GPRS Automatic Disconnect! - Dash 3G, Snap General

Hello, I have HTC Snap WM 6.5. Do you have experience with GPRS 1 Minute autodisconnect.cab? Works without problem? Thanks!
Yes, works I have install this cab.

Where is the Automatic Disconnet Cab???

You can just do the following regedits to achieve the same:
Go to: HKEY_LOCAL_MACHINE\Comm\ConnMgr\Planner\Settings\
Change the entry "SuspendResume" Value from "~GRPS!" to "GPRS_bye_if_device_off"
Make sure the value of "CacheTime" is set to 60
This only works when there is no data being used, so if you have something running in the background like an IMAP IDLE client for browser it will probably now allow the timer to reach zero and shut off.
(Disregard Quotes, they are for visual exclusion not part of the actual entry.)

thx man
its work on omnia pro
useful trick

cswroe said:
You can just do the following regedits to achieve the same:
Go to: HKEY_LOCAL_MACHINE\Comm\ConnMgr\Planner\Settings\
Change the entry "SuspendResume" Value from "~GRPS!" to "GPRS_bye_if_device_off"
Make sure the value of "CacheTime" is set to 60
This only works when there is no data being used, so if you have something running in the background like an IMAP IDLE client for browser it will probably now allow the timer to reach zero and shut off.
(Disregard Quotes, they are for visual exclusion not part of the actual entry.)
Click to expand...
Click to collapse
Is this the registry to let the phone disconnect the GPRS if not in use?

