AT&T 3G Settings: Please Disclose What Works For You - HD2 General

Hello list,
I have only been on this forum for a couple of days now but I have read a lot so I'm becoming educated very quickly. I cant however, get the voicemail to work on my Telstra HD2. Other members report that their phones work flawlessly on AT&T 3G but I have not seen anyone post what "actual" settings they are using. For example, on the phone tab if you click menu/options/voicemail and text message, there are two boxes that should have numbers in there. Both numbers listed on my phone are international numbers. I have flashed my phone with WWE 1.66 and when I installed my AT&T sim card the phone recognized it. I still cant check my voicemail though because the international numbers are still there. Also, I can send SMS but not MMS.
(I live in Orlando, Fl and the entire area runs on the 850 frequency.)
Please post what settings are working best for you.

You can put your own phone number for voicemail and it should work fine...
Text message center you're on your own

Putting my phone number in doesnt work. I've tried it. Do you have a Telstra phone? If so, can you MMS people?

Works for me, but I'm on the old ATT I guess.
I do have a Telstra phone. I've never used MMS, sorry! Try asking in the T9193 reference thread

Ok, will do. Thanks.

Related

Cannot send SMS in EDGE; WCDMA OK.

I can not send SMS when in GPRS/EDGE areas - receive is OK. When in WCDMA (3G) areas, SMS works fine. Has anyone else experienced this and perhaps found a solution?
Hi!
I also have problems with SMS sending. More or less with any network I am in. Usually I can only send one to two SMSes, then I need to reboot to be able to send/receive again. SMS just hangs for a moment in Outbox, then an error message is displayed, network connection drops and then reestablish, SMS is put in Draft. VERY annoying!
TomazL
Had the SMS sending problem (send 1 or 2, then had to reboot or rest went to drafts) when I first bought my phone e last year.
My problem? Old outdated SIM card. Went to dealer and they gave me a new one. Problem solved!
I did change SIM four times in the past 10 days. From the latest to the oldest my mobile operator has to offer. To no avail. Strange thing is that I have tested some SIM cards I could get my hand on (my father's for example) and two of them did not have this problem.
What could be the issue with SIM card? Why some are "outdated"?
Good question. I'm a pretty techy guy, but I know little about SIM cards.
I asked 5 techs who seem just as clueless. They said:
1. Newer SIM cards have More towers listed (doubtful)
2. Some SIM cards aren't compatible with 3G phones (maybe)
3. SIM contacts are dirty (no)
4. SIM might be overheating (no)
5. Some SIMs draw more current in certain network modes (doubtful)
I bet it IS your SIM. Ask if they have a 3G-compliant SIM. T-Mobile USA has no 3G yet but their SIMs are supposedly compatible. Who knows
Thanks for all the replies! I tried a friends new SIM and it doesn't work either, so I know it's not that. Re-booting doesn't help either. I am on the T-Mobile network and it works as soon as I am in their 3G area. It used to work on GSM until I upgraded to the official GPS update ROM and then it hung a few times and last week stopped sending altogether. It gives me a message that it is unable to send and moves the SMS to the drafts folder. Receive is OK. Is it possible that the radio (1.38) has become corrupted and maybe a new version (1.41) will solve this?
Re-booting only helps in sending one to two SMSes after reboot (and receiving queued ones). Otherwise I have just the same behaviour as you describe. I have also noticed that until I tap on OK on SMS error message, I am not available for incoming calls either! Do you also notice that after SMS error message network drops and reconnects? I have tried some friend's/family SIMs and majority did not work, two of them did. I don't know why. Where will 1.41 version of radio be available? Is it official?
Soj said:
Re-booting only helps in sending one to two SMSes after reboot (and receiving queued ones). Otherwise I have just the same behaviour as you describe. I have also noticed that until I tap on OK on SMS error message, I am not available for incoming calls either! Do you also notice that after SMS error message network drops and reconnects? I have tried some friend's/family SIMs and majority did not work, two of them did. I don't know why. Where will 1.41 version of radio be available? Is it official?
Click to expand...
Click to collapse
Here's the link to the radio upgrade: http://www.file-upload.net/download-...-SPL-.rar.html
I haven't tried this yet, so I don't know if it will help.
Hi! Link is broken!?
Soj
Soj said:
Hi! Link is broken!?
Soj
Click to expand...
Click to collapse
Here is the link to the thread - the download options are on the first page:
http://forum.xda-developers.com/showthread.php?t=304006
PGMMA said:
I can not send SMS when in GPRS/EDGE areas - receive is OK. When in WCDMA (3G) areas, SMS works fine. Has anyone else experienced this and perhaps found a solution?
Click to expand...
Click to collapse
I definately notice this problem as well. Always when the message is 2 SMS long... never can send. Perhaps it is the same problem as when the call is ended as soon as it is dialed, I read on one thread that the phone has trouble when switching to a 3g tower or not... I have a brand new ATT sim (cingular customer) in the Wash. DC area and I still have problems sending large SMS... sometimes reboot fixes but most times not... been searching also... I'm going to try to choose GSM only and vice versa to see if that makes any difference... the only other option for SMS is "Use unicode when necessary" does anyone know if that would fix?
Micah
I have now received fifth replacement SIM (looks like a very old and used one) from my mobile operator here in Slovenia, Europe. SMS sending and receiving now works like a charm! Strange that some SIMs work for no obvoius reason.
TomazL
mook2420 said:
I definately notice this problem as well. Always when the message is 2 SMS long... never can send. Perhaps it is the same problem as when the call is ended as soon as it is dialed, I read on one thread that the phone has trouble when switching to a 3g tower or not... I have a brand new ATT sim (cingular customer) in the Wash. DC area and I still have problems sending large SMS... sometimes reboot fixes but most times not... been searching also... I'm going to try to choose GSM only and vice versa to see if that makes any difference... the only other option for SMS is "Use unicode when necessary" does anyone know if that would fix?
Micah
Click to expand...
Click to collapse
The phone has no problem switching between GSM and 3G (WCDMA) and in fact SMS works perfectly in 3G covered areas. I cannot send even a one word test, let alone a large message in my GSM area. I recently noticed that I can send SMS in some areas and not in others. Of course, I live in an area where I cannot send. What's weird is that it used to work. It may be that T-Mobile updated the network in some areas and that this is not compatible with Windows Mobile phones. My Sony Ericsson and Nokia phones still work. I'm hoping that when WM6 (official or at least Dopod) comes out, SMS will work properly again.

