Does anyone know of any other reasons why my mt3g would still hang on the splash screen?...I tried everything from flashing the 1.33.2005 spl to un-rooting then re-rooting, and nothing seems to work. I can only flash certain ROMS like cyanogen (really only cyanogen!). I tried wipe data and that doesn't help. I've partitioned my sd card all kinda way, I even tried just having it fat32(which is the only way cyanogen will work) . I cant flash super d, any hero roms, nothing. Every time I flash a rom my phone get stuck on the mytouch logo. I just unrooted then re-rooted so my spec are:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
I have a 8gb class 4 sd
anything that im not doing correctly?..thanks
did you get this to work yet?
I had this same problem when I was trying to tweak a few ROMs. Basically, I narrowed it down to a couple possibilities.
(1) The core DRC83 build that I was loading was corrupt. That was a problem
(2) I didn't repair the ext's after installing the core and rebooting to load into the phone. Basically, I am saying that when you flash, you need to reboot and load up every time you flash something.
(3) the ROM's that I was trying to use weren't complete (I had this when I made some changes myself, as well as ending up with corrupt/incomplete ROM's).
Otherwise, there is no reason for it to hang if it is rooted properly. good luck
BossLady said:
Does anyone know of any other reasons why my mt3g would still hang on the splash screen?
Click to expand...
Click to collapse
If you connect your device using USB and run "adb logcat" in a command prompt window while booting you will see why it is crashing, post the results of that here (or do a google search on the error) and you may get a little further.
I find usually this is because the rom expects to find certain partitions on your SD card that don't exist, but there are lots of reasons why it could be happening.
Related
I rooted my MT3G early on using the goldcard method - it is currently running the RAv1.1.0h rom from the original rooting thread. It has the 1.33.2005 SPL and the 3.22.20.17 radio. In fastboot I can see that it the SPL is an HTC version (I think that is what PVT 32B ENG S-OFF H means, right?).
I'm having trouble moving to a 32B rom, and no matter what I try, I can't get the damn recovery image to switch from the current RAv1.2.1H to the G - which is (I assume) why I can't install any 32B roms.
Any foolproof way to change my recovery image from H to G? I've followed all the steps listed on how to do this in Fastboot and using ADB to switch it over, but no matter what I do, it has no problems booting correctly with an H recovery image, but not with a G.
Any 32B roms just makes the phone hang at the splashscreen, so I know it's a rom issue.
OR - Am I missing a step here - is there a different spl I need in order to get my MyTouch 3G to think it is a G edition again. OR easier yet, should I stop whining and just find a reliable 32A rom that works on it (assuming something without too much HERO stuff?).
YES - I searched everywhere, I spent countless hours on it, but I can't help feel I've missed something really stupid, so feel free to call me names and point out the obvious (just don't say "try Google).
Are you still able to use flashrec? If yes try to flash this one>> cm-recovery-1.4 works fine if you want 32B roms. Enom uploaded latest version yesterday.
http://forum.xda-developers.com/showthread.php?t=549754 nd if you want version prior to this then go to http://www.4shared.com/file/129108782/3953f016/HTC__crc1__Android_rooted_Rom_32B_TMobile.html
unzip and make sure to install one after the other. Large one first and rename as update ,put in your sd card. Once that is performed then go to the next small one about 14mb. Rename as update and put it in sdcard. Dont forget to delete the large one if already there.
Let us know how you go on.
No - Flashrec won't run since the rom I'm currently using has the exploit patched.
Good tip though, thanks! Any other thoughts on why I can't get the 1.2.1G recovery image on my phone? Or an alternative way to get it to install?
EDIT: Took a few steps back, installed the sappimg for the MT3G, then did flashrec and then did the update with the rom you posted. Thanks so much for the tip and inspiration!
Yes, well done.Thanks for letting us know.And yes flashrec wont work on these rom also. I tried many times to flash with RAv 1.2.1image but it seems it was not possible. I asked emon in his T Mobile rom thread where he gave me a tip as to how to go about RAv.... but that hasnt worked.
But there is a solution if al you want is to make 3 partitions.
I followed Paaragon method as described on http://forum.xda-developers.com/showthread.php?t=512873
and it worked. So try that.
I tried many different roms and finally settled on enomther's
because it is very fast, not too cluttered and just perfect for 32B boards. And further more, there isnt anything that doesnt function.
PS: I prefered the one prior to current as on 4shared. But thats personal.
unroot completly by re insttalling the saphimg and go with the oneclick root method from the unlocker thats what i did and TITS! perfict running hero and full 32 b envierment raido and roms ... be carefull with the 32 a 32 b mixup could be the end of your touch....
