Disable music tab rebuild - HD2 General

Once I have done a fresh rebuild of the "AudioManager_Eng.vol" everything works fine. But if i connect to my PC via "disk drive" mode, once disconnected I have to rebuild the library again, same applies after a soft reset.
Is there a solution to this? i.e disable rebuild.
Can anyone help? as I would like to use this, instead of another application.
So, I would like to build the library once then be able to disable it from rebuilding upon reset etc.
Many thanks

muzens said:
Once I have done a fresh rebuild of the "AudioManager_Eng.vol" everything works fine. But if i connect to my PC via "disk drive" mode, once disconnected I have to rebuild the library again, same applies after a soft reset.
Is there a solution to this? i.e disable rebuild.
Can anyone help? as I would like to use this, instead of another application.
Many thanks
Click to expand...
Click to collapse
Yeah, that would be nice! I played with some registry settings, did some tricks with the vol file but I didn't find a solution (yet). Anyone?

I have been searching high a low throughout the forum today, but nothing, let's hope someone here can help.

I have the same issue - O2 v1.43 - occasionally the library will rebuild after about 30 seconds, but often it doesn't. Sometimes I am also unable to delete the audiomanager_eng.vol file as it is in use. Restarting HTC Sense doesn't unlock the file. Doing a soft reset and trying to get to the file in File Explorer as quickly as possible in order to delete it also doesn't always work, as the file becomes locked before I can get to it. A bit annoying :-(

+1 here too

Does anyone know how to solve this?

interested too because the rebuild is often done during music playing and it's really boring

I have found a little workaround. It helped me to overcome my problems with the library load-time, maybe it will work for you guys too.
http://forum.xda-developers.com/showthread.php?t=638938
In short the workaround initiates a library rebuild at startup, so that when you eventualy tap the musictab, the library is already build. For me, this totaly fixed my problem.

appelflap said:
I have found a little workaround. It helped me to overcome my problems with the library load-time, maybe it will work for you guys too.
http://forum.xda-developers.com/showthread.php?t=638938
In short the workaround initiates a library rebuild at startup, so that when you eventualy tap the musictab, the library is already build. For me, this totaly fixed my problem.
Click to expand...
Click to collapse
= 5 smile fix for me!

Thank you very much appelflap for this little work around. . This does help, lets hope in the future this is a more permanent fix for toggling, on and off, the rebuilding of the library.
Much appreciated! Thanks!

Related

Sounds & Notifications freeze

Ok, I'm starting to think I'm crazy, because after extensive googling, and searching in this and several other forums, I haven't found anyone else with the problem I'm having. Here's the deal: every time I try to edit any settings related to notifications, my phone freezes.
I mainly see this when I try to go to the "Sounds & Notifications" panel, and try to access the "Notifications" tab, but it also happens if I try to change an individual's ringtone in my contacts, or other times.
A little background if it helps: I'm running a Cingular 8525 with the latest ROM, and the only thing I could think that might be causing any problems is FlexMail. I've got the latest beta release, and I remember reading that it does modify the tmail.exe file for some reason or other related to MAPI handling. But, I didn't have this problem when I first got FlexMail, just within the past week or so.
Has anyone else seen anything like this, or know what the problem might be?
Yes, I've searched the forum, searched everything, done any RTFM-related stuff I could think of, and tried the obvious soft resets to no avail. So please don't flame me as an idiot. I'm just a recent convert from years on a Palm OS that's trying to figure this thing out.
Well, it probably wont help you at all but FlexMail left my device nearly unusable: Freezes; standard today plugin for SMS/eMail did not work anymore; lost all my eMails (Inbox files on SD-card deleted); lost my FlexMail eMail configuration twice a week.. Then: No refund by the author. No excuses. No help. He just wanted my log files all the time. So have fun beta testing...
Still, your freeze could have another reason: check your /Windows/Rings/ directory: Any corrupted files? Open them up one by one (with the Media player) and make sure they work. Then search all your device for .wma files and make sure they are not corrupted. Would not know of any other reason right now ...
I have the solution to your problem as I was facing the same thing and no one could help me. You will notice the same not only with notifications but also in Phone, if you select options or video call options.
The problem resides in notes synchronization. I hard reset my device several times and synchronized items one by one until I discovered that when some default sounds that reside in teh documents folder (dogbark, ding, Alouette) cause this problem. Delete them and sync without them. The problem will go away.
found one..
Ding.amr
Well, sounds a little odd but I will try Thanks

