Rooted the N1 - Now What? - Nexus One General

After lurking forever I finally pulled the trigger and rooted my N1. Painless.
Fastboot to unlock the bootloader - Check
Flashed Amon_RA recovery image - Check
Created nandroid backup - Check
Flashed nexus-addon-0.1-signed.zip - Check
Confirmed su working - Check.
Now what? Is it just as simple as putting a new ROM on my SD and reflashing?
Or do I need to do it through adb?
I know each of them seem to have different instructions. Some need you to wipe before, others you can flash over the top of your existing ROM.
Is there a standard way that works across all ROMS when it comes to flashing? Should there be to make is easy for the rest of us?
Thanks in advance.

Put a rom in and flash from recovery!
Shouldnt be too hard as you have gotten mostly everything done already! I would recommend trying out the Desire rom from MOdaco! Check the development section. download it and try it for yourself and or Cyanogens Rom!!!!

mr_skot said:
After lurking forever I finally pulled the trigger and rooted my N1. Painless.
Fastboot to unlock the bootloader - Check
Flashed Amon_RA recovery image - Check
Created nandroid backup - Check
Flashed nexus-addon-0.1-signed.zip - Check
Confirmed su working - Check.
Now what? Is it just as simple as putting a new ROM on my SD and reflashing?
Or do I need to do it through adb?
I know each of them seem to have different instructions. Some need you to wipe before, others you can flash over the top of your existing ROM.
Is there a standard way that works across all ROMS when it comes to flashing? Should there be to make is easy for the rest of us?
Thanks in advance.
Click to expand...
Click to collapse
Welcome to the world of root! Congrats!
Always back up first, then wipe, then flash the .zip from the root of the phone. That way you can restore if you futz it up. It's that easy.

Usually when you're upgrading a Rom with a new version the person has put out you won't need to wipe, example going from Cyanogen 5.0.3>5.0.3.1 but if you're using different peoples roms you'll always need to wipe. Sometimes you will for an upgrade and the dev will state this, just always read their instructions and always backup before flashing anything. Have fun

drpfenderson said:
Always back up first, then wipe, then flash the .zip from the root of the phone. That way you can restore if you futz it up. It's that easy.
Click to expand...
Click to collapse
Thanks for the input. Just a few more questions:
1 - If I do a nandroid backup won't that overwrite the last backup? Can I rename the nandroid folder on the SD card before doing another backup?
For example, I currently have a backup of the stock rom. Can I rename the nandroid folder on the SD card to something like "/nan_bu_stock" before I run another nandroid backup?
2 - Then I select the wipe option from the RA's recovery correct? This won't wipe the SD card too will it, just simply wipe the device back to 'factory' correct?
3 - Then do I place the new ROM .zip file on the root of the SD card or the root of the device? I'm assuming I select the RA 'flash from .zip' option to flash the new ROM correct?
Thanks

mr_skot said:
Thanks for the input. Just a few more questions:
1 - If I do a nandroid backup won't that overwrite the last backup? Can I rename the nandroid folder on the SD card before doing another backup?
For example, I currently have a backup of the stock rom. Can I rename the nandroid folder on the SD card to something like "/nan_bu_stock" before I run another nandroid backup?
2 - Then I select the wipe option from the RA's recovery correct? This won't wipe the SD card too will it, just simply wipe the device back to 'factory' correct?
3 - Then do I place the new ROM .zip file on the root of the SD card or the root of the device? I'm assuming I select the RA 'flash from .zip' option to flash the new ROM correct?
Thanks
Click to expand...
Click to collapse
No, it wont overwrite it, it will create a new folder with the latest backup and the folders will be named depending on the date. such as 2/25 with a whole bunch of letters. you can also rename it from the sd-card
Answer 2 - no it wont wipe sd card.
Answer 3 - you place it on the root of the sd-card!