Related

GPRS web browsing problem -limited access and no full google

I'm on Tmob USA's GPRS which works fine, except certain pages (like the html full version of google) or blogger.com just will not load over GPRS. I've tried some registry tweaks to make my browser look like another browser and some other tweaks that were recomended and I still have no luck.
I believe another JasJar user was able to set the preferences at Google to always load pages as HTML, but over GPRS I can't save my preferences on that page to do so. Over wifi I'm able to connect to any page just fine (and I've set my google preferences to HTML from the device on wifi), so I believe somewhere the device is changing the settings depending upon my connection method.
This is one of my last JasJar bugs that's driving me nuts. Please help if you can!
Really, no one else is having this problem? crap....
After my last hard reset google keeps diverting to www.google.co.uk/pda. I think that's because I haven't used Tweaks2k2 to change a few bits, as I normally do, but you can still view 'proper' google, by going into preferences (on the website) and changing the default to 'HTML'
sub69 said:
After my last hard reset google keeps diverting to www.google.co.uk/pda. I think that's because I haven't used Tweaks2k2 to change a few bits, as I normally do, but you can still view 'proper' google, by going into preferences (on the website) and changing the default to 'HTML'
Click to expand...
Click to collapse
See, I tried that with no luck. When I navigate to the preferences page over GPRS it fails to save my preferences, literally every time it times out. When I use Wifi I can navigate to the preferences page and save the preference for full HTML, but it still doesn't load when using GPRS. It's pretty clear that it's using a different set of connection settings when the connection is made via GPRS. What settings do you use with Tweaks2k2? Maybe that will work for me...
As I see it, there are three possible reasons:
1) The connection is not a full internet GPRS connection and maybe instead going to a "walled garden", or using WAP
Go to settings, connections, connections, Manage existing connections and duplicate the settings from your Universal onto another device capable of taking your SIM card. Try that sim card in another device with the same connection settings. I expect you'll get the same results. If so, post the settings here
2) Tweaks has done something undesired. Can you list a few websites that are failing? Personally, I'm reluctant to install ANY software until I'm 100% convinced I need it. This applies also to my desktop and trippley so to my server
3) Blame the user :lol:
I reckon it's 1) :idea:
I just set it to recognise pIE as IE6.0
I'm not convinced that that's going to fix the problem you have though, because I'm sure that I've had that problem on other PPC phones which I never used Tweaks2k2 on, and there was some other way to fix it.
I'll have a play around and see what I can come up with...
xiasma said:
As I see it, there are three possible reasons:
1) The connection is not a full internet GPRS connection and maybe instead going to a "walled garden", or using WAP
Go to settings, connections, connections, Manage existing connections and duplicate the settings from your Universal onto another device capable of taking your SIM card. Try that sim card in another device with the same connection settings. I expect you'll get the same results. If so, post the settings here
2) Tweaks has done something undesired. Can you list a few websites that are failing? Personally, I'm reluctant to install ANY software until I'm 100% convinced I need it. This applies also to my desktop and trippley so to my server
3) Blame the user :lol:
I reckon it's 1) :idea:
Click to expand...
Click to collapse
Some interesting ideas there. Some of the sites that are failing include:
www.google.com - I can't access the full version and the PDA version hangs constantly during loading and loads results very slow, no images shown when image search is done.
www.blogger.com - It tries to load www.blogger.com/start which again hangs terribly and loads a version of the page with no images.
Various internet shortcuts I imported over from my bookmarks I used on my Dell Axim X30 (PPC2003SE). I'll have to pull a list later if I'm still having this problem.
I don't have another PPC Phone device so I can't try the settings swap but it does sound very likely. I am currently using the cab file from imate for tmobile USA settings (which does create a connection called "tzones" which kinda worries me), it uses the internet2.voicestream.com access poin. I had also manually configured the settings previously using these settings and still had the same problem (pulled from a hofo post by Mashie):
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = wap.voicestream.com or internet2.voicestream.com (whichever you like)
Next
Next
Finish
leave username, password, domain, etc... all blank
Click to expand...
Click to collapse
But maybe I need to try some different settings... I'll try playing with the settings I have, creating new settings, and hounding some other Tmob USA GPRS user's settings (hopefully someone using another jasjar).
Re: #2, I haven't actually used Tweaks, I used Resco registry editor to try and make the browser appear to be a full PC browser. I tried a ton of registry settings suggested by some more Hofo super-users, but nothing worked. I eventually got really creative and desperate with some registry edits and finally hard reset the device, tried the suggested reg edits again without success, then hard reset again.
Re: #3 - lol. I seem to be the only one with this problem, so I'm not rulling it out... I was a bit worried someone was going to suggest that the PEBKAC (problem exists between keyboard and chair).
www.hotmail.com and www.handango.com are sites I have experienced cannot be accessed in their full PC version. The PIE on the JJ takes us to the mobile sites.
Likewise a strange thing happens when I try to log into the "PocketPCDubai Forums". PIE starts to download the site page. I can see the progress indicator gradually move up. When about 180 Kb has been downloaded the progress indicator disappears meaning that the page has fully been downloaded. Nevertheless the page is blank and with nothing on it.
I also have tried to modify the registry to make the PIE appear as a full browser but nothing seems to work.
Regards
www.hotmail.com and www.handango.com are sites I have experienced cannot be accessed in their full PC version. The PIE on the JJ takes us to the mobile sites.
Likewise a strange thing happens when I try to log into the "PocketPCDubai Forums". PIE starts to download the site page. I can see the progress indicator gradually move up. When about 180 Kb has been downloaded the progress indicator disappears meaning that the page has fully been downloaded. Nevertheless the page is blank and with nothing on it.
I also have tried to modify the registry to make the PIE appear as a full browser but nothing seems to work.
Regards
"www.hotmail.com" and "www.handango.com" are sites I have experienced cannot be accessed in their full PC version. The PIE on the JJ takes us to the mobile sites.
Likewise a strange thing happens when I try to log into the "PocketPCDubai Forums". PIE starts to download the site page. I can see the progress indicator gradually move up. When about 180 Kb has been downloaded the progress indicator disappears meaning that the page has fully been downloaded. Nevertheless the page is blank and with nothing on it.
I also have tried to modify the registry to make the PIE appear as a full browser but nothing seems to work.
Regards
Has anyone had this issue and resolved it via ROM upgrade? I'd be ready to upgrade the ROM right away if I knew it fixed this issue. If not, I'd rather not waste a few hours setting up, reinstalling, and configuring everything.
Does Mozilla Minimo work on the JasJar?
If it does - I believe that might offer a more feature full alternative to the bundled pocket PC InternetExplorer Galt.
Hope this helps
Finally remembered the address that I used to use for Google when I had this problem on my Jam...
http://www.google.com/webhp
That wont redirect you to the /pda page. There are probably similar pages for other websites, but this is the one I used most!
This registry hack will make Pocket Internet Explorer identify itself as IE 5.5 on Windows 2000. However it will prevent web sites that provide Pocket PC specific content to be able to know you're actually using a Pocket PC
Change Pocket IE to IE Version 5.5 (For Secured Sites)
1) Go to the HKLM\SOFTWARE\Microsoft\Windows\?CurrentVersion\Internet Settings\User Agent\ key. 2) Set the default value to "Mozilla/4.0" (Default is "Mozilla/2.0"). 3) Set the "Version" value to "MSIE 5.5" (Default is "MSIE 3.02"). 4) Set the "Platform" value to "Windows NT 5.0" (Default is "Windows CE").
This will only work on some secure sites that check version number rather than perform a check for support of secured transactions.
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Carnivor said:
Change Pocket IE to IE Version 5.5 (For Secured Sites)
1) Go to the HKLM\SOFTWARE\Microsoft\Windows\?CurrentVersion\Internet Settings\User Agent\ key. 2) Set the default value to "Mozilla/4.0" (Default is "Mozilla/2.0"). 3) Set the "Version" value to "MSIE 5.5" (Default is "MSIE 3.02"). 4) Set the "Platform" value to "Windows NT 5.0" (Default is "Windows CE").
This will only work on some secure sites that check version number rather than perform a check for support of secured transactions.
Click to expand...
Click to collapse
Tried that, didn't work for me.
sub69 said:
Finally remembered the address that I used to use for Google when I had this problem on my Jam...
http://www.google.com/webhp
That wont redirect you to the /pda page. There are probably similar pages for other websites, but this is the one I used most!
Click to expand...
Click to collapse
Tried that, although it loaded the main page (I think I had it cached from wifi browsing) it didn't let me search from there.
I finally upgraded my ROM to the latest 1.13.53 version and still couldn't resolve this with alternate URLs or registry edits. Any ideas, anyone? I'm using the T-mob USA cab settings from imate...