Unable to make or receive calls

I wonder if anyone can help with a fault on my M3100. So far I've searched this website for answers with no luck. I have Hard Reset the phone, upgraded the Radio, all without any luck.
About 6 days ago my M3100 suddenly stopped being able to make or receive calls. Whenever I try to dial out the call drops out before being established, and if I try to call in to the phone the caller receives a series of beeps.
At first it seems to be a SIM problem, but the Vodaphone SIM is fine in any other phone. If I put my Orange SIM in the phone it just comes up as "No Service".
I'm at the end of the line in what to do and it doesn't seems to make any sense.
Any comments, suggestions, advice or help very much appreciated.
..... Further symptom details:
I can send and receive text message with my Vodaphone SIM installed and access WiFi and GPRS networks. Orange SIM won't connect at all! Both SIMS work fine in a standard phone ! Only clue I can think of here is that the Vodaphone SIM is UMPTS and GSM where the Orange is GSM only. The spare phone I tested them in was GSM only.
Could the GSM part of the M3100 be stuffed ?
I'm stumped for the time being!! It doesn't seem to make any logical sense. Maybe any of you who know the in's and out's of how the device communicates might find some clues in that...
Heeeeelp !
More details..
I've just added a few more details on the symtoms.. maybe the few extra clues might yeild some thoughts from someone !
Have you checked the band selection in Settings > Phone?
Is it possible that the phone could have become blacklisted? How long have you had it? How did you buy it? (This is probably NOT it, since the text still works.)
Have you tried a tweaker to enable HSPDA?
Had the phone for over 12 months so Blacklisted shouldn't be the issue. I've tried all the band selections including Auto but no luck.
Haven't tried the Tweaker... do you have any details on that...
Up until it suddenly stopped working it worked on all networks..
Another possible clue is that I was "Roaming" in France for a month and it was there that I made my last successful call. I have UK SIMS... I have an Australian SIM which I'll try now to see if that makes any difference..
Tried an Australian SIM roaming in the UK ! The service connects on two available networks,Vodaphone and TMobile but not on Orange and O2 (like with the Orange UK SIM). Same fault as the before with the networks it will connect to.
This seems to eliminate the SIM or Network being the fault and isolate the fault to the Device...
probably not the issues, but worth a try?
I live in a very strong 3G + HSPDA ares, but cant make or recieve anycalls tho texts work on T-mobile, i need to have my phone in 2G mode, and calls work fine???
If i leave my house and go a few miles 3G works as it should able to call and recieve etc!
Can't seem to work out how to force the phone onto 2G or 3G ... if anyone can advise I'll give that a try!
I have had very similar problems to this.
Please see my post:
http://forum.xda-developers.com/showthread.php?t=325149
I do think this is some sort of network problem as after I posted the issues in the thread above, I left home and travelled about 6 miles and the signal came back and the phone worked fine.
Today, I have been able to make and receice calls but all of a sudden I got cut off from a call then could not make or receive calls (incoming goes straight to voicemail).
I can however use my Orange SIM without problem and both Vodafone and Orange SIMs work fine in other phones.
stevegardner said:
Can't seem to work out how to force the phone onto 2G or 3G ... if anyone can advise I'll give that a try!
Click to expand...
Click to collapse
im running schaps 3.57a rom and in my Comm Manager, its at the bottom on his 12 button one, where you can turn on/off, wlan, bt, flightmode, direct push etc
stevegardner said:
Can't seem to work out how to force the phone onto 2G or 3G ... if anyone can advise I'll give that a try!
Click to expand...
Click to collapse
You can also go into Settings > Phone > Band.
If the band tab does not appear (to the right of the network tab), then you may need to do a registry tweak.
From the very helpful wiki:
Enable/Disable GSM/UMTS Band Selection
Cingular kindly disables anything useful about the network on the 8525. To enable the Band Selection Tab on your Phone settings page, set the following:
[\HKLM\Software\OEM\PhoneSetting\]
"ShowUMTSBandPage"=dword:00000001
To disable, simply clear the value to 0:
[\HKLM\Software\OEM\PhoneSetting\]
"ShowUMTSBandPage"=dword:00000000
Click to expand...
Click to collapse
Have travelled outside England again this week and... well the phone works fine roaming on my UK Vodaphone SIM. Seems very ODD.. only thing I can put any logic to is a problem with the GSM part of the phone. It's working here in Stockholm on the 3G network no problem.
Anyone advise how I force the phone to be on GSM and 3G so I can test this theory. The BAND settings under SETTINGS>PHONE don't seem to give you this control over how it connects..
Hey i got the same problem anyone solved it yet!
Hi Sunnyb1
Since my last post I returned to England where the phone was useless. No SIM cards would work, some would not register at all but my Vodaphone SIM seemed to register but as before it would not receive calls, nor could I make calls out.
Now I'm in Australia with an Australian SIM card. NO PROBLEMS AT ALL !!
The phone works just fine !!
It's a mystery indeed...
Without any knowledge of the ins & Outs of how a SIM card / Network / and the phone work together it's impossible for me to arrive at any conclusive logic.
Hopefully someone might stand up to the plate and offer some explanation !
Anyone from HTC out there ??????
Steve
stevegardner said:
Hi Sunnyb1
Since my last post I returned to England where the phone was useless. No SIM cards would work, some would not register at all but my Vodaphone SIM seemed to register but as before it would not receive calls, nor could I make calls out.
Now I'm in Australia with an Australian SIM card. NO PROBLEMS AT ALL !!
The phone works just fine !!
It's a mystery indeed...
Without any knowledge of the ins & Outs of how a SIM card / Network / and the phone work together it's impossible for me to arrive at any conclusive logic.
Hopefully someone might stand up to the plate and offer some explanation !
Anyone from HTC out there ??????
Steve
Click to expand...
Click to collapse
I got the phone and it was working perfectly on Orange then i tried unlocking it and ever since it has come up with "NO Service" like you everytime i put a Orange Sim in the phone it does not show up.. but when i put a Vodafone sim it works perfectly i tried reflashing the radio's many times
I unlocked this particular phone 6months before this problem showed up so I don't think the Unlock on it's own is the cause. What's particularly baffling is that a SIM may not work with the phone in one country.. but in another it works fine.
..... another country that is !
Hey Steve i have found out what the problem is after hours of research
I found this of another website
Orange & O2:
If you place an active orange or
O2 sim into a blacklisted handset you
phone will not show any signal strength
at all! If the handset is a Nokia then a
"SIM card registration failed" message
will also be displayed. If your handset is an
Ericsson then an "Invalid Mobile" message
will be displayed. For most other manufacturers
the handset will simply show no signal!
Vodafone & T-Mobile
If you place an active Vodafone or T-Mobile sim into a blacklisted handset, the phone will appear to function perfectly UNTIL you try to make an outgoing call. When you try to call out from the handset you will hear a sequence of beeps and then the call will be dropped!!
........
This means the handset you got is stolen or someone has blacklisted it ... i got mine of EBAY! and reading that i figured that it is stolen
It wont work in the UK but it will work everywhere else in the world
Mmmm... that's interesting Sunnyb1. If my phone is blacklisted then happened in JULY this year which was 8 months after I bought the phone. I bought the phone legit .
Can anyone advise what the "Blacklisting" process is.. I assume its done by using the IMEI number.
Who is the rightful owner of a handset and can any phone be blacklisted by anyone, and possibly by mistake ?
Would unlocking the phone from Orange cause a phone to be blacklisted ??
How can you "Un-blacklist" a phone.
Answered my own question here......
This website seems to have the answers
http://www.unlockme.co.uk/blacklist.html
OK... still on this thread. Can anyone advise how you find out which network in the UK has blocked your an IMEI number. I gather any of the UK networks can block any IMEI and it's not unknown for errors to be made. But only the network that blocks the IMEI can Unblock it.
Thought I'd post this before waiting forever for some call centre dimwit to give me the runaround.
Thanks...

