Database Users

WM6 Losting Radio Signal

Every time when I reset my BA, when the BA starts the signal is lost. If I open the Phone Settings/Network and I find for network a error message is showed. I need to do a hard reset to the signal back. I´m using WM6. If I upgrade my radio to the last version find here (1.15) this problem will be solved? I´m in Brazil using TIM. Tks,

you can try and tell us
which radio version do you use?

I´m using now 1.13.
I´ll try install radio 1.15 .
Tks,

Same problem...
Hi Daniel.. I have the same problem.
My radio version is 1.06 (yes...it's older...).
I live in Brazil too...
Sim, tambem sou brasileiro, meu chip é da claro.
Até agora tá um porre pra reconhecer o chip.
Migrei pra wm6 ontem e vou tentar a versao 1.50.
Qualquer coisa, é só falar, de repente podemos trocar umas figurinhas.
Abraço.
Rodrigo Pelosini
[email protected]

SX66 with the same problems in BRAZIL
I'm having this same problem in Brazil.
One interesting thing I found out is that when my SX66 is powered via cradle and I soft-reset it, it finds the TIM (1800 mhz) signal.
If I soft-reset using only the battery, it sometimes finds the signal, but most of the time it finds the VIVO (850 mhz) signal only.
I had the same problem with the WM5, so I was using WM3.
Regards.

I'm using Radio V.1.12
So far so good
U can Try with this is Radio

Hi Brazilian friends,
After update the radio version to 1.15 the signal was better than with 1.12 version, but sometimes still have the problem that lost signal and only with a Hard Reset come back to work.

HELP please!!
I have a problem... a big problem.
My rom radio version is 1.06, yesterday I try update my radio rom to 1.15 and have problem... Don´t make apply this update.
HELP me, guys!!
Rodrigo Pelosini
Brazil - São Paulo - Operator GSM: CLARO
Qtek 9090 (Blue Angel) - WM6
ROM RADIO 1.06
[email protected]

Rodrigo,
Add me on MSN .... to I help you.

ajie said:
I'm using Radio V.1.12
So far so good
U can Try with this is Radio
Click to expand...
Click to collapse
Are u in Brazil too? Wich carrier do you use (frequency)?

didibrazil said:
Are u in Brazil too? Wich carrier do you use (frequency)?
Click to expand...
Click to collapse
I'm Live in Indonesia Bro

using 1.15 for long time now... but the problem is there...
sometimes the phone goes into searching.... mode and does not connect back to the network.
earlier switching off/on radio worked fine..
but with the comm manager ... i can switch off phone but can not turn it back...
have to perform a soft reset...

I am having the same problem too. Using 1.12 radio. Tried 1.13 and 1.15, there are bad.
Few times a day I still have the problem where phone cannot wake up to receive phone calls or failed to make outgoing calls.
I believe it is not the signal issue, something to do with phone apps to constantly wake up for calls.

Hi Brazilians members..
I'm brazilian too.. and i upgraded my BA to WM6 at last week.. my version of radio is 1.13.00 and my operator is Oi, and i'm not passing for this problem.
If I can help you... SCREAAAMM... rs,rs,
Bye

[Last: 3.34.90] [Poll] Artemis Radio Roms (GSM Upgrade)