And finally....
After the .zip from the new ROM is on the root of my SD card I use the 'flash zip from sdcard' option ?

mr_skot said:
And finally....
After the .zip from the new ROM is on the root of my SD card I use the 'flash zip from sdcard' option ?
Click to expand...
Click to collapse
It is as easy as that, but make sure you wipe first else you will likely get errors, enjoy CyanogenMod.

mr_skot said:
And finally....
After the .zip from the new ROM is on the root of my SD card I use the 'flash zip from sdcard' option ?
Click to expand...
Click to collapse
Yep, its that simple. Select that option, then select the zip file for the ROM.

Related

[Q] need help flashing MoDoCa and CM7

I am having a heck of a time tryingto flash a new rom onto my nexus s. I have downloaded MoDoCa and CM7 and put both .zip's on my SD card.
When i go to install via clockwork, its verifies the install and fails saying it cant find any of the packages. I left the files as a zip, i also extracted wthem within the same folder.
Im so lost why this wont work. Also the backup's i made before flashing dont wanna flash either. I can only get barebones 2.3. HELP!
Are you using version 3.0.0.0 or higher of Clockwork? That's one of the requirements on Modaco's ROM.
You should leave the Modaco rom as a zip. Put it in the root of your sdcard.
I think what's happening to you is that you're trying to flash it the wrong way.
In Clockwork, don't select the flash update.zip file, what you need to do is choose the menu option to flash a file from the sdcard. This puts you into a selection mode screen where you will navigate through the files and folders in the sdcard to the one you want to flash, then select it and flash away.
Have you tried it that way?
EDIT: P.S - you don't "flash" nandroid backup files, you restore them from the backup/restore menu option in Clockwork. You probably know that, but just making sure, since there shouldn't be an issue restoring them.

Proper update procedure for Axura

Hi guys,
Well when I flashed my ROM I used the NOOB thread and installed this version:
http://forum.xda-developers.com/showthread.php?t=821468
Now I realize I should have updated to this version:
http://forum.xda-developers.com/showthread.php?t=891657
I have the update.zip and the new Axura zip on my root directory but when I reboot in recovery and click "re-install packages" it does something ...maybe re-roots?...and just goes to the normal Axura boot screen and starts up current installed version. I do have ROM manager and Titanium installed.
Obviously I'm missing something silly. Also, is there any real reason to update a month old ROM or am I ok leaving them on there for a long time?
Thank you...you guys rock!
Get into the green recovery screen. If you first load up recovery and it's blue then hit reinstall packages. You may have to do this twice for it to go to the green clockwork recovery.
Next navigate to install .zip from SD. Navigate to the new Axura file and select it. Navigate down to "yes" and wait for it to complete.
One pre-caution:
If you named the Axura ROM as update.zip and try to go into CWR it might throw you back to the normal recovery (blue text), if you hit re-install packages it will try to do it via update.zip (your Axura), and you will end-up with the square one.
Go to your phone, rename the Axura download from update.zip to something different, i.e. axura_rom_latest.zip, copy recovery-update.zip from /sdcard/clockworkmod directory to /sdcard as update.zip, and go back into recovery and re-install packages, it will bring you to CWR with green text.
HTH
lqaddict said:
One pre-caution:
If you named the Axura ROM as update.zip and try to go into CWR it might throw you back to the normal recovery (blue text), if you hit re-install packages it will try to do it via update.zip (your Axura), and you will end-up with the square one.
Go to your phone, rename the Axura download from update.zip to something different, i.e. axura_rom_latest.zip, copy recovery-update.zip from /sdcard/clockworkmod directory to /sdcard as update.zip, and go back into recovery and re-install packages, it will bring you to CWR with green text.
HTH
Click to expand...
Click to collapse
Nice catch and clarification.
Lordjish - Let us know how it goes.
I'm confused I have the new Axura ROM zip file on my phone but it's not named update.zip - the rooting zip is named that. The Axura ROM is named whatever the developer named it still.
1. Do I Need to change the name of the ROM then?
2, Should I remove the rooting "update.zip" I downloaded from the NOOB thread?
If so, should I just have the new ROM in there by itself?
Also my Root seems to be corrupted as Titanium cannot gain root rights anymore and Superuser Permissions won't run. This is surely my fault from my failed attempt and installing the new update.
I've re-named the clorkworkmod recovery zip to update.zip as you said, as well as renamed the new Axura ROM zip to "axura-update.zip" . I also moved the clockworkmod zip to the root directory on SD.
I haven't tried anything yet as I want to make sure this is what I'm suppose to do with a possibly broken "root" (superuser permissions aren't working for Titanium or ROM manager)
Also, strangely enough my computer wouldn't let me move filesthrough USB Mass storage mode that are already on the phone, but I could do it by using the phone itself to move the files.
Oh, and I deleted the NOOB thread rooting zip before moving the clockworkmod one and re-naming it the same.
Thanks again guys!
Reboot into stock recovery, reinstall packages, cwr should be available then (green txt). Install zip from sd, choose axura zip and you should be fine.
Sent from my Nero powered Vibrant
On the 16g internal memory you should now have two files - Update.zip and Axura.zip right?
If so boot into recovery and hit reinstall packages until you get to the green recovery. This sometimes takes two times.
Then navigate to install zip from SD and find Axura and let it do it's thing.
Thank you all for your help!
Updated new the newest Axura ROM and everything went without any problems.
This is addicting...
Have you heard of Gardner? I graduated high school there. Good to see a nice Kansas man in the forum. I pm you
Lordjish said:
Thank you all for your help!
Updated new the newest Axura ROM and everything went without any problems.
This is addicting...
Click to expand...
Click to collapse
Have you heard of Gardner? I graduated high school there. Do not see or hear of many people from Kansas. I pm you