Stop activesync from running

Is there any way to stop ActiveSync from running automatically on my Wing. I close it, and 5 minutes later its up again. I've searched the forum but most tricks are for phones other than the Wing. I tried some anyway (the creating a fake server..then deleting it..etc) but to no avail. It's really annoying. If anyone could offer some advice it would be GREATLY appreciated.
If it helps I'm currently running OTP v7.4 TouchFlo 2D Lite.
try setings/phone/timezone uncheck the auto check timezones and softreset this helped with it disconecting internet sharing for me im asuming you already unchecked the use usb option in active sync
ianajcxcx said:
Is there any way to stop ActiveSync from running automatically on my Wing. I close it, and 5 minutes later its up again. I've searched the forum but most tricks are for phones other than the Wing. I tried some anyway (the creating a fake server..then deleting it..etc) but to no avail. It's really annoying. If anyone could offer some advice it would be GREATLY appreciated.
If it helps I'm currently running OTP v7.4 TouchFlo 2D Lite.
Click to expand...
Click to collapse
Trust me. you might have to just deal with it. I tried the adding the fake server and disable the schedule with and without deleting that profile. I've tried disabling the time in the Phone Settings (which only certain ROMs have). I've tried using the advanced taskbar to go to notifications to terminate the repellog which had a certain description to it. And the end, activesync comes back mysteriously. Those methods were a temporary solution for me thus far.
P.S. I do not consider unchecking USB connection via Activesync since most people use it frequently especially in XDA.
Edit:
I'm also currently using Tran's 7.4 lite at the moment. I've tried the rest with same results and that's why I posted in this thread.
ianajcxcx said:
Is there any way to stop ActiveSync from running automatically on my Wing. I close it, and 5 minutes later its up again. I've searched the forum but most tricks are for phones other than the Wing. I tried some anyway (the creating a fake server..then deleting it..etc) but to no avail. It's really annoying. If anyone could offer some advice it would be GREATLY appreciated.
If it helps I'm currently running OTP v7.4 TouchFlo 2D Lite.
Click to expand...
Click to collapse
Using Total Commander (or some other File Explorer utility), navigate to /Windows/Startup. Delete repllog.lnk. This will prevent ActiveSync from starting when you turn your phone on. You'll have to run it manually if you want to sync your phone via ActiveSync, but I find this to be far less annoying.
lennyjaxn said:
Using Total Commander (or some other File Explorer utility), navigate to /Windows/Startup. Delete repllog.lnk. This will prevent ActiveSync from starting when you turn your phone on. You'll have to run it manually if you want to sync your phone via ActiveSync, but I find this to be far less annoying.
Click to expand...
Click to collapse
He's using OTP 7.4 lite. It doesn't have repllog.lnk in the Startup folder.
unknown123456 said:
He's using OTP 7.4 lite. It doesn't have repllog.lnk in the Startup folder.
Click to expand...
Click to collapse
Ah, gotcha. Didn't know that. Sorry.
unknown123456 said:
He's using OTP 7.4 lite. It doesn't have repllog.lnk in the Startup folder.
Click to expand...
Click to collapse
Active sync is automatically loaded by default in the windows system for every program you run as it stores information for when you next connect the pc via usb. You can stop this by using the software on the pc which allows you to control certain functions in activesync. Just open the program on your pc when you connect the smart phone and uncheck all the options for what you wish to sync, next time you use this you will have to manually select what you want to sync. This is mirrored on the phone each time you connect. Works with most smart phones.

Internet Explorer Fails to Start

Hi. I have a new HTC Touch 2. On the 'Start' menu, there are a number of icons / applications. They all start with one tap. Except 'Internet Explorer'. The first tap on the IE icon, takes you back to the 'Today' screen, with 'Internet Explorer' briefly being able to be seen in place of 'Start', then the words disappear. However, the programme does not run. On tapping 'Start', again, and then tapping once on the 'IE' icon (again), it runs. This happens every time I want to use IE. Why? HTC Contact Centre suggested I place IE on the 'Programs' page and try that. It was the same. they have failed to respond to my response. Is there a remedy? Cheers. Dave
Although I can't help you solve this, my phone does exactly the same as yours.
The problem also shows up in email - when you click a link, you see "Internet Explorer" very briefly in the subject line, and then have to click the link a second time.
It does seem odd that a Windows powered device is insistent on using Opera by default, but I wondered if this was because IE was problematic.
Hi, dtmark. You may well be right. I figured that someone would have encounterted this before and know the solution. Maybe it's just you and I!
Thanks
Hi. It's not a best solution but .... If you reset a phone (Start-Settings-System-Delete Memory) problem seems as solved. But you must install all apps again and before deleting you must backup your phone. It worked for me.
Thanks, Ondrej. HTC suggested a hard reset which is effectively the same as you suggest. I did that, and it caused other issues and did not fix this particular issue, so I'm a bit reluctant to try it again. Thanks, anyway.