Hello,
I've decided to make this thread regarding the Artemis Radio ROMs.
Made a compilation of all Radio ROMs that i found on this site.
I will try to always update this thread according to the new ones availlable.
Allways remember that new Radio ROMs aren't allways better that the older ones. You have to try them out and see if it "fits" to your using.
Artemis Radio 02.88.90
Date: 11-06-2007
Thread: http://forum.xda-developers.com/showthread.php?t=311439
Direct Download: ftp://xda:[email protected]/Artemis/Radio_ROMs/ARTEMIS_Radio_02.88.90.zip
Artemis Radio 02.93.90
Date: 12-06-2007
Thread: http://forum.xda-developers.com/showthread.php?t=311508
Direct Download: ftp://xda:[email protected]/Artemis/Radio_ROMs/ARTEMIS_Radio_02.93.90.zip
Artemis Radio 02.94.90
Date: 10-07-2007
Thread: http://forum.xda-developers.com/showthread.php?t=316292
Direct Download: http://forum.xda-developers.com/attachment.php?attachmentid=43403&d=1184071188
Artemis Radio 02.95.90
Date: 02-08-2007
Thread: http://forum.xda-developers.com/showthread.php?t=320802
Direct Download: ftp://xda:[email protected]/Artemis/Radio_ROMs/Artemis_radio_02.95.90.zip
Artemis Radio 02.97.90
Date: 31-08-2007
Thread: http://forum.xda-developers.com/showthread.php?t=326639
Direct Download: http://www.tom-love.net/Rom/Artemis/ARTEMIS_GSM_UPDATE_ONLY.rar
Artemis Radio 02.98.90
Date: 11-09-2007
Thread: http://forum.xda-developers.com/showthread.php?p=1502630
Direct Download: http://rapidshare.com/files/55040068/Artemis_2.98.90_gsm_radio.zip
Artemis Radio 3.06.90
Date: 06-05-2008
Thread: http://forum.xda-developers.com/showthread.php?t=390486
Direct Download : http://www.4shared.com/file/46662601/36fa2ba7/O2_RUU_Artemis_Radio_030690_Ship.html
Artemis Radio 03.07.90
Date: 07-11-2007
Thread: http://forum.xda-developers.com/showthread.php?t=342807
Direct Download: http://rapidshare.com/files/138991226/03.07.90.exe.html
Artemis Radio 03.08.90
Date: 04-03-2008
Thread: http://forum.xda-developers.com/showthread.php?t=374430
Direct Download: http://www.4shared.com/dir/4683106/f46fc6a0/sharing.html
Artemis Radio 03.12.90
Date: 30-03-2008
Thread: http://forum.xda-developers.com/showthread.php?t=381082
Direct Download: http://rapidshare.com/files/138990118/03.12.90.exe.html
Artemis Radio 03.18.90
Date: 21-04-2008
Thread: http://forum.xda-developers.com/showthread.php?t=386854
Direct Download: http://rapidshare.com/files/148032272/03.18.90.exe.html
Artemis Radio 03.21.90
Date: 31-05-2008
Thread: http://forum.xda-developers.com/showthread.php?t=396407
Direct Download: http://rapidshare.com/files/135640837/03.21.90.rar.html
Artemis Radio 3.34.90
Date: 01-11-2008
Thread: http://forum.xda-developers.com/showthread.php?t=397939&page=7
Direct Download: http://www.megaupload.com/pt/?d=J0PL5PMO
[NO GOOD] Artemis Radio 3.39.90
Date: 18-01-2009
Thread: http://forum.xda-developers.com/showthread.php?t=374430
Direct Download: http://www.4shared.com/file/81253671/8f3ec902/ARTEMIS_RADIO_33990.html
You have allways to run USPL first (If you are not CID unlocked yet).
See here: http://forum.xda-developers.com/showthread.php?t=311403
Note: If you have a SDHC card, remove it before you flash.
If you want, share with us with your experience, for what is the best Radio ROM for you.
And vote in the Poll.
Cheers

Moderators, please move this topis to Artemis upgrade please...
Sorry for the mistake...
*MOD EDIT* Thread moved.

Well since today I'm using 03.18.90
Can't really tell at this moment which on is the best.

I'm with radio 03.18.90 at the moment. I only have it for two weeks, but i notice even less battery drain. For reception and all connections, all working perfectly. I'm very impressed.
I had before:
03.07.90 - I think it was good in GSM and battery drain. No probs at all
03.08.90 - Didn't liked it. Too mutch battery drain, but also good in reception
Cheers

Pues yo he probado la 7, 8, 12, 18 y ahora estoy con la 21 sin contar con las 96...
Mi impresión es que la 7 era la más estable, la 8 daba problemas de bluetooth mas que nada, la 12 bastante desastre y sobre todo se comia literalmente la bateria, la 18 parecía en principio que iba prometedora pero volvía algún que otro problema de bluetooth y el consumo subía un poco... ahora llevo una semana con la 21 y por ahora no la cambio.
Uso de la Arte.
Telefono regular, agenda, excel, gps con el igo8 y bluetooth en diferentes manos libres y para pasar archivos desde pcs...
Espero os ayude en algo.
Axpion