Let me explain to you the whole story. I obviously know im going to get flamed for this one. I will give you the short short version
I had a rooted MT3G fender with this Rom installed
http:/forum.xda-developers.com/showthread.php?t=669911
It worked all good until i started messing with stuff. I wanted this rom installed
http:/forum.xda-developers.com/showthread.php?t=673394
Since it said 32a and MT3G fender is 32a i assumed that it will install and no problems. So i used the gold card to change radio and spl to the 3.22 series. only to find out that they dont work for my phone. based on this post
"You are now screwed with a downgraded SPL and radio that do not work on this phone YAAAAAAY." -crypysmoker-
[THUNK AND FIXED] Rooting Mytouch Fender LE 32a/ Mytouch 1.2 DONT!!
http:/forum.xda-developers.com/showthread.php?t=622530
So now im thinking great i didnt catch that so let me just move back to where i was before. using the last section of that previous thread to install the stock radio and spl. i have done this already and know it works. so i install the stock radio and spl and the custom recovery. Boot up into recovery and restore nandroid. everything is going ok utill.....it locks up in a boot loop. i then boot back up into recovery and erase data. after that i tryed another nandroid restore and to my wonderful surprise i now lost the ability to mount the sdcard. i restarted and tryed many different cards and all failed. I then boot up into hboot restore with the goldcard and it then locks up at system.
Great now im looking for something to fix this whole mess. after that i try to reinstall the original spl and radio. I then have an error "signature verify failed." Now im thinking WTF!!!!!
I then find a thread about the RUU and how to turn off "S-on" if i install this official HTC app. However come to find out its the asia version. WONDERFUL FOR ME!!! I then found the Official T-mobile MT3G RUU, installed it and now i have a fastboot installed with a memchip with a red circle around it, not the 3 skate droids, and cant boot into HBOOT ,with the volume down button. All that i see is "RUU USB." I have adb but now get the error "remote not allowed." it used to be "signature verify failed." i have no recovery, no HBOOT, just fast boot with RUU USB.
How to i fix this mess up and get back to this?
T-Mobile MyTouch 3g Fender Edition Stock ROM with ROOT!
http:/forum.xda-developers.com/showthread.php?p=5451898&posted=1#post5451898
This is what i have and show
Sapphire pvt 32a ship s-on G
Hboot-1.33.0013 (sapp31000)
cpld-13
radio-2.22.23.02
oct 21 2009,22:33:27
RUU USB
This is definitely a snowball effect right here.
Oh also i cant go and exchange the MT3g fender because im past my 14 days and i already did it on the first day. LOL
I actually am stuck on the same screen with the same phone. I hope someone has been able to get this fixed
Damn, not trying to be mean, but you screwed up a lot.
I have the same version device as you, and I upgraded my radio/SPL. and did a lot of stuff, i semi-bricked it, but i got it working again. I suggest you re-root your whole entire phone. including flashing all the radios, spl,recovery, and etc.
Try following this theunlockr[DOT]com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
The problem is that the phone is stuck in a bit of an interesting state. You can't flash from an RUU at this point because the engineering SPL used to root the phone is version 2.53.x, while the RUU's ROM is 2.10.x. You also cannot flash any images to the phone because the SPL is locked (S-ON). So the only way to fix the phone at this point would be to somehow get an HTC-signed 2.53+ ROM for the SAPP31000 (mytouch 3g 1.2/fender) or find a way to unlock the SPL. I had a nice chat with some of the Modaco guys and we went through a lot of options with none of them working. The phone's basically in a bit of a chicken vs. egg state. So personally, I will be building a serial cable to manually unlock the SPL so that I can flash images back on manually.
So, while I wish it was as easy as just re-flashing the phone, you can't do that with a locked SPL and no HBOOT mode available. Onward to a serial/TTL cable advendure!
Once I get the parts in to build it, I'll follow up here with my results
shintokun said:
I suggest you re-root your whole entire phone. including flashing all the radios, spl,recovery, and etc.
Click to expand...
Click to collapse
Hey guys, I have spent the last 8 hours trying to figure this out.
I have a MyTouch 3g 1.2 and I want to root it and install Cyanogen's new ROM. I have been following the rooting guide from TheUnlckr.com.
I am able to complete everything fine (I needed to substitute the sappimg for the Sapphire one to make it work), but it finally completed.
