash method for Hermes? On mine now that I'm hardspl'ed I can put any .nbh on my sd, rename it to HERAIMG.nbh, put it into bootloader and it'll flash for me.

I've not really delved into 6.1 due to early compatibility issues. I did try one, but I liked Schap's ROM better.
http://forum.xda-developers.com/showthread.php?t=392777
Basicly the same, but you have to name it HERMIMG.nbh. If you don't know how to get to bootloader mode, just push the side OK button, the power button, and the reset all at once. I used SSPL to put HardSPL onto my phone using the microSD method, so even if the data port's busted, all should be fine.

Basically any cooked rom doesn't have a radio rom cooked in. This allows YOU to decide what radio is best for you. My advice is if it works fine, leave it alone... When kingsizeriz says its a total brick he means that it won't work as a phone ever again... However, as a PDA, no worries, just flash a cooked rom with no radio...
Hard SPL is a MUST.... Also see if you can find out if you friends phone is "locked" to a network, you'll have to unlock first using this : http://forum.xda-developers.com/showthread.php?t=293665
Then Hard SPL, Here : http://forum.xda-developers.com/showthread.php?t=296722
To use the sd card method for Hard SPL, check out page 116.
Then flash with rom of choice... WM 6.1 is MUCH more stable now, & REALLY quick... Would suggest the PDAViet roms as I seem to find them pretty stable though the later versions of other roms seem ok too (19202 & up).
To flash with sd card - MAKE SURE YOU HAVE HARD SPL INSTALLED....
copy .nbh file to root directory of card and rename to "hermimg.nbh". Put in hermes and go into bootloader. Follow the prompts...
Hope this helps...Cheers....

Can you tell me either how many posts per page you use or what post number to start looking for? I use the max number of posts per page so the number might be different.
And I know he bought the phone from and uses it on AT&T, so I'd imagine it's locked to that.
Also, nobody's mentioned if there's any special steps needed to take to upgrade his phone from wm5 to 6(.1). Are there any?

Post #1160, Has all links for apps needed too...
If you want to sim/cid unlock you can run the unlocker v3to use Any sim card .
If you want to do this then do it 1st. It will upgrade your SPL to 1.10.
THEN Hard SPL... THIS IS A MUST. It wont stop you from bricking your device BUT it will improve your chances of recovering from most accidents....
Get you friend to find any HERMES rom they like (I like PDAViet 19588 at the moment as is VERY speedy) & download. I would recommend using the sd card method as it is safer from silly buggers "accidently" resetting pc or pulling out usb cable and power brown/black outs. All you need is for them to leave the hermes alone for 10 minutes or so while it flashes. Make sure you have better than 50% battery power though as flashing is battery draining... Even via usb it stops charging to flash...
Previous post as links for programs needed. Cheers....

[TUT] Flashing your First GSM 512LEO Rom - With HSPL4 (For Noobs)

