Related
No computer detects my TyTN anymore. Not even to display the "New Hardware Found" message that I usually get when plugging the TyTN into a USB port of a computer that hasn't seen the device before. Nothing. The phone still charges and the it still knows when its plugged by the icon on the lower right corner of the screen.
I've searched the forum for this very issue, and found mostly activesync issues/solutions. I've tried them all with no success. BTW activesync works for me via bluetooth. My last resort was a hard reset. Three times... (read from one of the posts). Now I'm stuck with a TyTN with a Dopod ROM.
Has anyone experienced this problem?
I tell you, having a kick-ass phone but without a way to push the customization files into it is TORTURE.
Please help.
I had a smiliar problem when I Installed XP-MCE.
I solved it by downloading the latest Active Sync and Installing it, From there windows picked it up as a Mobile Device.
jford04 said:
I had a smiliar problem when I Installed XP-MCE.
I solved it by downloading the latest Active Sync and Installing it, From there windows picked it up as a Mobile Device.
Click to expand...
Click to collapse
Thanks for the reply. I use ActiveSync 4.5 on Win2K, XP and XPMCE. The computers are not able to detect it at all.
Reinstall Activesync
Try reinstalling Activesync (which will uninstall the earlier install of the same or earlier version). This worked for me. I face this problem once too often coz I sync with my desktop and laptop.
try deleting the partnership on the phone and then try plugging it in, make sure all the partnerships on the phone are deleted, i had the same issue with my tytn and that solved it.
Another issue i had was that windows was detecting the device but still would not allow it to connect , so what i did there was just go into computer management (right click on my computer then click manage) and uninstall the device while it was connected then unplug and plug it back in and windows re-detected it. Also make sure you have the atest version of active sync installed.
Hope this helps
Check device manager - does it even refresh when you plug your device in?
If it does not, you may have a big problem...
Have you tried an alternate USB cable? It could be that that is shot.
Have you still got the min-USB headphones? If so, do they still work?
If they do not work either, that would suggest that the device's USB port port is shoddy...
And reality sinks in...
yrreP said:
Check device manager - does it even refresh when you plug your device in?
If it does not, you may have a big problem...
Have you tried an alternate USB cable? It could be that that is shot.
Have you still got the min-USB headphones? If so, do they still work?
If they do not work either, that would suggest that the device's USB port port is shoddy...
Click to expand...
Click to collapse
Yeah, I think the USB port on my TyTN is partially dead. This feels like being with Verizon and their locked phones. Sucks wet cow butt.
Oh well, I'll just learn to live with my Dopodish phone until HTC comes out with TyTN III.
Thank you all who replied.
I have the following problem with my HTC Touch HD. Since yesterday after i transfered 2 video files and a few pictures, when i connect it through USB, the computer doesn''t detect HTC anymore (nor syncing nor file transfer). Even the Bluetooth syncing does not work. I performed several soft and hard resets, and it seems it;s getting worse after every reset.
I bought the phone 2 weeks ago, after i sold my Apple iPhone 3G 8GB. As we speak, i kind of regret i did that...any advise for me ?
I forgot to mention: when i plug the uSB cable, the device goes recharging.
Have you tried booting your pc ?
Also try unchecking Settings/connections/Usb to Pc/ "enable faster data synchronization"
r
Andrew
What cable do you use? I had similar problems with non original (asus) usb cable.
greetings everybody..
1) i tried what you said several times, no result.
2) i get same results with the original and the other cables..
3) i noticed one thing . . . if i connect the device to a computer that i never conected before the device, it launches active sync....and Active Sync just wont interact with my device.
Did you try reinstalling ActiveSync on your PC?
yes i tried....same result. Do you think a change of ROM would solve that ?
Now, even a syncronisation using bluetooth is almost impossible, since i cant pair the computer and the device. Damn, it's like a virus or something.
stupid thought:
Do you think a change of ROM would solve that ?
Click to expand...