[TUT] Flashing your first A500 custom ROM

Well, flashing a custom ROM on our beloved Iconias became quite easy now thanks to developers on xda. Most of you are quite familiar with the procedure but there are still people that ask basic things all over the ROM developement threads. This is just a beginner's guide, an attempt to collect all the procedures and tools in one thread. Nothing of this is my work and I would like to say THANK YOU to sc2k, thor2002ro, Euclid's Brother, Chainfire, monki-magic, drellisdee, ezterry, Skrilax_CZ, gersma and all A500 developers for making this possible.
You will need the following: external SD card, root rights, unlocked bootloader (if you're on stock ICS), custom recovery and a custom ROM of your choice.
Well lets start by placing an SD card in the SD card expansion slot. Its file system should be FAT32!
*This is optional: To be sure it is recognized later in CWM, format it first with SD Formatter - a tool that can be downloaded from here. Use your home computer / notebook with a card reader for this procedure. Alternatively you can do this using an ANDROID phone.
1.ROOT
Root for Honeycomb 3.0.1 by monki-magic
original thread by Slowie911 here
1. Make sure usb debugging is turned on and unknown sources is selected in Applications settings.
2. Have a micro sd card inserted and turn the tablet on portrait mode and lock it with the switch to fix it in portrait.
3. Download and execute the attached apk. (i had to download from my comp and transfer to the tablet for it to work).
4. Once the apk is installed run the root procedure within the app which was installed
5. Wait and you will receive full root access.
Download Gingerbreak 1.20
Root for Honeycomb 3.1 by sc2k thread here
1. Goto Settings->Applications and enable "Unkown sources"
2. Download the attached APK file
3. Copy the file to your Iconia
4. Install the APK & start the tool
5. Click "root"
6. Enjoy
/IconiaRoot should work on both 3.0.x and 3.1/
Download Iconiaroot 1.3
Root for Honeycomb 3.2.x OTA
Unfortunately there's no dedicated rooting app yet developed for HC3.2. It also comes with a new bootloader. In order to get root you need to revert to an older version of Honeycomb first where Iconiaroot works. How to do that is explained in details in this thread
UPDATE: if you're on OTA HC 3.2.x then you can just update to ICS and use the method for rooting ICS - links posted below
Root for ICS 4.x.x OTA
Stock ICS Leak One-Click Root Tool by blackthund3r
or
Full root for A500 ICS 4.0.3 - Simple method, posted by ZeroNull
2. Bootloader
Since there are many new ICS custom ROMs and custom recoveries, please read in their dedicated threads if they require ICS bootloader. Some of the ROMs can recognize the version of your bootloader and load the proper boot.img during boot. In general - if you're on Honeycomb - you have HC bootloader. If you've updated OTA to ICS, then you have stock ICS bootloader, that is unusable for flashing custom ROMs and therefore you need the unlocked bootloader. A guide on how to install it read here - thanks civato. This thread links to a nice little piece of software (option 1) by gersma that can automatically do all the job for you - install ICS unlocked bootloader and custom recovery. Read and download here - AfterOTA by gersma
3.Custom recovery
original thread with clockworkmod recovery by thor2002ro here
1. Open Market app with your tablet and search for Acer Recovery Installer.
Acer recovery installer
2. Install it and then open it. It has ClockworkMod Recovery by thor2002ro rev1.3.4 built-in.
3. Select "ClockworkMod Recovery rev.1.3.4 by thor2002ro". Tap on install Recovery Image. A popup offering to backup current recovery image will appear. Surely, buckup! Thus you can restore your original recovery image in case of need. Then CWM will be installed. Once it is installed you can remove Acer Recovery Installer tool from your system if you want.
thor2002ro updated CWM to 1.7.3. You can download the zip from tegraowners.com. Later versions of his recovery does not meet GPL because of the "mini" kernel of his - sources not being released. It supports flashing both from internal memory and the external SD card. In order to update your CWM to this latest version, place the downloaded ZIP on your external sd card and update from your CWM by choosing install zip from sd card. Alternatively you can extract the recovery.img from the zip, place it on your external sd card and install it through Acer Recovery Installer by choosing Custom or Stock recovery.img from micro sdcard.