Unable to recieve sms picture

I am just wondering on your opinion of what could be the cause of not getting an SMS picture someone sent me. In my last phones I would get a bunch of garbled text so at least I know it attempted to receive it.
I am able to send out SMS pictures and the same person is able to receive them.
suggestions?
Is your friend with a different network provider?
I have a similar issue, that a friend of mine with a different provider cant send me pic messages. They send, but i never get them.
I am with bell and they are with telus
hah, what a coincidence. exactly the same situation here.
i was able to receive pic messages from this same person with my 2 previous bell phones, but the sgs is the first one on the 'new' network, with the sim card and all.
tried it with 2 other people, one (on rogers, with an iphone 3g) couldn't send me a pic, another (also on rogers, but with a blackberry) was able to send me a pic.
telus = rogers
thats gotta be the difference. still unsure as to how to fix the situation though.....its extremely frustrating.
same situation... called tech support, they arent any help. I can send pics to my friend on Tmobile USA from Bell, but I dont get their pics on my vibrant . They have a vibrant as well so it should be working. Gotta be the networks fault.
yeah, i can get pics from a friend on koodo. that person is acting like a pic forwarder now hahaha....and i can send pics to the telus friend too.
anyone found any other info on the web about this? it cant be all that uncommon....?
I can't help, but I can add that I too have had problems receiving SMS messages from someone on a different network. In my case it's from a Fido iPhone user, while I too am with Bell Canada. The Bell rep I spoke to was able to send me a lovely picture of his keyboard without any problems.
Isn't fido part of rogers too? Maybe its a general rogers >> bell thing....
Is this just with the galaxy? Or have you had it work (gotten pictures from that particular contact) with previous phones?
What i cant figure out is that if the problem is with the network itself, shouldn't there be relatively easily-found reports of it elsewhere? I can find no such reports.....
Surfed the internet, and tried a whole bunch of different settings again, and still no dice. Still works from Koodo, but nothing from any rogers variant.
Highly ticked. Probably give bell a call monday, see what they say.
I was able to receive pictures on my old phone (Moto Razr2) although the last time was quite a while back (over a year). Perhaps Rogers changed something in the interim that broke it. Unfortunately I haven't anyone to further test this with.

