Hi everybody,
Call me stupid if you like but....
I have a HTC Magic from Belgian telecomservice Proximus.
Some days ago I did the following.
- deleted all files from SD-card
- wrote down following:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.33.2005 (SAPP 10000)
CPLD-12
RADIO-3.22.20.17
Apr 20 2009, 15:30:43
- ran the RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe
- RUU said: cannot find customer-ID
On this point my mobile was stuck on the RUU / USB screen
- I ran RUU_Sapphire_HTC_Europe_3.04.401.2_HTC_AT_test_signed_NoDriver
- RUU said: cannot find customer-ID
now my mobile says:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Dec 8 2009, 17:38:48
Now I think (I'm a noob) my mobile is semi-bricked.
I tried to make a Goldcard, but couldnt because I cannot run adb.
I can run fastboot from AndroidSDK/tools
adb doesnt find devices.. fastboot finds my device.
Anyone who can help me? I would be really thankfull.
Ouch ouch, looks like its more than semi bricked for now. Since it updated your spl to a perfected one there isn't hacked yet. I'm afraid that the only thing there might save this phone is running another RUU your mobile will accept. You have to find one which got 1.76.0009 or higher cause the S=ON now
If this wont work the only hope will be a spl hack will be released and will be done through fastboot.
But most of all it sounds like the best thing there could happen is that your warranty is still valid and they will replace it for you.
Anyway, don't take my words as 100% cause i'm no expert on this matter!!!
If you dare to try to flash another spl/radio through fastboot look at this: http://forum.xda-developers.com/showthread.php?t=605239
BUT, as your new spl is perfected it will most probably not work and ruin the possibility to use fastboot.
Maybe and just maybe, it will be easier to get a replacement if it's fully bricked and it's impossible to get into fastboot and recovery.
Thanks already for the fast answer.
Let me try your suggestions first.
Warranty will not be provided I assume.
I tried to reflash, I couldn't... Let's jst go to the shop and send it to repair-service.
Thanks for helping Ronni!!
radjagios said:
I tried to reflash, I couldn't... Let's jst go to the shop and send it to repair-service.
Thanks for helping Ronni!!
Click to expand...
Click to collapse
Try to wait a little while, like i wrote i'm not an expert on this matter.
Maybe if you're lucky someone will drop by with a solution for it. But to be honest, i wouldn't keep my hopes up
And sorry didn't follow the thread, don't have any links for RUU cause i'm not really sure which you should use.
But if Belgium got the update which include HTC sense, i guess that would be the right one.
I found a solution to my problem.
Here's what did I do.
hxxp://forum.xda-developers.com/showthread.php?t=656798
Got the exact same issue.
Tried the goldcard with the sandisk 2GB, but with an usb adapter. (I read the card should work)
I could do everything in the goldcard tutorial but when inserting the goldcard in the phone nothing happens at boot or when pressing the recovery keys at boot.
It jumps right away to versions screen.
The strange thing is though. Once I inserted the sd card in the phone, I can no longer use it on the PC (please insert media). Which I could do before.
When inserting the sdcard on another magic phone, it's working fine.
Going to get a Kingstong 2GB with sdcard adapter in the mean time and try it in the pc's card reader.
(HTC Magic 32A)
It really sucks Proximus sells android phones you cannot update. What's the use to have open source software then?
I also wander why the RUU update went wrong, once you root the phone is should work no ?
hmmm, I Read on this forum there is no fix for the 1.76.0009
h**p://forum.xda-developers.com/showthread.php?t=548218&page=27
radjagios, can you confirm the goldcard is working for this?
You have any useful info like sappimg version you have put on it?
It is not boot with "HTC Magic" text on black background and stalled at all. And, I even can not boot it in recover (using HOME+POWER) or in HBOOT (using BACK+POWER) ...
It happened after I flash it with a Google ION radio image following the guide found in http://developer.htc.com/google-io-device.html#s1.
