Database Users

Can't hear conversation unless it's on speakerphone

So, my phone stopped working a few days ago. I've been running WM6 for quite some time now and I've even tried going back to Tmobile's ROM. Basically, when I receive/make a phone call, I can ONLY hear the person if I put them on speaker. They can hear me regardless, but I can't hear them. Pretty annoying.
Any ideas?

Heh! Quite a coincidence!!! I cannot hear anything from the headset either and it happened a short while after I upgraded to XDA6. It work fine with the stereo headset as well as with a BT one. The difference in my case is that I cannot switch to speakerphone. The phone is deaf without a hands-free device.
I have posted a separate thread on my problem - here it is

i have the same problem. phone is dead without a handsfree it happened to me last night all was good, i was listening to music to handsfree and removed them to make a call and it didnt work anymore..i reinstalled the rom, but no sound..any help anyone?
maybe the phone is stuck on handsfree..it things that the handsfree is plugged in or something?

problem solved trustworthy, i've put the jack in and out a few times..and now the sound works there is a switch that is pressed when you plug in the jack and maybe it got stuck on handsfree..try pressing it a few times..i don't know. now my phone works. i'll never plug in a handsfree again

I had the same problem--it was still under warranty...new MDA was the solution.
By the time it goes again I hope the next generation will be here!

I have the same problem as lilcam, the earspeaker is dead. I had the same problem once, and the service chage the speaker, first and the ringer, later and stars working just fine. Now, the silent speaker hits again and service says is not the same problem and they cant repar it. Does anybody have a clue?

Sisqo said:
problem solved trustworthy, i've put the jack in and out a few times..and now the sound works there is a switch that is pressed when you plug in the jack and maybe it got stuck on handsfree..try pressing it a few times..i don't know. now my phone works. i'll never plug in a handsfree again
Click to expand...
Click to collapse
Thanks for the hint, but I REPLACED the handfree jack and it still wouldn't work without the headset
The people, who got it serviced told me that there was a problem with the mmainboard, that they cannot deal with. As I've mentioned in my thread, they also told me that a faulty handsfree jack was a frequently occurring problem with the 9100. I would recommend to pdebeitia and Sisqo to try replacing the jack. Hopefully it might help...it did not work for me though...
BTW, pdebeitia and Sisqo, what ROM are your MDA's running or were runnig at the time when it happened?

"screetch" on call answer via Bluetooth?

I nearly always use a BT headset for calls since the Wing is a pain to hand hold while talking.
Nearly all people I talk to complain of a "screetch" type of sound when I answer a call with my BT headset. I've tried three different headsets, same result. The noise does not happen when I initiate the call, and I cannot hear the noise when I answer the call. at frst I thought it was just a one time event, but callers tell me the problem is consistent and loud enough that they keep their phone away from their ear when I answer.
Using a stock Wing (TMO factory ROM) with either a Jabra BT500 (most of the time), a Plantronics 590 or a Plantronics 6xx headset, same result with all.
Anyone experience similar or have ideas how to resolve?

Noone has mentioned it to me yet (just got my wing yesterday) but my MDA definitely did that on occassion. Only did it when it was on vibrate too...I think people were actually hearing the mechanical vibration on their end. And it only happenned via BT...which made it even stranger since that meant the mic wasn't even part of the phone.

Amazing, that's exactly what the problem was!
Apparently even when you answer via BT, the internal microphone is enabled for a second or two and it picks up the sound of the vibration motor.
Thanks for the advice, now to gripe to TMO or someone about the problem for what it's worth.

my mda has been doing the same thing for the past 2 days... but on all calls incoming and outgoing without the bt and it starts up with the bt but stops after a second.. is there anything to do to fix it?