GPL compliant recoveries
RA Revamped for Iconia
TeamWin Recovery Project (twrp) - needs ICS bootloader
A500 Public Recovery
Since the creation of AfterOTA by gersma, you can use his software to install both the bootloader and CWM before flashing the ROM. Get it HERE
4. Flashing custom ROM
Download the ROM of your choice which should be a zip file. Place the zip on your EXTERNAL SD card. Power off your device. Now hold volume down and power buttons together until you see text appearing on the top left corner of the screen - you can release both buttons now. Wait until CWM loads. Volume keys (Up and Down) are used to navigate the CWM menu. Power button is uded as "Enter" i.e. to proceed with your selection. Before going on to install your ROM do a full backup of your system first. Navigate to "backup and restore" and then select Full Backup. Wait untill the operation completes.
Now do the following:
Wipe menu:
- wipe data/factory reset -> navigate to "Yes - delete all user data"
this should format you data partition and cache partition (dalvik cache is gone as well)
Mounts and storage menu
- Format System
this should format your system partition
The above commands are presented in thor's CWM. There are slightly different menus and sub-menus in the other custom recoveries but if you dig a little you'll find that they do the same things and you'll get the idea of what you're doing.
Now you're ready to install your ROM. Get back to the main CWM menu and select
- Install zip from sdcard -> choose zip from sdcard.
Navigate to your zip on the SD card and install it - choose "Yes" again to install. Wait untill installation is complete, return to the main CWM menu and choose "reboot system now".
You're done, enjoy your first custom ROM. Take time for its initial configuration.
5. Flashing custom KERNEL
Flashing custom kernel is as same as custom ROM. You place the zip (Kernels come in zip files as well) on your external SD card and:
- Install zip from sdcard -> choose zip from sdcard.
It is recommended before flashing a new kernel to wipe cache partition and dalvik cache. And of course first you flash the ROM and then the desired Kernel
6. UNBRICKING by flashing a stock ROM
thanks to vache we have full packages shared in his topic
vache said:
Once the desired file downloaded, you have to use Acer Update Decryter by thor2002ro to decrypt them.
After decrypting the file, you have to extract the update.zip from it, put it on an external SDCard (does not work on internal memory) and boot your tablet with Vol- & Power. The update will launch automatically.
Click to expand...
Click to collapse
p.s. Feel free to add stuff to this tutorial - video, pistures or anything you find useful or to correct me if I've made a mistake.
This is fantastic. Thank you. I have had my iconia for a month now and been looking at flashing a custom rom but kept backing out. Just a couple of questions for clarification:
(1). Does wiping data erase the internal sd?
(2). If by some stroke of bad luck a flash is unsuccessful and a boot loop or similar occurs, am I right in my understanding that you can just go straight back into recovery and re-flash?
(3). What are the chances of bricking the tablet?
Sorry for noon questions, please just wanna certain because my gf bought me this tablet under the condition I don't do anything risky like on my x10 that I flash almost daily haha
Thanks for replies
Sent from my A500 using XDA Premium App
kylec said:
This is fantastic. Thank you. I have had my iconia for a month now and been looking at flashing a custom rom but kept backing out. Just a couple of questions for clarification:
(1). Does wiping data erase the internal sd?
(2). If by some stroke of bad luck a flash is unsuccessful and a boot loop or similar occurs, am I right in my understanding that you can just go straight back into recovery and re-flash?
(3). What are the chances of bricking the tablet?
