Related
Hi guys, I installed the Windows Live Package from http://www.live-messenger.nl/download/WindowsLive.PPC2005_ARM.CAB. It worked perfect, now i wanted to know how much memory this app costed, so i uninstalled it again. But when i tried to install it again, it failed When i open the cab, it loads approx. 5 seconds in the installer, then the installer says Installation of WindowsLive.PPC2005_ARM.CAB has failed Anybody suggestions how i can get this work??
p.s. Without a hard reset
I have also done the same thing and get the same error. I had to uninstall Windows Live Mobile because I was getting an error everytime I tried to launch Live Messenger. Now I can't re-install it again.
I have 2 main ideas:
1st.: Microsoft is cutting the service from these "un-official" releases of their software, as they are trying now to sell Windows Mobile 6 and Windows Live can't be downloaded or installed let's say "legally".
2nd. (which doesn't affect the first one): Microsoft recognizes the WLM software as not pre-installed or being installed on a Windows Mobile 5 device and tells the client to get "blocked", I mean, it writes some values to the registry and prevents being launched or installed again showing the empty error message I had before unistalling it.
Someone can verify any of my ideas or bring a solution to have WLM working again on our WM5 devices?
Thanks in advance.
Romero i've found the problem! I got my hands on an UNdated UNrestricted version. As you said mic. just cut the WLM off. I do not knowe why but here is the fix http://forum.xda-developers.com/attachment.php?attachmentid=36364&d=1175459584
fdez.romero said:
I have also done the same thing and get the same error. I had to uninstall Windows Live Mobile because I was getting an error everytime I tried to launch Live Messenger. Now I can't re-install it again.
I have 2 main ideas:
1st.: Microsoft is cutting the service from these "un-official" releases of their software, as they are trying now to sell Windows Mobile 6 and Windows Live can't be downloaded or installed let's say "legally".
2nd. (which doesn't affect the first one): Microsoft recognizes the WLM software as not pre-installed or being installed on a Windows Mobile 5 device and tells the client to get "blocked", I mean, it writes some values to the registry and prevents being launched or installed again showing the empty error message I had before unistalling it.
Someone can verify any of my ideas or bring a solution to have WLM working again on our WM5 devices?
Thanks in advance.
Click to expand...
Click to collapse
neither of those are correct, the reason is thats its a beta and expired at the beginning of the month. therefore you cant run the program or install it. just get a new beta version by signing up to Microsoft Connect or use the older version thats been extracted from wm6 thats floating around here.
Try it, like the worker:
WindowsLive.PocketPC_50_arm.cab
Thank you very much ASerg!
The version The Dutchman posted was in English, but I find out that the Aserg's file was several kB bigger... That made me think and decided to install this bigger one and finally got Windows Live Mobile working in Spanish, just like before my beta had expired.
So thank you again guys!
First of all, I had some minor problems getting Activesync to recognize my 8525. (XP, Net 2.0). After a couple of driver updates or whatever, it finally worked!
I tried flashing to a different ROM but had problems during the HardSPL procedure. I stopped it, but THEN had some problems trying to connect my 8525 to the PC!! (Activesync again, ugh!) I uninstalled & re-installed Activesync like 3 times, and FINALLY got it to work again!
Now I have problems installing .CAB files to my 8525. I keep on getting the warning:
"The program is from an unknown publisher. You should install it only...."
I press "YES" and it comes as "unsuccessful".
I press "NO" and I get the "... program cannot be installed because it is not digitally signed with a trusted certificate".
Besides having installation problems, I also noticed that Activesync keeps on disappearing/uninstalling from my PC. I have to install Activesync 4.5 every time I turn on the PC.
Can some one tell me what's going on? What should I do? Should I do a "HARD RESET"? (I have done a SOFT RESET but to no avail). I would appreciate some help. Thanks!
I found out that I shouldn't do a HARD RESET because it will erase the "unlocked" feature in my phone. (I bought the phone unlocked).
I have researched the wiki, and some threads, and ACTUALLY someone else had this problem, way back in 2006. (The .CAB problem). But no one responded.