Bluetooth settings for handsfree - without incoming call delay

Hey folks,
I've been struggling with this issue for months now and couldn't find a solution yet. Had the same problem with my Polaris before.
When using BT Handsfree profile, either with my Jabra 250 headset or with my built in car handsfree (Parrot) I get a more or less big delay after accepting a call until the audio stream is transferred from my phone to the BT device.
Meaning, accepting the call in the car results in like 5 seconds delay until I can actually hear what the person on the other end is saying. Until then the voice is still routed via the phones builtin speaker, as if no BT device would be connected.
Same happens with my Jabra headset, though the delay is less there. Maybe 2-3 seconds sometimes.
I tried playing around with Shaps Advanced Config or HD Tweak Bluetooth settings, but no luck so far :-(
Could anyone who is using BT handsfree devices, especially car kits, tell me if you get your audio on your BT device right away, without delay on your BT device? If yes, please tell me exactly what settings you are using for your BT on the phone, e.g. Bitpool min/max, Audio Gateway on/off, Joint Stereo Yes/No etc.
Please let me know if ya using S2U2 as well, I think this could add up to the problem, though for me I still have the issues when I disable S2U2
thanks,
boba

i am using a Bury comfort BT and it rings 2-3 seconds b e f o r e my phone rings! i did not tweaked any settings in my HD. i am not using s2u2.

I also have a Parrot in car hands-free system. Have to say, whilst there are and have been some 'issues' (from time to time) a long delay when an incoming call is accepted isn't one I get.
I don't have the 2 programs you mentioned, as I'd not heard of them before - so I'm running my HD (as far as BT goes at least) in stock trim - FYI I have the auto-answer selected (in 'Settings>Phone>More') set to talk after 4 rings, as a personal pref.
I do have issues with the BT on these phones - I think it's a WinMo thing though, as it's been the same on all the WinMo phones I've had - the BT is pretty retarded unfortunately and it's the one major gripe I have with it and ultimately 'put up with' (very begrudgingly, as it's a feature I use a lot)
Issues are;
Occasionally the phone will answer instead of the car kit (if it's in my pocket - although I may have solved that by having pocketshield 'slide to answer' on there now)
It will NOT auto-answer at all on my BT stereo headphones NOR [more annoyingly] my Scala-Rider motorcycle helmet kit (where every other 'normal' phone I have had has done so with no issues at all)
Every now and again it will freeze the car-kit by showing that there is an active call, when there isn't - and the only way out of it is a soft reset of the HD itself
I only wish there was a fix/tweak for the BT in WinMo - but it seems that most programmers don't see this as a priority area and as such it's not been resolved - maybe 6.5 will address it...but I'm not holding my breath!

Hello, same problem with my Motorola bt350, with and without s2u2.
Same with stock ROM or with dutty's ROM and other.
Its a known win 6.1 BT stack issue.
Regards
T

@ boba23
If you find a fix for that issue please tell me!!! its so annoying
T

Same issues here. Anyone find a fix.

thought it was mine in car blue tooth that has this problem...good (or bad?) to know that it's not an isolated incident.

same issue...
I have parrot MK9000 and HTC BH S100 (stereo). The delay is the same. I do not think there is going to be a solution.

Ι have the transfer delay BT issue here too.... the others person voice is going out from the phone for 2-5 sec and suddenly its transferred to BT heasedet.
Preety annoying, it happens to all my ΒΤ headssets (Jabra , Samsung) the dead seconds just varies.
Plz guys anyone who has solved this let me know

boba23 said:
Bumping this thread up again, since I am still facing the delay issue. I am pretty sure it's not ROM related, since I had this issue with all 6.1 roms I tried. Right now using Topix 2.7.
Played around with Advanced Config BT settings again, but I still have that incoming call delay with my Jabbra BT250. Mostly takes 3-4 seconds, after accepting an incoming call till I hear sound on my headset. I really can't believe that this is an issue that only a few ppl are facing. I have nothing spectacular installed, even disabled S2U2 to see if that helps, but nothing :-(
boba
Click to expand...
Click to collapse
I think this has to do with a combination hands-free / rom version. I have a built in car kit and if I accept the call with phone answer I get the voice right away on the car kit. If I accept it on the radio, it will take 2-4 seconds before sound is transferred to car kit.
I've made another test on a parrot car kit, with same ROM version as before, and it behavior was diferent. If I accept the call on the car kit button, the sound is transferred immediately to the car, if I accept the call on phone button, I get instant sound, but on the phone - private mode....
I made also this test with a plantronics headset, and the sound is transferred right away to the headset either I accept the call on the headset or the phone
so
I am using topix 2.9.4 6.1 rom version - but already tested with several 6.1 roms and 6.5 - behavior is more or less the same