3.21
Using 3.21 very good. with 3.18 was having GSM problem. Regarding battery. seems normal, maybe better than 3.18

Hi all
I don't understand what is radio rom. Anyone can explain me what does it brings to Artemis, and how to update roms on SPV M650 ? Should I use USPL,
? does it implies hard reset ? Could I update the radio rom without uninstalling cooked rom ?
Thank you so much !

slum said:
Hi all
I don't understand what is radio rom. Anyone can explain me what does it brings to Artemis, and how to update roms on SPV M650 ? Should I use USPL,
? does it implies hard reset ? Could I update the radio rom without uninstalling cooked rom ?
Thank you so much !
Click to expand...
Click to collapse
Yes, you have to use USPL before.
Radio ROM only upgrades the communications of you PDA. GSM, Wifi, Bluetooth... To better reception and less drain battery for example.
You don't need to Hardreset and you won't loose any data.
You can install Radio ROMs with any cooked ROM or any ROM installed.
Cheers,

Now I can see the light
Thank you

I have problem with upgrading radio rom. When run upgrading radio rom, my screen is white. My ROM is Touch Vanilla 4.02.

TheMelin said:
I have problem with upgrading radio rom. When run upgrading radio rom, my screen is white. My ROM is Touch Vanilla 4.02.
Click to expand...
Click to collapse
Try to remove your sd-card before you flash!
Cheers

I don't know really which one is better.
Maybe someone can tell me the update change list...

Zecanilis said:
Try to remove your sd-card before you flash!
Cheers
Click to expand...
Click to collapse
You are great men. Now works Thanks.

joeleez said:
I don't know really which one is better.
Maybe someone can tell me the update change list...
Click to expand...
Click to collapse
If you see the poll, most people prefer Artemis Radio 03.21.90, but we can't tell you wich one is better to your phone... You just need to flash and try them.
Read all posts and see what people say about wich one.
Cheers

Hmm with the last 3 Radio ROM's the battery holds it only for 2 days. In a previous thread which I can not find anymore someone had something about a RadioRom which kept the battery working for 4 days....
Which one was that?

That allways deppends on the use that you give to your device...
Taking me has a example... Sometimes my battery lasts 6 days... Because i only made just a couple of phone calls and send/receive a couple of SMS.
It all deppends... Just try them all and see wich one is better for your use...
Cheers

Zecanilis said:
That allways deppends on the use that you give to your device...
Taking me has a example... Sometimes my battery lasts 6 days... Because i only made just a couple of phone calls and send/receive a couple of SMS.
It all deppends... Just try them all and see wich one is better for your use...
Cheers
Click to expand...
Click to collapse
Well I do not use my phone that much but it only will last for 2 day maximum

tested 03.21.90 and then 03.18.90
03.21.90 uses slightly more battery, so using 03.18.90 now

Dutch T-Mobile or BEN 03.06.90
The best radio rom for the Dutch T-Mobile network and also BEN is the 03.06.90. I changed my rom to many radio roms with Telfort network I had never any problem with losing contact with the network. Since I switched to BEN I have nothing else then problems. I checked the radio rom from the last release of T-Mobile NL and found that they use 03.06.90. I flashed my radio rom again and untill now 12hrs I have no problems anymore. Normally I had right away problems wihtin an hour. I hope this information is helpfull for somebody with the same problem!

I'm using 02.98.90 - average battery life is 3 days. If I don't use it at all and have no backups running at night it last for 5-6 days. Reception is good and haven't found any reason to upgrade.

Error 270: Update Error.. Still unanswered

kaleyn
Junior Member Join Date: Apr 2008
--------------------------------------------------------------------------------
still nobody has solved my problem...
plz any senior member .. u must have a solution....
give me that...
Even with radio upgrades it stops automatically saying that
Error 270: Update Error
The image file is corrupted please check your update utility....
Quote:
Originally Posted by kaleyn
use USPL to get rid of the CID....count goes up to 100% screen shows black, blue green, then pops to white. I need to do a soft reset to get it running again.
Then i use ROM Update Utility to update my p3300....and it still keeps hanging on 3%....damn. i get mad...!! Have read almost all here online...no virusscanner, no firewall....I use Vista.
i even tried without memory card and phone card....and nothing seems to work.......
Rom version: 3.7.707.1 WWE
Rom date: 6/21/07
Radio Version: 02.69.90
Protocol version: 4.1.13.30
ExtROM Version: 3.6.707.101
please help

Are u using Win Vista or Xp?