My phone was (before):
----------------------------
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP*****)
CPLD-10
RADIO-3.22.20.17
Jun 2 2009, 17:27:03
----------------------------
What I did exactly is below:
1. 'adb push' the radio image (ota-radio-2_22_19_26I.zip) into the /sdcard/update.zip
2. In Amon_RA's recovery tool, flashed the /sdcard/update.zip. When got the prompt I reboot the phone using menu.
3. It seems rebooted but stay in another strange screen that I never saw: that is an open box, beside that stands a green adroid robot.
4. I feel the screen stay too long and seemed halt, then I removed the battery and try to boot again.
From now on, in whatevery method, I can only get a dead screen with "HTC Magic" white text on a whole dark screen.
Can I save my phone? I am crying .... What's wrong in my steps?
HELP!
It's dead fo' shizzle.
I assume it was a Rogers Magic (32A)? I know the SPL says it'd 32B, but I've seen people flash all kinds of crap and end up with hboot showing the wrong board, and I'm pretty sure that's a 32A radio you're running. You flashed a radio image for 32B to a 32A phone... you shouldn't have done that.
Actually I also suspect if it is really a 32B as HBOOT said, since in a recovery flashing process I found Amon_RA's 32A version works but 32B does not. I posted the question in http://forum.xda-developers.com/showthread.php?t=750307, but no one reply to me! If you saw the thread and see something earlier, my phone can be saved
So, my question is, is there no any solution to recovery my phone any more?
I was looking for sense roms for my mytouch 3g 1.2 and found one that required the radio to be updated to 6.35 ( i double and triple checked to make sure the steps and procedures were specifically for the mytouch with the 32a board ) but after I followed the directions, my phone became unresponsive. It stayed at the HTC Magic screen for about an hour before I turned my phone off and back on again to undo what I had done ( using previous experience from a screw-up I did several months back...basically using the goldcard method to re-root my phone as if it were "new" again ). My problem is, now it's more unresponsive than it was before. it pauses at system - unzipping every time i try to use hboot to load the sappimg.zip. right now my current stats are:
SAPPHIRE UNKNOWN 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
May 8 2009,21:02:32
and loads up a red vodafone bootscreen. i honestly think my problem was accidentally pressing the wrong link on Amon_RA's thread about perfected SPL, and i didn't realize it until it was too late... I cannot flash anything thru fastboot, hboot basically stops at system - unzipping when trying to run the sappimg.zip, and "fastboot boot recovery.img" loads the red vodafone screen, but doesn't flash boot the recovery so i can try and fix it with recovery...
all i need to know is if it's entirely bricked, or if i can still save it, and if so, a little nudge in the right direction would be much appreciated...i have been searching google, xda-developers, cyanogenmod, androidforums, etc. for the past 3 days and cannot, for the life of me, find out how to fix the issue...
EDIT: as always, when i ask for help, i end up fixing it somehow...
Magic stuck on "htc magic" boot screen after Engineering SPL... and bad Nandroid, ugh
Please help, I'm stuck on a boot screen, compounded by an apparently bad Nandroid backup
I just got a Rogers Magic so I can get 3G on AT&T. (couldn't with my T-mo G1) Rooted it, installed the RA-Sapphire recovery and took two Nandroid backups (one with, one without Ext)
Here was my starting point:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT- 1.76.0010 (SAPP50000)
CPLD-12
RADIO- 6.35.10.18
Plan was to install Cyanogen 6.1.0 (like my G1). This requires that I downgrade the radio, and I was planning on using RadioSwitcher tool to make life simpler.
The tool requires an engineering SPL be installed, and points to this Magic SPL Hboot collection thread
I've downloaded and/or tried (in this order):
Stock: 1.76.0010 (as noted above)
Engineering SPL 1.33.2010 (from the SPL collection thread the tool instructions pointed to)
1.76.2007 SPL (from the Cyanogen Wiki on Magic 32A with 6.35 radio)
Engineering SPL 1.33.2009 (from the SPL collection thread the tool instructions are pointed to)
So when I tried using the tool to switch the radio to a Radio_HTC_PVT_32A_3.22.20.17 [supplied], I got these results:
Stock 1.76.0010 - tool won't update radio without an engineering SPL. Device boots up no problem.
