hi, i've seen countless threads, and replacements for the touch pad/digitizer being broken, but little to no help for people like myself wanting only an LCD replacement, (which is located UNDER the digitizer) which i can't seem to find anywhere. can someone please direct me as to where i may purchase a replacement LCD (not digitizer) for my hd2? any help is much appreciated
102 views, no one able to help?
Related
hi. i have an 8125 and i was painting and fell from the ladder. i wasn't hurt all that much but the the screen on my 8125 cracked and now there is bleeding everywhere inside my screen.
does anyone know if i can replace the screen easily by myself or where i can even get a screen?
i think someone was going to sell me a broken MDA (screen good) and wondering if that screen would work for the 8125.
thank you.
Hi!
There was similar discussion some time ago:
http://forum.xda-developers.com/viewtopic.php?t=51395
Actually I broke my screen too this weekend I ordered replacement from ebay, such as this one:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140005879931
I am going to try to replace it by myself according to Wizard service manual. In my case only touch screen is damaged - not LCD, but it seems that these come as one unit. If I will find that these can be separated, I will have spare LCD part. In my case I have O2 XDA mini s - I do not know if lcd is the very same as in Cingular 8125 you have.
theorist said:
hi. i have an 8125 and i was painting and fell from the ladder. i wasn't hurt all that much but the the screen on my 8125 cracked and now there is bleeding everywhere inside my screen.
does anyone know if i can replace the screen easily by myself or where i can even get a screen?
i think someone was going to sell me a broken MDA (screen good) and wondering if that screen would work for the 8125.
thank you.
Click to expand...
Click to collapse
Gutted for you m8. Hope you manage to get hold of something cheap.
Update to my previous post - after much tinkering I was able to replace broken touchscreen of my mini-s.
Some notes:
According to Wizard service manual there are two LCD versions:
p/n 60H00032-00M - LCD Module, (LTP280QV-E01 Samsung)
p/n 60H00037-00M - LCD Module, (TD028STEB1 Toppoly)
It seems that these are not interchangeable but I might be wrong. I was trying to replace my 60H00032-00M with new 60H00037-00M (whole module with lcd & touchscreen), however it did not work - LCD switched on but was all white. Then I managed to separate touchscreen from new module and replace it with my broken one. Seems that it is working now. It is possible to replace just touchscreen but care must be taken not to break it and some very fine soldering must be done.
To theorist - if you want to replace LCD by yourself you should check for exact part number of your LCD and find similar one - that should work.
So now I have spare and useless for me 60H00037-00M LCD Module (LCD only without touchscreen) that probably is in working order as I suppose that it is just not compatible with my mini-s.
In the US, HTC America can fix it. http://forum.xda-developers.com/viewtopic.php?t=49361&highlight=
Hi, my o2 mini s touch screen just stop function after i accidentally splash some water on the screen. Wondering anyone has similar experience? Please advice I can just change the touchscreen (which I can get from ebay easily) or there might be some damage to the chips inside?
buy from ebay a new screen.
check before you are bidding that the screen
come with tool to exchange the screen...
but is it really the screen problem or the chip insides might damage?
Hi friends,
I've broken the digitizer of my Qtek S100 and I was wandering if it was really possible to replace ONLY DIGITIZER without LCD, since it still works perfectly, just the glass of touch screen is cracked and in the upper area of the display is difficult to digitize.
I read over the net that somebody has separated the two components, and I find plenty of offers for the only digitizer, but e.g. without instruction and adhesive film to put between LCD and Digitizer.
Once for all I'd like to understand if it's possible or not and, in affirmative, if somebody has really done this and if this superboy can explane me/us how to do.
I think there's a lot of Magician/Qtek S100 owners in my same situation, since it's very common to break the touch screen.
P.S. I broke it in the worst way it's possible, since I was trying to pull some air bubble out of the screen protection film...I pressed too much and...that's it. So...BE CAREFUL WHEN DOING EVERYTHING WITH YOUR DISPLAY !!!
Thank you all in advance.
no answers...
Hi, I see that 190 peoples have been interested to my question, but no one has posted any reply... Is it possible that nobody can give US an answer ?
This question should have been asked on the magician accessories thread and not in here...
anyway, if you want a digitizer, buy one on ebay. There's alot of people selling digitizers for the magician.
Regards,
Keeper
After obtaining a replacement touchscreen for my Touch HD; (no problem, $45 Australian ex Hong Kong) and after much searching, can still not find any reference to replacing the screen only. Can it be done or does one have to dismantle the whole thing as demonstrated in the service manual? It looks as if the touch screen and LCD screen are glued or taped together, but presumably can be separated. Has anyone managed to do this repair? Just need a few more clues as to it's feasibility. My screen is merely cracked due to pressure. All still functioning. This is obviuosly not a unique problem, but the answers are elusive.
heres the service manual, hope be helpful....
enjoy..
http://mikechannon.net/PDF%20Manuals/HTC_Blackstone_Service_Manual.pdf
manual
Thanks for trying but as mentioned, I have the manual and its does not help. The question remains, does anyone actually have experience of replacing the screen?
Himalaya have two different Main Board?
I have two O2 XDA II, first one with broken LCD and the second one with broken LCD's connector. When I try to combining them, I found that the main board is different.
First one have LCD with P/N : 60H00022-03 and the second one have LCD with P/N : 60H00011-00, that's mean the main board series is different also.
I read the manual service, and it said the P/N is : 60H00011-00. Is that true that Himalaya published with two different series?
Please help me...
Hi all,
I've the following question.
My screen cracked with the LCD.
Now i see on ebay different kinds of lcd. So far i know is that the solder type screen is meant for the EU version and the no solder are for the TMOUS...
Or am i wrong?
I dissambled my HD2 and i saw that my LCD+digitizer is the no-solder part.
Can someone provide me the part number of that or those two parts (LCD + Digitizer).
I want to buy the correct screen.
Thnx in advance
there is some good info in this thread http://forum.xda-developers.com/showthread.php?t=1219130