I also had to uninstall a program I had previously installed in my 8525 due to the fact that it stopped responding. It just wouldn't work anymore. I got the same "unsigned certificate" message.
I guess I'm going to RE-INSTALL Activesync ALLL over again. Maybe it will help it or something...
(This is literally going to be like the 5th time I install Activesync. And I just got the 8525).
IF ANYBODY CAN HELP ME WITH THE .CAB PROBLEM I WOULD APPRECIATE IT.
(I'm running WM6 Pro, AT&T)
freakin piece of crap!
its STILL NOT WORKING!!!!!
It USED TO WORK! I used to be able to install .CAB files. I have only installed 2 .cab files into internal memory (NO external. dont have one yet). I installed Opera Mini, and Wifi Radar. I also installed a couple of themes. I also installed animated themes but deleted them since they wouldn't work. (I think they required some other stuff). I also deleted all the themes except for one.
THEN one day, i tried doing that HardSPL-V7, and I got to the last step but quit since I got an error telling me that if I continue the (usb?)device could stop working.
Another time I tried installing SPB Finance 2.8 .CAB and that's when I noticed it would no longer install .CAB files. (It also won't install directly using .exe)
I researched Google and the forums, and found out a guy that had the same problem (no one responded).
Today I noticed that Pocket Wifi Radar wouldn't run. It said something about the certificates. I uninstalled it, tried to install it again, but it wasn't successful.
So far this has been the history of my 8525. Could it be because the "certificates" were installed in the ORIGINAL computer profile? Since I have installed Activesync many times, I noticed every time it creates a new profile. For example, the first time it was called "Windows PC". Then it was called "Windows PC2". Just right now I installed it again, and it was going to be named "Windows PC3", but I changed the name to something else, and of course it still didn't work.
Could ANYBODY give me some tips as to what I should do? Thank you.
go to settings>connections>usb to pc. uncheck "enable advanced network functionality".
if it syncs a few times with no problems run unlocker tool found in upgrades section. then hard spl then if you feel game enough upgrade os with one of your choice.
Hope this helps... cheers
holy cow, relax guy. you are not the only person to ever get the not digitally signed message.
http://www.google.com/cse?cx=000825...igned&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
as for the hardspl problem, i responded to that thread you created, didnt you see?
Ok, I tried what you mentioned ultra, and I got this message upon connecting the 8525 to the PC. (BTW, this is the SAME message that appeared when I was attempting to install HardSPL-V7),
HTC USB Sync
has not passed Windows Logo testing to verify its compatability with
Windows XP.
Continuing your installation of this software may impair or disabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
I pressed "Continue" and it installed HTC USB Sync. But then I got the a message telling me "Activesync 4.5 or greater needs to be installed" (even though it IS installed). I ran through the setup again, and it would only let me "repair" or "uninstall". I pressed "repair". Afterwards it asked me to "restart". I did. Then upon loading back up, I connected the 8525 to the PC again, and I got the SAME message again (the one about it not passing Windows Logo). This time I pressed "STOP" and then I got the message about HTC USB Sync not being installed in the computer.
I have been fed up with the problems the 8525 has been giving me. My Clie UX was so much easier to manage. Quick question, I am REALLY leaning on doing a HARD RESET, but I think/kinda know, that if I do, it will ERASE WM6 correct? And go back to WM5?
Oh and yes xtreme, I have searched this on the search bar. And yes, I know you replied back, but you were referring to the Hard SPL. I am having problems w/ installing .CAB files.
neojammer said:
Ok, I tried what you mentioned ultra, and I got this message upon connecting the 8525 to the PC. (BTW, this is the SAME message that appeared when I was attempting to install HardSPL-V7),
HTC USB Sync
has not passed Windows Logo testing to verify its compatability with
Windows XP.