When I go to fastboot with SDK, I can see my device, so everything looks fine. However, when I go to flash the radio, hboot, and recovery images, I get a error that says:
Code:
C:\AndroidSDK\tools>fastboot flash radio radio.img
sending 'radio' <21504 KB>...FAILED <remote: not allow>
finished. total time: 0.016s
This is the pattern for each of the files I try to flash...
This is where I'm at, and I haven't even gotten to flashing the ROM yet. So, I currently just have a stock device. Can someone please help me out?
I tried using the following sappimg:
2.53.707.2_-_sappimg
SAPPIMG_Sapphire_T-Mobile_US_2.10.531.4_release_signed
the following SPL:
update.Engineering-SPL-HBOOT-1.33.2010-signed
the following recovery images:
recovery-RA-sapphire-v1.6.2G.img
flashrec-1.1.2-20090909.apk
flashrec-1.1.3-20091107-2
flashrec-20090815
I'm clearly all over the place now. Someone please point me in the right direction. I tried several different ways to fix it, but none of them worked. The most reason I tried was the method of using the flashrec to flash a recovery image while the phone is on, instead of fastbooting it. That didn't work because it kept saying it was the wrong image for the phone.
Thanks in advance guys. And believe me, I've been searching and searching.
Dane
before you can flash anything with fastboot, you have to shoehorn that engineering SPL into the phone somehow (probably have to make a goldcard, but I don't know for sure on the 1.2 mytouch)
which rooting guide are you using? (there are many different ones on unlockr, some of which are terribly obsolete)
also, flashrec isn't a recovery image, its a one-click rooting app that only works on android 1.5 (pretty sure the 1.2 mytouch only runs 1.6)
adavis159 said:
before you can flash anything with fastboot, you have to shoehorn that engineering SPL into the phone somehow (probably have to make a goldcard, but I don't know for sure on the 1.2 mytouch)
which rooting guide are you using? (there are many different ones on unlockr, some of which are terribly obsolete)
also, flashrec isn't a recovery image, its a one-click rooting app that only works on android 1.5 (pretty sure the 1.2 mytouch only runs 1.6)
Click to expand...
Click to collapse
This was the guide I was using. (I can't link to outside sites, so I'll just copy it as text) http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
I also successfully created a goldcard, and installed all the ADB stuff. The part that's hanging me up is the flashing of the recovery image via fastboot usb.
I'm so close! I have successfully rooted two other mytouch devices, but they were not the 1.2 version.
Any more help would be great!
Dane
danegerous said:
I am able to complete everything fine (I needed to substitute the sappimg for the Sapphire one to make it work), but it finally completed.
Click to expand...
Click to collapse
what "sapphire" image did you substitute? and what happened when you tried to use the sappimg that they gave you in the instructions?
When I tried using that image, it just said "wrong file for this phone" or something like that. I know the goldcard was done right, though, because it works with another sappimg. I'm trying to follow cryptsmoker's guide now. I'm going to try and use the engineering img/SPL now. We'll see how it goes.
Ok, now I'm getting frustrated.
Here is my info:
Sapphire PVT 32A Ship S-on G
Hboot-1.33.0013 (Sapp31000)
CPLD-13
RADIO-2.22.23.02
Oct 21 2009
I just got the Model ID incorrect!
Update Fail!
This happens with every sappimg I use except T-Mobile 2.10.531.4. I'm sure that's the stock one, so that's probably why. I'm just so ticked.
To clarify again, After I hboot the sappimg, I reboot and instead of being taken to the Magic screen, I'm taken to a standard MyTouch splash, then Android splash, then MyTouch setup screen. My touchscreen works the entire time. Is this because I basically just reinstalled the stock ROM?
I just can't seem to get ANY other sappimg to work beside the stock one. I've used three different goldcards and all of them work the exact same way.
Please help!
Dane
yeah, you are just reinstalling the stock files (stock SPL and radio)
just because the t-mobile sappimg works doesn't mean you made the goldcard right.
the point of the goldcard is to trick the phone into installing a non-stock sappimg, you could take a brand new SD card, put the stock sappimg on it and you would still be able to flash it using vol-down+power
open the goldcard.img in HxD and make sure it contains all the lines (including all of line 170), if it doesn't then you need to start over from the beginning (get cid again, reverse it again, get a new goldcard.img)
If goldcard.img is ok, open the sd card in HxD again and make sure all of the first 170 lines of the sd card match the goldcard.img
also, some SD cards just don't work for making goldcards. I used a lexar 1gb, and kingston 2gb cards are reported to work
I didn't paste over the entire 170 line while making the goldcard. I used the "select" feature and chose 0-170...that could be my mistake. Here we go again!
