Related
making this now this is for Touch Settings updates.
THanks Carlos!
ambush276 said:
making this now this is for Touch Settings updates.
THanks Carlos!
Click to expand...
Click to collapse
Where is the file for the " Touch Settings " ? You should start by attaching the settings file since this will be the main thread for Touch Settings
i posted detailed instructions as to how to get the "Touch Settings" program to work correctly on the Sprint Touch a few days ago. I'll re-post it over in the Vogue forum shortly
utexascg said:
i posted detailed instructions as to how to get the "Touch Settings" program to work correctly on the Sprint Touch a few days ago. I'll re-post it over in the Vogue forum shortly
Click to expand...
Click to collapse
Please don't re-post this information, as I have now built a new version of the program that should work on the Sprint Touch without any special instructions required. It's been tested by Sprint users and seems to be working well so far.
You can download the beta (v1.29d) from www.fatattitude.com/software
For installation instructions please see: http://forum.xda-developers.com/showthread.php?t=324556
Best,
Carlos
Works great on HTC Touch! WooHoo!
Very Nice job. Very Nice, indeed.
Personally, I wanted the photo to launch the HTC Camera Album.lnk the way you can scroll with your finger & zoom, etc.
So, I created the Photos button in MediaHub to be:
\WindowsHTCAlbum.exe
Params: -mode:camera -type:image
when i try and install the settings app i get a error messsage about
"Installation was unsuccessful. The program or settings cannot be installed because it does not have sufficient system permissions"
how do i chang it so i can install and run this.. thanks
whipple16 said:
when i try and install the settings app i get a error messsage about
"Installation was unsuccessful. The program or settings cannot be installed because it does not have sufficient system permissions"
how do i chang it so i can install and run this.. thanks
Click to expand...
Click to collapse
If you look at the post at the top of this page by Carlos, you'll see he says, "For installation instructions please see: http://forum.xda-developers.com/showthread.php?t=324556."
He also gives these suggestions:
- If you're installing to Storage Card, try installing to the Device instead.
- If you still get the error, try resetting your device and installing again - this honestly worked for me!
- Check there is enough free storage space on your device.
- Try a manual installation (zip file coming to first post shortly)
There are many posts about this in other threads, so you should be able to find the info you need.
Carlos,
Any reason to upgrade to 1.29e if d is working well?
Secondly, if we do upgrade - do you have to uninstall first? or can you overwrite the program?
I don't seem to be able to see a changes history. I'll keep looking.
carlos said there is a new touch settings version comming out soon where it will help implement animations and custom icons will show when the cube turns. WOOT. and we wont have to install the updated Exe, it will be updated for us.,.]
THANKS CARLOS!
ambush276 said:
carlos said there is a new touch settings version comming out soon where it will help implement animations and custom icons will show when the cube turns. WOOT. and we wont have to install the updated Exe, it will be updated for us.,.]
THANKS CARLOS!
Click to expand...
Click to collapse
I've been absent for a few days and WOW...things are shaping up! Thanks Carlos! You are awesome! (Enough exclamation points?)
ambush276 said:
making this now this is for Touch Settings updates.
THanks Carlos!
Click to expand...
Click to collapse
I have spent a good deal of time getting my Sprint Touch to display my local weather by using N2A's "patched" HtcHome.dll which points at a server that does support my local weather (unlike the Htc's accuweather server). Now I would like to use 'Touch Settings' to easily customize what apps get launched from my 3x2 app launcher and the media hub buttons, but I'm not sure if I dare do this yet since I haven't seen anyone explain how 'Touch Settings' accomplishes displaying local weather.
Can anyone tell me how it does this? My concern is that it may conflict with the patched home plugin I already have working.
SprintTouchGuy said:
I have spent a good deal of time getting my Sprint Touch to display my local weather by using N2A's "patched" HtcHome.dll which points at a server that does support my local weather (unlike the Htc's accuweather server). Now I would like to use 'Touch Settings' to easily customize what apps get launched from my 3x2 app launcher and the media hub buttons, but I'm not sure if I dare do this yet since I haven't seen anyone explain how 'Touch Settings' accomplishes displaying local weather.
Click to expand...
