when updating a firmware?I usually wipe all the 4 options and end up losing all my apps and SMS and stuff.
So, are all 4 wipe options to be performed?and is it normal that i have to reinstall apps each time CM is updated?
If i am not mistaken you do not have to wipe from CM rom to CM rom as of 4.1.99.
mikesm1234 said:
If i am not mistaken you do not have to wipe from CM rom to CM rom as of 4.1.99.
Click to expand...
Click to collapse
Correct, as long as that's what Cyanogen states in his directions. Occasionally devs will release a ROM that makes very significant changes that do require a wipe.
That being said... OP, all you need to wipe is the system itself. You'd only need to wipe an ext partition prior to flashing a new ROM if you had Apps2SD AND the dev recommends a wipe of system.
Related
I have cyanogen mod 7.1.0 RC 1-vision installed on G2 already. Can somebody explain to me how I get to v 2.3.5? I know it has something to do with nightly builds and xboarder56. Im just a little confused on how and what order to flash things. Do I have to install every Nightly update or will the newest one be fine? And exactly what it xboarder56? Is that a modification of Cyanogensmod?
Thanks Sean.....
just install the newest nightly and youll have 2.3.5
xboarder56 is a guy that made a thread on how to install the stock launcher over the ADWlauncher
but you can alternately download a gingerbread launcher from the market and install it
Wipe, and flash the newest nightly just how you flashed RC1
Sent from my T-mobile G2 using Tapatalk
download the latest nightly, put on your SDcard
1) enter recovery (power button -> reboot -> 'recovery')
2) 'backup and restore' -> backup current ROM
3) wipe cache, advanced -> wipe dalvik cache
4) 'Install zip from SDcard' -> Flash nightly.zip
5) reboot
6) fix permissions (ROM manager -> 'fix permissions'
7) reboot again
xboarder56 is a dev on here. he makes several different mods for CM7. The main one that people use is to put the stock GB launcher on CM7. CM7 by default has ADW launcher, but some prefer the stock one. Xboarder56 isn't the only one that has a stock launcher.zip available.
If you want the stock launcher, check the post in my sig. follow the directions carefully if you intend to re-flash nightlies and want to keep your screen placement.
Do I have to download each nightly build? Or can I skip builds from time to time? Are these beta builds? and if so any idea on a final version?
Thanks... Sean...
slufoot69 said:
Do I have to download each nightly build? Or can I skip builds from time to time? Are these beta builds? and if so any idea on a final version?
Thanks... Sean...
Click to expand...
Click to collapse
You can download and install every nightly. But you dont HAVE to. There is a group that only flashes one every few weeks. Either way you will be fine but if you want to be on the cutting edge of new features i would recommend installing it every day. For our phone specifically they come out between 115 am and 130 am. Like said above, wipe cache wipe dalvik install nightly fix permissions reboot with each nightly
Sent from my HTC Vision using xda premium
Question about the wipe cache and wipe dalvik? I see the option to wipe cache but I dont see the option to wipe dalvik... Sorry but I am just now starting to do differnet things with my phone and alot of this stuff is new to me...
Thanks... Sean...
slufoot69 said:
Question about the wipe cache and wipe dalvik? I see the option to wipe cache but I dont see the option to wipe dalvik... Sorry but I am just now starting to do differnet things with my phone and alot of this stuff is new to me...
Thanks... Sean...
Click to expand...
Click to collapse
Dalvik cache is under advanced. I believe if you're not running Apps2SD you can go without it.
Sent from my HTC Vision using XDA App
funkeee said:
Dalvik cache is under advanced. I believe if you're not running Apps2SD you can go without it.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Apps2SD has nothing to do with the Dalvik cache. Wipe it regardless of whether or not you use Apps2SD (which is unneeded unless ur still on a G1).
Sent from my HTC Vision using XDA App
slufoot69 said:
Do I have to download each nightly build? Or can I skip builds from time to time? Are these beta builds? and if so any idea on a final version?
Click to expand...