Sorry for noon questions, please just wanna certain because my gf bought me this tablet under the condition I don't do anything risky like on my x10 that I flash almost daily haha
Thanks for replies
Sent from my A500 using XDA Premium App
Click to expand...
Click to collapse
1. No, it doesn't.
2. Yes. You can do that. There's another option in mounts and storage -> format system - that will format even your system partition and leave your device bare with no ROM files on it. That would be a really clean install I guess
EDIT: I just saw that system is formatted during ROM installation. So no need to do that
3. Always read first what option you've selected and be sure you understand what it does. If you have CWM successfully installed, you have a powerfull tool to restore reflash, wipe, format etc. I've flashed my HD2 hundreds of times and now my Iconia is on the run Never ever had a boot failiure.
drkalo said:
1. No, it doesn't.
2. Yes. You can do that. There's another option in mounts and storage -> format system - that will format even your system partition and leave your device bare with no ROM files on it. That would be a really clean install I guess
3. Always read first what option you've selected and be sure you understand what it does. If you have CWM successfully installed, you have a powerfull tool to restore reflash, wipe, format etc. I've flashed my HD2 hundreds of times and now my Iconia is on the run Never ever had a boot failiure.
Click to expand...
Click to collapse
Thank you very much. I will click thanks when I'm on my computer :-D
Sent from my A500 using XDA Premium App
VERY good information here. Thank you very much for taking the time.
I've flashed ROMS on my last two "chinatabs" but haven't gotten into it with my A500 yet. (To be frank, I'm still thrilled with the prospect of OTA updates from a manufacturer after my last experiences.)
It looks like the process is very similar to my Rena3 tablet.
strider_mt2k said:
VERY good information here. Thank you very much for taking the time.
I've flashed ROMS on my last two "chinatabs" but haven't gotten into it with my A500 yet. (To be frank, I'm still thrilled with the prospect of OTA updates from a manufacturer after my last experiences.)
It looks like the process is very similar to my Rena3 tablet.
Click to expand...
Click to collapse
Thank you, that lays it out all nice and precise for us all. Like strider_mt2k, I have been holdng off on the custom ROMs, because my first tablet was a Gtab, and while it became a pretty awesome tablet, it had to be flashed with a custom ROM to be really usable. The OTA thing was holding me back. But I think that I may try to flash the thing this weekend if I get the chance.
Thanks. Glad it could be of use.
nice tutorial dude! thanks!!
could you please make another tutorial to return back to stock?
specially to return back to stock te kernel.
thanks!!!
As mentioned, best case is if you've backed up your device before flashing any ROM or Kernel. Thus you can restore to your country specific version.
Otherwise its pretty simple - its just like flashing any other ROM following the steps described.
Download the stock one that dr1337 shared from here:
http://forum.xda-developers.com/showthread.php?t=1154492
or choose the right full package - shared by vache:
decript it with Acer update decripter by thor2002ro
Of course they come with stock kernel
I am new in this with flashing and that kind of stuff.
Now is my question, how is it with updates from acer?
Greetz
distructor said:
How is it with updates from acer?
Click to expand...
Click to collapse
I'm not sure I understand your question. Could you be more specific?
if i put a custom rom on the device could i still use the build in update program of acer?
distructor said:
if i put a custom rom on the device could i still use the build in update program of acer?
Click to expand...
Click to collapse
Unfortunately I can not tell you for sure. I haven't tried all of the custom ROMs but in most cases - no you won't be able. I've tried Tabooney, Honeyvillain, Virtuous Picasso, Virtuous Galaxy. ROM developers usually update their ROMs to the latest base available. I think it depends on many things - base, kernel, stock apps removed etc.
Maybe someone who have succeeded with custom ROM updating would share his experience.