Click to collapse
Hi SprintTouchGuy
Touch Settings updates the registry keys at \HKLM\Software\HTC\HomePlug\Weather\Settings
I don't think this should change your server settings etc, and it certainly won't change which .dll file your weather is pulled from.
Why not do a registry backup of that key, try out Touch Settings and if there are any problems, just restore your registry? I think you'll be OK with it.
Hi all
I have a new beta of Touch Settings v2.0 that I'd really like a couple of people to test for me, in particular people with Vogues and Touch Duals, especially pp18 and that other kind person who volunteered.
I have posted it in:
http://forum.xda-developers.com/showthread.php?t=324556&page=20
....if you could keep feedback in that thread for now please? Feels like we have too many threads going at once otherwise and gets confusing!
Thanks,
Carlos
carlosp_uk said:
Hi SprintTouchGuy
Touch Settings updates the registry keys at \HKLM\Software\HTC\HomePlug\Weather\Settings
I don't think this should change your server settings etc, and it certainly won't change which .dll file your weather is pulled from.
Why not do a registry backup of that key, try out Touch Settings and if there are any problems, just restore your registry? I think you'll be OK with it.
Click to expand...
Click to collapse
Works great...thanks Carlos!
One thing I noticed would be interested in finding out if other Sprint Touch users are seeing: after updating my "On Demand" app launcher's button to open a different app in the mediahub, the "Demand" in the text "On Demand" is now half cut-off. I assume this text (which I would like to change anyway) is stored in the registry somewhere and is not editable via Touch Settings yet. I can spend some time researching which settings to manually change in the registry, but if you are going to add this feature soon to the app, then I won't spend the time.
Thanks again, regardless...
SprintTouchGuy said:
Works great...thanks Carlos!
I assume this text (which I would like to change anyway) is stored in the registry somewhere and is not editable via Touch Settings yet.
Click to expand...
Click to collapse
Hi SprintTouchGuy
Glad it's working for you! If you run Touch Settings, you should be able to click in the grey box where it says "On Demand" and change the text to anything you like... ...let me know if it doesn't work for any reason.
C
carlosp_uk said:
Hi SprintTouchGuy
Glad it's working for you! If you run Touch Settings, you should be able to click in the grey box where it says "On Demand" and change the text to anything you like... ...let me know if it doesn't work for any reason.
C
Click to expand...
Click to collapse
Thanks Carlos...I can't believe I didn't think to at least try tapping in there! (Oh me of little faith...)
Next minor issue:
I made my bottom mediahub button say "Voice Recorder", and the word "Recorder" wrapped to a second line which is half-way cut off. I see that text wraps on the middle button as well, and although it doesn't get cut off it does look off-center vertically. I don't know if there is any way to adjust the text vertically with the magic that you do, so for now I'll try to come up with one word labels for the buttons to avoid the issue.
I also am curous what parameter to use to get the HtcAlbum.exe to launch the Camera Album to display just videos, like the 2nd-row 3rd button in does in the 9 button app launcher that comes on the 3rd tab of the HTC Home plugin. Does anybody know what I need to supply? I believe there is a mode: option, but when trying "mode:video" it still only comes up displaying pictures, and it does so in portrait view, not in landscape view like it does from the app launcher (which I prefer). My apologies if this has been discussed already...thanks!
carlosp_uk said:
Hi SprintTouchGuy
Glad it's working for you! If you run Touch Settings, you should be able to click in the grey box where it says "On Demand" and change the text to anything you like... ...let me know if it doesn't work for any reason.
C
Click to expand...
Click to collapse
Carlos - this is kind of a QA issue with the interface. Can I make the suggestion that you change the color of that box from gray to something like yellow? The first few times I opened the app I thought it was the typical "grayed out" box -- meaning I couldn't edit it. Whereas when I see a yellow box it grabs my attention and suggests I should be doing something with it...
anybody have a cab for manila start menu? enlargestartmenu 2.1 i think. i have a sense 2.1 rom with the registry keys still there but not the packages. i miss having a nonugly start menu.
edit: nevermind. captain throwback found it. http://forum.xda-developers.com/attachment.php?attachmentid=249472&d=1258927645
does anyone have the defaults for the strings in HKLM\Software\HTC\Manila\ProgramLauncher\0\ ? the cab doesnt have the home button that i cant get that i want back.
edit: see, i search for hours then give up then ask a question and minutes later i find the answer.
command: --switchtopage Manila://home/browserlayer/?.page
dispname: Home
iconpath: \windows\HTC\Assets\Images\programlauncher\Program_icon\home_88.qtc
path: \Windows\Manila.exe
and to be sure i dont delete it, isreadonly: 1
The Jack of Clubs;5025861
edit: nevermind. captain throwback found it. [url said:
http://forum.xda-developers.com/attachment.php?attachmentid=249472&d=1258927645[/url]
Click to expand...