Click to collapse
They are effectively beta builds. They're not official and not necessarily meant for the general flashing community, as they often contain bugs and untested changes.
slufoot69 said:
Question about the wipe cache and wipe dalvik? I see the option to wipe cache but I dont see the option to wipe dalvik... Sorry but I am just now starting to do differnet things with my phone and alot of this stuff is new to me...
Click to expand...
Click to collapse
like I said above, its under advanced -> wipe dalvik cache.
It has nothing to do with Apps2SD. On a related note, there's no need to run Apps2SD unless you have several gigantic games or something filling up internal memory. You should have more than enough internal memory to keep all apps on the phone itself.
When I wipe my Dalvik Cache, CWM says it cannot find the drive/partition for it. Its never caused a problem for me. I assumed it was due to sdcard partitions, which I used to use for Swap and Apps2SD only. Is it an internal memory partition for performance related caching? If so somethings messed up with my partitions.
Sent from my HTC Vision using XDA App
funkeee said:
When I wipe my Dalvik Cache, CWM says it cannot find the drive/partition for it. Its never caused a problem for me. I assumed it was due to sdcard partitions, which I used to use for Swap and Apps2SD only. Is it an internal memory partition for performance related caching? If so somethings messed up with my partitions.
Click to expand...
Click to collapse
What exactly is it saying? usually it will throw an error about SD-EXT. disregard the error.
For me when I flash new ROMs I use Superwipe+ to do all my wiping in one step. Its quick and effective.
Check it out:
http://forum.xda-developers.com/showthread.php?t=1044992
Each and every morning, I make it my habit to launch Rom Manager (paid version), and select 'Check for updateds'. After it tells me there's an update available, I approve it and select to download (via wifi) gapps. Once it done downloading it then prompts me to choose wipe data & cashed, backup existing rom, or wipe dalvik cashe. I always select wipe Dalvik cashe, then I approve it to power off.
Bamb! easy sneesy .. My nightly rom gets updated!
Sent from my HTC Vision using xda premium
martonikaj said:
download the latest nightly, put on your SDcard
1) enter recovery (power button -> reboot -> 'recovery')
2) 'backup and restore' -> backup current ROM
3) wipe cache, advanced -> wipe dalvik cache
4) 'Install zip from SDcard' -> Flash nightly.zip
5) reboot
6) fix permissions (ROM manager -> 'fix permissions'
7) reboot again
Click to expand...
Click to collapse
I had the same question as the OP. I've been running CM v.7.1 RC1 for a while now and I love it. But I would like to check out the nightlies. Just so I am clear, to go from my current ROM to the latest nightly, I only need to to wipe cache and dalvik cache - and that's it? Somehow I thought the process was more difficult. I thought I'd have to restore my apps with TB and reconfigure all my settings...
And one last quick question. I've never needed to run 'fix permissions.' The sole FC I get is with LauncherPro, but only when I reboot. It doesn't bother me, and it seems like I've read about users who have problems after running the 'fix permissions' in RM. Can anyone elaborate on why that might be?
Thanks so much, guys.
Ditamae said:
I had the same question as the OP. I've been running CM v.7.1 RC1 for a while now and I love it. But I would like to check out the nightlies. Just so I am clear, to go from my current ROM to the latest nightly, I only need to to wipe cache and dalvik cache - and that's it? Somehow I thought the process was more difficult. I thought I'd have to restore my apps with TB and reconfigure all my settings..
Click to expand...
Click to collapse
upgrading from an older version of CM7 to a Nightly you don't have to wipe data. Just cache/dalvik and flash the nightly.
And one last quick question. I've never needed to run 'fix permissions.' The sole FC I get is with LauncherPro, but only when I reboot. It doesn't bother me, and it seems like I've read about users who have problems after running the 'fix permissions' in RM. Can anyone elaborate on why that might be?
Click to expand...
Click to collapse
Fixing permissions is just a good rule of thumb to follow after flashing a new ROM so all your apps are setup properly. I haven't heard of Fix Permissions breaking anything.
I didn't want to bother the team by sending them through the "important question form" webpage.
Neither can I ask them on the development thread on XDA.