PLEASE READ THE *FAQ* BEFORE ASKING QUESTIONS OR LOOK AT *THIS* THREAD THANKS TO RZASHARP
ALSO DEFINITELY CHECK OUT THE COMPLETE VIDEO GUIDE TO EVERYTHING *HERE* THANKS TO [★]
This Guide is designed ONLY for HD2 with 512 Mbytes ROM. If you are unsure then goto Settings, System, Device Information, Hardware Information and look at the Flash Size.
If you have a LEO with 1024MB ROM then please use *THIS* guide.
Before starting, backup anything you might want to keep after the new Rom has been flashed as all contacts, emails, texts, notes, Internet BookMarks WILL be lost!!
PimBackup is good and free (copy any mms attachments to your storage card or computer seperately)
*ONCE YOU HAVE FLASHED A HARDSPL ITS PERMANENT. YOU DONT NEED TO DO IT AGAIN WHEN FLASHING NEW ROMS OR RADIOS*
*DO NOT start another process while the flashing process is taking place*
*DO NOT click off of the status bar... Let it stay in the foreground*
*DO NOT let the Screensaver (on your pc) activate*
Any of these can lead to a bad flash and possibly brick your phone
*FLASH HARDSPL BEFORE FLASHING ANY CUSTOM ROMS OR RADIOS*
1. YOUR DEVICE MUST HAVE AT LEAST 50% BATTERY POWER FIRST BEFORE ATTEMPTING EACH STAGE
--------------------------------------------------------------
--------------------------------------------------------------
2. FLASH HARDSPL (REQUIRED!! DO THIS BEFORE ANYTHING ELSE)
The Original HardSPL Thread is *HERE*
NOTE: If you have Vista or Windows 7, update WMDC to v6.1 *HERE* first
NOTE: Turn OFF any AntiVirus Program first as it WILL interefere with the flash (there is NO harmful code in the program)
Installing HardSPL4 via ActiveSync with USB Lead (thanks to Bepe)
Note: HardSPL CANNOT be installed via microSD Card.
IMPORTANT: To install/uninstall this HSPL3 there must be any SPL version from this list on your device:
SPL 1.42.0000, SPL 1.62.0000, SPL 1.66.0000, SPL 2.07.0000, SPL 2.08.0000, SPL 2.10.0000, SPL 3.03.000
To Uninstall you can flash a Stock ROM via SD card or use HSPL3 application (You need select 2.08.0000 or 3.03.0000 in the choose screen)
1. Download HardSPL4 package from *HERE* and extract to an empty folder
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
3. Run HSPL4.exe from your pc and read all the text carefully
4. When finished reading click next in the HardSPL program
5. The program will now check the usb connection and enter bootloader screen (tri colour)
*You can select between 2.08.HSPL 2.08.0000 HSPL3.03.0000 or 3.03.HSPL. This is to avoid people with 1024LEO's installing an incompatable version and bricking their device*
Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03.
You need HSPL2.08 to run Android / WP7 / MAGLDR
6. Select 2.08.HSPL OR 3.03HSPL for HardSPL and click NEXT.
7. Your choice will be flashed to your phone.
8. When its finished the phone will reboot.
9. Click ok to terminate program.
10. Congrats, you just flashed HardSPL.
NOTE: You can also install HARDSPL by entering Bootloader mode manually, then running the HSPL4.exe program once you see 'USB' at the bottom of the tri-colour screen.
*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear). Verify the screen shows the SPL or HardSPL you installed*
--------------------------------------------------------------
--------------------------------------------------------------
To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes
You can remove the HSPL by flashing an original SPL from microSD card OR by running the HSPL4 application (You need select 2.08.0000 or 3.03.0000 in the choose screen).
* You can also use the microSD Card method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
--------------------------------------------------------------
--------------------------------------------------------------
3. DOWNLOAD AND FLASH YOUR PREFERED ROM
NOTE: Check the Roms Thread for any specific Flashing instructions. If there arent any then you can use the following guide.
Flashing Via ActiveSync
1. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your computer
2. REMOVE SIM and microSD CARDS!! (this is a precautionary measure and is not compulsory)
3. Turn phone back on and wait until it syncs with your PC
4a. If your Rom is a .exe (customRUU.exe is already included in the Rom file) then run the file
4b. If your Rom is a .nbh file then run the CustomRUU.exe from the Roms Folder (if one isnt included then download it *HERE*)
5. Follow onscreen instructions to set up your New Rom
6. Once phone has gone through the customisation procedure then replace Sim and microSD Cards
7. Perform a Hard Reset to clear any leftover data from your previous Rom (see intructions at bottom).
8. Set up phone as required and job done.
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
--------------------------------------------------------------
--------------------------------------------------------------
4. FLASH PREFERED RADIO (OPTIONAL)
For more information about compatible Radios go *HERE*
Flashing Via ActiveSync
1. Download your required Radio and rename the extracted file to RUU_Signed.nbh
2. Sync your phone with the PC
3. Run CustomRUU.exe from the Radio's Folder and follow the instructions (if one isnt included then download it *HERE*)
Flashing via MicroSD Card
Use same method as Flashing a Rom via MicroSD Card
--------------------------------------------------------------
--------------------------------------------------------------
5. JOB DONE. Well Done YOU DID IT!!
Useful Information
How to get into your Bootloader
1. Turn your phone off
2. Press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear.
3. To exit Bootloader you need to remove your back cover and pull the battery out for a few seconds, then replace it and press the power button to reboot your phone.
How to perform a HardReset
Hard Resetting deletes ALL personal data and settings and restores your phone to factory default conditions as if you turned on the phone for the first time after purchasing.
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
"This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel."
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
You can also use Clear Storage to reset your device back to factory default settings.
1. On the Home screen, slide to the Settings tab and then tap Menu > All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.
Make sure you back up all your data such as Contacts, Appointments, messages etc or they will be gone forever.
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.