[RESOLVED] SMS Problem?

Well I'm quite enjoying WP7...but I have a bad problem.
If I send an SMS, it does not actually send until I reboot my phone. I've done a reflash twice but it still happens. I cannot figure it out.
Anyone else had this issue?
I'm going to try one more hard reset, and test it again before doing any customising or installing of apps, see if that works. If not, will have to go back to Android....
EDIT: The problem is with Connection setup. You need to finish all your tweaks with the xboxmod xap file, and then delete custclear.provxml from /Windows if one is still there. THEN run ConnectionSetup again and it should be back to normal
Wierd Issue
No problems here.
Do you have HTC Connection Setup installed?
How did the Hard Reset Go?
Android is not the Solution.
hah, i noticed it about three hours ago too, I just posted the following elsewhere
Going back to android as of twenty minutes ago after two hours testing when it turns out that the connectionsetup process of changing the phones identity to HD7 breaks my txt messaging - welcome back the dreaded 'messages stuck in outbox untill soft reset' problem.
Lost a days work today because i assumed the client hadn't replied, he (and about a dozen other people) all got txts off me at 10.15 this evening after i soft reset.
Ive checked, double checked and tripple checked, sent and recieved about three dozen txts, changed radio, hard reset, and every time, sms works fine, instant send/recieve, but starts getting stuck after the LEO70 to HD7 registry tweak.
Shame cos i was really starting to like it.
(EDIT - downloading and running the market HTCconnection setup doesnt fix it)
As an aside, the connection setup in most androids fails with mine too, though with a different problem, so i suspect the problem may actually be with the htcsetup app, which is the base of the registry tweaking hack. But at least with android i can manually make it work.
Click to expand...
Click to collapse
Bugger!
I just did a hard reset, and without doing anything else, SMS works fine.
But as you said, this reg tweak is breaking SMS...but why isn't the problem happening with everyone?
Grrrrrrrr
Will investigate more tonight after work...
i just had a thought, but ive removed wp7 now (need it working for teh morning) but heres what ill try next (if i can find teh time to try again from scratch)
flash it, unlock it, then delete the CustClear.provxml file we moved to windows and run the real connection setup from teh market again. it didnt help for me, but i hadn't removed the CustClear.provxml file, so it would have been installed again (perhaps? dunno, but worth thalf an hour to check out, ,, if only i didnt have a real life, , , , hehe)
good luck.
samsamuel said:
i just had a thought, but ive removed wp7 now (need it working for teh morning) but heres what ill try next (if i can find teh time to try again from scratch)
flash it, unlock it, then delete the CustClear.provxml file we moved to windows and run the real connection setup from teh market again. it didnt help for me, but i hadn't removed the CustClear.provxml file, so it would have been installed again (perhaps? dunno, but worth thalf an hour to check out, ,, if only i didnt have a real life, , , , hehe)
good luck.
Click to expand...
Click to collapse
Great minds think alike...I also just thought of that while having lunch!
I'll try it in a little while...
Ok, initial testing confirms that it works!
samsamuel said:
i just had a thought, but ive removed wp7 now (need it working for teh morning) but heres what ill try next (if i can find teh time to try again from scratch)
flash it, unlock it, then delete the CustClear.provxml file we moved to windows and run the real connection setup from teh market again. it didnt help for me, but i hadn't removed the CustClear.provxml file, so it would have been installed again (perhaps? dunno, but worth thalf an hour to check out, ,, if only i didnt have a real life, , , , hehe)
good luck.
Click to expand...
Click to collapse
This problem seems to be similar to mine
http://forum.xda-developers.com/showthread.php?t=918059
I'il try your solution, thanks!
SMS Issues
This is what seems to work for me, after countless days and minutes contemplating throwing my phone because of windows 7, I love it, very simple and straight to the point.
1) go to settings and put in your carriers apn - or connect through wi-fi
2) Log in with your live id from MS.
3) because of the restrictions we can't download from marketplace I could be wrong so use Tom XAP to install apps.
***what i've notice is when i deploy "XBMODDeployer.xap" and "Connection Setup.xap" that is when i started having mms issues where I would have to reset to get text messages that i send out to send. I can still receive texts but it won't send till i reset my phone.***
So my suggestion is to to all the settings to get it working except don't deploy those to XAP mentioned above.
I hope this helps anyone.
mittadam said:
This is what seems to work for me, after countless days and minutes contemplating throwing my phone because of windows 7, I love it, very simple and straight to the point.
1) go to settings and put in your carriers apn - or connect through wi-fi
2) Log in with your live id from MS.
3) because of the restrictions we can't download from marketplace I could be wrong so use Tom XAP to install apps.
***what i've notice is when i deploy "XBMODDeployer.xap" and "Connection Setup.xap" that is when i started having mms issues where I would have to reset to get text messages that i send out to send. I can still receive texts but it won't send till i reset my phone.***
So my suggestion is to to all the settings to get it working except don't deploy those to XAP mentioned above.
I hope this helps anyone.
Click to expand...
Click to collapse
We've already found the solution. I'll update my first post.
All you need to do is run connection setup again, after deleting the custclear.provxml from /Windows
Good to know it was that simple. I'll have another play next day off.