Click to collapse
Impossible since i cannot connect using USB. Sorry !
I too had problems with my PC not recognizing the HD. Found out that it was a problem with my firewall and anti-virus. I adjusted anti-virus settings to allow active sync to pass through and have had no problems after that.
HTC also recommends going to Start --> Settings --> Connection tab --> USB to PC and deselect the checkbox for "Enable faster data sync"
For device recharging when plugged in to USB : go to Start --> Settings --> System tab --> Power. here below the battery charge indicator, there is a checkbox. Read the message and check/uncheck as desired.
Hope this helps !!
i thought one potential source for my problem would be the antivirus, but i disabled firewall (eset at work and symantec end point protection at home) and no result what so ever.
I cand figure a way to sync the device even with the bluetooth since i cannot pair the device and the computer.
I am starting to regret i bought HTC...
Try click the Activesync icon on HD Program, there is a "Option" on the menu, click and see if you could delete all the old connect. If yes, re-establish the connection again to see.....good luck
Option menu item is disabled (i performed several hard resets)...(
Another thing i noticed. I unchecked the box (when connected to USB charge), so now when i plug the usb cable, it wont charge. But, if the device is in stand by (black screen), and i plug the usb cable, it wakes the device up. So, in my mind, i think it is something wrong with the OS, it still "feels" the USB cable, but cannot (for an unknown reason) take the necesary action.
For 4 hrs i try to sync the device with the computer using bluetooth, and i cannot manage to do so.
Is there any way to reinstall ActiveSync on my HTC device ?
daemonus said:
Option menu item is disabled. For 4 hrs i try to sync the device with the computer using bluetooth, and i cannot manage to do so. Is there any way to reinstall ActiveSync on my HTC device ?
Click to expand...
Click to collapse
My sync problem with HD and my PC with Vista, was solved as follows:
- Uninstall Windows Mobile Device Center
- Reboot and reinstall WMDC
Ton V
NLBeev said:
My sync problem with HD and my PC with Vista, was solved as follows:
- Uninstall Windows Mobile Device Center
- Reboot and reinstall WMDC
Ton V
Click to expand...
Click to collapse
Tonight i will try to install at home Windows VIsta (at work and at home right now i have XP). I cannot use my phone - no phone number in agenda and it's driving me mad. The phone rings and there are quite a few persons i dont want to talk with.. HEEEEEELP
nobody there to help me ?
If you did a hard reset, and you can connect in drive mode, but can not sync, then I am 99.9% sure that there is nothing wrong with your phone, but that your computer is messed up.
Uninstall all your antiviruses, firewalls, and other bloatware, and see if it works then.
Just a possible solution, but did you try plugging in your phone into other USB slots on your PC? Are you perhaps trying to sync it through an USB extension cord, or maybe USB hub? I had problems with my PC recognizing the THD if I tried syncing that way. Best results were plugging it directly into the back side of the casing.
The reason I'm asking this is that if you have too many USB devices plugged in, it's possible that the USB voltage drops too low and devices won't connect to the computer.
I tried on 5 different computers, all available USB ports.
On a new computer, sometimes on the device screen it shows up Active Sync but that is all, no sync occurs. If i try again on that computer, i get the same result as i get using the computer at home or work.
The device cannot conect as a Disk Drive
Is there a way to reinstall Active Sync on HTC ? My guess is that this software is all gone with the wind (even i performed a hard reset). The big question is what the hell happened ? Could be a ROM fault ? I mention i never tried to change ROM, the only software i installed was S2U2 and Core Player.
If by monday it wont work, then i'll send it into service (i have warranty). But i hate service
all out of ideas...
Any ideas ?
Which items are checked when you go to Settings/connections/Usb to Pc/ on youre phone?
Have you tried to use another memory card (because youre problems started with copying)?
