Database Users

Onyx

This Theme has been built for ease of use and for all relevant Information always on view.
It is made up of Skins for:
Wisbar Adv3
Wisbar Advance Desktop
Tsk theme
Phone Dialler ( has all features included,smart dialling picture ID, etc)
Calculator
WMP
SPB Time
S2U2 ( skinned both clock sets )
It should be noted that any non generic calculators or phones should be uninstalled before applying these new ones and a soft reset after installation.
For a closer look go to
http://www.pocket-pc-visuals.com/OnyxP.jpg
All Downloads are at these url's
http://www.pocket-pc-visuals.com/Onyx.rar
http://www.pocket-pc-visuals.com/OnyxPhoneDialer.CAB
http://www.pocket-pc-visuals.com/OnyxS2U2.rar
http://www.pocket-pc-visuals.com/OnyxTime.rar

looks good.
Going to give some a try.
Edit: Can you convert your 2007 word document to a earlier release. I dont have Office 2007...yet.

bridic said:
looks good.
Going to give some a try.
Edit: Can you convert your 2007 word document to a earlier release. I dont have Office 2007...yet.
Click to expand...
Click to collapse
I didn't even think about that anyway here is the Text you need

GJ, looks pretty good

grzegorz10 said:
I didn't even think about that anyway here is the Text you need
Click to expand...
Click to collapse
Thanks, can you re-post the S2U2 instructions also.

bridic said:
Thanks, can you re-post the S2U2 instructions also.
Click to expand...
Click to collapse
Sure not a problem just had to make them up

Hey George,
Finally got my Tilt so I am in this forum now. WAD is locking up my device. WA3 is OK but once I start navigating through the pages in WAD, within two minutes I have to SR. Didn't want to do a clean install but may have to and let you know if the problem is still there.
Rgds

mcfarlan said:
Hey George,
Finally got my Tilt so I am in this forum now. WAD is locking up my device. WA3 is OK but once I start navigating through the pages in WAD, within two minutes I have to SR. Didn't want to do a clean install but may have to and let you know if the problem is still there.
Rgds
Click to expand...
Click to collapse
Hi to you to. I don't know if this is the problem but with the meter for storage car I've found that if you pull the storage card out it will throw WAD , so i just shut off if i need to remove the storage card. Other than that a rellocatin of that meter to read something else may be needed

GiZZy said:
GJ, looks pretty good
Click to expand...
Click to collapse
Tks for the words

Very nice Thankssssssssssssss. Can you psShutXP Skin make add more?
Sorry for my English

ancola66 said:
Very nice Thankssssssssssssss. Can you psShutXP Skin make add more?
Sorry for my English
Click to expand...
Click to collapse
Im not sure what you mean but this is not a psShutXP Skin. It's part of the WAD and is a proper Shutdown, Logoff and Soft Reset with button animation
something that can't be done in psShutXP, it's only a stagnet picture where this is not.

grzegorz10 said:
Im not sure what you mean but this is not a psShutXP Skin. It's part of the WAD and is a proper Shutdown, Logoff and Soft Reset with button animation
something that can't be done in psShutXP, it's only a stagnet picture where this is not.
Click to expand...
Click to collapse
Hi Gregory,
Is there a specific way to Cancel out of this? Sometimes I can get out of it but most times I have to turn off and turn back on. I think a Cancel option would be nice here...

mcfarlan said:
Hi Gregory,
Is there a specific way to Cancel out of this? Sometimes I can get out of it but most times I have to turn off and turn back on. I think a Cancel option would be nice here...
Click to expand...
Click to collapse
if your talking about the logoff page there is a cancel at the bottom

grzegorz10 said:
Im not sure what you mean but this is not a psShutXP Skin. It's part of the WAD and is a proper Shutdown, Logoff and Soft Reset with button animation
something that can't be done in psShutXP, it's only a stagnet picture where this is not.
Click to expand...
Click to collapse
I know, but I not use WA3 and WAD. I Want psShutXP Skin ( I use Canculator Skin, Dialpad Skin, SpbTime Skin and S2U2 Skin )

ancola66 said:
I know, but I not use WA3 and WAD. I Want psShutXP Skin ( I use Canculator Skin, Dialpad Skin, SpbTime Skin and S2U2 Skin )
Click to expand...
Click to collapse
Sorry I won't be making this psShutXP skin, theres just nothing to them.

