Hello,
planning to upgrade my PDA to an other WM6 rom,
I would like to get my passphrase before to still have access to my
profssionnal network.
(key which has not been setup by me) for wifi WPA-PSK TKIP
all I se from wifi cfg interface is an hided password .
is it possible to get the passphrase from registry / cfg file/ plain txt / with tool?
thx
no one has a solution to unclear the password ?
Hi! Wile configurating a new WiFi connection, after choosing WPA and TKIP, then PEAP the pda don't let me to chose the cer i need (Thawte Premium Server CA). What can I do? help me guyz
I had the same problem and added this value to your registry:
\HKLM\Comm\EAP\Extension\25\ValidateServerCert=dword:00000000
now it works for me.
Brubbel
ok..I try..thx man..
I am trying to connect to my university's wireless.
We have two different wireless ssid's that i can connect to with my laptop.
The first, called UBC is unsecured, but when you connect, it takes you to a web page where you enter your username/password.
The second, called ubcsecure, can authenticate with either WPA2 or WPA ( it shows up as WPA2-Enterprise).
The encryption method is AES for WPA2, and TKIP for WPA.
EAP type: PEAP v0 , Authentication protocol is MS-CHAP-V2
there is an option for mutual authentication using a certification server:
secure.wireless.ubc.ca
I am unable to connect to either using the stock HTC magic ROM, the HoFo community rom, and most recently, myHero 1.0.1
I have tried editing /system/etc/wifi/wpa_supplicant.conf to include
network={
ssid="ubcsecure"
proto=WPA
key_mgmt=WPA-EAP
pairwise=TKIP
group=TKIP
eap=PEAP
identity="[email protected]"
password="password"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
}
Any ideas as to how to connect?
Data wipe.
Try to reset your phone's basic settings.
It could rebuild the information necessary to acquire the specific IP from their connection.
Manually entering the data couldn't hurt either. This is something that usually I would consider consulting the school about. Privatized internet connections could cause a number of issues for those seeking to utilize Wi-Fi.
The NAT settings might be too strict to support a handheld device.
Me too!
have you found any other solution??
i m here in ubc as well with my htc magic 1.5
when i'm trying to connect to ubc,, it keeps requiring the ip but doesnt connet
and ubcsecure doesnt even show up!
is really frustrating not being able to use internet in universityyy..
i thought by activating the wpa enterprise will work for the ubcsercure, i guess not??
will any of the heros rom work??
Im having this problem too.. anyone find a fix?
I have no idea why but ubcsecure seems to be working using JesterBlur ROM. http://forum.xda-developers.com/showthread.php?t=567122
it works on the Dream? or sapphire? I don't think it matters but... be interesting to know
Dream. Theres a version for the Sapphire. Maybe give it a shot? ubcsecure still working here.
Ask for working setting
absolutcamper said:
Dream. Theres a version for the Sapphire. Maybe give it a shot? ubcsecure still working here.
Click to expand...
Click to collapse
Did you use the UI setting or you edit the "wpa_supplicant.conf" file manually?
would you please send us your "wpa_supplicant.conf" file or its ubcsecure part? it would be the great help to have a working setting.
Cheers,
Ali
I used the UI that came up during first boot. How can I get to that file?
the wpa_supplicant is in /data/misc/wifi. But considering how it works using the ui settings, i dont think changing the config file will work...but please still post it.
I also tried replacing the wlan.ko from the jesterblur rom... and doesnt seem to be compatible with magic which is apparently normal because there is a patch for magic users that fixes wifi apparently. I will try the wlan.ko from the fix soon probably to see if it works.
Hi guys,
I'm at UBC with the same problem (I can't even connect to the regular UBC network). I went to the UBC help desk and they basically told me that they don't support android at all. The funny thing is I can connect to the fatport network with no problems but cannot connect to ubc, ubcsecure or eduroam networks on campus. I'm currently runnning on Cyanongen 4.2.4 (waiting for 32a kernel to upgrade to 4.2.5) on a rogers htc magic.
Anyway, the point of this post. If anyones interested in meeting up at UBC to find a solution to this problem it'd be great. I'm hoping we can eventually create a package of some sort that'll fix any android phone but lets focus on fixing the current prob first.
Also @fnkaze - aren't the dream and sapphire the same thing?
Er, i think the dream is the G1 and the sapphire is the G2 aka the rogers magic... well i think the dream has a differnt wifi driver? maybe.. thats the problem
I think the reason why they dont support android is because the stock rogers rom doesnt have native wpa2 support i think.... but the custom roms should have it.. the hero rom does have it... at home my wpa2 wifi works fine
I can also connect to fatport, i think the eduroam is also using the same thing...tho ive heard eduroam seems to work on the rogers rom at different univeristies..
I still have yet to try the jester rom wifi driver tho, ill try it soon...
Thanks for the clarification. And the reason eduroam works at other universities is because the WPA encryption settings are based on the uni's actual/main wireless network. So at different universites the authentication protocols might be a bit different.
What phone do you have? The dream or the magic? The jester rom doesn't work on my magic.
i have the magic, but i think it should work on the magic, they also have a seperate patch to get Wifi working for the it.. so im assuming its possible..
So yeah, Concordia University in Montreal has the same WPA2-Enterprise and this is how I got WIFI to work on my Magic (with HoFo's Sense UI ROM, would still probably work with a rooted 1.5/1.6 ROM)
In fact it will probably work with any rooted Dream or Magic
Remember you need your phone to be rooted for this to work, you will also need to have the drivers installed for your phone from the Android SDK.