Can anyone tell me if there is a version of ROM manager that supports the version of CWM that there is for the Iconia. I would love to be able to simplify my ability to backup my ROM's before flashing.
synapses11 said:
Can anyone tell me if there is a version of ROM manager that supports the version of CWM that there is for the Iconia. I would love to be able to simplify my ability to backup my ROM's before flashing.
Click to expand...
Click to collapse
You can install a clockworkmod for Iconia no matter of the version of ROM manager. But it is much much easier to use Acer Recovery Installer. I recommend you using it instead of playing with recovery img files. It is a one time procedure after all
Anyway - here's what you need to do if you don't want to use Acer recovery installer, or you don't want to use ADB:
http://www.addictivetips.com/mobile/how-to-install-clockworkmod-recovery-3-using-rom-manager/
instead of CWM 3.x you will need to get CWM from thor2002ro In this guide you substitute the recovery that ROM Manager is about to flash with thor's CWM. I haven't tried this method myself but it should work.
With Acer Recovery Installer you can flash custom recovery as well. As long as you have it in IMG format you can be flashed from within the app - "install custom or stock recovery image from sd card".
great thread.
thanks!!!
Great Tutorial!!!
Just a couple of doubts:
First question: Backup files.
3. Flashing custom ROM
"...Before going on to install your ROM do a full backup of your system first. Navigate to "backup and restore" and then select Full Backup. Wait untill the operation completes. "
Where do the backup files go in the system? On internal or external SD card? Is it an *.img file extension?
Should i move it to my computer to keep it save, or just leave it where ever they are?
Second question: Kernel.
4. Flashing custom KERNEL
"Flashing custom kernel is as same as custom ROM. You place the zip (Kernels come in zip files as well) on your external SD card and:
- Install zip from sdcard -> choose zip from sdcard.
It is recommended before flashing a new kernel to wipe cache partition and dalvik cache. And of course first you flash the ROM and then the desired Kernel"
I am on Stock 3.1 ROM with original Kernel, if i want to try Virtuos Picasso, do i have to flash a new Kernel? And if yes, shouldn't i do it before flashing the ROM? Or just flash the ROM and then the Kernel? What happens if i just flash the Rom and use the stock kernel?
Thank you..
Your backup goes to your external SD card in a folder named clockworkmod\backup\2011-XX-XX.HH.MM.SS
As you can guess the name of the backup corresponds to the time it is created. This backup can be used to restore your system through CWM in case of need.
CWM does not backup /data/media folder. Additionally: you should also delete .android_secure.img from your backup set or a full restore will fail before it restores flexrom.
The last is an issue described by Euclid's brother:
http://forum.xda-developers.com/showpost.php?p=16467191&postcount=3
I am on Stock 3.1 ROM with original Kernel, if i want to try Virtuos Picasso, do i have to flash a new Kernel?
Click to expand...
Click to collapse
No, of course! Your custom ROM (Virtuous Picasso in your example) and any ROM comes with its Kernel. Its up to you to decide wheather to change it or not after that by flashing another Kernel. Follow every Kernel developer's notes for ROM compatibility. So, that answers the last part of your question - you cannot flash Virtuous Picasso and still think you're on stock kernel
drkalo said:
No, of course! Your custom ROM (Virtuous Picasso in your example) and any ROM comes with its Kernel. Its up to you to decide wheather to change it or not after that by flashing another Kernel. Follow every Kernel developer's notes for ROM compatibility. So, that answers the last part of your question - you cannot flash Virtuous Picasso and still think you're on stock kernel
Click to expand...
Click to collapse
Oh, i see...i thought that the flashing ROM procedure of a custom ROM, would just flash the ROM and not the Kernel...so in this case i just have to choose the ROM that i want to flash and do not have to pay attention about the Kernel compatibility...unless i flash a Kernel only. Right?
Thank you very much!!
That is correct