Continuing your installation of this software may impair or disabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
I pressed "Continue" and it installed HTC USB Sync. But then I got the a message telling me "Activesync 4.5 or greater needs to be installed" (even though it IS installed). I ran through the setup again, and it would only let me "repair" or "uninstall". I pressed "repair". Afterwards it asked me to "restart". I did. Then upon loading back up, I connected the 8525 to the PC again, and I got the SAME message again (the one about it not passing Windows Logo). This time I pressed "STOP" and then I got the message about HTC USB Sync not being installed in the computer.
I have been fed up with the problems the 8525 has been giving me. My Clie UX was so much easier to manage. Quick question, I am REALLY leaning on doing a HARD RESET, but I think/kinda know, that if I do, it will ERASE WM6 correct? And go back to WM5?
Oh and yes xtreme, I have searched this on the search bar. And yes, I know you replied back, but you were referring to the Hard SPL. I am having problems w/ installing .CAB files.
Click to expand...
Click to collapse
dont hit stop dude, u're suppose to hit continue. hitting stop prevents the drivers from being installed and then the RUU wont run
Well I did press "Continue" the first time and I did not see any improvements. I just saw that it installed "HTC USB Sync".
I AM able to successfully install Activesync, I just can't get .CAB files to install.
Could it be because I pressed "STOP" whenever I tried using HardSPL? Should I try and run HardSPL AGAIN and this time pressing "Continue"?
Oh, and are you sure I'm supposed to press "Continue"? After all, I do get that error about Microsoft strongly recommends that you stop this installation. It sounds fishy pressing "Continue".
I just installed Activesync ALLLL over again, but this time in the D:/ drive... still the same .CAB problem.
Oh, and I no longer have the problem where Activesync would uninstall by itself. I noticed it fixed itself yesterday.
BUT I'm still having problems installing .CAB files.
1). hard reset will reset it back to factory its true BUT, and like j-lo's this is a big but, it will re install the last os on the phone (wm6) NOT the stock rom...
2). are you installing the .cab files from the computer or copying them to the memory card and installing from there?
If you install the .cab from the memory card it seems to work fairly well (at least from my experience). if its in a .exe format then it runs from the computer and requires activesync. if you have the .cab file then my suggestion is try to run it from the memory card.. Cheers..
Try installing the SDK certificates and see if that helps
Finally Works!!!!! Hard Reset!
OK, so I've been up for about 3hrs straight trying to figure this out. Reinstalled/uninstalled activesync... tried installing HardSPL again (twice)... didn't work. So I was like, you know what...f* it. I'm going to do a Hard Reset. I'm just gonna try it.
IT WORKED!!!! AND IT STILL STAYED IN WM6!!!! And I think it's still unlocked (although I've read from threads that a HR will disable the unlocked feature).
I AM GLAAAAD THAT I CAN INSTALL FILES NOW!!!! YAY!! (hehe). THANKS TO THOSE WHO TRIED TO HELP!!! SERIOUSLY. It feels really bad when no one tries to help you, even though you don't have a CLUE as to what to do.
** I solemnly swear I will no longer try to use HardSPL or try flashing to a different ROM*. I will use the ROM that came with the phone, and be glad everything is WORKING **
*= at least for until a couple of more months
AND for those who are having this problem (and it's a lot of ppl, based from search results), try a HARD RESET. It helped me anyways.
"and like j-lo's this is a big but"
Glad it worked but I wouldnt allow one bad experiance to turn you off flashing... If I were you I'd still flash hard spl ( in case you find something that you really like). It DOES make it easier to fix "bricks". But just to satisfy your curiosity, go to bootloader and see if it says that you have 2.10 or 2.30 SPL. Also if you want to try flashing, try the sd card method. Its a heap safer (from my experience) than flashing by activesync. Check the wiki for how to do it.
PS. you dot need to reformat the sd card. if you have all the stuff you want on it then just copy the .nbh to the root of the sd card and rename to "hermimg.nbh", it will load as soon as the hermes is put into bootloader and you wont have to re-install anything. Works every time for me and I've done it about 30 or 40 times...Cheers......
ultramag69 said:
1). hard reset will reset it back to factory its true BUT, and like j-lo's this is a big but, it will re install the last os on the phone (wm6) NOT the stock rom...