I am currently on the slimbean 4.2.2 build 3. Going to build4 the team recommend a full wipe, but then the update of build-5 did not specify such step. I wonder if that means from build-3 to build-5 an easy wipe (wipe cache and dalvik only and flash the latest build-5 rom) is sufficient to make a successful update.
strangetml said:
I didn't want to bother the team by sending them through the "important question form" webpage.
Neither can I ask them on the development thread on XDA.
I am currently on the slimbean 4.2.2 build 3. Going to build4 the team recommend a full wipe, but then the update of build-5 did not specify such step. I wonder if that means from build-3 to build-5 an easy wipe (wipe cache and dalvik only and flash the latest build-5 rom) is sufficient to make a successful update.
Click to expand...
Click to collapse
To be honest this is never advised. Too many artifacts from the prior rom can cause issues. IT is always best to do a full wipe before flashing another rom. Be it update or not.
zelendel said:
To be honest this is never advised. Too many artifacts from the prior rom can cause issues. IT is always best to do a full wipe before flashing another rom. Be it update or not.
Click to expand...
Click to collapse
Most of the time it doesn't matter. An update that specifies a wipe should have a wipe during the process. A build after a build that specifies a wipe should have a wipe during the install if a wipe hasn't yet been applied.
So yes, OP you should wipe from 3-5 as 5 is built off of 4 which requires a wipe.
Sent from my Nexus 4 using Tapatalk 2
This is my first android phone and therefore cm10.1 is the first ROM I've ever had so I've never updated my ROM before. Goo manager sent me a notification saying that Cm10.1 rc2 is now available but in order to download it do I have to wipe my phone to factory default or can I just install it over my old cm10.1 and keep my apps and stuff?? Thanks
michaelsp9 said:
This is my first android phone and therefore cm10.1 is the first ROM I've ever had so I've never updated my ROM before. Goo manager sent me a notification saying that Cm10.1 rc2 is now available but in order to download it do I have to wipe my phone to factory default or can I just install it over my old cm10.1 and keep my apps and stuff?? Thanks
Click to expand...
Click to collapse
The whole point of the CM updater is that you don't have to wipe anything - not data, not cache. Just start the download, click OK to install when it finishes downloading, and it'll flash itself over your previous installation. The same applies to downgrading to an earlier release - no wipe needed.
Yes, you can keep your apps and system settings. No need to backup and restore - they'll be exactly the way they were before you downloaded the update.
However, if you are migrating to an entirely different ROM (i.e. not the official CM), then yes, you probably need to wipe. Going back and forth between different updates of the same ROM doesn't need wiping though.
You can just flash it normally using CWM. It's called Dirty Flashing. DO clear Cache and Dalvik before flashing
sigma392 said:
You can just flash it normally using CWM. It's called Dirty Flashing. DO clear Cache and Dalvik before flashing
Click to expand...
Click to collapse
So what do I do just download the ROM and its gapps again and flash them both? Which one first?
michaelsp9 said:
So what do I do just download the ROM and its gapps again and flash them both? Which one first?
Click to expand...
Click to collapse
Wipe Cache and Dalvik -> Flash ROM -> Flash GApps -> Reboot.
And don't forget custom kernels
sigma392 said:
Wipe Cache and Dalvik -> Flash ROM -> Flash GApps -> Reboot.
And don't forget custom kernels
Click to expand...
Click to collapse
No need to flash Gapps again on CM, unless data is wiped because of the b/u scripts.
The updater script in the ROM also wipes the Dalvik for you.
sigma392 said:
Wipe Cache and Dalvik -> Flash ROM -> Flash GApps -> Reboot.
And don't forget custom kernels
Click to expand...
Click to collapse
Actually you don't have to do any of that except flash the rom and reboot. All the rest is automatic.
I reverted to my backup that I made before flashing. Franco kernel didn't work and I had all the crappy apps I uninstalled from cm10.1 like Apollo and stuff .. What's new is rc2 anyways?
updating cm10.1
Hi all
I am currently using cmw6.0.2.3 and rom cm10.1.20130411-EXPERIMENTAL-p3100-M3 and would like to switch to using cm10.1 nightly. Reason to switch is because pie control in M3 is not working and I saw in some video that it is working in nightly. May i know how to update usingmanual mode please? And also will it deketenall my installed apps and data?