good job !
but when I tap on "menu", nothing happen ... I can't see the other pages !

monamibouli said:
good job !
but when I tap on "menu", nothing happen ... I can't see the other pages !
Click to expand...
Click to collapse
Press and hold on menu then select properties, under Action should be Toggle Dock and under Control it should be Menu. If thats all as it should be, then have you put the folders as i instructed, both as they are into Themes/Desktop/ if you've put them any where else it would not work.
Let me know how you go as i really did make this as easy to put on and work as i could do

another LNK
all N 1 file
http://www.4shared.com/file/40219243/26f10b6e/Onyx.html

Thank you very much for your good job I like this thems so much

jakkrith said:
Thank you very much for your good job I like this thems so much
Click to expand...
Click to collapse
I'm Glad you like it so much it was built to be as user friendly as possible

UPDATED:Custom Manila Theme

I've been searching for awhile for the registry entry that controls the color of the selection highlight when you scroll thru different selections. An example would be when you scroll you start menu or contact and such.
Any help would be greatly appreciated!!
EDIT: Here is a link to most (all) of the registry entries for theme colors
http://wiki.xda-developers.com/index.php?pagename=WindowsMobile5Colors
Scroll down for Custom Manila cab file

I did this a long time ago with SKTools, but im sorry because dont know the registry key for this.

Thanks for the reply. I've since then managed to find it and was actually looking at the right key all along but for some odd reason my phone would not respond to that particular key change. Finally I decided to cab up the theme and install it with my registry edits and it worked great Now I have a Manila theme without the ugly green highlight. It's grey instead

Bump due to updated info...

lllboredlll said:
Thanks for the reply. I've since then managed to find it and was actually looking at the right key all along but for some odd reason my phone would not respond to that particular key change. Finally I decided to cab up the theme and install it with my registry edits and it worked great Now I have a Manila theme without the ugly green highlight. It's grey instead
Click to expand...
Click to collapse
did the HTC home icons you are using come with your theme? Where can I get just the icons? thanks!

nursemm05 said:
did the HTC home icons you are using come with your theme? Where can I get just the icons? thanks!
Click to expand...
Click to collapse
You can get those from the HTC Home Customizer app but I will zip them up for you and attach them to this post.

lllboredlll said:
You can get those from the HTC Home Customizer app but I will zip them up for you and attach them to this post.
Click to expand...
Click to collapse
thanks! I don't think they came with the version of HHC I have.

lllboredlll: may i ask what font you are using, and more importantly, how you were able to make the start menu font non-bold?

nursemm05 said:
thanks! I don't think they came with the version of HHC I have.
Click to expand...
Click to collapse
I'm pretty sure you download it within HHC. That's how I get it now even though I have the file on my PC. Are you running HHCv10final?
m.carroll said:
lllboredlll: may i ask what font you are using, and more importantly, how you were able to make the start menu font non-bold?
Click to expand...
Click to collapse
I extracted an OEM from PPCGeeks OEM package and tweaked it. The font setup is the same as it was in the manila theme pack but I changed the color.
Other than that, here's a link to the thread that explains some font changes.
http://forum.xda-developers.com/showthread.php?t=334781

lllboredlll said:
I'm pretty sure you download it within HHC. That's how I get it now even though I have the file on my PC. Are you running HHCv10final?
Click to expand...
Click to collapse
Not sure what I have. I'm almost positive it's final though since it's in the PPCGeeks kitchen. But thanks for posting it! It wasn't there.

nursemm05 said:
Not sure what I have. I'm almost positive it's final though since it's in the PPCGeeks kitchen. But thanks for posting it! It wasn't there.
Click to expand...
Click to collapse
That one is the final version. If you goto the download tab, click connect to download server. Once connected select Icons from the drop down menu then scroll down. It's right under all of the baseball sets.

[Manila] More Buttons in Program tab

Is there a way to get more Buttons in the Program tab?
I've tryed to add more button folders in registry:
[HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLauncher]
But the result is,
there are more buttons, but You can't use them
so is there something else I have to change?
Edit:
Added a Screenshot,
-> thats What I got.
but I can't add programs to the last 3 lines.

Use Manilla 2D Customizer (M2DC)
http://forum.xda-developers.com/showthread.php?t=427392
You can have a maximum of 5x9 = 45 buttons

But I have an HTC HD with Manlia 3D

thix sux =(

LewxX said:
thix sux =(
Click to expand...
Click to collapse
If you export and post the Regkey you mentioned above i'll try to have a look at it.