Click to collapse
Thanks I was looking for this for days...
thierry2064 said:
Thanks I was looking for this for days...
Click to expand...
Click to collapse
Still doesn't work for me
siempie76 said:
Still doesn't work for me
Click to expand...
Click to collapse
im not sure which ones actually enabled it but it cant hurt to go and do them all.
hklm\software\htc\enlargemenu\enable to 1
hklm\software\htc\enlargemenu\enablemanilastartmenu 1
hklm\software\htc\enlargemenu\disablelandscape to 0
hkcu\software\htc\enablestartmenu to 1
whats really nice about this compared to the touch pro is that the start menu hard key opens the manila start menu rather than the microsoft one.
The Jack of Clubs said:
hkcu\software\htc\enablestartmenu to 1
Click to expand...
Click to collapse
The right path is HKCU\Software\HTC\Manila\Enable StartMenu = 1
(I just redid it for Josh's ROM)
thanks. solves looking for it again.
edit: its hklm\software\htc\enlargemenu\enablemanilastartmenu that works for me.
Does this enable the Sense Start menu if you aren't using Sense as the Home screen? That would be sweet, I like the standard old style WInMo Home but not the 6.5 start menu.
When HTC Sense is enabled the "settings" link in the program screen is linked to the settings tab/pane in HTC Sense. When Sense is turned off in the Today-settings, the same link points to the standard setting screen of windows mobile.
What I want is to make the "settings" link in the program screen to point directly to the standard windows settings (used to be "control panel), or better yet: a standalone HTC settings app then can run outside the Sense environment.
Why? I want to turn of the settings tab in the HTC Sense interface. Something that easily can be done by editing the registry. This way I can manage to minimalize the amount of tabs to 5. Just enough to prevent the disorienting scrolling to the left and the right when selecting a tab.
Can it be done? Is there an easy way to open the windows settings screen while Sense is enabled?
Thanks
You should try BsB Tweaks, one of it's options does just that.
Find it here:
http://forum.xda-developers.com/showthread.php?t=589305
Is there a way how to set it through registry instead of installing a special app on that? Thanks
Pappagallo said:
You should try BsB Tweaks, one of it's options does just that.
Find it here:
http://forum.xda-developers.com/showthread.php?t=589305
Click to expand...
Click to collapse
Thank you!!!! Just what i was looking for....
For who wants to know:
HKLM\Software\HTC\Manila\Configuration\12
Setting Enable to 0 hides the Settings panel in Sense.
Marv-in said:
Is there a way how to set it through registry instead of installing a special app on that? Thanks
Click to expand...
Click to collapse
BsB Tweaks does much more than just this.....Just check out the page and you will find that BsB Tweaks is a MUST HAVE App
Besides lots of tweaks it also makes it easy for you to Add Rotation for programs that do not automatically rotate, and/or add Pinch-to-zoom for programs that by themselves do not support pinch-to-zoom.
If you don't want to install the app, you could ask makeveral how he does the settings Tweak (I wouldn't know).
Pappagallo: Ok, thanks for tip.
Marv-in said:
Is there a way how to set it through registry instead of installing a special app on that? Thanks
Click to expand...
Click to collapse
Set this to zero:
HKEY_LOCAL_MACHINE\Security\Shell\StartInfo:HideSettings
and reset.
But there will be two identical icons for Settings after this. You can delete settings.lnk from the Start Menu to get rid of the HTC Settings.
Dmitry N said:
Set this to zero:
HKEY_LOCAL_MACHINE\Security\Shell\StartInfo:HideSettings
and reset.
But there will be two identical icons for Settings after this. You can delete settings.lnk from the Start Menu to get rid of the HTC Settings.
Click to expand...
Click to collapse
Awesome, thats exactly what i was looking for. Thank you very much.