BELL LG Quantum owners!!! Help please

I had a Bell LG Quantum, but always had my heart set on a Focus. Now i have one and am having some issues with the profile setting on the bell network.
If someone won't mind, could you please either take a photo(preferred, more info) or post info from the following:
1.Go to the phone app
2.Dial ##634# and click Send
3.When prompted for a password type 277634#*#
4.You should now be at "Factory Menu"
5.Choose "Engineer Menu"
6.Choose "Other Setting"
7.Choose "view current profile"
In particular, i'm looking for which of the following APN is listed in the phone,
pda.bell.ca
or
inet.bell.ca
if you see either please let me know, and what it's listed beside,
Thanks so much.
from what I can read - what tiny print - it's referring to pda.bell.ca
it for sure pda.bell.ca just checked it now. I have a question, I bought this phone as an "unlocked" bell phone but I am a rogers customer. The phone functionality is working but I cannot get the data (3g) to work. What should I do, I assume I have to change this very setting. Please help!
Let me know if you need other information or the entire xml.
EDIT: I found a solution for making the Rogers data work.
Got into the above mentioned menu:
1) turned ADP on.
2) remove pda.bell.ca replaced it with internet.com
3g seems to work fine now !
However I don't get callerID from Bell customers anymore. Isn't that funny? What should I change to have caller id functional again?
danix said:
However I don't get callerID from Bell customers anymore. Isn't that funny? What should I change to have caller id functional again?
Click to expand...
Click to collapse
Aha!! Someone else with the same problem! Finally!
I, too, have an unlocked Quantum, but mine's from AT&T and I have the same problem with inconsistent callerID's coming through. I'm pretty sure it's not a problem with your phone though, since I also have an HTC Surround unlocked from Telus (now on Rogers) that has the same problem. And it's nothing wrong with your SIM card, since I guarantee putting that SIM in another, non-WP7 phone will have your caller-id working perfectly.
I haven't found any 'setting' to get this working, and as I say, it's inconsistent, with some landline phones working -- some not, some cell phones working -- most not. I'm still trying to chase this one down.
I think the call display function has something to do with name display. I believe I remember reading this in another thread somewhere.
I don't have name display on my account and I have 0 issues with caller ID
I'm using an unlocked AT&T Quantum.
Zaslav said:
I think the call display function has something to do with name display. I believe I remember reading this in another thread somewhere.
I don't have name display on my account and I have 0 issues with caller ID
I'm using an unlocked AT&T Quantum.
Click to expand...
Click to collapse
Hmmmm, interesting.. I'll have to check on my account and see if I have Name Display.
When someone calls you, what do you see? Just the number of the caller?
Thanks.
If I don't have the number saved it shows the number.
By the way has anyone gotten mms to work?
I've tried googling and searching xda but can't seem to get it to work.
I have this same issue
Zaslav said:
If I don't have the number saved it shows the number.
By the way has anyone gotten mms to work?
I've tried googling and searching xda but can't seem to get it to work.
Click to expand...
Click to collapse
My unlocked AT&T Quantum phone only uses 3G with Rogers and my sms times when received are always coming in with the incorrect time. I looked at the Bell unlocked Quantum and it has a different model# and firmware version, which makes me frustrated seeing as my friend's works fine with everything. What's the point of an unlocked phone if it can't use HSPA on another network? Is it possible to flash the phone to the Bell's firmware? I feel defeated

Need help. Unlocked in Australia - No SMS

So I've been searching and searching but haven't been able to find a solution.
I called Sprint before I left and they actually unlocked my phone without any issues.
Got to Australia and got a SIM card.
Changed my Network Mode to Global (GSM + CDMA)
everything seemed to be working but SMS will not send. When I receive SMS they always have +61.
So I dug a little deeper and noticed in About - Status my phone number is still my old number from the states. As is my MIN number.
Forgot to mention I'm on CM10.1.
Someone help me please!
Service code? reflash TW ROM and update profile?
What's my move here guys? I've been messing around for hours and getting no where.

Categories

Resources