I recently had to replace my notebook, new one came with Vista, also coincided with purchase of Touch Pro 2.
my current kaiser (WM 6.0) works fine, connect usb, vista fires up mobile device center.
connect pro 2 (WM6.1) via usb , nothing, device center does not start up.
run active sync on the pro 2, Sync button is grayed out. I have set 'sync all pc's....' to usb in the connections screen.
have checked other threads but so far come up blank.
can anyone point me in the right direction to possible fixing this, I need to reload some software not to mention I would like to and would like to check out some of the roms on this sight.
chrisnz1947 said:
I recently had to replace my notebook, new one came with Vista, also coincided with purchase of Touch Pro 2.
my current kaiser (WM 6.0) works fine, connect usb, vista fires up mobile device center.
connect pro 2 (WM6.1) via usb , nothing, device center does not start up.
run active sync on the pro 2, Sync button is grayed out. I have set 'sync all pc's....' to usb in the connections screen.
have checked other threads but so far come up blank.
can anyone point me in the right direction to possible fixing this, I need to reload some software not to mention I would like to and would like to check out some of the roms on this sight.
Click to expand...
Click to collapse
Have you tried starting mobile device center manually? Also had some troubles now and then, reboot of my pc and softreset of my phone usually fixed my problems. Else most responses will probably include the usual: remove all partnerships and/or reinstall mobile device center.
Btw, does your device show up in your hardware list or under my computer when connect it to your USB port?
mobile devioce center (Vista) and htc pro 2
have tried pc reboots and htc reset, no go.
If i connect my kaiser it appears as a device under my computer and device center picks it up.
connect the pro 2, does not appear as a device under my computer and if device center running does not attempt a connect, if device center not running vista does not start it
also no partnerships currently set up.
did have a kaiser one , deleted this when the pro 2 did not connect
chrisnz1947 said:
have tried pc reboots and htc reset, no go.
If i connect my kaiser it appears as a device under my computer and device center picks it up.
connect the pro 2, does not appear as a device under my computer and if device center running does not attempt a connect, if device center not running vista does not start it
Click to expand...
Click to collapse
Well as far as I know Windows should at least show your device under My Computer, even without a partnership or without even having Mobile Device Center installed.
So my best guess is there is some conflict which prevents your TP2 from even connecting to your notebook. Have you tried connecting it to a desktop PC? Or are you trying to connect it through an USB hub or something? If so it is possible the hub isnt delivering enough power.
I had the same issue and ending up hard resetting my phone before I figure what I did wrong. Go to settings on TF3D then all settings. Go to connections, and under usb to pc, select active sync. If it says disk drive it will not work in active sync. Also if the enable faster data sync is checked...uncheck it. Sometimes this causes an issue.
Go to settings and choose USB->PC Settings. Here you can disable "fast synch". Now it should work, if not, activate "fast synch" ^^
YOu might want to re-instal active sync ( device center ), I had a simulair problem, and it was solved
gz reb3lzrr
rodium and vista sync
firstly thanks for the many replies.
still no go
reinstall device center
rebooted pc, reset phone.
tried with a xp laptop with active sync, still no go.
neither pc recognises the rodium phone.
when I attach my kaiser each pc 'chimes' , ie recognises the attachment and activesync or device center start up and connect
rodium nothing.
tried each of the usb ports and couple of cables, all work for kaiser non work for rodium.
Hi. I have had the same problems. Disable fast sync like my man neonoxDE said. That will help you. Altough it helped me. With Win7 you can sync with that option enabled.
(QUOTE: Go to settings and choose USB->PC Settings. Here you can disable "fast synch". Now it should work, if not, activate "fast synch" ^^)
thanks tried that as well, still no joy.
Its has if the phone is not telling the op system that its there. Ie the interupt to the op system that happens when a usb device is attached is not happening, or being ignored.
i had the same problem. i had to uncheck the box advanced network funtions. that wen you go in to settings and usb to phone.
that was the problem with my phone sync.
sorry for bad english.
Ugh
Just went through this all tonight. Also coming from a Kaiser (AT&T Tilt).
