unlocking vogue 6900 - Touch CDMA General

I have been trying for quite some time now to unlock this phone, every time that I try it always comes up with 2.00.CoKe, no matter how fast slow or many times that I do the unlocker. If anyone has a suggestion then I would appreciate it.
I have followed this forum.ppcgeeks.com/showthread.php?t=20370 to a "t" like instructed.
I have:
Vogue 6900
r 3.42.30
.netcf 3.5

could u explain me in a better way what u want to do?
do u want to install a different custom ROM on it?
or u want to get running on a different carrier???

try the thread here: http://forum.xda-developers.com/showthread.php?t=592964
it's a step by step guide

Related

want to unlock my titan and flash a custom w6.5 rom...its my 1st time

...and i would like some suggestions, maybe a point in the right direction from the experts here plz, some step by steps would be nice . Any help would be greatly appreciated
thank you
JMQUINT00 said:
...and i would like some suggestions, maybe a point in the right direction from the experts here plz, some step by steps would be nice . Any help would be greatly appreciated
thank you
Click to expand...
Click to collapse
http://forum.ppcgeeks.com/showthread.php?t=33857
http://www.htcwiki.com/page/Hacking+HTC+Mogul
http://www.ppckitchen.org/forums/showthread.php?t=32
You said you need a step by step?
Here you go. There is three different ones. The first one and last are the same author just different locations.
1. Need to unlock with spl first. version 2.40 or 2.47 Here is the spls
2. Flash radio HERE is 3.42.50
3. Flash the rom of choice. There are three different links in my signature. 6.5 roms
Don't hesitate to post. there are plenty of people here that know what to do. Good Luck. You can Pm me if need be.
Updated post above with the files needed to unlock and the most current radio.
Rom choice is yours.
Going to try 6.5 tonight for the first time. Thanks for the links
can I use those files, even if I am on Telus in Canada? or do I need different radio and rom?
For most ROMs (Ryan's are the main exception that I am aware of), you will simply need to install the appropriate carrier cab and you will be fine.
http://dcd1182.n715dp.com/index.php?dir=titan/carriers/
sweet - thought I saw that somewhere. This thread is going sticky for me!!!
another question - do I have to enable GPS everytime I hard reset now?
or are the ROM's already have the info for the GPS instead of having to QPST and put in the values?
it would be nice to have to just sync contacts then load the apps I want off of a sd card, and that's it. Could almost do that on the go.......sweet
typhoonk said:
sweet - thought I saw that somewhere. This thread is going sticky for me!!!
another question - do I have to enable GPS everytime I hard reset now?
or are the ROM's already have the info for the GPS instead of having to QPST and put in the values?
it would be nice to have to just sync contacts then load the apps I want off of a sd card, and that's it. Could almost do that on the go.......sweet
Click to expand...
Click to collapse
You will not need to re-do any QPST settings unless you flash a stock ROM. You will need to re-do your registry settings each time, though. You can import those easily, though, so it's no big deal. Using an auto-install program such as UC (if the chef supports it) or SASHIMI (if they don't - and this one is my personal preference) makes reflashing a snap. It won't take you very much time at all to have all of your cabs and most of your settings automatically get set up for you.

Hard-Spl or not?

Hllo...
I'm thinking about upgrading my touch cruise to official WM6.1 ROM
http://www.htc.com/www/SupportDownload.aspx?p_id=59&cat=2&dl_id=113
this will be my first time doing it...
first of all, i would be happy if you can give me a good guide.
second:
1. i don't realy know what is hard-spl and what exactly does it unlocks.
2. if my phone is sim free do i need hard-spl?
3. what will happend if i install the ROM without hard-spl?
4. what will happend if i use hard-spl wh don't really need it?
Thank you all!!!
1. It doesnt unlock anything itself, it takes measures to avoid ruining your phone when flashing, more when you flash often as we do here.
2. HardSPL has nothing to do with SIM unlocking, you can use HardSPL in a SIM locked/unlocked device.
3. Most likely nothing with OEM ROMs as you want to, but if you will flash often, or want to try a cooked ROM, it will be a smart idea to use it, besides, some cooked ROMs behave better in a device with HardSPL installed.
4. Just your phone will be much safer next time you flash ROMs.
Thank you....
Can someone please give me a link to the best and newest Hard-SPL for Touch Cruise?
Thanks Again...
It is a sticky and one of the first threads on the upgrade page:
http://forum.xda-developers.com/showthread.php?t=351964
A good thread with screenshots for instructions:
http://forum.xda-developers.com/showthread.php?t=370434