2). are you installing the .cab files from the computer or copying them to the memory card and installing from there?
If you install the .cab from the memory card it seems to work fairly well (at least from my experience). if its in a .exe format then it runs from the computer and requires activesync. if you have the .cab file then my suggestion is try to run it from the memory card.. Cheers..
Click to expand...
Click to collapse
i think his problem is that he can't install .cab files period. he's having the same problem as me. my first phone had that prob, i updated .net 2.0 and it was fine. got my second phone here, update .net to 3.5, but still can't transfer/execute ANY cab files to my phone. the pc just doesn't recognize the phone period. i can't copy/paste, can't push anything through onto my phone. it's crazy. so what else can we do? i'd like to think i'm pretty tech savvy, but this isn't cool LOL
Hello,
now I cannot execute a 'not signed' .exe from my diamond, because of the 'not signed' error message.
I tried to see the first steps of the android port on the diamond touch. I had to remove the battery to stop the application. Since, it's not possible for me to execute any non-signed application (total commander, putty, ...).
Did you find a clean solution? I prefer not to go through the steps of reinstalling a new firmware (windows isn't accessible on my computer & I have a rather old backup of my diamond's files).
I allready have a hardspl, because my orginal ROM is from SFR (french operator)... and I prefer the original HTC version which is more beautiful & more uptodate.
geh said:
Hello,
now I cannot execute a 'not signed' .exe from my diamond, because of the 'not signed' error message.
I tried to see the first steps of the android port on the diamond touch. I had to remove the battery to stop the application. Since, it's not possible for me to execute any non-signed application (total commander, putty, ...).
Did you find a clean solution? I prefer not to go through the steps of reinstalling a new firmware (windows isn't accessible on my computer & I have a rather old backup of my diamond's files).
I allready have a hardspl, because my orginal ROM is from SFR (french operator)... and I prefer the original HTC version which is more beautiful & more uptodate.
Click to expand...
Click to collapse
I've got the same problem. please help
sascha.egerer said:
I've got the same problem. please help
Click to expand...
Click to collapse
I finally done a hard reset, and now all is OK.
No other solution found.
geh said:
I finally done a hard reset, and now all is OK.
No other solution found.
Click to expand...
Click to collapse
Trying the same thing for my Diamond after trying out Android on it.
Same problem here. Running android 1.0 got me into this trouble.
(Running android 0.8 multiple times did not cause this problem.)
Did anybody find a better solution than hard reset?
Re
Same problem here cant run .cab files after trying run Android 0.8.
Damn , dunno why i tried to run Android 0.8
Hi!
Had someone tried to run Symantec pcAnywhere mobile on Touch HD?
I've got the following Problem:
Installed by .cab-File
Started, works great on this huge Display!
...but: After rebooting my PPC the following happens:
If I try to start now, it dosen't work anymore.
It seems, some components are missing.
What can I do?
Thanks,
Nomel
Hi Nomel, i have the save issue's. after several soft and hardreset and different installation of applications, i also find the error in symantec pc anywhere mobile.
i don't know how. but after a hardreset and a clean system i install only pca mobile. works first fine. but if you softreset your hd you cannot anymore run or reinstall it !!!!
yesterday i tested with making a backup before , softreset and the same !!!!!!!!!!!!!!!!!!!
at moment i have no solution.
Symantec pcAnywhere mobile install on HTC Touch HD
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
I have been using PCAnywhere for months with no problems after many soft resets.
mpconti said:
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
Click to expand...
Click to collapse
I'm having the same problem. I'm using NFSFAN's custom ROM on my HTC Touch. Only on his later 2 versions does this problem occur. I believe he got the ROM build from the Omnia....
So, the problem could be some kind of conflict between the program and these newest builds of WM 6.1.
Damn....