I Know,
But i think phone is still CID locked?? or ROM file is to big. Artemis is flashable with VISTA

--

amerr said:
Hi Kaleyn,
I was having the same problem on xp with sp3, i was getting error 270 and it was driving me mental. remove the memory card and then use uspl to remove CID protection, let it go to 100%, you said your screen then goes white, on my Artemis, I was once shown the linux duck but for the most part the screen goes black. at this point it loses sync with the pc, the green icon goes white on the pc showing its no longer synched, ignore this and do not reset your phone. Instead close down uspl and open the rom update utility. your phone is still in sync with the pc but by doing a reset it messes it up. trust me it works, i have flashed my phone loadsa times now without any problems.
So when USPL is at 100% and your screen goes white, DO NOT TOUCH YOUR PHONE, just close USPL and open RUU and update and then like magic it should have uploaded your new rom and you'll be a happy bunny
Click to expand...
Click to collapse
Dude I did the same but I am getting same error I'm ****ed !!

I also have the same problem.
Already took the SIM card and the microSD.
I did u USPL, HARDSPL, etc etc. ..
Already tried with Vista and XP
Someone has discovered the origin of this problem?
Error 270...
--------------------------------------------------------------------
Eu também tenho o mesmo problema.
Já tirei o cartão SIM, bem como o microSD.
Já fiz u USPL, HARDSPL, etc etc..
Já experimentei com o Vista e com o XP
Alguém já descobriu a origem deste problema?

Solução para o Error 270
Finally I got it.
For those who have not yet managed to do the following:
1 USPL;
2 when finishing the USPL, let the screen stay in black / white and wait a while to restart the PDA. Is not seen, but the PDA is connected;
3 without touching the PDA or disconnect the USB cable, run your favorite ROM.
RC
--------------------------------------------
Finalmente já consegui.
Para quem ainda não conseguiu tem de fazer o seguinte:
1º USPL;
2º quando acabar o USPL, deixar que o ecra fique em preto/branco e aguardar um tempo que o PDA reinicie. Não se vê, mas o PDA está ligado;
3º sem tocar no PDA nem desligar o cabo USB, correr a vossa ROM preferida.
RC

RCabrita said:
Finally I got it.
For those who have not yet managed to do the following:
1 USPL;
2 when finishing the USPL, let the screen stay in black / white and wait a while to restart the PDA. Is not seen, but the PDA is connected;
3 without touching the PDA or disconnect the USB cable, run your favorite ROM.
RC
--------------------------------------------
Finalmente já consegui.
Para quem ainda não conseguiu tem de fazer o seguinte:
1º USPL;
2º quando acabar o USPL, deixar que o ecra fique em preto/branco e aguardar um tempo que o PDA reinicie. Não se vê, mas o PDA está ligado;
3º sem tocar no PDA nem desligar o cabo USB, correr a vossa ROM preferida.
RC
Click to expand...
Click to collapse
That is written in the USPL manual...
Before you try anything just read the manuals first... They are there to help, not just to say what a wonderfull program it is.
Cheers

Zecanilis said:
That is written in the USPL manual...
Before you try anything just read the manuals first... They are there to help, not just to say what a wonderfull program it is.
Cheers
Click to expand...
Click to collapse
Yes, you are right!
I had done almost all of USPL, but did not expect the time. Maybe not this time to restart the PDA.
Thanks and I apologize.
RC

Jeez can this be in a clearer thread, Amerr nailed my problem but it took me 4 hrs to find this solution. Thanks a

hey guyes, tried everything .... stilll not doin

rik.vanoijen said:
Jeez can this be in a clearer thread, Amerr nailed my problem but it took me 4 hrs to find this solution. Thanks a
Click to expand...
Click to collapse
will u plz quote the solution u found

kaleyn said:
will u plz quote the solution u found
Click to expand...
Click to collapse
what the hell still no sound solution..
i never expected..
this is crab ..