Need Help for flashing Custom Rom (I'm German)

Hello, I found this Tutorial : http://thewingster.com/howtoflashnbhuspl.aspx .
Is it enough when I do all steps in the tutorial above or do I have to do this method before flashing ( http://forum.xda-developers.com/showthread.php?t=358225)
I want Just Stable 6.1 on my Device.
Please help me.
My Device is a GERMAN HTC Herald HERA 100 GERMAN
My Bootloader says following:
IPL 4.17.0001
SPL 4.17.0000
with best regards
w220fan
Problem solved
Ok, Now I have Blue Clear Manilla 2D Windows Mobile 6.1 ROM on my device.
How did you do it
Hi, i'm using the same divice and want to flash it to. Wich of that both toturials did you use?
Its very simple
Hey man, its very easy now for me to flash my device.
I did the folowing steps
1. Go on thewingster.com and choose a nice wm 6.1 rom
2. Then follow this http://forum.xda-developers.com/showthread.php?t=358225
(you must do that, other wise you will brick your device)
3. Then I followed this http://thewingster.com/howtoflashnbhuspl.aspx
4. Congratulations, now you have a new rom
if you need more help please contact me !
But i don't know, if i want try a new rom now, that i must do the step 2 again ??? I think not.
Please help me with this question !! Please
HardSPL
For my undersanding by reading the toturials: if you've made the HardSPL its donne. You only have to do that for one time.
From now on you can change the roms of your choice.
Okay thanks, by now, I have a hacked device, really nice.
Did you understand the two tutorials ??
yes
Yes, i do undeerstand them. But for shure i did read everything i cold find about poblems by doing that.
I think, i'll give it a try this evening.There are a lot of ROMs much better then my WM6.0.---And I need that little more RAM comes with those clean ROMs
Please let me know, if it worked for you man.
Hey, did it. Worked like a charm.
Now i try to find my favorite rom.
back to normal
If I would take the phone back to normal wm 6.
May i have to delete the spl.nbh file in original RUU-Folder ??

Wm6.5 step-by-step procedure needed to a newbie!

Greetings & Salutations,
I want to update my current WM6.1 professional to WM6.5!
I am very eager to work in WM6.5 environment.
After reading a tonnes of thread around at XDA I am even more confused.
And being a NEWBIE have added the ice on the cake.
Any Master out there who can help me out?
Please I want a procedure to updated my WM!
step 1:
search topics about USPL. u need to do that first to prepare your phone for custom 6.5 roms
step 2:
pick a 6.5 rom of your choice and flash your Artemis
be sure to follow exact steps as described in the topics if else your phone will be "bricked"
hi,
In my opinion 6.1 is more suitable for processor 201Mhz. But you can try shady 313 ROM.
[]s
mvenneker said:
step 1:
search topics about USPL. u need to do that first to prepare your phone for custom 6.5 roms
step 2:
pick a 6.5 rom of your choice and flash your Artemis
be sure to follow exact steps as described in the topics if else your phone will be "bricked"
Click to expand...
Click to collapse
One question...
How to choice the best ROM when you are new in this?
the first question is valid, it's needed a step by step for dummies, reading the whole forum is way complicated for normal people.
I understand your confusion. We all had to go through the first phase of reading up. None of us instantly knew what to do and which ROM was the best. Just try and find out, that's all I can give you.
...
click the link in my signature for
UPLOADS FOR P3300
there is an upload here for uspl 1.1.cmon (its labled wrong i know but cba to change it)
download it..
there i have supplied a dummies guide inside..
1 thing though..
i have wrote to do a soft reset IGNORE that..
(dont reset.. just be patient and it will work)
there is some cabs worth downloading there too.. i suggest you do..
Rn
...
as for recomended roms..
in my experience..
babbelut rom is the BEST 6.5 rom
andrew82 is the BEST 6.1 rom
Rn

HD2 flashing help

Hey,
I know i sound dumb but i dont care, tried reading through various sticky's and seem so confused with it all
Just got a HD2, updated the rom to the new stock rom of tmobile from htc website seems a bit better than the older rom thats for sure
really need a step by step guide of what i need to do to put the artemis rom on my fone as its seems like a great rom to put on the fone thats stable for everyday use, but dont know where to start or what to do...
anyhelp wud be good, or if people think its easier doing it another way let me know, i tried having a bash at whatever i can manage, but this seems a wee bit out of my grasp....
ty for reading
comon!! search!!
look here step by step guide. even a sticky!! in the section rom developement.
http://forum.xda-developers.com/showthread.php?t=609477

Categories

Resources