Need serious help - to get my phone back to work

Hi,
My DHD is not working after a update.
I am not sure what to do now...
I have cyanogenmod 7 and When I bought it it was rooted and with S-OFF.
Today I would try to get mod with Sense 3.0 on My phone.
Actually I will get it back to Factory settings, but I not know how to go on now...
It starts up and run into the boot picture with the cyanogenmod 7 and stops and start over countiuosly.
Please help me to get further.
I got it back to work, but are there someone who can help me to get it like this
htc product legend
with the clock and the dock.
Welcome to XDA mate.
You have to know some basic stuff before flashing any ROM.
1. ClockworkMod recovery and how it works.
2. Find a ROM that you like and download it.
3. Follow the instructions written on that ROM for flashing via ClockworkMod recovery and you are done.
If you are looking for stock HTC look, you must download a Sense ROM (CyanogenMod is an AOSP ROM) and there are many of them. I would suggest reading from this post, it helped me a lot when I was new to the android scene.
If you have any questions please post here and I am sure people would be happy to help.
Remember... Search function is your friend here in XDA.
Cheers
Oh, yhea - what link you gave me there, thanks.
Could you please guide me throw my first mod. I have desited it should be this one
http://forum.xda-developers.com/showthread.php?t=1056727
Kernel - LeeDrOiD V3.2.1 - 2.6.35.13 Revised - BFS
You problably know the first time, you do this it a good ide to have some back up from anotherone who have try it before...
1.Download all files mentioned below and copy them to the root of your SD card
a. Wipe file
b. Rom File
2. Boot to ClockworkMod recovery
3. Backup your current Rom to your SD
4. Flash the Wipe file (Install Zip file from SD card option)
5. Flash the Rom file (Install Zip file from SD card option)
6. Eat a donut! (aka wait for 10-15mins)
7. You should be done.
If things go wrong, you can always restart in ClockworkMod recovery and restore your previous Rom.
Cheers
I made a nandroid with ROM Manager, and now when I need to restore it, CWM says MD5 mismatch. What did I do wrong?
ViDtje said:
I made a nandroid with ROM Manager, and now when I need to restore it, CWM says MD5 mismatch. What did I do wrong?
Click to expand...
Click to collapse
Hmmm did you attempt to move or edit the nandroid backup? As far as I can tell, if you have nothing to boot too, then your best bet would be the same as instructions below, to boot recovery, mount sd, put new rom on there super wipe, and flash new rom
Thanks button always appreciated!
naailalzuhir said:
1.Download all files mentioned below and copy them to the root of your SD card
a."Not allowed ex link"
b. "Not allowed ex link"
2. Boot to ClockworkMod recovery
3. Backup your current Rom to your SD
4. Flash the Wipe file (Install Zip file from SD card option)
5. Flash the Rom file (Install Zip file from SD card option)
6. Eat a donut! (aka wait for 10-15mins)
7. You should be done.
If things go wrong, you can always restart in ClockworkMod recovery and restore your previous Rom.
Cheers
Click to expand...
Click to collapse
Ohh, how easy it was. Tanks a lot. That was great you could simplyfied it to that level.
I think it went wrong because I did it with ROM manager. Recovery, it all went right.
Sent from my Desire HD using xda premium
ViDtje said:
I made a nandroid with ROM Manager, and now when I need to restore it, CWM says MD5 mismatch. What did I do wrong?
Click to expand...
Click to collapse
Md5 mismatch means that image is likely to be corrupt.
Google and download the md5 checker s/w. Check the md5 hash with the one posted on the forum/website where you are downloading the image.
If needed redownload the image and check the md5 hash again.
Once the md5 hashes match you may proceed flashing the image on to the phone.