I have the same problem with rom 1.56 ITA . with the previous version everything was ok even after softreset. with the new one I find the described error during install
htc touchpro2 pcanywhere solution
i have installed pcanywhere 12.5 on my htc touchpro 2 and it worked great until i soft reset it (powered down and up again) and i get the same problem. wont run and wont reinstall. so i threw pcanywhere 11.5 in the ol' cd rom and just installed the moble onto my phone and it works just fine. i still have 12.5 installed on both my machines and the mobile 11.5 connects to my xp box great. not sure about vista or win7. try that guys. hope it works!
This worked for my Touch Pro 2
I found this fix somewhere (don't remember where).
But if you rename
MFC80***.DLL to MFC80***.dll
there are a few of these files in the Windows directory.
I used resco explorer and hit rename and it automatically made the .DLL to lowerecase .dll and voila, pcAnywhere mobile worked.
You may have to do a fresh, new install and then do the rename before a reboot.
I hope this works for you.
(windows directory of the phone)
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
kbriaz said:
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
Click to expand...
Click to collapse
This is actually the HD forums. You'd be better asking this in HD2 forums
Hello all, I have a T-Mobile HD2 with WP7 on it. I tried using the Mango update from elfinazz but I get the following error when running DWI.EXE.
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
HD2 has been running WP7 very stable for months, with Live services activated. When I originally put WP7 on it I installed MAGLDR 1.12. Today when I got the above error, I flashed it to 1.13 with no problems, so I think there might be a communications problem with DWI.EXE. I have also tried it on a different computer with the same results. I even tried downloading CustomRUU.exe and ran that from the folder.
When I connect my HD2 to USB, the message in the white area changes from serial to USB, so the phone is seeing the USB connection, but the computer doesn't. Also, if I run DWI.EXE and don't connect the HD2 I get the exact same error.
I am running it in administrator mode. Allow USB connections in Mobile Device center was checked at first, then I unchecked it. I can't find specific steps for upgrading from the original WP7 release to Mango, so I assume I am missing a step. I have been trying to get this working for a couple of hours now with no luck, any help would be appreciated.
Thanks!
Solution ..
Hi, I had the same problem, don't worry its so easy to solve it
Reinstall or install depends the case the Windows Mobile Device Center, the same one you used with WM6.5 and the problem will be solved, why ? because this problem its a driver problem, if you are using windows 7 you need the drivers of your mobile, and this drivers will be given in Windows Mobile Device Center once you installed connect the mobile, will start to recognize the phone and drivers and then try to flash again ....
I had same problem and solved by doing this
Look at me desperate LOL
http://forum.xda-developers.com/showthread.php?t=1131533
and answer from jorge_jomi almost at the end ...
Hey
Ill give that a try thanks jorge
im having trouble loading XAP files to my HD2, i have the tom's installer and they load onto the phone that appears on the computer but when you go and click on each item to install they all have a different reason for not loading some talk about dll files and the camera give a longer error message. i would like to get this all fixed before i try and load the android onto the phone thanks for your help. i used the Tech1 Easy DWI Installer to get wp7 on my phone.
I dont know what camera is in the WP7 file that i loaded but it seams to work fine there is a list of XAP on the HTC HD2 site that i have tried with no luck.
Thanks for any help
anyone able to help
I can't install .xap too, but for me the Tom Xap installer gives mee an error saying to check the Phone is unlocked & Zune is launched.
& i checked on the phone, app isn't here.
When i installed the Rom the 1st time, Zune made 2updates itself, maybe it's the cause. (But i updated with DEV_UNLOCK.cab)
So i wonder if i've to reflash? due to encrypting of the SD card, there wont be any issue?
you must do hard reset after upgrade to Mango RTM.... go to Settings, About, Reset
I was getting the check phone to make sure it was unlocked error also i think what took care of that problem was in the tom's i checked the emulator instead of device.
[solved] XAP can't sideload
It missed the hardreset after the first installation as well. But it's essencial and everything works afterwards perfectly!!! Nice
Hi
I have done the reset after installation, but still cant load xap files.
Tried with Toms but it gives back an error "phone not connected ....."
When I look in the meny on the phoneAdvanced config is there but when I try to execute
I closes after 5sec.
Anyone Please.
Sorry for my bad English
/segepe