GPRS Connecting at startup!

Have searched for this and find nothing:
Whenever I restart my TyTn, GPRS connects automatically. I have not configured my email to check for mails at specific intervals. Please help me with this. Thanks!
I think your connection is configured as "always on". You can change it in the registry....
danielherrero said:
I think your connection is configured as "always on". You can change it in the registry....
Click to expand...
Click to collapse
Indeed, or if you're not confident about changing registry use something like Tweaks2k2 to make the change for you along with lots of other little tricks.
http://www.tweaks2k2.com/portal/staticpages/index.php?page=20050224182009983
requires .net framework also downloadable on same page
Mike
You could try a less drastic approach:
Check:
Settings, Connection-tab, Connections, Advance-tab.
(hope this is correct, I don't have an english rom-version)
There you should be able to select which connection is automatically used. I have this on T-Mobile default connection since I have an unlimited dataplan and use direct-push.
When using the phone as modem, I have to switch this "off"/different setting eg. work connection to avoid conflicts.
Hope this helps
drbrains said:
You could try a less drastic approach:
Check:
Settings, Connection-tab, Connections, Advance-tab.
(hope this is correct, I don't have an english rom-version)
There you should be able to select which connection is automatically used. I have this on T-Mobile default connection since I have an unlimited dataplan and use direct-push.
When using the phone as modem, I have to switch this "off"/different setting eg. work connection to avoid conflicts.
Hope this helps
Click to expand...
Click to collapse
We like drastic, drastic is sooooo gooood!!
Seriously though the originator does not say he does not want to use GPRS only that he does not want it starting automatically. So the connection type maybe correct only it needs its bottom smacked for running off without daddy. We have ways in the registry to control such dis-respectful behaviour and baby Hermes must be punished or else get sent to bed with no active sync with Mummy.
Mike
Thanks for your help. I am quite comfortable with editing the registry. What specifically in the registry should I edit. Thanks!
EDIT: I already FOUND it! Thanks for the help everyone!!!

WinMo 6.5 auto screenlock without pin prompt?