boba23 said:
Bumping this thread up again, since I am still facing the delay issue. I am pretty sure it's not ROM related, since I had this issue with all 6.1 roms I tried. Right now using Topix 2.7.
Played around with Advanced Config BT settings again, but I still have that incoming call delay with my Jabbra BT250. Mostly takes 3-4 seconds, after accepting an incoming call till I hear sound on my headset. I really can't believe that this is an issue that only a few ppl are facing. I have nothing spectacular installed, even disabled S2U2 to see if that helps, but nothing :-(
boba
Click to expand...
Click to collapse
Hi Boba, you're not alone I use BT sometimes as a backup.. and I too have an annoying delay of several seconds... at that very moment I think "hey where's the incoming call", I then hear the sound from the normal phone speaker, and when I switch to the normal phone again the sound is passed to BT ....

Bluetooth Incoming Call Delay
Has anyone come across a solution for this yet?
I have always had a 1-2 second delay in being able to hear the caller using my BT250 headset but, after installing the Orange update ROM, the delay seems to have increased to 3-4 seconds. The caller can hear straight away though.
I have just purchased a BT2020 headset and the delay is still 3-4 seconds.
I am not confident in installing different ROMs (because of my limited knowledge) but would install any that will eradicte this really annoying delay. Any suggestions?

alanu said:
Has anyone come across a solution for this yet?
I have always had a 1-2 second delay in being able to hear the caller using my BT250 headset but, after installing the Orange update ROM, the delay seems to have increased to 3-4 seconds. The caller can hear straight away though.
I have just purchased a BT2020 headset and the delay is still 3-4 seconds.
I am not confident in installing different ROMs (because of my limited knowledge) but would install any that will eradicte this really annoying delay. Any suggestions?
Click to expand...
Click to collapse
Just spoke with Orange Technical Helpdesk and they are sending me a new handset.......will publish result.

Topaz + BT hands free (Sony MEX-BT2500)

Hi there,
Can anyone help me solve this problem:
Ik have a Sony car radio with a BT hands free function (MEX-BT2500) in my car. When I make a call, the radio stops and I can speak hands free, hearing the conversation on the car-speakers. All nice, like it should be.
Problem is when I receive a call. The radio stops and I hear a ringtone (not my phone-tone though ). When I awnser the call, the caller can hear me, but I can't hear him, unless I take the phone in my hand and put it on my ear. The sound doesn't come through the car-speakers. So an incoming call can't be awnsered handsfree.
With my former phone (nokia 6230), it was no problem. Anyone knows how to solve this?

If it was the same as my problem, turn up the volume on the phone
My phone was the exact same, for some reason when it connected it was turning the volume right down!
Hope yours as as simple

todd69 said:
If it was the same as my problem, turn up the volume on the phone
My phone was the exact same, for some reason when it connected it was turning the volume right down!
Hope yours as as simple
Click to expand...
Click to collapse
Unfortunately my problem is not that simple. I got an incoming call yesterday when I was driving, but again no sound. When I called back, there were no problems. Does anyone else have a solution?

Well, I don't have the Sony-stereo, but I've got a Pioneer with BT. I have bumped into several issues with it, and the solution is the same every time:
-first, if you have a settings-option called something like "reset BT-memory", try that one, and pair phone again.
-If that doesn't work, next step is full reset of the stereo, meaning you pull it out and disconnect the power. Then plug it back in, and re-pair phone.
This at least did the trick for me, now voice-dial works perfectly, and I even have "BT Audio", meaning I can play my Topaz' music on my carstereo without hassle.

Could also be something else simple, you are using the stereo to answer and not the handset?
If I answer using the phone with my stereo then I get the same issue as you, answer using the stereo and all is well

[Q] BT Headset OS problems?