Engineering 1.33.2010 - tool uses Fastboot, I see progress bar, then screen goes black and tool reports "Radio update: FAILURE". Device now won't boot, hangs on "htc magic" boot screen.
Tried to restore - Nandroid restore issue noted below.
Engineering 1.76.2007 - same progress bar/black screen, update "FAILURE", and device won't boot.
Engineering 1.33.2009 - same progress bar/black screen, update "FAILURE", and device won't boot.
(I tried posting on that Radioswitcher thread but it's locked or closed or I'm just not able to post on it.)
I don't feel comfortable randomly trying SPL's, especially as I'm guessing there's simply a lack of understanding on my part as to which SPL is compatible with my current phone/radio. I'm hoping someone here can help with that.
Currently, this is how the phone sits:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT- 1.33.2009 (SAPP50000)
CPLD-12
RADIO- 6.35.10.18
...not able to boot, not able to restore:
I can get into recovery, but it's also testing me:
When I try to flash anything from SD, I get "E: can't mount SDCARD:" If I select "USB-MS Toggle" then disable it and come back, then it appears to work - but doesn't give me warm and fuzzies.
Nandroid restore - either backup gives "Error: run 'nandroid-mobile.sh restore' via adb!"
That really makes me uncomfortable and puts me a bit out of my comfort zone - I was counting on the Nandroid backup as my safety net... never had any issues with my G1 and Clockworkmod recovery. :huh:
Thankfully, I have the trusty G1 I can plug my SIM card into to use as a phone...
But I really need to get this working or it's a lot of money, and hopes, down the drain.
Help - please!
I used this guide to root my phone to begin with - I see there's an engineering SPL option in there also.
Although I said I wasn't going to try pot-shot SPL attempts, this was part of the rooting process I followed originally, and someone suggested that I try that one.
I can't boot my phone so I couldn't follow that process exactly, but I extracted the SPL file from that zip file and put it on the SD card using my PC, then booted into recovery to flash that Eng SPL...
...and still the Magic won't boot up. I can't tell if this is even any different than the previous SPL - or rather if the problem preventing boot is a problem, if it's tied to the SPL (numerous SPL-swaps would seem to indicate no?) and if it's different.
Now I'm here:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT- 1.76.2007 (SAPP50000)
CPLD-12
RADIO- 6.35.10.18
Stop...you have an eng spl... Thats all what you need!
You are working the BLIND...
For every spl there are matching radios...
For the 1.76.2007 spl, you can use any 6.35 radio for magic.
For the 1.33.20xx(xx can be 04,05,10) you can use 3.22 radios.
All the above are eng spl, which basically gives extends read/write permissions.
With the eng you can flash what ever partition you want, e.g. system, radio or recovery.
The reason you can't boot is that you have **** up your system.... That we can fix easy :0)
Radio/spl **** ups -> not to so easy to fix.
You have a good combo now, let's get you a good system.
First, you need to flash a different recovery to make sure it works with the 6.35 radio.
Download my fastboot commander tool (magic version, check my signature) and it will do it for you the easy way.
When you have the tool, go to magic 32A tab.
There you can find two buttons, one for 6.35 radio combo a.k.a new radio.
You also find one for 3.22 radio a.k.a. old radio.
The tool will flash an entire combo of radio, spl and recovery that matches :0)
so... this what you have to do, choose 1 and only 1:
1) use the tool to flash "new" combo, reboot into recovery and flash any rom that is for the new radio (6.35). Check out the development sections for roms.
2) use the tool to flash "old" combo, reboot into recovery and flash any rom that is for the old radio (3.22). E.g. cyanogenmod from this page:
http://wiki.cyanogenmod.com/index.php?title=Latest_version#MagicCM6
Remember to flash the EBI 1 kernel or else the system will not boot.
The gapps (at the buttom of the page) are optional but recommend :0)
Good luck, and stop working the BLIND!
Sounds good...
Should I expect that after flashing the "old" images, that I'd be able to boot my phone into the stock OS again (1.5 with Sense)?
Or should I just skip that [if that's not a good test] and just proceed with loading the Cyanogen ROM?
Very much appreciated, and thanks again.