How is it possible to enable auto screenlock after like 30 sec idle or everytime the display is turned off without having prompted the pin?
Hi zooster,
try csdevctrl, it supports what you want. I'm using it on my TP2.
http://forum.xda-developers.com/showpost.php?p=2130633&postcount=1
cheers, M
oltp said:
Hi zooster,
try csdevctrl, it supports what you want. I'm using it on my TP2.
http://forum.xda-developers.com/showpost.php?p=2130633&postcount=1
cheers, M
Click to expand...
Click to collapse
Great program, thank you.
zooster said:
How is it possible to enable auto screenlock after like 30 sec idle or everytime the display is turned off without having prompted the pin?
Click to expand...
Click to collapse
You only have to disable the locking in the settings!?!
you can set the autolock through the registry without having to input a PIN. That way it only has the slide to unlock screen. I can't remember the registry key off hand but I remember it being pretty obvious. Search the registry for "autolock". It is a dword either 0 or 1 (off or on)
HKEY_CURRENT_USER\ControlPanel\BackLight, AutoDeviceLockEnable 0 change to 1
eeeuuhm at options just un vink ask pin
hi,
your registry entry is working fine. But it's asking me always for the PIN.
I cannot uncheck the "Prompt if phone is unused for"... it's grey.
Anybody an idea why?
I read about that, that it could be because I am synchonizing my contacts/email etc. with a exchange server, but I am not sure.
Thanks for any tipps.
Fippo
fippo79 said:
hi,
your registry entry is working fine. But it's asking me always for the PIN.
I cannot uncheck the "Prompt if phone is unused for"... it's grey.
Anybody an idea why?
I read about that, that it could be because I am synchonizing my contacts/email etc. with a exchange server, but I am not sure.
Thanks for any tipps.
Fippo
Click to expand...
Click to collapse
You have to "[email protected]" the policy from the exchange server to enable the option to uncheck ask for a pincode...
take the following steps:
Install regedit ( PHM Regedit : http://www.phm.lu/products/PocketPC/RegEdit/ )
Change the "\hklm\security\policies\policies\00001023" to 1 ( as described in : http://blogs.alittlestrange.com/blo...assword-policy-on-windows-mobile-6-0-6-1.aspx )
Remove the password checkbox ( as described in : http://blogs.alittlestrange.com/blo...assword-policy-on-windows-mobile-6-0-6-1.aspx )
Good luck.... But beware.... This might conflict with the security policy as descibed with you company or organisation...
speedyb said:
You have to "[email protected]" the policy from the exchange server to enable the option to uncheck ask for a pincode...
take the following steps:
Install regedit ( PHM Regedit : http://www.phm.lu/products/PocketPC/RegEdit/ )
Change the "\hklm\security\policies\policies\00001023" to 1 ( as described in : http://blogs.alittlestrange.com/blo...assword-policy-on-windows-mobile-6-0-6-1.aspx )
Remove the password checkbox ( as described in : http://blogs.alittlestrange.com/blo...assword-policy-on-windows-mobile-6-0-6-1.aspx )
Good luck.... But beware.... This might conflict with the security policy as descibed with you company or organisation...
Click to expand...
Click to collapse
Unfortunately, your posted links do not work! - Do you have other sources how to [email protected] the exchange server policy?
gordonshamway said:
Unfortunately, your posted links do not work! - Do you have other sources how to [email protected] the exchange server policy?
Click to expand...
Click to collapse
The links might not work, but the text says it all...
You could also look at the following post: http://forum.xda-developers.com/showpost.php?p=1810102&postcount=2
or at the following blog http://www.etenblog.com/2008/01/21/disable-exchange-security-policy-for-windows-mobile-devices/

Treo Pro 850 Interval settings

I'd like to know where to modify the interval settings to under 5-minutes. Currently, my e-mail (IMAP4) is downloaded every 5-minutes, I'd like to change to 1-minutes, but least amount of time allowed is 5.
Was hoping there was a registry settings that can be modified?
Thanks,
--tj

