Hi! Wile configurating a new WiFi connection, after choosing WPA and TKIP, then PEAP the pda don't let me to chose the cer i need (Thawte Premium Server CA). What can I do? help me guyz
I had the same problem and added this value to your registry:
\HKLM\Comm\EAP\Extension\25\ValidateServerCert=dword:00000000
now it works for me.
Brubbel
ok..I try..thx man..
Related
I have a O2 XDA-EXEC Pocket PC I am having problems setting up my WiFi connection and cannot seem to find out what to do to resolve.
When using my laptop wifi connect I set up the following
My network name (iiscwlan)
Authentication WPA
Data Encryption TKIP
802.1x EAP Type as PEAP.
Then under configuration of PEAP I uncheck Validate Server Certificate and all connects perfectly
TO KNOW MORE DETAILS ABOUT THIS CONNECTION VIST http://www.serc.iisc.ernet.in/LAPTOP_ WN_conf.htm
With the O2 XDA-EXEC I do the same but there is no configuration setting under PEAP to enable me to uncheck Validate Server Certificate. Every thing I do while attempting to connect using the O2 XDA-EXEC I get the following error messages:
Server Validation Error - The server certificate is issued by an unknown authority
and
Cannot log on to the wireless network. This network requires a personal certificate to positively identify you.
Does anyone have any idea how to disable validate server certificate under Windows Mobile 5.0???
Hi,
i used 802.1x authentication on my MDA.
The only thing you have to do is to add a DWORD Regestry Entry under HKEY_LOCAL_MAICHNE-->Comm-->EAP-->Extension-->25
Name:"ValidateServerCert"
Value: 1 to activate Validation, 0 to turn it off
If you need a Regestry Editor you can use PHMRegedit.
THANK YOU
Thank U Man
Thank U So Much.......................
Thanks A Lot...........................
THANK YOU
Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You
XDA EXEC WiFi Problem
Please advise me how to get connected with WLAN of university by using XDA EXEC. I tried a lot, but not successful.
When I click on 802.1x EAP type PEAP, properties, then it says "Network requires a personal certificate to positively identify you".
But with other windows mobile 5 device having 802.11b/g, it works well.
Please help me to rectify this problem.
Thanks a lot in advance.
[email protected], Scotland, UK
solution
the solution for ur problem is also same that is given above
goto registry using any soft ware and do as it said
i had a same problem on my xda exec
the solution for this is ..............
instal a personal cretificate....
u can try it from here
http://www.jacco2.dds.nl/networking/p12imprt.html#Download
even if after instaling
if it says validation error try this
The only thing you have to do is to add a DWORD Regestry Entry under HKEY_LOCAL_MAICHNE-->Comm-->EAP-->Extension-->25
Name:"ValidateServerCert"
Value: 1 to activate Validation, 0 to turn it off
Hi,
the solution i have written above makes you visible for a "man in the middle"-Attack so if you can get a Personal Certificate from your Administrator it would be a better solution.
In my case the Administrator was not able to create a valid certificate so i tried this one.
vickydada said:
i had a same problem on my xda exec
the solution for this is ..............
instal a personal cretificate....
u can try it from here
http://www.jacco2.dds.nl/networking/p12imprt.html#Download
even if after instaling
if it says validation error try this
The only thing you have to do is to add a DWORD Regestry Entry under HKEY_LOCAL_MAICHNE-->Comm-->EAP-->Extension-->25
Name:"ValidateServerCert"
Value: 1 to activate Validation, 0 to turn it off
Click to expand...
Click to collapse
So I installed WM6.0. The option to turn off validation is not there. Attached are the options. Any ideas?
wishmaster270 said:
Hi,
i used 802.1x authentication on my MDA.
The only thing you have to do is to add a DWORD Regestry Entry under HKEY_LOCAL_MAICHNE-->Comm-->EAP-->Extension-->25
Name:"ValidateServerCert"
Value: 1 to activate Validation, 0 to turn it off
If you need a Regestry Editor you can use PHMRegedit.
Click to expand...
Click to collapse
Hello, i have the same problem with validation, but ading regestry key did not help. my phone is htc touch. can anybody sugest any option ?
i also have htc touch and cant connect to 802.1x at university.. please help
hi
Where's are stored my wifi paswords please ? Because it put wrong old username and i need each times or randomly retape the new username (domain not need) for be connected.
It's in wpa + tkip + certificate (for french users i speak about freephonie SIP so i need be autologin to be ergonomic... )
thx in advance
Simply delete freephonie profiles from wifi manager and recreate one again!
no already done it come back
Hello,
planning to upgrade my PDA to an other WM6 rom,
I would like to get my passphrase before to still have access to my
profssionnal network.