FAQ FOR FLASHING HTC HD2 (LEO)
Q. I can't get it working I need help.
A. If you need help you do need to provide as much detailed information as possible or we cant do anything.
What process are you trying to do? Installing HardSPL? Flashing Radio? Flashing Rom?
List each step you completed and where you got the error with the exact error code you was given if you got one.
Also exactly what operating system do you have on your pc?
If you do not provide this and just leave a message saying "I cant get it working, what do I do?" then I will know you havent looked at the FAQ before posting and you will be referred here.
--------------------------
Q. What is a Radio?
A: The Radio is the Firmware that works between the Operating System and the Cellular Hardware. It handles the Sound, Camera, GPS, Bluetooth, Wifi, Phone Calls, etc. The Radio must be compatable with the ROM's Operating System or you may experience problems with your sound and camera.
--------------------------
Q: What is the difference between SPL, SSPL and HardSPL?
A: SPL (secondary program loader) is part of the firmware that allows your phone to flash Roms, Radios, Splash Screens. Carrier locked so you can only use it to flash Roms from your own carrier.
SSPL (soft secondary program loader) is a temporary way to allow your phone to flash custom roms only (not radios). This doesnt give your phone the protection that HardSPL gives you.
HardSPL (as the name sugests) is installed permanently and allows you to flash anything to your phone. Its patched to protect you against bricking in the event of a bad flash and will let you get back into the bootloader to restore your system when a stock SPL wont. Always the best thing to have.
---------------------------
Q: What is the difference between ROM and RADIO?
A: The Rom is the operating system and included patches, tweaks and programs. The Radio is a seperate part of the firmware on the phone that handles all communation related matters such as signal, gps, bluetooth, camera, wifi and sound. Newer Radios to include improvements or fixes in older version, or even just to compliment an existing Rom or network so a newer Radio isnt neccessarily better. Radios also need to be matched to the correct Rom so you cant just put any Radio and Rom together.
---------------------------
Q: How do Stock ROMS differ from Cooked ROMS?
A: Stock Roms usually have extra 'bloatware' added which take up extra space on the phone. Custom Roms are stripped down to provide more space and most are tweaked to provide a faster more stable Operating System. Every chef is different so you have to look around the forums to see which Rom is best for your needs.
---------------------------
Q: What happens if I flash a Stock Rom via microSD Card?
A: Flashing a stock rom via microsd card will overwrite your rom, radio, splashscreen and SPL with the ones included on the stock rom. With previous devices I believe the HardSPL couldnt be overwritten this way but as bepe developed this version it must have been done differently. Stock Roms can safely be flashed via activesync and this method will flash the Rom, Radio and SPlashscreen but will not overwrite the HardSPL with a Stock SPL.
---------------------------
Q: Can I download official roms from the HTC Website?
A: Use the following serial number on the respective HTC site (thanks to mooooooa):
World Wide English (WWE) - Serial: HT9AZNW00968
South East Asia (Asian WWE) - Serial:HT01XNW03437
Denmark: (DAN) - Serial: HT9B6NW00167
Norway: (NOR) - Serial: HT9C7NW01234
France: (FRA) - Serial: HT9BLNW00122
Spain: (SPA) - Serial: HT9BDNW00592
Italy: (ITA) - Serial: HT9BCNW00722
Greek: (ELL) - Serial: HT9BMNW00059
Germany: (GER) - Serial: HT9B9NW00374
Netherlands: (NLD) - Serial: HT9AVNW01232
Russian: (RUS) - Serial: HT9BCNW00012
Turkey: (TUR) - Serial: HT9CMNW05766
East Europe: (WWE_EastEurope) - Serial: HT9B3NW02204
---------------------------

Hi Guys. I posted the text below a few days ago in the general section/questions thread but it seams the thread is not so popular .
I just got my hands on the pre-production LEO device (demo device I guess) and I have a couple of questions (this is my first WiMo phone, I have experience with Android and Symbian devices).
Pre-production devices seem to be "unlocked". Besides being SIM unlocked it seems to be SuperCID-ed as well. The latter obviously allows me to flash stock ROMs regardless of the county signature, right?
Now how about cooked ROMs? I persume I would need HardSPL as any other production device? Or does SuperCID have anything to do with the HardSPL?
or
Having the SuperCID-ed device I don't need the GoldCard?
I have tried searching the forum but I believe that my lack of WiMo terminology is slowing me down.
Thanks for any input in advance.

Hi I was hoping you could answer a few of my queries on flashing ect
1. SSPL seems like a better path to go down as it stops any warranty voiding, which means I can still get my phone repaired in the future - good . However how come most people always wait for HSPL? Im guessing its because HSPL only has to be ran once or something, so everytime you want a new rom from then on, theres no need to flash so no risk of bricking? Whats the pro's and con's of using HSPL or SSPL ? ( I personally was more keen on SSPL as my warranty isnt affected )
2. How come some rom chefs say that their roms cant be used with SSPL and you have to wait for HSPL ???
3. What are the possible errors/outcomes when something goes wrong when flashing with SSPL? how does a phone become bricked and are there any ways to recover it?
4. Whats with goldcard? is that only when someone needs to flash official roms if there particular leo is branded to a particular GSM? Mine is an unbranded, unlocked model so will I never have to worry about goldcard?
5. If my device does become bricked and there are no ways to unbrick it, what can I do to get a repair ect? someone suggested bunging it in a microwave for 10 seconds and then sending it off under my warraty claiming that I turned the phone off one day, and the next it wouldnt turn on (seems quite a clever idea, but a little extreme)
6. Can someone explain to me all about the radio? it seems to be a key part in flashing. What is it exactly, Im guessing its more complex than the fm radio lol, but I dont understand what it does to the phone, and I see only certain radio versions and compatible with certain rom versions. Also I see that flashing wih SSPL means you can only change OS's and splash screens, so will that create certain problems if you want change the radio version?
7. Im planning on flashing to THIS rom, for speed and performance while keeping some eye candy (Also I want to try windows mobile 6.5.3) is this a good choice?
Thanks all my questions for now, I would be SO appreciative if you guys could help me out as flashing is quite a scary concept for a £500 device

I hope someone will help me

GregorVucajnk said:
Hi Guys. I posted the text below a few days ago in the general section/questions thread but it seams the thread is not so popular .
I just got my hands on the pre-production LEO device (demo device I guess) and I have a couple of questions (this is my first WiMo phone, I have experience with Android and Symbian devices).
Pre-production devices seem to be "unlocked". Besides being SIM unlocked it seems to be SuperCID-ed as well. The latter obviously allows me to flash stock ROMs regardless of the county signature, right?
Now how about cooked ROMs? I persume I would need HardSPL as any other production device? Or does SuperCID have anything to do with the HardSPL?
or
Having the SuperCID-ed device I don't need the GoldCard?
I have tried searching the forum but I believe that my lack of WiMo terminology is slowing me down.
Thanks for any input in advance.
Click to expand...
Click to collapse
If your phone has been CID Unlocked (SuperCID) then you will be able to flash Stock Roms from other carriers but I think you will still need to use SSPL to flash Cooked Roms.
Hope that helps.