Dmitry N said:
Set this to zero:
HKEY_LOCAL_MACHINE\Security\Shell\StartInfo:HideSettings
and reset.
But there will be two identical icons for Settings after this. You can delete settings.lnk from the Start Menu to get rid of the HTC Settings.
Click to expand...
Click to collapse
That's fantastic. Now do you have any idea how to create a quicklink to the new windows settings? Can't find it for the life of me...
yes. noob here. All the *setting*.ink's i can find lead back to the sense settings, or handle different/specific settings entirely.
ozcr said:
That's fantastic. Now do you have any idea how to create a quicklink to the new windows settings? Can't find it for the life of me...
yes. noob here. All the *setting*.ink's i can find lead back to the sense settings, or handle different/specific settings entirely.
Click to expand...
Click to collapse
Same here. Would like to change some icons in standard WinMo Settings but can't find it in the Start Menu folder.
Hi, I've searched but I could possibly be using the wrong search terms.
Looking to change the text that displays in the banner where it would say AT&T 3G? I've seen it done just now can't find it.
Any help appreciated, thanks.
ccmxda said:
Hi, I've searched but I could possibly be using the wrong search terms.
Looking to change the text that displays in the banner where it would say AT&T 3G? I've seen it done just now can't find it.
Any help appreciated, thanks.
Click to expand...
Click to collapse
Check out the screenshot below...see the custom title in the top left under the start menu, is that what you're talking about? If so, the attached cab is what you'll need to put your own custom title there...just install and run it, it's nothing but a simple text box where you can enter whatever you're heart desires
Does this work on Windows Mobile 6.5? On any service carrier?
develop1 said:
Does this work on Windows Mobile 6.5? On any service carrier?
Click to expand...
Click to collapse
Yes, it's been used successfully on many different devices on many different carriers.
Thanks, that worked for the carrier name on the s2u2 lockscreen, but I guess Energy is doing something on the Today banner to override both the Personalizer and the Carrier.
ccmxda said:
Thanks, that worked for the carrier name on the s2u2 lockscreen, but I guess Energy is doing something on the Today banner to override both the Personalizer and the Carrier.
Click to expand...
Click to collapse
Gotcha, or is that Energy ROM 6.5.3? That may be the difference too....I know it works on 6.5, but I'm not sure about 6.5.3
sirphunkee said:
Gotcha, or is that Energy ROM 6.5.3? That may be the difference too....I know it works on 6.5, but I'm not sure about 6.5.3
Click to expand...
Click to collapse
This worked for me on 6.5.3 Thanks!!!
Any chance you can share your slider icons?
Doinshots said:
This worked for me on 6.5.3 Thanks!!!
Any chance you can share your slider icons?
Click to expand...
Click to collapse
They actually came as part of a theme, done by xda memeber s2w, you can find that theme on THIS page where he has a bunch, it's called "Dark Revised"
I have installed "Personalizer_3.1.cab" on my TP2 with orignal wm6.5 rom with sense 2.5...
But I can't finde shortcut named Personalizer in my Start Menu...
Can anyone tell med Step by Step what to do?
that screen shot you have
sirphunkee said:
Check out the screenshot below...see the custom title in the top left under the start menu, is that what you're talking about? If so, the attached cab is what you'll need to put your own custom title there...just install and run it, it's nothing but a simple text box where you can enter whatever you're heart desires
Click to expand...
Click to collapse
wher can i find that for my tp2 I really like your tp2 screen
bigboy38 said:
wher can i find that for my tp2 I really like your tp2 screen
Click to expand...
Click to collapse
Check out my post 2 above yours there... the look you're seeing is mostly due to a theme called "Dark Revised" by s2w, and it's available on that page I linked to along with several others he's done. The taskbar icons at the top are from Spike's popular MicNeo set, varient_V2 to be exact, I've attached the cab for that below.
If you are using the Energy Rom....
ccmxda said:
Thanks, that worked for the carrier name on the s2u2 lockscreen, but I guess Energy is doing something on the Today banner to override both the Personalizer and the Carrier.
Click to expand...
Click to collapse
That is a feature you can edit on the energy Rom. If you are using the one with cookie home tabs, all you have to do is go to the cookie home tab editor and go to advanced, at the very bottom is a choice to change the text that appears in that area. Just click on that box, and it will open the editor to change that text.