I've done at pocketpc.ch:
here is the link:
http://www.pocketpc.ch/touch-hd-twe...tabs-unter-programme-im-neuen-startmenue.html
I guess you'll understand that language ^^

LewxX said:
I've done at pocketpc.ch:
here is the link:
http://www.pocketpc.ch/touch-hd-twe...tabs-unter-programme-im-neuen-startmenue.html
I guess you'll understand that language ^^
Click to expand...
Click to collapse
Not just a little bit I will take a look there

Wondering
I added the registry entries to allow for more, this all seemed to work, clicked on a button to add the appropriate new link, comes back, no icon. I go into Diamond TF3D Config and can see that the entries are in there, but TFlow3D wont action or show the icons - very confusing, there must be something we are missing and my Swiss German is sadly lacking - any ideas?

mlk said:
I added the registry entries to allow for more, this all seemed to work, clicked on a button to add the appropriate new link, comes back, no icon. I go into Diamond TF3D Config and can see that the entries are in there, but TFlow3D wont action or show the icons - very confusing, there must be something we are missing and my Swiss German is sadly lacking - any ideas?
Click to expand...
Click to collapse
I guess as soon as there is a solution for that LewxX will post it

Sorry, fwt, I thought you and LewxX had solved this with the link to our Swiss friends... looking forward to any solution!

4 Rows in 6.5 start menu

I have just installed the official 6.5 WWE upgrade. I want to change the honeycomb start menu to show 4 or 5 rows instead of 3. I have installed a couple of options from searching here but they do not not seem to work. Can anybody help?

yeah i too would also like to know this, having 4 icons per row looks much better in my opinion, and doesn't take as long to scroll to the bottom!

Same here, anyone??

Here! These are all some I have collected over here in this forum. Enjoy.
LCW is 5 columns in a row.

Any way we can get links to the threads to see previews on what these will look like??

venomshot629 said:
Any way we can get links to the threads to see previews on what these will look like??
Click to expand...
Click to collapse
just tried them out:
Ark_Hexagon 4 row.cab - gave a honeycomb style (with honeycomb outline)
WM6.5 Start Menu 4 7.cab - didn't work for me (however didn't soft reset so thats probably why lol)
BharS StartMenu Grid WVGA.cab - Is exactly what we were looking for, 4 icon wide start menu!
Thanks ai6908!

cd993 said:
just tried them out:
Ark_Hexagon 4 row.cab - gave a honeycomb style (with honeycomb outline)
WM6.5 Start Menu 4 7.cab - didn't work for me (however didn't soft reset so thats probably why lol)
BharS StartMenu Grid WVGA.cab - Is exactly what we were looking for, 4 icon wide start menu!
Thanks ai6908!
Click to expand...
Click to collapse
You have to SR after install in order for it to work.
Ark and LCW are honeycomb versions. Others do not have honeycomb in them.
Sorry no patience for screenshots yet...maybe when i get more time...

ai6908 said:
:
I like the honeycomb versions.
:
Click to expand...
Click to collapse
Thanks!.. how about the Sense UI's "Programs"? Does it have working 4 columns cabs for it?

Thanks I was also looking for this. Are there any way of decreasing / increasing the size of the start menu icons?

radiowc said:
Thanks!.. how about the Sense UI's "Programs"? Does it have working 4 columns cabs for it?
Click to expand...
Click to collapse
i think u are looking for this. working perfectly for me.

stoutseun said:
Thanks I was also looking for this. Are there any way of decreasing / increasing the size of the start menu icons?
Click to expand...
Click to collapse
Yup it can be done. Edit the cpr files in the cab with notepad.

kartun7 said:
i think u are looking for this. working perfectly for me.
Click to expand...
Click to collapse
Doesn't works well, a bit out of line, i don't hink this is for WVGA.

ISO-8859-1__Showaco All_Programsv4.1_4ICON.cab
does not work for me with WM 6.5 Sense 2.1, icons and letters are cut.
Is there another tool/cab?

Is it possible to remove the Start Menu Wall paper totally, I like to have a plain black background. I have been searching and googling for it, but it seems that so far none has posted anything on it. Not for the TF3D2, but just only the Start Menu background.
Can it be done?