[★] said:
Hi I was hoping you could answer a few of my queries on flashing ect
1. SSPL seems like a better path to go down as it stops any warranty voiding, which means I can still get my phone repaired in the future - good . However how come most people always wait for HSPL? Im guessing its because HSPL only has to be ran once or something, so everytime you want a new rom from then on, theres no need to flash so no risk of bricking? Whats the pro's and con's of using HSPL or SSPL ? ( I personally was more keen on SSPL as my warranty isnt affected )
2. How come some rom chefs say that their roms cant be used with SSPL and you have to wait for HSPL ???
3. What are the possible errors/outcomes when something goes wrong when flashing with SSPL? how does a phone become bricked and are there any ways to recover it?
4. Whats with goldcard? is that only when someone needs to flash official roms if there particular leo is branded to a particular GSM? Mine is an unbranded, unlocked model so will I never have to worry about goldcard?
5. If my device does become bricked and there are no ways to unbrick it, what can I do to get a repair ect? someone suggested bunging it in a microwave for 10 seconds and then sending it off under my warraty claiming that I turned the phone off one day, and the next it wouldnt turn on (seems quite a clever idea, but a little extreme)
6. Can someone explain to me all about the radio? it seems to be a key part in flashing. What is it exactly, Im guessing its more complex than the fm radio lol, but I dont understand what it does to the phone, and I see only certain radio versions and compatible with certain rom versions. Also I see that flashing wih SSPL means you can only change OS's and splash screens, so will that create certain problems if you want change the radio version?
7. Im planning on flashing to THIS rom, for speed and performance while keeping some eye candy (Also I want to try windows mobile 6.5.3) is this a good choice?
Thanks all my questions for now, I would be SO appreciative if you guys could help me out as flashing is quite a scary concept for a £500 device
Click to expand...
Click to collapse
1. HardSPL is always the best way to go if available as once you have it on your phone theres minimal chance of bricking than flashing without it as you will always be able to get back into the bootloader to flash a stock rom if anything goes wrong. Even if you put HardSPL on your phone you can always flash back a stock SPL in the event you need to return it for warantee purposes.
2. I would guess that those Roms include maybe a Splash Screen or Radio which cant be flashed using SSPL.
3. Theres always a chance that something can go wrong in whatever you do. HardSPL gives you the ability to get back into the bootloader and flash a stock rom if you need to recover your device.
4. GoldCard is for flashing Stock Roms from other carriers. If your phone is unlocked then that means it is sim unlocked and not carrier unlocked (SuperCID) therefore you would still need to use goldcard if you wanted to flash a Rom that isnt directly from your carrier.
5. If your phone does become bricked and you dont have HardSPL to recover it then there are many ways you can try to get a new one under warantee. My favourite is pouring sulphuric acid over it and saying aliens broke into your house and tried mating with it but you can go with your own idea if you want to lol.
6. The Radio really isnt a radio haha. Its a seperate firmware that handles all the communication related parts of the phone. This includes the signal, bluetooth, wifi, sound, camera and gps. Until HardSPL is released the only way to change the Radio is to flash a stock rom which always includes a radio via goldcard method.
7. Thats the cooked Rom I flashed on my phone yesterday and its a very fast and stable Rom with no bugs that I can see. The download exe file includes the SSPL so unless you want to change the radio first its just a case of synching and flashing.
Hope these answers helped and good luck with your flash. The first one is always the hardest but do everything by the book and you shouldnt have any problems

Thanks for all the help, Im glad I didnt flash with SSPL just yet, I think I will wait for HSPL as it seems that I can still get my warranty back with it (but I just thought, what if you had to send it in for it not turning on or something, and they found a way to get it running, they would then see the spl was changed as I would not have had the chance to change it back)
mskip said:
1.
4. GoldCard is for flashing Stock Roms from other carriers. If your phone is unlocked then that means it is sim unlocked and not carrier unlocked (SuperCID) therefore you would still need to use goldcard if you wanted to flash a Rom that isnt directly from your carrier.
Click to expand...
Click to collapse
that isnt directly from your carrier? what do you mean, mines totally unbranded and sim free ect, so It doesnt come from a carrier, meaning I dont need goldcard right?
(Heres another question while your around, I went to send a massive text to all my contacts, ( I changed it in the registry so I could have more than 10 recipetents so thats not the problem) wishing them a happy new year, and It appears that it is not working, even after applying the hotfix some messages are in the outbox and some in the sent items folder. Whats with that?
Thanks so much for answering, especially this early in the year/morning (haha) happy new year to you sir!