Today my internet connection is a bit fast, so i only took 2 sec to find your answer.
http://forum.xda-developers.com/showpost.php?p=1312109&postcount=118

Thanks for all
thanks Guy, you are the best, i follow your steps and i get it easy. thank you. sore about my english.

HP iPAQ rx5900 rescue please!

Hi, I have a HP Ipaq rx5900 Poquet pc with tom tom 6 in europe
comes from the factory with Windows Mobile 5.1, and wanted to install Windows 6.0 or 6.5, if possible.
But...
first .... as it is?
second, how to install on sd card "tom tom 6 or 7"again?
Any link for windows 6.0 or 6.5 for my ipaq rx 5900?
Please, I need to "rescue" my ipaq rx 5900, so it is not too old. thanks.
--------------------
En Español:
Hola, tengo un poquet pc HP Ipaq rx5900 con tom tom 6 de europa,
viene de fabrica con windows mobile 5.1, y quisiera instalarle windows 6.0 o 6.5, si es posible.
pero primero....como se hace?
segundo: como instalar en sd card "tom tom 6 o 7 " de nuevo?
Algun enlace para windows 6.0 or 6.5 para mi ipaq rx 5900?
Por favor, Necesito " rescatar " mi ipaq rx 5900, para que no quede demasiado antiguo .gracias.

If u have off rom wm5 + off updater it can be wm6.1/5.
If no = no update

Hello ASakovoy,
I know how you feel... At least WM 5 will be supported for a little while longer. I've been trying to upgrade a WM 2003 iPAQ (Next to be dropped from support). It is hard finding upgrades for these machines.
Since HP never issued an upgrade for the rx5900 series you will have to try your luck Googling for ROMs. Someone may have cooked one for your device. I've found that lots of persistent searching is better to get results than just asking and hoping someone who knows finds your request. Sorry, the searching really is up to you. I hope you have better luck than I have had so far.
HP does have Tom Tom 6 Western Europe for download still:
http://h20000.www2.hp.com/bizsuppor...cc=us&swItem=ip-48733-1&jumpid=reg_R1002_USEN
I assume it is in ENGlish. You may want to download the file and save it on your PC.
Another option to look at is getting Linux to boot on your device. Most likely you would boot into Linux from an SD card - rather than flashing your ROM. Then you could choose between WM and Linux as needed.
That too appears hard to accomplish. Your device has a similar processor to my rx3115. They both use the Samsung sc3244x cpu with an ARMv4T instruction set. More work has been done (both for WM and Linux) for Intel and Texas Instrument cpu's...
But if you look around enough you might find some options.
Good Luck.

Can't really help with what your asking but would like to make one suggestion for improvement. I'm able to use an 8GB SDHC card with my RX5915 using the hack in this thread.
http://forum.xda-developers.com/showthread.php?t=344338
Only problem I have with the hack is having to do a soft reset to get the card recognized again after the unit shuts off.

RumoredNow said:
Hello ASakovoy,
I know how you feel... At least WM 5 will be supported for a little while longer. I've been trying to upgrade a WM 2003 iPAQ (Next to be dropped from support). It is hard finding upgrades for these machines.
Since HP never issued an upgrade for the rx5900 series you will have to try your luck Googling for ROMs. Someone may have cooked one for your device. I've found that lots of persistent searching is better to get results than just asking and hoping someone who knows finds your request. Sorry, the searching really is up to you. I hope you have better luck than I have had so far.
HP does have Tom Tom 6 Western Europe for download still:
http://h20000.www2.hp.com/bizsuppor...cc=us&swItem=ip-48733-1&jumpid=reg_R1002_USEN
I assume it is in ENGlish. You may want to download the file and save it on your PC.
Another option to look at is getting Linux to boot on your device. Most likely you would boot into Linux from an SD card - rather than flashing your ROM. Then you could choose between WM and Linux as needed.
That too appears hard to accomplish. Your device has a similar processor to my rx3115. They both use the Samsung sc3244x cpu with an ARMv4T instruction set. More work has been done (both for WM and Linux) for Intel and Texas Instrument cpu's...
But if you look around enough you might find some options.
Good Luck.
Click to expand...
Click to collapse
Hello RumoredNow:
Thank you for your contribution. look at the link Tom Tom 6.
to me is more important now to get a WM6 or more to serve my "ipaq".
Or all windows mobile (wm6 to wm6) are the same, removing the language, and little else?
supports my "ipaq" a wm6 or wm6.5?
how do I install on my sd card?
-----------------------
En Español:
Hola RumoredNow :
Gracias por tu aportacion. mirare el enlace del Tom Tom 6.
para mi es mas importante ahora conseguir un WM6 o superior que sirva a mi " ipaq".
O todos los windows mobile (wm6 contra wm6) son iguales, quitando el idioma, y poco mas?
soporta mi "ipaq" un wm6 o wm6.5?
como lo instalo en mi sd card?