If 2018/2016 does not work for you, try my 2016/2017/2018 hybrid (link inside)

Here is my hybrid. It works but the menu on the hometab does not. If you are like me and can't get 2018 working, this will fix it.
Why am I sharing? Cuz I'm a nice guy
Link: http://www.fileserve.com/file/UhvCHJA

What do you mean the menu on the Home tab? That's a major problem my friend.
If you are talking about the main home menu button how are people going to get to Co0lies Home Tab settings Etc.
I would not call this a working set of packages.

bobsbbq said:
What do you mean the menu on the Home tab? That's a major problem my friend.
If you are talking about the main home menu button how are people going to get to Co0lies Home Tab settings Etc.
I would not call this a working set of packages.
Click to expand...
Click to collapse
This package is better than NO PACKAGE at all. Nothing else would run on my ROM except this combo. 2018 Core with 2017/2016 tabs works on my Rhodium Euro based ROM. If you want to share your WORKING package, please do. I can update the first post.
I was talking to another chef, and it seems the menu button not working is related to other EXT (apparently).

DJGonzo said:
This package is better than NO PACKAGE at all. Nothing else would run on my ROM except this combo. 2018 Core with 2017/2016 tabs works on my Rhodium Euro based ROM. If you want to share your WORKING package, please do. I can update the first post.
I was talking to another chef, and it seems the menu button not working is related to other EXT (apparently).
Click to expand...
Click to collapse
Menu in Home tab not working is due to the number of quicklink slots declared incorrectly. HTC programmers are a bunch of weirdo where their coding is a total mess.
For 2018, the Core package has a registry entry setting the quicklink slots to 16. However some part of the Home package have the number hardcoded. So if you change the number in registry, the menu would not work.
Btw, if you install CHT, you'll have no Menu problem because Co0kie takes care of this.

programatix said:
Menu in Home tab not working is due to the number of quicklink slots declared incorrectly. HTC programmers are a bunch of weirdo where their coding is a total mess.
For 2018, the Core package has a registry entry setting the quicklink slots to 16. However some part of the Home package have the number hardcoded. So if you change the number in registry, the menu would not work.
Btw, if you install CHT, you'll have no Menu problem because Co0kie takes care of this.
Click to expand...
Click to collapse
I am aware that CHT fixes the menu issue. Does anyone have any other solution though? Editing the registry will accomlish this? Thanks!

DJGonzo said:
I am aware that CHT fixes the menu issue. Does anyone have any other solution though? Editing the registry will accomlish this? Thanks!
Click to expand...
Click to collapse
If you use OBEO's version, you must set,
[HKLM\Software\HTC\Manila]
HomeShortcutNum = 0x0c
For other version,
[HKLM\Software\HTC\Manila]
HomeShortcutNum = 0x09

programatix said:
If you use OBEO's version, you must set,
[HKLM\Software\HTC\Manila]
HomeShortcutNum = 0x0c
For other version,
[HKLM\Software\HTC\Manila]
HomeShortcutNum = 0x09
Click to expand...
Click to collapse
That did not fix my home screen
My quicklinks are uneditable and my Menu softkey still does not work.
Any other ideas? Thanks

DJGonzo said:
That did not fix my home screen
My quicklinks are uneditable and my Menu softkey still does not work.
Any other ideas? Thanks
Click to expand...
Click to collapse
Btw, if you are mixing the Home package files from multiple builds, that would cause the problem you are having now too. As I said earlier, HTC hard coded some part of the code (across multiple files) for the slots number, thus causing the said problem.

programatix said:
Btw, if you are mixing the Home package files from multiple builds, that would cause the problem you are having now too. As I said earlier, HTC hard coded some part of the code (across multiple files) for the slots number, thus causing the said problem.
Click to expand...
Click to collapse
So there is no solution other than using 2018 home tab or CHT?
CHT is too slow to be an option and 2018 breaks landscape.
This sucks.

DJGonzo said:
So there is no solution other than using 2018 home tab or CHT?
CHT is too slow to be an option and 2018 breaks landscape.
This sucks.
Click to expand...
Click to collapse
Umm... edit the lua script?

programatix said:
Umm... edit the lua script?
Click to expand...
Click to collapse
That is what I'm gonna try next.
I just saw your post @ Mobile Underground. I don't roam Mobile Underground a lot but I'm gonna start doing it more often.
Thanks for the help.