[★] said:
Thanks for all the help, Im glad I didnt flash with SSPL just yet, I think I will wait for HSPL as it seems that I can still get my warranty back with it (but I just thought, what if you had to send it in for it not turning on or something, and they found a way to get it running, they would then see the spl was changed as I would not have had the chance to change it back)
that isnt directly from your carrier? what do you mean, mines totally unbranded and sim free ect, so It doesnt come from a carrier, meaning I dont need goldcard right?
(Heres another question while your around, I went to send a massive text to all my contacts, ( I changed it in the registry so I could have more than 10 recipetents so thats not the problem) wishing them a happy new year, and It appears that it is not working, even after applying the hotfix some messages are in the outbox and some in the sent items folder. Whats with that?
Thanks so much for answering, especially this early in the year/morning (haha) happy new year to you sir!
Click to expand...
Click to collapse
If it was sim free then you might be ok flashing any stock rom but I cant garentee it. It will soon tell you if you cant so give it a go.
Might just be overloaded as there are quite a few people texting at this time and I havent been able to send a text on my phone for the last hour lol. Thats why I always send mine out early to beat the queue
Happy new year to you too I hope you have a great one

So many thanks
So many thanks.Happy new year....

mskip said:
If it was sim free then you might be ok flashing any stock rom but I cant garentee it. It will soon tell you if you cant so give it a go.
Might just be overloaded as there are quite a few people texting at this time and I havent been able to send a text on my phone for the last hour lol. Thats why I always send mine out early to beat the queue
Happy new year to you too I hope you have a great one
Click to expand...
Click to collapse
ok maybe thats it but whatever, I might try and apply some fixes for the sms ive seen around here. Hey when do you think the HSPL will be out, Im itching to flash my device

Official ROM upgrade - error 260
I have downloaded the official 1.48 upgrade exe from HTC. I have a choice of computers, win 7 64 bit or win xp 32 bit on which to do the update. I have tried both following the instructions within the package and both get to the verification stage and stop with error 260 - no connection. Can anyone tell me precisely what to do to get around this?
My HTC is a purchased unlocked device and I can explore the 16 GB card via Explorer on either PC

dixie dean said:
I have downloaded the official 1.48 upgrade exe from HTC. I have a choice of computers, win 7 64 bit or win xp 32 bit on which to do the update. I have tried both following the instructions within the package and both get to the verification stage and stop with error 260 - no connection. Can anyone tell me precisely what to do to get around this?
My HTC is a purchased unlocked device and I can explore the 16 GB card via Explorer on either PC
Click to expand...
Click to collapse
I would recommend using the windows xp system to flash as its more stable.
What method did you use to flash the Rom? You need to do it via GoldCard method described just follow the link in the first post and follow all the instructions to the letter.

mikashakira said:
So many thanks.Happy new year....
Click to expand...
Click to collapse
Happy new year to you too and the best for 2010

MSkip
I was following the instructions given in the ROM Upgrade software downloaded from the HTC site. It undertakes a verification of your phone software, but for some reason keeps saying it cannot connect with it. I had it connected via a USB cable. Maybe I need to speak with HTC on Monday.
I thought it might be Kaspersky stopping it, but switching that off didn't fix it. Perhaps I haven't got the computer sync'd correctly with the phone. Its not very obvious.

dixie dean said:
MSkip
I was following the instructions given in the ROM Upgrade software downloaded from the HTC site. It undertakes a verification of your phone software, but for some reason keeps saying it cannot connect with it. I had it connected via a USB cable. Maybe I need to speak with HTC on Monday.
I thought it might be Kaspersky stopping it, but switching that off didn't fix it. Perhaps I haven't got the computer sync'd correctly with the phone. Its not very obvious.
Click to expand...
Click to collapse
Even if you have an unlocked phone you may still have to use the goldcard method to flash a stock rom.

SOLVED
Simply needed to instal WMDC.

dixie dean said:
SOLVED
Simply needed to instal WMDC.
Click to expand...
Click to collapse
yh that would help lol

Has anyone got any ideas on when a hspl is coming out?

[★] said:
Has anyone got any ideas on when a hspl is coming out?
Click to expand...
Click to collapse
No set date you will just have to be patient like the rest of us

T-Mobile HD2 with serious problems

Firstly sorry for the long post.
I'm having a few problems with my HD2, and I'm looking solutions that dont involve flashing the t-mobile ROM (which is 1.43.110.2). I have all the HTC patches installed.
The problems I'm having are ...
*Favourites are disappearing sporadically. I cant figure out whether they're going when I sync it up or just purely at random. They stay on the internet tab but disappear from the favourites menu. Folders are not affected.
*Music player: Lags. I have to wait about 2-3 minutes before a song starts playing on the first attempt, then its fine. This happens even if the little spinning circle hasn't appeared (this appears after you have updated the storage card by syncing with media player). Also when sliding album art back and forth in landscape mode, it freezes, and then jumps back to the beginning of the stack. Didn't used to do this.
*Music Sync - my biggest nightmare right now; I really need help on this one! Sync in windows 7 windows mobile device manager works fine. When I load up WM player and attempt to sync the storage card however, the device will sync for a couple of minutes, and then soft reset itself.
Hopefully when 6.5.3 comes out officially HTC will roll up all the crappy patches and T-mobile will approve it... but until then I'm stuck with these annoyances (in addition of course to crappy SMS, constant crashing, lags etc., which I certainly wasn't expecting when I got my shiny new HD2

I was in a similar boat to you. The Tmo ROM is really poor and I hate to tell you this but 1.48 or 1.61 are the answer.
If you really can't consider that option, I'd say that you should do a hard reset and see what issues you still have with a fresh ROM. The original T mo ROM is on here somewhere. download that as a backup before you do anything, just for safety.