[Q] Changing the default network connection

I want to automatically select the default network to which the device connects
(the first combo in Settings->WirelessControls->menu->Connections->Advanced->SelectNetworks -
See attached image)
My problem is as follows -
When I set up the connection to the operator -
it sets the default network to be <<3G Portal>>
I want to automatically change it to <<Internet 3G>>
(Or in the worst case -
Automatically delete the <<3G Portal>> -
making the <<Internet 3G>> the only available option -
which will force it to be default)
Does anyone know how to do this ?
(Even if some Cpp/C# code is needed - does anyone know the API ?)
Thanks
Not a lot of sense there
Looking at the screen print
The phone is set up to access the web FIRST via the 3G portal (every phone needs a portal to get online).
The second option looks to me to be a WIFI connection. Wifi always take priority over gprs/3g/hspa
so unless you can make a bit more clear what your looking for......................
http://www.filesaveas.com/gprs.html
Of course, if you mean a different web access point get the APN settings and manualy add then from the settings menu - wireless and networks access point names - press the menu button - add apn
As I understand your Q, you wanna auto set the default network without having to manually change it everytime you hard reset / change roms?
Here's what I do for such things.
Get ceregistry editor, connect to your phone, export the registry to file, then, on the phone, change the default access point to the one you would rather it was, (possibly reboot phone here to be sure the registry has changed the default apn,) back into ceregistry editor, compare current registry to the snapshot, figure out which key changed, and to what value, then provision that reg key (via a cab, or provxml,) whenever you hard reset, after the network has been set up. (I have a cab with dozens of tweaks in it,you can just keep adding to it)
johnerz said:
Not a lot of sense there
Looking at the screen print
The phone is set up to access the web FIRST via the 3G portal (every phone needs a portal to get online).
The second option looks to me to be a WIFI connection. Wifi always take priority over gprs/3g/hspa
so unless you can make a bit more clear what your looking for......................
http://www.filesaveas.com/gprs.html
Of course, if you mean a different web access point get the APN settings and manualy add then from the settings menu - wireless and networks access point names - press the menu button - add apn
Click to expand...
Click to collapse
Thanks for the reply.
Both connections are over the Cellular network.
The first one (3G Portal) is set up by the operator to go via some proxies and stuff, which block certain services/sites as they are not stored on this proxy.
The Second one is "unfiltered" internet connection over the Cellular network.
Whenever the network is detected and set up, the settings are automaticelly set to go via the "proxied" connection.
I want to change it to work over the unfiltered connection.
I would like to know the registry keys or any other place this information is kept, so I could automatically change it.
I tried searching the registry for these values but could not get to a definite conclusion about where exactly the "default connection" is stored, or if it is stored in the registry altogether.
(If it is stored in the registry - I do NOT want a complete registry import/export - just the relevant keys)
Many thanks in advance.
Yes it is stored in the reg, but it stores an ID for each connection which is different for everyone, hence the method I suggested which would reveal both the key and the ID, I wasn't suggesting you import a whole registry, simply make a cab of just the one key. It would take about 10 mins to do, but I'm not running winmo so can't lookup the key for you.
Som30ne said:
Thanks for the reply.
Both connections are over the Cellular network.
The first one (3G Portal) is set up by the operator to go via some proxies and stuff, which block certain services/sites as they are not stored on this proxy.
The Second one is "unfiltered" internet connection over the Cellular network.
Whenever the network is detected and set up, the settings are automaticelly set to go via the "proxied" connection.
I want to change it to work over the unfiltered connection.
I would like to know the registry keys or any other place this information is kept, so I could automatically change it.
I tried searching the registry for these values but could not get to a definite conclusion about where exactly the "default connection" is stored, or if it is stored in the registry altogether.
(If it is stored in the registry - I do NOT want a complete registry import/export - just the relevant keys)
Many thanks in advance.
Click to expand...
Click to collapse
Try using Data Controller by Red Frogfish. With this app, you can turn on and off all of your different connections indvidually.
Since, I have T-Mobile, I have the following connections:
T-Mobile Data
T-Mobile MMS
T-Mobile Internet
And, Data Controller lets turn each on or off as needed/wanted.
Rob
samsamuel said:
Yes it is stored in the reg, but it stores an ID for each connection which is different for everyone, hence the method I suggested which would reveal both the key and the ID, I wasn't suggesting you import a whole registry, simply make a cab of just the one key. It would take about 10 mins to do, but I'm not running winmo so can't lookup the key for you.
Click to expand...
Click to collapse
Ok, thanks.
I will try this method.

Categories

Resources