To get it functional, I had to:
1.) Add Remove Programs
2.) Remove Windows Mobile Device Center
3.) Remove Windows Mobile Device Center Driver Update (if you installed it).
4.) Disconnect USB from phone.
5.) Reboot
6.) Reinstall Windows Mobile Device Center 6.1 from CD (Sprint here).
7.) Install Windows Mobile Device Center Drvupdate. (WMDC dir on Sprint CD, called drvsomething or other, depending on if you're 64 bit or x86 on your PC).
8.) Then had to "Clear Storage" on the phone and let it clear itself (a simple reset did not let this work)
9.) Once soft reset was completed, I could connect the phone, it then found it, and worked correctly.
Yeesh.
Unchecking the box everyone is saying didn't have an effect for me, though I tried it many times before going all nuclear.
Thanks for this.
Tried this on my vista laptop still no go.
If I connect my kaiser 'installs device driver software' pop up displays and when this is finished windows mobile device center starts up.
Initial connection of pro2, nothing
After having the pro 2 connected for at least 45 mins I did get an an install device driver message, the device was unknown and device center did not start up.
so it appears that the pro2 was recognised has an unkown device
additional info
loaded down a usb moniter onto my laptop.
When I plug in the Kaiser usb monitor shows connection of the device on the specific port.
Unplug this and plug in the PRO2 onto the same port nothing shows as being connected.
rapidlycomming to the conclusion problem with the data pin outs on the USB, does anyone know of a diag program that could test this out or an easy way to check this.
save me the initial cost of checking by a repairer (which in the UK can be steep)
Although my TP2 will sync with USB, most of the time I sync via a bluetooth connection.
Have you tried doing it that way?
Maybe this will work.
One unconventional way to fix this, is to go to your phones activesync. select menu, then change it to bluetooth sync. After that, soft reset phone and connect via usb.
Windows Update
Try conducting a Windows update manually when your phone is connected via USB cable.
Cheers
andrew-in-woking
Hi there,
I've had my HD2 for 2 weeks now and its been working perfectly. I decided to hard reset my phone and start again from scratch. However, now when I connect it to my PC it doesn't connect or recognise it at all, it charges though. I also tried it on my laptop, thinking it might be my PC but its just the same. This is really frustrating and any help would be greatly appreciated.
Goto "Start/Menu/All Settings/Connections/USB to PC" and ensure ActiveSync button is green.
If you are running Vista or Win7 you have to install Windows Mobile Device Center. http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
If not the normal Active Sync will not see the phone.
Hey guys. I know this a old thread. I notice ever since I used the program here to change the radio on my htc hd2 that my computer no longer detects my phone with snyc cable even if I have Windows Mobile Center 6.1 installed an such. The programs pop up though when I look on device manager there no unknown devices or anything. In fact I don't even hear a sound of any sort that a usb device was plug into my pc same thing on my laptop. I even put back original tmobile rom on my htc hd2 no resolve. When I fflash it with Leoimg.tbh or how ever you spell it I put it in my sd card. Any ideas on how to get the old phone to work on windows 10 again? or is something mess up in the coding on official rom or on how I flash it back to stock?. I wish I had a old pc with windows vista to see if it just windows 10 or what. Just seems so odd
no reaction from phone nor pc
Hi, guys i have similar problem, but it has nothing to do with Active Sync. The device won't notice that it is connected to the pc (it won't ask (this option is ticket) if it should act as card reader, modem or Active Sync) so as pc won't show new device. Strangely, while the device is connected into an outlet charger via cable including data wires and "don't charge if connected to a pc" option is ticket in hd2, it acts as it is connected to a pc and won't charge. When it is connected to a charger with unseparable cable (which i suppose hasn't have data wires) it starts carkit menu. For me it seems like something is shorted but i'd like to hear some other suggestions before i try to disassemble it and look inside.
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Same thing here.
It charges through USB but it doesnt connect.
If i choose the storage option it works fine.
I want to sync my outlook and i cant...
What the heck...?