realy sorry mate but he is right try and see if you can get hole of a free goldcard i run 1.48 insted of t-mob its not purfect but worls alot better

Thanks for your responses. I guess flashing is the only option, cos right now this phone really is virtually unusable. I'll have to try and get my head around the whole goldcards thing but if I get stuck I'll start a new thread...
Thx!

severeano said:
Thanks for your responses. I guess flashing is the only option, cos right now this phone really is virtually unusable. I'll have to try and get my head around the whole goldcards thing but if I get stuck I'll start a new thread...
Thx!
Click to expand...
Click to collapse
Hi mate, had the same issue. The gold card thing isn't too bad, theres a great idiots guide on here that I used, the hardest bit is getting the number off the MicroSD card, dont do what I did and lose all my data on it (as you edit some values which makes Windows no longer recognise it sometimes). Take a copy of whats on there just incase. Again there is a post that mentions a way of reversing the change so you have lost all your data on the memory card.
Good luck, I did without any probs to flash from 1.43 to 1.48 using the Goldcard method

I have the same problem with favourites and i'm on the 2.02 ROM. I never touch IE on my computer though so i've not put much thought into what happens with the sync. I'm just throwing together a wee app to sync it with Firefox though so that will solve my issues.
As for synching it with media player (and i'm old school - I drag and drop files), could there be any corrupt/unrecognisable data in your playlist? You could try a drag/drop dump of music onto your device and see if that works.

severeano said:
Thanks for your responses. I guess flashing is the only option, cos right now this phone really is virtually unusable. I'll have to try and get my head around the whole goldcards thing but if I get stuck I'll start a new thread...
Thx!
Click to expand...
Click to collapse
There is now HSPL and SSPL available so goldcard is no longer required, using SSPL or HSPL is much easier too

Hi, I converted my T-Mobile HD2 to 1.48 using SSPL. After a couple of teething troubles with Firewalls and a hanging Activsync - fixed with a PC restart it worked just great. It scared me twice when it hung in the boot loader but taking the battery out and restarting fixed it. I made a goldcard aswell just in case but do not really know if it would have worked.
Now its loaded The HD2 seems faster, has more programs and the battery seems to last longer particularly with WLAN.
I still have 1 open question though that I have, touch wood, not had to find the answer for yet. If I do a hard reset which ROM reboots, T-Mobile or the 1.48? Perhaps somebody here knows? I would be grateful to find out before I have to try it out.
Good luck and hopefully it works as well for you.
Bedwar22

i believe if you hard reboot it will revert to the Tmobile rom.. as you used SSPL... only if you do a HSPL will it stay... correct me if i'm wrong guys

nutmegy said:
i believe if you hard reboot it will revert to the Tmobile rom.. as you used SSPL... only if you do a HSPL will it stay... correct me if i'm wrong guys
Click to expand...
Click to collapse
Incorrect...your Rom does not change regardless of flashing method SSPL or HDSPL. If using the SSPL method a hard reset will remove the SSPL only, and your SPL ONLY will revert back to original, Your latest Rom does not change....

Thanks for the quick responses guys but I am still a bit confused - sorry.
Perhaps in laymans terms -
If I have to hard reset, when the phone reboots will I get all of the T-mobile c**p again and have to go through the SSPL process again- which is not easy when on a business trip, or will I keep the HTC version.
If as I think I understood from band27 I get the HTC version back but lose the SSPL what effect will that have?
thanks again

No, When you hard reset you will get exactly the same ROM as you have before you hard reset. IT will be just like the first time the phone booted after you initially re-flashed it.
The only way to return it to T-Mobile's ROM is to find the download that 'football' posted a few weeks ago and flash it.

Plz let a noob continue this question
If i use SSPL to flash a cooked ROM and for some reason want to go back to a original ROM, how?
Is it correct that i only take my original ROM and flash it as usual, or do i need to do annything els?
Do i need a goldcard?
Plz help a noob

New ROM for T-Mobile (UK) help needed

Hello.
This is my first post, so please be kind to me!
I've spent the past few weeks trying to get my head around what to do in order to flash my HD2 which is on the t_mobile network
The original rom 1.43 i think is driving me crazy and I now dont care if I change the rom and it invalidates the warenty!
In order to HSPL I need to SPL first, but will my device allow this?
I've read through so many threads that I am completely confused and dont know which way to turn, never mind which thread to re-read.
Can someone point me to the sspl, HSPL to upgrade to 1.66
Thanks
Glyn
oh its the 512 version

you are over confusing yourself.
download hspl 2
instal it - choose whichever hspl you like (may as well go for 2.08.hspl)
flash whatever rom you like from usb. (don't forget to flash a compatible radio either before or straight after.)