- Go into recovery mode
- mount the /data/ folder
Code:
adb shell mount /data
- With ADB Pull the /data/misc/wifi/wpa_supplicant.conf file to your computer (in this example it will go to the tools folder where you have your androidsdk)
Code:
adb pull /data/misc/wifi/wpa_supplicant.conf .
- Make a backup of your conf file in case you mess something up
- Edit it and add in the configuration settings given by your University for Linux wpa_supplicant.conf files, so in your case
Code:
network={
ssid="ubcsecure"
proto=WPA
key_mgmt=WPA-EAP
pairwise=TKIP
group=TKIP
eap=PEAP
identity="[email protected]"
password="password"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
}
- With ADB Push the wpa_supplicant.conf from your computer to the /data/misc/wifi/ folder
Code:
adb push wpa_supplicant.conf /data/misc/wifi/
mydewji13 said:
UBC help desk and they basically told me that they don't support android at all.
Also @fnkaze - aren't the dream and sapphire the same thing?
Click to expand...
Click to collapse
Honestly that person at the helpdesk probably doesn't even know what Android is. If they says they don't support Android at all, well using their logic any Linux distro using wpa_supplicant.conf isn't supported which OBVIOUSLY isn't the case.
And no the Dream and Magic are far from being the same device.
Thanks!
I'll try this solution and see if it works. Will post back to let you know how it goes.
Hi,
Ok, I just finished installing the sdk, fixing udev to recognize my phone etc...
The problem I'm having is that everytime I run:
Code:
adb shell mount /data
I get the following error:
Code:
mount: cannot read /etc/fstab: No such file or directory
Help?!?!
NVM after reading the adb -help i tried this:
Code:
adb pull /data/misc/wifi/wpa_supplicant.conf /home/myuser
Ok something really wierd happened...I pushed a new wpa supplicant file and the rebooted the phone and it stopped seeing wireless networks! But ubcsecure showed up as a known network. If I long press it an 'forget it' I can see networks again, but still cant connect to any ubc network?
WTF>?
Is there anyway I could use by ubuntu wpa_supplicant settings? Anyone know where the file is on Karmic? b/c I cant find it at all
hi
vpn can be connected in revolution 6.1.4 but i can not get into any site....
what's the problem????
It could be a dns related problem, as a start try to connect remote site using ip address. Btw. are you using your phone's vpn client or something else?
jms-xda said:
It could be a dns related problem, as a start try to connect remote site using ip address. Btw. are you using your phone's vpn client or something else?
Click to expand...
Click to collapse
I made a L2TP Connection which i use for my pc without any problem....
hello
I havent received any answer yet.....
VPN on Android 2.3.5 ARDH 6.1.5
I managed to get PPTP working on my android phone running 2.2
I used the stock VPN settings screen to do this.
1. Settings->Wireless and Network-> VPN Settings.
2. Add VPN
3. Add PPTP VPN
4. VPN Name - whatever
5. Set VPN server: (or whichever server you want to use)
6. Enable Encryption: UnCheck
Then save and you'll be brought back to the VPN settings screen. Select the newly created VPN entry, and you'll be prompted for your username and password. Be careful about typing your password in, its difficult with the onscreen keyboard.
Mine connects after that.
L2TP doesn't work for me though.
K73
ARHD 6.1.5
bmojtaba said:
hi
vpn can be connected in revolution 6.1.4 but i can not get into any site....
what's the problem????
Click to expand...
Click to collapse
Try ARHD 6.1.5 , maybe more luck...
http://forum.xda-developers.com/showthread.php?t=840040
Hello Hello,
So am i am trying to FTP into my nexus player with no success.
1) download ssh server apk to NExus Player and set it up
- found ip address through network-->"my ssid"--> status info
2) via winscp typed in ip address from step 1 and port# from step 1 (when setting up the ssh server)
3) username: root password:abc123 (i found this from the firetv, but it could be the issue but i am not even getting an authentication error)
I just get a hang.. doesn't do anything, the connection times out. I Tried making a username and password via sshserver settings, but that didn't work either.
Am I using the wrong IP address? username? password? some help would be greatly appreciated ; >
johentie said:
Hello Hello,
So am i am trying to FTP into my nexus player with no success.
1) download ssh server apk to NExus Player and set it up
- found ip address through network-->"my ssid"--> status info
2) via winscp typed in ip address from step 1 and port# from step 1 (when setting up the ssh server)
3) username: root password:abc123 (i found this from the firetv, but it could be the issue but i am not even getting an authentication error)
I just get a hang.. doesn't do anything, the connection times out. I Tried making a username and password via sshserver settings, but that didn't work either.
Am I using the wrong IP address? username? password? some help would be greatly appreciated ; >
Click to expand...
Click to collapse
Don't FTP, SCP/SFTP. Research what you are doing / trying to do better, it seems you are on very thin ice.
Use username and password from SSH Server settings.
Also, you don't need to manually install it with sideload, you can just go to https://play.google.com from a browser and then use install and choose Nexus Player. Of course logged into the same Google account as the NP.
Does anyone know how to get a remote shell on NP? Since SSH Server can't produce a shell on x86 devices.
Also remote adb doesn't work on latest firmware AFAIK.
Edit: Created a separate thread about remote shell - http://forum.xda-developers.com/nexus-player/help/remote-console-nexus-player-how-adb-ssh-t3000595