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Come on... give something drastic!
Already done that, rebooted the pc and the hd2...
still nothing
djchubbs said:
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Click to expand...
Click to collapse
believe it or not i have done that mannyy times and did alot of device manager things to try and let both computers recognize the hd2 but still nothing haha..
ive had previous hd2's and they've all connected fine untill this one, maybe its this specific one thats giving me trouble. but regardless, it charges via usb then it should be able to recognize it
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
johncmolyneux said:
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
Click to expand...
Click to collapse
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
k20a1 said:
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
Click to expand...
Click to collapse
That is very weird. Sorry mate - never heard of it doing that for anyone before.
Make sure you have the mobility center/active sync program installed on your computer. Without it it won't work.
On Vista or Seven, with the HD2 plugged in, you can find the program/drivers by launching and refreshing manually Windows Update. On XP you have to do that manually.
Good luck.
This happens to me often. In my case I have found it to be a weird driver issue. Go to device manager and look for the yellow triangle. Right click and update driver software. This worked for me I hope it helps.
bit late but just flashed maxsence and i love the look, but have allready had to restart by phone 10 times in 10 minutes. I'll wait for the next release. back to GTX for now.
Good work NRG. keep it up.
this is one of the many WM6.5 errors!
need Android soon!
Ok here we go.
The phone did not connect through activesync to my pc. When i selected to connect as mass storage it connected.
I checked for driver issues in device manager but nothing came up.
I checked the hd2's activesync. Bingo! the activesync was crashing when i was running it. I had to hard reset the phone.
Now it works fine.
My guess is that maybe a program that i installed recently was buggy and created this particular problem. Unfortunately i have about 50+ programs installed (including themes etc) and i m not sure which one it was.
I was installing all the programs again today one by one and after the install process was completed i connected the hd2 to usb to find which app was the problematic one.
After installing almost(some were found useless) all of the apps (here is the crazy part) the hd2 still was connecting through activesync....
HTC will drive me nuts...
Anyway the phone now connects correctly.
I cant understand which was the problem....
as odd as it may sound i think i figured it out.
i think its the usb cable that im using, i have to wiggle it around for it to connect to active sync but once it connects its not a stable connection as it cuts in and out.
but charging capabilities work though!
pos wire, i ordered a new wire and if that one fails also, i will have to get my hd2 replaced for faulty usb port
thanks for all the replies much appreciated
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
angelossssss said:
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
Click to expand...
Click to collapse
i did whenever i custom rom'd it, it still does the same thing. yes it will connect via usb while in bootloader but will not during regular phone operations lol
"Disk drive" mode not working with XP laptop
HD2 is working fine with my desktop, but wit laptop I can only use ActiveSync to browse files.
When I connect the USB cable I get:
"Found new hardware wizard"
but it tells me that it Cannot Install This Harware - Disk Drive
"An error occurred during the installation of the devie The system cannot find the file specified"
And I only have "Finish" to click - if I click it the wizard lunces again immediately and goes on and on with no end.
HD"/Leo does not appare in Disk Manager (I know ablut the drive lettering issue)
I'm sure its my XP issue, but I havent found drivers to fix that, and I'm not about to reinstall XP on my lappy in near future.
Transfer files - Solved
;
k20a1 said:
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Click to expand...
Click to collapse
I share the same here and I was despaired of trying to solve it with any logical, as well with illogical, measures. Such as: rebooting, changing usb cables, reinstalling activesync 4.5, etc.....etc...blla..blla...blla...
However, I solved the "Transfer files issue" by taking out the sd card from the HD2 and connect it with an external cards reader to my pc.
The card reader connected and works with the same usb cable that does not work with the HD2.
That way I load it with all files and in the same occasion I reload into my computer the daily spb backup files.
However, I have the feeling that the reason for that problem is a missing file/driver named: "Setup1.SPL" in the pc windows operating system.
In order to solve that it seems that only reinstalling windows on my pc will be the solution which defiantly do not like.