Ok so I'm trying to trace down what might be happening here.
Ive got a LG Tone Pro 750 BT headset which I totally love for the most part (epic battery time for one thing). Bought it about a month ago.
About a week ago, maybe two, something weird starts happening. I'll get a call, pick it up and no sound. Caller may or may not hear me, but if they do, it appears to be garbled (I've done a poor job of asking callers if they could hear me and inquiring about that part of the experience so not very good feedback there).
Since I'd had the BT headset for a couple weeks already, I don't even consider there could be a problemo there. So I take the SG4 to Sprint and have a tech check it out.
He comes out to see me (never happens).
Asks me if I have the LG Tone Pro headset. He then proceeds to tell me that he has the same problem on his LG (!) phone with that headset (although it's a later model than my Tone Pro 750...next one up from that model).
He says that the only way he has been able to fix it is by unpairing and re-pairing the headset. Says he has to do it every other day or so.
That was early last week.
So for the next day or two, I go without the headset being re-paired. All is well with the three or four calls I get.
I pair the headset but don't get any calls. I do listen to some podcasts and that is fine (but was never a problem so no change there).
The next day (this morning) I get a call. Problem is back. I try turning off BT making calls and that doesn't fix it. Have to restart the phone.
So I do and I can now make and receive calls. However, BT is off.
It sure looks like this is a problem with the headset.
But I also noticed a preponderance of SG4 owners complaining about a somewhat similar issue where the mic would suddenly turn off on their phone, mid call. Seems WIFI signals would somehow interfere with it (I tried turning off WIFI though and that didn't fix it).
Is there anything else I can do to diagnose this better and maybe get to the bottom of it?
What could be happening here? Is this the headset not playing well with the OS? Is there a way to tell?
Why would this start happening off a sudden two weeks after I'd been using it heavily with no problems?
Also, I'm trying to find more instances of this issue online but it's tough one to Google.
(As a side note, LG doesn't seem to be a very good company when it comes to customer service. I saw several instances on Android Central where their customers reported issues with the headset and then were told their posting violated the TOS of the forum. WTF is up with that? Have they not realized there is ths thing called the Internet? Do they think people won't eventually catch on? )
I'm seriously considering returning this thing, but the truth is, I really want to keep it if I can get it to work. Probably a pipe dream though, now that I've written all this out. lol
I'm even considering rooting my SG4 and throwing another ROM on to see if that fixes it. That's how much I like the headset.
Happy to receive any feedback from fellow forum members. Thanks in advance.
PS: Just realized I haven't really tried just unpairing and re-pairing more than once so I'm going to test that some more over next few days meanwhile...

I am having the same problem but with different headset (MOW and Jabra).
One thing that I tied worked but I can only use my headset to listen to music. In each headset setting located in the Bluetooth pairing list, I uncheck the CALL AUDIO and leave the MEDIA AUDIO check. This allows me to use my headset for music but not calls.
A complete fix would be great, please?

BT media audio works, phone audio fails
readable said:
I am having the same problem but with different headset (MOW and Jabra).
One thing that I tied worked but I can only use my headset to listen to music. In each headset setting located in the Bluetooth pairing list, I uncheck the CALL AUDIO and leave the MEDIA AUDIO check. This allows me to use my headset for music but not calls.
A complete fix would be great, please?
Click to expand...
Click to collapse
Glad you posted this because I hadn't even thought to try, as part of my troubleshooting, whether I could still play media on the phone through the headset when call audio was not coming through.
Last night I made a couple of calls just fine with my LG Tone Ultra (upgraded to see if this fixed the problem, but no change) and then made a third one. On this third one I could not hear any sound but the call connected (it was to my wife--she later told me she got a call but no sound on her end either).
So this is very strange. Somehow the BT headset is just dropping the call side of the audio.
And, it's doing so randomly.
Sure would like some more insight on what is likely the cause of this situation. I submitted a question to LG through their website but no response. That was days ago.

Chapter 2 of this problem
readable said:
I am having the same problem but with different headset (MOW and Jabra).
One thing that I tied worked but I can only use my headset to listen to music. In each headset setting located in the Bluetooth pairing list, I uncheck the CALL AUDIO and leave the MEDIA AUDIO check. This allows me to use my headset for music but not calls.
A complete fix would be great, please?
Click to expand...
Click to collapse
Just posted a new thread on this issue with some log data that I'm hoping a kindly dev may help decipher.
Letting you know in case you want to keep an eye on that thread as well.