Hi.
I have Orange SPV M1000.
I have tried to get it bonded to a Logitech diNovo keyboard on my PC.
By trying to add it to Settings | Connections | Connections | Advanced | Select Networks | New (internet) | New | (a name : abc, a modem: bluetooth) Next | New... | My_PCs_Name | Next | Name: my_pcs_name |Finish
Then the pops 2 requesters up
1.) This bluetooth device supports Serial port profile, would you like to create a Bluetooth serial port for it? (My answer: both yes or no)
2.) This bluetooth device supports headset profile, would you like to set it as your bluetooth headset? (My answer : No)
I have tried this when Connections | Bluetooth | was set to both "Discoverable" and "On"
but apparantly to no avail.
What I would have liked to work was:
1.) bluetooth activesync
2.) browsing via bluetooth from my PC's connections
3.) filetransfer via bluetooth (might go under activesync)
But I seem unable to get it to work.
Does anyonw have some ideas for this.
Thank you in advance.
Best regards: Jacob Eskildsen / eskildsen
there is no one around here seems to know this
i have been trying to do the exact thing for a few days now, had no joy at all.
there is not even one person using this kind of connection? or just do bother to tell.
I can make PC side working. Internet Connection Sharing bit, and I can even PING my PC from XDAII.
can somebody here help. if you really did this yourself
activesync and internet through bt
I just got activesync and internet working through bt . But I'm not sure how I did it . I have no extra bt software on my phone. I have a usb BT dongle (MSI) and I paired both of the devices. In all the settings I made sure internet sharing was allowed, on the BT network. In activesync in options - rules Pass through is ticked with connection to internet.
On the XDA started activesync through bt and my computer accepted it, and started to sync, the internet then started to work. i think active sync needs to be on for internet to work.
I don't really know the precise instructions, wish I did because i've just lost the connection again, and it will most probably take me another hour to work it out. think this time I better write it down!!!
If you could sync via Bluetooth, then browsing and file transfer via Bluetooth are possible. I've been able to do all of them. Just make sure you choose the ActiveSync profile when you pair your Pocket PC with the Bluetooth device on your desktop PC. If the ActiveSync profile is not available, then choose the Serial Port profile. But afterwards, you would have to go to ActiveSync Connection Settings and manually select the serial port you created.
thanks for advice
I've been having problems, like many people. And I've did what they did. Downloaded bt tools and its working excellent : ). I'm writing this on my xda2, downstairs from my computer. I'm well chuffed. Thanks for your quick reply, it seems your using bt tools too.
Am I ever going to get the hang of this!! BT Activesync ???
I'm able to get Activesync and thus internet through BT, but if I stop bluetooth on my XDA2, and then turn it back on and try to sync, I get an error message, stating Port not available.
What going on? how do I make this port avaliable. I thought I could turn BT on and off without problems, is this not the case. Is my computer configured wrong?
Help!!
Replying to myself!!
OK my problem has been solved, I just turn the BT off and on on my computer.
But what I really want, is to be able to not have to change anysetting on my computer. I would like to be able to enter my house and connect to BT, and then turn it off if I want, and then back on, and then off, on ,off, on..... You get the gist, without have to go upstair to my computer each time.
:twisted:
Any ideas :?
Hi,
Take a look at the guides for bluetooth ActiveSync'ing....
HERE
Thanks
Thank you for that Darius, i'd seen that guide before but forgot where it was. It has helped me to get activesync going anyway. I have actually hard rebooted my XDA2 because my Jabra BT200 stopped working, actually the phone software also buggered up. would ring people but they coud not hear me. Think it may have been BT Tools :roll: Which is a shame, I liked the desktop icons it gave.
At this moment in time I am in the process of restoring my data to my phone over BT, Just hope the BT200, will still work, because before it worked excellent a 100% of the time.
Ive read quite a few threads talking about changing the BT stack, for a more reliable one, but I'm worried about mucking the XDA2 up more.
My next worry is that I've ordered a BT GPS reciever, and I'm gonna try to get Tom Tom working with it, I'm sure I'm gonna have to read quite a few more posts to sort that out. I thought I was good on computers, I think I will have to rethink that altogether.
Hi,
I am wondering if there is a way to use my device as a kind of hand-free for my computer ? The bluetooth services only shows "Dial-up networking", but maybe I have missed the software which allows to do this.
Thank you !
Hi,
I've recently found my Qstarz BT-880 bluetooth GPS receiver and would like to use it with my Vario 2. I have managed to achieve this in the past but for some reason cant get the phone to stay paired with the device.
If I setup a partnership, the GPS receiver connects as soon as I hit ok and then about 10 seconds later it disconnects; I cant then get it to connect again short of deleting the partnership and starting again.
I also cant remember how you just search for bluetooth devices which you can connect to (other than creating a partnership), is this possible?
Anyone seen behaviour like this before/have any tips they can offer as I'm at a loss?
Thanks.
Hi to everyone, I'm developing an Android application and I'd like to know if Bluetooth is currently in use = if one device is connected to my phone using a Bluetooth connection.
Thanks!!
If you find an answer to this,please let me know. I've been searching for about a month trying to figure out how to determine what blue tooth devices are connected when my app starts.
I'm looking into this myself. I'll keep you informed.
Hi all,
I'm looking at getting my toddler an Android watch so I can see where she is based on Android Device Manager, but I would want to lock down the interface so that she can't accidentally perform any functions on the UI.
Can anyone help me out with which devices I may want to begin looking at please? Or if anyone's done similar in the past I'd be keen to hear successes and pitfalls etc.
thanks in advance!
ADM doesn't work that way for android wear. Your watch won't show on the web page with your devices. For a.w., it only makes the paired phone ring.
I don't see android wear as a good solution for you, honestly. Unless you got an urbane 2, it would only work while connected to wifi. Locking the screen can be done, but I'm not aware of an app that will work without a bt connection to the phone. Glympse doesn't work without bt connection, it seems.