Also, one thing I'm concerned with - I've seen some notes along the way that the Magic requires a custom Kernel to install Cyanogen... I'm not sure what the Kernel really even is. Do you have any insight into that?
http://wiki.cyanogenmod.com/index.php?title=How_to_build_a_kernel_port_for_CM6
I've got the 32A - but those instructions are hardly 'download this file and flash':
"If you want to build a EBI1 kernel port package to get it to run on a 32A Magic (with 288 MB total RAM), or a phone with the 3.xxx radio such as the Rogers 32A Magic and Rogers Dream, then you can follow the instructions below:"
...and those instructions are long, and most intimidatingly - vague (much is implied, not all explicitly stated).
Yikes...
..........
I flashed the "old", and the phone now gets stuck in a boot loop on the "Rogers" (before the "HTC Magic" where it was getting stuck before).
The recovery is still the RA-sapphire-v1.7.OH... is that the Amon Ra?
I'll take a backup in this state, test-restore it (I know from experience with my G1 that the "HTC Magic" splash screen will be replaced with a Cyanogenmod one, with the Cyano 6.1.0) then put the Cyanogen on there and cross my fingers that I don't need to mess with that Kernel procedure...
EDIT:
I have a backup that restores - unfortunately it puts me back to the original "can't boot" state, lol.
Anyway, so after I took that backup, I proceeded to flash Cyano and the tiny Gapps.
I'm still getting hung on the Rogers screen - the Cyanogenmod boot screen doesn't come up.
WTF, you know?
EDIT 2:
I forgot to list my current state:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.33.2010 (SAPP50000)
CPLD-12
RADIO-3.22.20.17
Let me know if you can help, thanks
i think now you can boot into recovery and wipe everything and then try to flash the rom from sd card/
READ what is written...
You are still messing **** up...
You cannot boot ANYTHING until you get a working system on the device...
You keep "booting" to nothing because there is NOTHING to boot...
STOP for a second and READ.
I have giving you 2 options... do one of them...
The Cyanogenmod need EBI 1 kernel which you can find on the same page i gave you..
if you read the instructions, you also find i have written that...
Once again to be sure, flash EBI 1 kernel after the CM rom, then you flash gapps and you should be good to go...
Or flash "new" combo and download this rom:
http://forum.xda-developers.com/showthread.php?t=778083
I can't help any more if you don't READ before you act!
I did... wanted to take it one conservative step at a time... operating with a bad backup here... ;-) And that Kernel page on the Cyanogen wiki is just evil... it should have a source to download one and apply, for us mere mortals lol.
I downloaded an already built, already compiled EBI1 kernel, and that did work nicely. Phew.
Thanks for the tool and the help - I couldn't have done it without your help.
Okay, so question! I've got the same problem this person has with the starting point:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT- 1.76.0010 (SAPP50000)
CPLD-12
RADIO- 6.35.10.18
From this point, would I use the same process to get my phone to work?
..I'm a programming noob.
yawaemekat said:
Okay, so question! I've got the same problem this person has with the starting point:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT- 1.76.0010 (SAPP50000)
CPLD-12
RADIO- 6.35.10.18
From this point, would I use the same process to get my phone to work?
..I'm a programming noob.
Click to expand...
Click to collapse
Does your phone boot into the ROM?
I should probably explain a bit:
So my phone is caught at the "HTC Magic" screen at the startup. It won't go on any farther than that. When I hold down the VOLUME DOWN key and press the END key, I can bring up the screen that states the following:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT- 1.76.0010 (SAPP50000)
CPLD-12
RADIO- 6.35.10.18
The screen does give me some menu options:
HBOOT
<BACK> FastBoot Mode
<SEND> Simlock
When I press BACK, I get another set of menu options:
FASTBOOT
<VOL DOWN> HBoot Mode
<SEND> Reset Device
<ACTION> Restart to HBoot
<MENU> Power Down
..did that answer your question? ..i'm not sure.. LOL!
Yeah, so it's not booting into the ROM. Did you have root before? Did you have a custom recovery installed? Can you get into it by pressing home+power?