Thanks for your reply......
so downloan the HSPL from here?
'forum.xda-developers.com/showthread.php?t=609477'
and as I run the program I'll get the option of which version to install?
What should I look for to make sure that the radio is compatible with the rom?
Thanks again and sorry for my ignorance
Glyn

best thing you can do is to read a lot. No need to do enerything in one mad dash.
get HSPL2 from HERE - end of the first post (but read the post, dont just skip to download, )
run it as administrator (right click, run as administrator)
for best results use a usb port on the back of your PC (i.e one directly on teh motherboard, not an external usb slot) it will ask what version you want to install. just go for 2.08.hspl (not 2.08.0000) and let it do its thing. the authors say you should match the version to the rom (so 1.43.hspl for roms that are 1.43 or 1.48, 1.66.HSPL for 1.6 based roms, etc, but it isn't critical, most will run on any HSPL, so dont go changing every time you flash a new rom, no need. If it doesnt work then change it.)
As for radio tips, a radio with .51. in the number, (eg 2.09.51.03) will NOT work with any rom that has the 576meg ram, enabled.
If you flash a rom and all you get when you restart is a grey screen, chances are the radio doesnt match. Boot to bootloader and flash the radio.
But most of all, read stuff.

What about shipped rom's that are .exe files? Do they include radios with it? Also, is there a post you can point me to that has a list of compatible radios with different rom's?

that's where reading comes in. the whole process has so many variants that there is no simple "a b c" that covers everything.
yes the exe includes radio (and also spl if you use sd card to flash -stay away from sd card, use usb and if anything goes wrong you just boot to bootloader and re flash)
the chefs give you all the infoyou need in the first couple of posts. the sticky threads in the rom development section will tell you how to do everything, and any problem you encounter has beenwritten about already. so read,search and read.

I suggest you flash Stock WWE 1.66 ROM first so you can have a feel of how much improvement
has been done from 1.43
you can download it in HTC website.

Thanks for your help so far..
I would like to go for the 1.66 official ROM first, so I'll find that on here first and find the exe file so I dont have to mess about with compatible radio's.
Just before I HSPL it, I would like a copy of the original 1.43 T-Mobile ROM, so better get searching.
Thanks again
Glyn

the original 1.43 T-Mobile ROM is on HTCs website so get it from there as a backup

THANKYOU!!
Thankyou so much for your help and guidance.
Last night I decided to just do it - the phone was so poor I couldn't take it anymore.
3 hours from start of backing up, to installing HSPL2, to flashing with 1.66, anf then restoring data
I cant believe the transformation - I am so pleased I didnt throw it at a wall!!!
So a massive thanks to the members of this community

im in the same boat... got a stock uk hd2 on tmobile and wasn't to flash a new rom but the information is overwhelming and im scared I will flash a wrong rom and kill my phone :0)

Chivalryyyy said:
im in the same boat... got a stock uk hd2 on tmobile and wasn't to flash a new rom but the information is overwhelming and im scared I will flash a wrong rom and kill my phone :0)
Click to expand...
Click to collapse
theres nothing to it. the 'normal' hd2 which you do have, is about the safest phone to flash in the world today, with HSPL2. The 'radios killing phones' problem that started last week is specific to the t mobile US model only, , the one with 1 gig rom.
If you install HSPL on your phone, and then only flash over USB, the very worst that will happen (from a software point of view) is that the phone stops at a grey screen, and/or only boots into bootloader, so you boot into bootloader, you flash something else, and it's fixed.
The T Mo UK stock rom is available to download as backup, (as is o2 and voda for anyone looking) in the 'LEO official roms' thread in rom development, first post, first link, first folder (1.43)
At any time, you can flash that rom from sd card (look it up if you need to) and restore everything, spl, radio and rom, , to factory settings.
In all honesty, so long as you are careful, methodical, don't pull out USB cables halfway through, laptop battery dies, etc , then you are more likely to get bricked from some freak incident, like , umm, battery dieing, heh.
Fear not! be smart, be careful, try to understand what you are doing and why at each step, read up on what an spl is, and the job is , as they say, sorted.

RE: Please Help
rockthebus said:
Thankyou so much for your help and guidance.
Last night I decided to just do it - the phone was so poor I couldn't take it anymore.
3 hours from start of backing up, to installing HSPL2, to flashing with 1.66, anf then restoring data
I cant believe the transformation - I am so pleased I didnt throw it at a wall!!!
So a massive thanks to the members of this community
Click to expand...
Click to collapse
Hi Guys
Can you help me...
How do i back up the phone before adding HSPL?
is this neccesary and where do i get the stock rom copy from.
i got the phone this week and hate it in its present form... can't even watch youtube.
looking to update to avoid sending back
Regards
mkhonat

re:
samsamuel said:
theres nothing to it. the 'normal' hd2 which you do have, is about the safest phone to flash in the world today, with HSPL2. The 'radios killing phones' problem that started last week is specific to the t mobile US model only, , the one with 1 gig rom.
If you install HSPL on your phone, and then only flash over USB, the very worst that will happen (from a software point of view) is that the phone stops at a grey screen, and/or only boots into bootloader, so you boot into bootloader, you flash something else, and it's fixed.
The T Mo UK stock rom is available to download as backup, (as is o2 and voda for anyone looking) in the 'LEO official roms' thread in rom development, first post, first link, first folder (1.43)
At any time, you can flash that rom from sd card (look it up if you need to) and restore everything, spl, radio and rom, , to factory settings.
In all honesty, so long as you are careful, methodical, don't pull out USB cables halfway through, laptop battery dies, etc , then you are more likely to get bricked from some freak incident, like , umm, battery dieing, heh.
Fear not! be smart, be careful, try to understand what you are doing and why at each step, read up on what an spl is, and the job is , as they say, sorted.
Click to expand...
Click to collapse
Hi samsamuel,
Sorry to msg you like this.
i have purchased a T mobile HTC HD2 which came with the stock 1.43 ROM.
I want to put 1.66 on but don't know how.
I've read the forum and looked on youtube but confused.
Do you have an idiots guide?... i really am an idiot when it comes to stuff like this!
I have downloaded HSPL2 file.
I have downloaded the back up 1.43 Stock Rom
Do i need to download the 1.66 ROM now and how do i update?
please excuse my ignorance and i am happy to donate if you can help.
Kind regards
Mkhonat