I actually never got this to work the first time. I was really excited since I heard I would be getting the T-Mobile update soon, but then I read a little further and saw that the 2.1 is not yet included...so, I will be figuring this out today, mark my words!
Wish me luck!
Dane
I had a similar problem and it was the goldcard. Although I had made the goldcard and it worked before, using the same goldcard I get the same error message as you. I made a new goldcard and it worked flawlessly to flash using fastboot. Make sure you are using one of the brands that are know to work.
OK, new problem now. I installed everything and got it all to work. I actually had the stock cm rom working (an out of date version from the unlockr). Well, I tried to update and I started by flashing the 6.35.16.19 radio. Apparently that worked but now nothing else will.
In the HBOOT screen, I see this:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-6.35.16.19
Oct 21 2009,
Every time I try and update the Sappimg file, I get stuck at the updating phase of the radio_v2 portion. Please help guys, I don't know enough about this to figure it out and it's really killing me!
I figure I need to get back to the stock radio I started with (3.22 or whatever), but I can't. Even when I try to flash the radio in fastboot, it takes way too long and never finishes.
Your speedy replies are greatly appreciated.
Thanks
Dane
Got your pm.
Facts: STOP MESSING UP YOUR DEVICE.....
You are working in the blind... mixing bad spl and radio combos.....
So STOP what you doing and read and understand before you continue.
You can't just take any sappimg.zip and apply it... I has complete partitions layout... like the spl, radio, recovery ect...
So if you take whatever you find on the net and apply it, you will **** your device up... just like you did now...
Having the 6.35 radio and a perfected 1.33 spl... Just bad for business!
What is your current status:
Access to adb?
Access to fastboot?
Access to recovery?
Access to rom/system?
Also post fastboot info...
Then we can take it from there :0)
And for gods sake... STOP flashing stuff.
I have access to adb, fastboot, and hboot. No ROM/system or recovery.
Clarification: Since I cannot access the system of the phone, I do NOT have access to ADB. I cannot see the device when I type in 'adb devices' within the AndroidSDK\tools path.
Fastboot info:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.76.2007 (SAPP31000)
CPLD-13
RADIO-6.35.10.18
Aug 21 2009
The radio used is: Radio_HTC_PVT_32A_6.35.10.18.img
the hboot: hboot-1.76.2007.nb0
the recovery: recovery-RA-hero-v1.6.2.img
I have since tried to go into one of your other threads and at least match up my SPL/Radio combo. Any and all help is greatly appreciated.
OK.... you are now in a god situation...
You have a good combo and eng spl...
We can work with this....
1) boot into fastboot
2)download the fastboot commander (magic).... check my signature
3)start the tool... does it print the device info?
If yes, do this:
Go to the magic 32A tab.
Push "flash old".
IF all successful, then go to "misc" tab and push "reboot device".
When device has rebooted, push "print device info".
Now copy all text and posted here...
IF you get ANY errors... DO NOT REBOOT, DO NOT CLOSE THE TOOL...
Just take the output + the content of the "actual tab" and post here....
Again, IF you get ANY errors... DO NOT REBOOT, DO NOT CLOSE THE TOOL!
If the tool does not print the device info, then post here...
mumilover said:
ok... don't do **** until i post back here... give me like 15 min.
Click to expand...
Click to collapse
I'm seriously just sitting here waiting. Thanks a ton. I'll buy you a beer.
just updated my last post
look up :0)
Now i'm the one waiting :0)
Sorry, my battery died, I'm running around to trying to piece everything together. Here I go...
Just do what i wrote.... Read, understand, read, understand, execute.
Hello...
Fairly new here...
Also new to this rooting/rom business...
but, to the point.
I have a Rogers Magic 32A, with the stock Rogers rom.
my fastboot specs are
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76. 0010 (SAPP50000)
CPLD-12
RADIO-6.35.10.18
Jan 14 2010, 00:14:58
I am using the universal androot app, and running ROM Manager.
Whenever I boot into recovery, it either freezes after a few seconds, or resets the phone back to the first splash screen, and continues to work as normal (no bricking or any of that jazz.)
So anyway, my question is...
Does anyone know why it's doing this?
I got it to flash Cyanogenmod 6.0 once, but it didn't actually install.
Do I need a different radio and SPL?
I've tried searching, and I found nothing... but if there is already a thread with this issue, I'll gladly revert to that, and delete this thread.
TL;DR
-Phone is involuntarily restarting when I go into recovery mode
-Running stock Rogers rom, ROM manager, rooted with universal androot app
-New to android customization
-Am I doing anything wrong?