[Q] There's a problem with PC settings. Should I refresh my PC?

I upgraded my Windows 7 PC to Windows 8 (read: not a clean install) a few nights ago. Everything worked great, until recently. I changed the setting in PC settings to make everything appear larger. Now when I choose "Change PC settings" from the settings charm, I get the message: "This app can't open. There's a problem with PC settings. Refreshing your PC might help fix it."
Everything else seems to be working fine, but I am now stuck with a huge interface and no way to get into the PC settings. I have tried all of the obvious things (searching google/xda, restarting the PC, power off and on, etc.) As I understand it, performing a refresh will keep my Windows 8 apps, but will wipe out all my desktop programs. Am I correct in this? I really would like to avoid this, as I have a lot of programs installed, some of which I have lost the discs/installers for. What do you guys think?
EDIT: Now that I think about it, this also means I don't have access to many other important items such as Windows Update and user accounts.
mcimo88 said:
I upgraded my Windows 7 PC to Windows 8 (read: not a clean install) a few nights ago. Everything worked great, until recently. I changed the setting in PC settings to make everything appear larger. Now when I choose "Change PC settings" from the settings charm, I get the message: "This app can't open. There's a problem with PC settings. Refreshing your PC might help fix it."
Everything else seems to be working fine, but I am now stuck with a huge interface and no way to get into the PC settings. I have tried all of the obvious things (searching google/xda, restarting the PC, power off and on, etc.) As I understand it, performing a refresh will keep my Windows 8 apps, but will wipe out all my desktop programs. Am I correct in this? I really would like to avoid this, as I have a lot of programs installed, some of which I have lost the discs/installers for. What do you guys think?
EDIT: Now that I think about it, this also means I don't have access to many other important items such as Windows Update and user accounts.
Click to expand...
Click to collapse
Correct me if I am wrong but if you can get to the modurn settings to do a refresh then you should be able to do an advanced boot. I thnk there is a repaire install there that will not wipe out your programs. That said if you find something as wimple as setting to make things bigger has done this there could be a host of bugs but it may be worth trying to find the registry entry for this and changing it back to see if it fixes the problem. Not sure where it is but google is good here - always backup the registry before making changes.
lumpaywk said:
Correct me if I am wrong but if you can get to the modurn settings to do a refresh then you should be able to do an advanced boot. I thnk there is a repaire install there that will not wipe out your programs. That said if you find something as wimple as setting to make things bigger has done this there could be a host of bugs but it may be worth trying to find the registry entry for this and changing it back to see if it fixes the problem. Not sure where it is but google is good here - always backup the registry before making changes.
Click to expand...
Click to collapse
Thanks a lot friend! I'll take a look when I get home.
Sent from my Galaxy Nexus using Tapatalk 2
EDIT: Well, I just checked my PC and apparently the problem resolved itself. Hopefully it will stay that way!

Categories

Resources