(key which has not been setup by me) for wifi WPA-PSK TKIP
all I se from wifi cfg interface is an hided password .
is it possible to get the passphrase from registry / cfg file/ plain txt / with tool?
thx
no one has a solution to unclear the password ?
Hello.
Eduroam..
I require to connect to wifi spot, which is broadcasting with user and password , securew2 for PC to work.
Is there a way to connect to it, via htc tattoo?
The options WPA-enterprise, Ttls, with no certificate needed.
I have to insert: username: X99999 (ex)
Password :XXXX
domain: medline.med.pt
How do i put that? i tryed wify helpper .. well nothing works?
A guy told me to replace the file: wpa_supplicant.conf which i think is at /etc/wifi/ but can also be found on the /system/bin i guess... which i need to replace?
this is the text to replace on that file:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
ap_scan=1
network={
priority=2
ssid="e-U"
scan_ssid=1
# proto=WPA
key_mgmt=IEEE8021X
eap=TTLS
phase2="auth=PAP"
ca_cert="/root/FMUP-ROOT-CA.pem"
identity="[email protected]"
password="colocarpassword"
phase2="auth=PAP"
}
Click to expand...
Click to collapse
I've connected do eduroam with no problem. Just turned on Wireless, and pressed at the eduroam spot.
Then just choose Set EAP Type to PEAP and Set Phase 2 Authentication to MSCHAP2.
Then just introduce you user and password.
Cheers
i'm studying in Seville and i must use eduroam too. i've bought today a tattoo, but have not yet, til tuesday...in my faculty, we use TTLS, such mmike21, not MSCHAP.mmike, you're in the right direction, such android is linux, i use, wpa-supplicant to connect to eduroam in debian. i can not even be of more help because I don't have the tattoo, but when i have maybe I can help. greetings
hello friends
today i m showing you a 100 percent working wpa_supplicant for galaxy s2 gingerbread rom for ad hoc network. yes it is test by me and also this is modified by me too. no one is responcible and cant take credit for developing it. currently i m using and testing on litening rom 6.1 and it works flawlessly. so no more wait for new wpa supplicant. becoz wait is over now. use it and reply me about ny bugs. i will try to revamp it. bye
download attachment and use it
if u like my work then plz donate me on my paypal account
[email protected]
and plz reply thanks
This is great!!! Tested on my galaxy SGS1 and works perfectly!
Thanks!!!
Edit: i can connect only if i set my ad-hoc network unproteced. If i add wpa2 or even wep security the phone gets stuck on "Obtaining IP address...", but it could be my ubuntu notebook.
Awsome sauce!!! Been waiting for this. Downloading and testing it now on my SG1.
Thanks
edit: just realised it is not a CWM flashable zip. Where do I put this?
edit2: figured out where to put it so dont worry. Cannot obtain IP address though on an unsecured ADHOC network.
what is this ?
It alows your phone to use your laptop/desktops internet connection. Create an ad-hoc wireless network on your laptop/desktop and then search for that network on your phone connect and voila your phone should now use the interent through your laptop/desktop.
I like it cos it means I can use my internet connection at work instead of 3g.
SGS2 on lite'ning v4.2 (2.3.4)
Open: 'obtaining IP' loop
WEP: 'obtaining IP' loop
WPA: [no connection]
it is not cwm file. first u have to unzip it then copy and paste this on system/bin folder on ur rooted gs1 and gs2.but this will work perfectly on gingerbread 2.3.4
hi haymzee
you should use litening rom ver 6.1 not 4.2 otherwise it will not work correctly.so first update ur rom in 6.1 and then use this wpa file ok
OH YES! will test and report; long awaited!
I can connect in the morning but after turn airplane mode on-off, then I can't connect till now.
It shows obtaining IP address, even I try to re-boot both phone. T_T
Hello everyone,
I finally managed to solve the problem of connections
thanks
hi to everybody,
thank you for your work!!!!!!! is perfect!!!!
hi,
i'm running LeoMar75 Revolution 2.6, and this wpa_ did not pass obtainig ip loop.
neither wit unprotected or wep protected adhoc network
guidox79 said:
Hello everyone,
I finally managed to solve the problem of connections
thanks
Click to expand...
Click to collapse
Hello, how did you manage to solve the looping 'Obtaining IP address.." problem ?
Also got the same problem of Obtaining IP address. I tried many configurations of changing the ip address manually with static ip address settings
Its working perfectly on our rom.
10 char will b built in in the next release
For all noobs:
Use root explorer
Unzip and put the file in system/bin
Reboot
Done.
Now test
Sent from my GT-I9100 using XDA App
I use LogMeIn.apk
any solution for GB 2.3.5 ???
I've tried ad hoc on 4 different laptops and it only worked on the newer ones
I can confirm this works 100%. I tethered the internet connection on my Macbook Air with the phone using AdHoc Wifi successfully.