Thanks for reading.
I have the same problem!!
What I can do to fix it?
I'm really scared ...
the problem likely is you are loading the ebi1 recovery (magic 32a running 3.x radio) on you "hero like" magic (magic 32a running 6.x radio)
The hero recovery will work but you may find few roms.
I'd reccomend these rooting instructions
The process will work from the top I believe but since you ran androot after placing the files onto the phone you can skip to where I run exploid (with the seceetlol password) and run 'su' instead of exploid.
Once you have a 3.x radio with working rom and recovery if you want to checkout rom manager you can hopefully with less issues and if an issue happens you can always flash a recovery via fastboot.
I did end up fixing my issue.
Great Big Dog on the androidforums helped me out...
I tried to look for my thread that I posted on the androidforums, but I guess it got deleted...
pretty much... I followed GBD's quick root guide for the post 911 update for rogers magics, with a tiny bit of a switch for flashing the amonRA rom.
I can't remember exactly what it was, and I really wish that thread didn't get deleted.
And I can't link in any posts, so I can't really help you out.
I usually always just suggest installing a fresh RUU, especially if you don't know what you're doing... like me.
you can probably find one on the htc website.
Hi,
I am not all that new to rooting / flashing i've had a lot of experience but i think i've made a school boy error.
I rooted a HTC Magic last night and added the 1.5 Hero Rom.
this morning i looked for a later ROM and i found one from the unlockr.
the issue with this was that it required a radio flash. My 32B Magic is now flashed to 32A and i cannot even get into recovery mode OR re-flash the radio.img i had originally through fastboot.
Upon boot the Magic just comes up with the Mytouch 3G spash screen and nothing else.
Details:
Rooted using gold card method, fine.
Hero rom installed: fine.
Updating the ROM however, the radio was flashed to 32A and now i cannot get back into recovery mode.
Is there anything i can do? has anyone seen this before? I really don't want to keep using the motorola dext, sorting this magic out will make me happy.
Please help.
thanks.
you cant go in fastboot mode???
[edit]No, I can get to fastboot, i can get the opening my touch splash up but nothing is working from there. i've tried the arab rom but i can't get my pc to recognize. there has to be a way to flash this back...
[edit] update - Attempted to flash stock 32B Radio to get rid of the 32A that i think's causing the issue - fastboot flash radio.img... Sends radio OK but hangs on Writing radio, I get a black screen on the device. didn't work.
I don't want to ruin the mood any more than it is now, but I did practically the same thing; flashed 32B radio onto 32A Magic, and it was unrepairable in my country. Sold it for parts a few weeks later and got another one.
No fastboot, no boot at all, nothing. All that I was able to get was the blue led mode (trackball + power), and the only repair method was JTAG, which wasn't available to me.
That sucks.
From what I can gather this very well might be dead but everything I can find tells me as long as i can get into fastboot there must be something i can do.
At the moment I can use fastboot and HBOOT but i'm unable to get to a recovery or flash a stock radio.
so far i've tried every recovery/radio i can get my hands on. Hope i'm missing something and somebody is able to help.
flashing 32B to 32A does make me feel a bit spastic to be honest. it's a mistake I can never repeat with anything!
http://forum.xda-developers.com/showthread.php?t=754565
Try posting your thread again in the correct section.
EDIT: Tis the season and junk. I was about to move this to the TRASH but I took pity on you. I moved your thread to the correct section but the next new post that you create in the Development section that isn't related to development will be trashed. Final warning.
Appreciated, My bad. It's been a long and overly tiring day.
Info if it helps:
Sapphire PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
RADIO-6.35.16.19
Tried flashing official rom, nothing.
I got ID Failed, same when i try usinb sappimg in hboot.
radio now half installs but failes on ID.
Felt i'd add to this in case anyone has any ideas.
cheers.
Hi,
I recommend that you download this switcher (http://forum.xda-developers.com/showthread.php?t=794450&highlight=eyegor). Only to use the files (HBOOT, RADIO and REVOVERY), again ONLY because of the files.
After download reboot on fastboot mode and flash: HBOOT, RADIO and RECOVERY, using this sequence.
Good luck,
I'm not sure if this will deal with 32B Magic that's been flashed to 32A but i'll give it a shot. thanks.
Unfortunately there was no luck with that or the Arabic RRU, The GUI Switcher method to flash the radio failed, now phone won't even turn on.
If it wasn't a brick before, it sure as hell is now. i'll chalk this one up as a mistake i think and just be more careful in future.