I bought the phone off of ebay so I don't know what was programmed on the phone before I got it.. :/
DonJuan692006 said:
Yeah, so it's not booting into the ROM. Did you have root before? Did you have a custom recovery installed? Can you get into it by pressing home+power?
Click to expand...
Click to collapse
Sent from my HTC Magic using Tapatalk
The HOME+POWER buttons bring me to a screen where there's a picture of a "!" inside of a triangle by the phone..
Your going to have to root using the goldcard method. A Google search of "root 32A magic goldcard" should get you were you need to be.
Okay, so I'm sorry to be such a noob, but I got everything ready for a Goldcard (cable and a new kingston SD), but then what I need is to set up the ADB which requires me to connect the phone to a computer.. I cannot access anything on the phone via the computer except for the memory.. the drivers won't install.
I'm using this website's instructions:
/theunlockr.com/2010/03/10/how-to-create-a-goldcard/[/url]
So, the second step is to create an ADB, and then the third requires me to access the phone itself and unmount the SD.. I'm kind of at a loss at this point..
what should I do?
You'll have to see if a friend has a phone that you can borrow to make the goldcard. The steps will be the same and it'll work on any phone running Android.
UPDATED!!!------------------------------------------------------------------------------------------------------------------------------
So I now have HBOOT!!! yay I missed those skateboarding androids
I want to be very careful from here on, so with hboot working is there anything I can do to get my phone back?
how I got hboot back:
I took the rom file out of a Australian RUU
replaced the radio with the one I currently have 3.22.20.17
replaced the hboot with a compatible one ( or so I thought )
and ran the mod'd RUU, which allowed it to get past the radio installation and instal new hboot
I am of course still semi bricked as I get a boot-loop ( sits at HTC magic screen for a few minutes than reboots )
and I still dont have access to recovery
I am still unrooted
and I still have a mismatched hboot/radio ( lol I ment to flash 1.33.0010H but I ended up flashing 1.76.0010H ) DOH!
so here I am with:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (sapp50000)
CPLD-12
RADIO-3.22.20.17
jan 14 2010, 00:14:58
------------------------------------------------------------------------------------------------------------------------------------------
So I think I may have bricked my magic
from everything I've read, I cant seem to find a working fix for my problem.
I was originally on CM6 and decided I wanted a sense rom so I installed sfm 1.0
http://forum.xda-developers.com/showthread.php?t=1025330
after running it for a bit I realized I couldn't get data access and found out I didn't upgrade my radio to 6.35.16.19
I also discovered for some reason I lost root.
I did something stupid without researching I went to the tutorial I used to originally root my phone.
http://greatbigdog01.wordpress.com/2010/07/12/new-shorter-rogers-magicmagic-rooting-guide/
at step 4 while installing the RUU it got stuck installing the radio and sat at 36% so like an idiot I pulled the battery.
now I am at a RUU USB screen
there is a picture of a microchip with a red x through it at the bottom
I have no recovery
I can run fastboot
I can only run adb shell after using "fastboot oem boot" which loads SFM 1.0
Every RUU Ive tried stalls installing the radio
everything I've tried to get root back fails
everything Ive tried to get recovery fails
any help on this would be immensely appreciated
Thanks
Dan
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008 (SAPP50000)
CPLD-2
RADIO-3.22.20.17
Nov 3 2009, 15:56:29
This may just totally frag my phone but I was wondering if this might work.
I've read a few posts of people fixing there 32b that was flashed using a 32a rom by flashing another 32a rom ( usually the Arabic one for some reason ) which gets them up and running to switch back over to 32b
would flashing a 32b rom just be a very very bad idea?
also I have access to another magic, could I use that in anyway to get me going.
just spit-balling ideas, dont really know enough to proceed without some advice.
Wow!! If Ive stumped the genius's here, I must really be screwed...
I tried a séance, and a little bit of black magik, in hopes of bring my phone back to life, unfortunately it didn't work.
any other idea's?
I'm pretty sure I can correct your issue with JTAG. PM me if you are interested in this as well as any others that see this.
Some new progress, read original post for update.
I tried something totally crazy without knowing what it would do, but it got me hboot back....lol
Just need to know where to go from here!
Thanks
Dan