How i can flash update for MAGLDR

Hello
I flash this rom: http://forum.xda-developers.com/showthread.php?t=1417472
and developer made an update http://forum.xda-developers.com/showpost.php?p=22349383&postcount=1123
I cant find how i can flash this update.
Can some one help me?
i need to rename this file to update.zip and copy it on SD card, after that in CWM chose "update"?
its correct?
you can flash it like you flashed your rom...
mickotomic said:
you can flash it like you flashed your rom...
Click to expand...
Click to collapse
i think if i do this, i rewrite my rom and i can not boot after this.
are u sure, if this correct operation?
1 - do a cwr full backup (cwr - backup and restore - backup)
2 - flash the new rom as mentioned above, 9 times in 10 it will work fine, no data loss.
if it doesn't boot after the update
3 - in cwr do a 'wipe data factory reset'
4 - flash new rom - let it boot all the way to the android welcome screen, then reboot into cwr
5 - in cwr - backup and restore - advanced restore - restore the sd-ext and data partitions.
samsamuel said:
1 - do a cwr full backup (cwr - backup and restore - backup)
2 - flash the new rom as mentioned above, 9 times in 10 it will work fine, no data loss.
if it doesn't boot after the update
3 - in cwr do a 'wipe data factory reset'
4 - flash new rom - let it boot all the way to the android welcome screen, then reboot into cwr
5 - in cwr - backup and restore - advanced restore - restore the sd-ext and data partitions.
Click to expand...
Click to collapse
its not a new rom. Its camera and browser update. Just 3mb.
drs.dp.ua said:
its not a new rom. Its camera and browser update. Just 3mb.
Click to expand...
Click to collapse
Then follow the same steps but instead of wiping everything just flash the update file . Like in CWR choose install zip from sd card . then choose the zip which you just downloaded and flash it .
its actually really simple .
1. Boot into recovery
2. Choose "Install zip from sd card"
3. then "Choose zip from sdcard"
4. Choose the zip file which you just downloaded . the one that has the camera and browser update in it .
oh right, i see now, that option 'flash update.zip from sd' in cwm, , you don't need that one, a normal install zip from sd will do fine, without wiping anything.
samsamuel said:
oh right, i see now, that option 'flash update.zip from sd' in cwm, , you don't need that one, a normal install zip from sd will do fine, without wiping anything.
Click to expand...
Click to collapse
Yes correct . All you have to do is select the zip you wish to install .
Sent from my HTC HD2 using Tapatalk
Thank you all!
Everything turned out as you wrote.
drs.dp.ua said:
i think if i do this, i rewrite my rom and i can not boot after this.
are u sure, if this correct operation?
Click to expand...
Click to collapse
Yes it will overwrite your original wmobile rom as booting winsows mobile 6.5 from magldr is not supported yet. You can boot only to windows phone 7 or android. It will not brick your phone it is just bootloader on the top of original bootloader for hd2.
Sent from my HTC HD2 using xda premium
I am also wish to perform an update like the thread starter but I have read from the developer's thread mentioning that I need to reflash the file flash.cfg with a new partition before applying a new update. Would it clean my previous setting of the ROM if I flash a new flash.cfg? Or I still have to go through flashing the entire ROM again? I had previously flash 2 updates on my ROM and noticed a drop in performance speed. I had to do a task29 then reflash back the ROM to get the initial performance speed. Would appreciate anyone's help.
when you flash flash.cfg, you are re riting all teh partitions, so they will all be empty, so you need to do a full backup, flash the new rom, let it boot all teh way first boot, turn off, into cwm, backups and restore - advanced restore - restore sd-ext and then restore data.

Categories

Resources