Thanking you all in advance
People,
1) Nandroid Backup.
2) Dirty Flash, if something doesn't work or it starts to fails, restore nandroid, backup everything (needed) with Titanium backup or similar, wipe everything, flash, restore, win.
Hello people. Just wanted to ask how is the right way to wipe when flashing a rom WITHOUT losing the rom (wiping internal)? In CWM i just factory / reset data then thats it then clear cache and dalvik cache. In TWRP do i just need to swipe when the screen says "Most of the time this is the time that you need" when i will flash rom? Thanks for guiding!
anyone?
1. factory reset
2. advance, wipe system
thats all for me, works everytime... just make sure to wipe cache/dalvik after flashing zip files be it roms or gapps or whatever :good:
The default "most of the time" option is a fresh reset of the phone. it wont wipe the ROM itself, but all the data will be lost and you start over. Wiping system will remove everything, a ROM must be flashed after wiping system.
So before i flash a rom i wipe the "most of the time" then advanced format system? right?
zero0422 said:
The default "most of the time" option is a fresh reset of the phone. it wont wipe the ROM itself, but all the data will be lost and you start over. Wiping system will remove everything, a ROM must be flashed after wiping system.
Click to expand...
Click to collapse
So before i flash a rom i wipe the "most of the time" then advanced format system? right?
true that... sorry for misleading initially, format system only applicable if you wanna have clean install of new rom
marshygeek said:
So before i flash a rom i wipe the "most of the time" then advanced format system? right?
Click to expand...
Click to collapse
No need to use format system unless you are installing a fresh ROM. Format system will remove everything from your device (other than sdcard info and all that). So you get a clean slate.
If you just want to flash an update to the same ROM you can either 'dirty flash', which I usually just wipe cahce/dalvik then flash the ROM and reboot, and you save all your user modified things, or you can wipe system and install the ROM. You lose everything that way so make backups.
Usually there isnt much need to factory reset unless you're having an issue with something. What is it you're trying to do?
I wanted to flash a stock based rom. Thank you.
I am sure this is a stupid question, but I've looked and not found a definitive answer so I'll try here.
I have a LG G2 (AT&T) which I have rooted/clockwork/CM11. I did most of it when I had a failed OTA send me into a bootloop. (I had rooted the stock and removed some bloat which it didn't care for). I love CM11 however, there are some issues with the M5 build that I think are solved in the nightlies.
My questions are as follows:
(1) If I start flashing nightlies am I going to loose everything on my phone?
(1a) If so? How do people handle nightly flashes and always having a phone that needs setup?
(1b) If not, how do I flash the CM rom? I assume through recovery like I did before.
(2) Is there an easier way to backup and restore my setup to my phone?
(2a) I have titanium backup, and I have backed up all system and apps. However, I am not sure if restoring that will mess things up after flashing.
So basically, I'm looking to find out how people use the nightly builds and still have a mostly functioning phone on a day to day basis?
Thank you!
Before flashing a nightly for the first time:
You will need to wipe cache, dalvik cache, and data (user data--not internal storage).
Updating to the newest nightly:
You will only need to wipe cache and dalvik before flashing the new nightly. You will not lose your setup or apps. CM has its own OTA app that will automatically install new nightlies via your custom recovery (CWM or TWRP)
Jayriff said:
Before flashing a nightly for the first time:
You will need to wipe cache, dalvik cache, and data (user data--not internal storage).
Updating to the newest nightly:
You will only need to wipe cache and dalvik before flashing the new nightly. You will not lose your setup or apps. CM has its own OTA app that will automatically install new nightlies via your custom recovery (CWM or TWRP)
Click to expand...
Click to collapse
Thanks! I'm new to CM, and the thought of wiping my phone every evening was kind of scary.
bstripp said:
Thanks! I'm new to CM, and the thought of wiping my phone every evening was kind of scary.
Click to expand...
Click to collapse
Yeah once you're on nightlies, it's not a big deal. But after your FIRST flash of the nightlie, also be sure to flash the correct GApps package, which includes apps like the Google Play Store.