RE:
Hi Samsamuel,
Thanks.. just one more thing.
Saw on youtube that i have to format my SC card
youtube.com/watch?v=nrmlqrfCvas[/url]
is this so and is this referring to the sd card in the HTC or my own sd card used to download the 1.66 onto?
regards
mkhonat
PS. why won't this forum allow me to send you a PM?.. i can't send any msg's at all.

New (used) HD2 - Where do I stand?

I'm searching and reading various threads to try to get a grasp of where I stand but I haven't had a WMO phone in so long that it's taking me a little bit to get reacquainted with the process. That said, I traded my iPhone for an HD2 and my guess is that the guy had modded this a bit but I don't know what "stock" is for the HD2 and all that jazz. So here's what I have sitting in front of me:
SPL 2.08.HSPL
ROM version: Kumar's TMob P1.4 WWE
Radio version: 2.08.50.08_2
Flash size: 1024
Now, the phone's a little buggy from time to time in that the wrong time will display and the phone will lock up and need to be hard booted to get it going again and I'm wondering if it's because of the set up that's installed on it or what not? I'm going to keep researching and re-teaching myself on how to install custom ROMs and find one that I think will suit me best (it should come back to me in a bit ... the basics anyway) but if you guys could help me out and let me know where I stand and some suggestions on where I should go from here, that would be cool. I know this is a n00b question but I also know some of you enjoy helping people learn. I'm not asking for anyone to teach me how to do all of this ... I can learn that from the various threads.

i assume this is a TMOUS HD2?
one piece of advice i'll give you is not to flash your radio to any of the .51 variants as it will brick your phone.
eg. your radio is 2.08.50.08_2 -> do not get one with .51
radio's control your communications, 3g, wifi, sms, chatting etc and has effects on battery life
spl 2.08 HSPL means your phone is unlocked and you can run any ROM you like (CHECK FOR COMPATIBILITY WITH US TMOB) -> download HSPL2 and you can change this to w/e version you like.
kumar is one of the ROMS available.
if your phone is buggy i recommend looking at the task 29 stickies, these format your phone so you can install a new rom on a fresh device

Oh, yes, sorry ... TMOUS.
That's exactly the kind of feedback and guidance I'm looking for. Thank you very much. I'll make sure to refer to this as I go. At least I can be a little pleased that he did some of the work for me by unlocking it ... less steps for me.
Other feedback is welcome and appreciated.

a few pointers.
the 1024 flash size means it is a t mobile us (tmous) version.
most things will work just fine, there are two things you really need to know.
roms - your phone will only take roms based on version 2.1. find your roms in the tmous dedicated rom development section, not this rom development section. if you flash thee wrong rom the phone will hang at the boot screen, but is not permanent.just boot to bootloader and re flash.
radio - this is IMPORTANT. any radio with a 51 in the version WILL KILL YOUR PHONE STONE DEAD.
so example a radio called 2.09.51.x will destroy your phone, no known way to fix at the moment.
radios with a 50 in the version are fine. example 2.08.50.x will work.

in response to the other poster, you should only use spl 2.08.hspl, since thee only roms that work are 2.1 it would be pointless and possibly risky to use any lower version of spl/hspl

Okay, awesome. Thank you. You guys rock. I appreciate the help.

.cab files are the windows mobile setup files, they can be ran straight from your phone.
when you download a ROM, you will be given a .nbh file and an installer .exe, the installer and the ROM must be placed in the same folder.
to enter the phone's bootloader, hold down the VolumeDown key while turning on your phone, here you can also install ROM's without having to start the phone, especially useful because if you flash a ROM while the phone is on, battery checks etc will prevent you from flashing, very annoying if you have 49% battery, flashing from the bootloader prevents this.
hard resetting your phone (recommended after ROM flash): press the power button to turn on the phone WHILST holding down both VolumeUp and VolumeDown buttons, press VolumeUp when prompted, this is a hard reset, it simply wipes data from the phone and makes it setup like when you first got it.
currently on your Today screen on the phone, I presume there are 3 icons, and when you scroll down there is a 3x3 grid in which you can add icons to, do a search for Cookie's Home Tab, it adds more links, more functionality, and generally looks much better

You guys are awesome. I know it's frustrating to explain the basics over and over but I appreciate the time you've taken to respond.

Okay, I successfully ran task 29 and then installed a stock ROM (with radio 50) and everything seems to be working well. I think I'm going to leave it like this for a bit and see what I like and don't like about the stock ROM and then I can make a better choice about which ROM to go with if I decide to customize. I sincerely appreciate your help, guys.

sounds like a good idea
I'm glad we were of help