Hope that helps.
Perfect, thanks!
ccmxda said:
Perfect, thanks!
Click to expand...
Click to collapse
Glad I could help, mate.
0.4
it's a widget : add it to your deskop
tap on the clock the open the control menu
Resize this widget to something like 4*1
What's up ?
- VM heapsize tuning for better performances in big applications
- Wifi network SSID shows on the widget
- Change LCD density ( select new one and folio reboot with the new one, the trick is not permanent )
Like ever if you like click Thanks
I do this on top of my job so there's few chances i respond to personnal mp.
I'm sorry for the inconveniences but i'll try to read yours comments.
very good !
thank you !
any news for my requested app ? (shortcut to Account Sync)
Great!
Great job!
Thank you!
One question. How do I resize the widget?
Thanks.
Resize is only possible with some home like ADW. Launcher Pro require the paid version and with zeam you have to reinstall the widget
Widget resize
Hi,
All clear,
Thank you!
How can I change the color/layout, there most be any software I can use to extract the picture then save them? Tried winrar but that only gave me a ccorrupted apk. Help please?
statsminister said:
How can I change the color/layout, there most be any software I can use to extract the picture then save them? Tried winrar but that only gave me a ccorrupted apk. Help please?
Click to expand...
Click to collapse
yeah. a color/layout option would be nice.. transparency too, but i'm nitpicking =)
julio77 said:
any news for my requested app ? (shortcut to Account Sync)
Click to expand...
Click to collapse
that is much easier for you to do.
Shortcut -> activities -> Settings -> accounts? i think
Dexter_nlb said:
that is much easier for you to do.
Shortcut -> activities -> Settings -> accounts? i think
Click to expand...
Click to collapse
hum...
I already know this method, I am the author.
I am looking for a program to do that because I'd like to have the shortcut in the appdrawer.
Hi all,
another question :
is it a way completly disable sensitive button at the right of the screen ?
I'm using TNTMod and I don't need these buttons because there already at the top of the screen.
julio77 said:
Hi all,
another question :
is it a way completly disable sensitive button at the right of the screen ?
I'm using TNTMod and I don't need these buttons because there already at the top of the screen.
Click to expand...
Click to collapse
would a value of 255 (ff) not do it? at least make then incredible unresonsive or?
i will check the kernel registers if we got some other bit's to modify so we can disable them..
btw,
looks like Malata actually took Honeycomb 3.0 solutions into account here buttonwise.
Dexter_nlb said:
would a value of 255 (ff) not do it? at least make then incredible unresonsive or?
i will check the kernel registers if we got some other bit's to modify so we can disable them..
btw,
looks like Malata actually took Honeycomb 3.0 solutions into account here buttonwise.
Click to expand...
Click to collapse
Thank you, i will try this.
i've tried 0x0000000 and 0xfffffff and no effect..
maybe I need to reboot ?
is it a value to disable buttons ?
nobody has found a way to disable the Folio 100 sensitive buttons ?
Would it be possible to make the battery in the widget, give some animation?
disable hardware(soft) buttons completely hack
julio77 said:
is it a value to disable buttons ?
Click to expand...
Click to collapse
here is your fix , you asked for:
here is the command to disable light buttons completely (will enable after a poweroff)
DISABLE BUTTONS
Code:
echo regctrl=0x8800 >/sys/devices/virtual/input/input7/tegra_capsensor
ENABLE BUTTONS
Code:
echo regctrl=0x8801 >/sys/devices/virtual/input/input7/tegra_capsensor
Requested by user, not my idea here. but probably very handy with AndroidOS 3.0 when its out. (good for TntMod as they got buttons on screen)
thank you Dexter
Sol Ido, is it possible to add this trick in your next release ?
Any questions
HI,
I try to use FolioWidget with Official TOSHIBA ROM.
I install the widget, but :
when i tap on hour, Window of parameters open.
- where is the choice to set size of Widget to 4x1 ?
I select Light Enabled, but the Four keys are not on.
- what is the wrong ?
Sorry for py poor english.
CSE
cse34 said:
I try to use FolioWidget with Official TOSHIBA ROM.
Click to expand...
Click to collapse
app require "root", so no go for you...