The answers are never easy, I'm finding out...
You may want to look at my thread of what I've been going through to try and upgrade an old iPAQ:
http://forum.xda-developers.com/showthread.php?t=981868
Are you asking how to install a ROM flash from an SD card?
To upgrade your OS off the card?
First you need someone who has a compatible ROM. That's what you have to search for.

RumoredNow said:
The answers are never easy, I'm finding out...
You may want to look at my thread of what I've been going through to try and upgrade an old iPAQ:
http://forum.xda-developers.com/showthread.php?t=981868
Are you asking how to install a ROM flash from an SD card?
To upgrade your OS off the card?
First you need someone who has a compatible ROM. That's what you have to search for.
Click to expand...
Click to collapse
Hi RumoredNow , I'm reading all your lengthy post, with the difficulty that my English is very bad and usually need a translator (google translator), so the translation is not perfect, and therefore the understanding is more complicated.
And it is clear that the important thing is to find a wm6 rom or above compatible (or a cooked wm5.1 ...).
The other day I saw a video on my ipaq and I see that has features that I do not see in my Poquet ... so I think it's a cooked wm5.1 version.
http://www.youtube.com/watch?v=py1d3imfb9u&feature=player_embedded
If it is true that is cooked, it means that deveria be a there to download ... where? that is the question .....
SORRY......I saw a problem in the direct link of the video.
to see him, I'll put the link before and so you just have to click on the video where it says:
http://wn.com/iPAQ_iPhone_is_possible!
Video: (click it) HP iPAQ rx5900 Travel Companion GPS ** for sale **
------------------------------------
En Español:
Hola RumoredNow , me estoy leyendo todo tu extenso post, con la dificultad que mi ingles es muy malo y necesito un traductor habitualmente(google traductor) , de esta manera la traduccion no es perfecta, y por tanto la comprension es mas complicada.
Y esta claro que lo verdaderamente importante es encontrar una rom de wm6 o superior compatible (o un wm5.1 cocinado...).
el otro dia vi un video sobre mi ipaq y veo que tiene funciones que yo no veo en mi poquet...por tanto creo que es una version cocinada de wm5.1.
http://www.youtube.com/watch?v=py1d3imfb9u&feature=player_embedded
Si es cierto que esta cocinada, quiere decir que deveria haber una por ahi para descargarla...donde? esa es la cuestion.....

LOL - I have seen that video. That is my iPAQ model series (rx3000) they show on there.
That is not an Operating System. It is just a dressed up display to LOOK like iPhone.
It is only eye-candy. If you take your dog and put a child's costume on him so he is dressed up like a cat - he will still BE a dog and ACT LIKE a dog. Same thing. You just dress the iPAQ in the costume of iPhone, but it still would BE WM 5.

ASakovoy said:
Hi RumoredNow , I'm reading all your lengthy post, with the difficulty that my English is very bad ....
Click to expand...
Click to collapse
I Own an rx 5910. I have done quite a bit of research and so far I can tell you that: there is no possibility NOW of upgrading it to wm6. . Actually it seems that most probably it will never happen: to have wm 6 on rx 5900 series. If you are interested, I could post two or three links of threads in this forum and elsewhere that make this very clear.
In the youtube post you make above, there are many videos involved and am not sure which one you are referring to. If it is the one on voice commands on rx 5910, you simply have to get voice to go. I have it installed in my iPAQ and from time to time I do use it when am driving.

Egnubo said:
I Own an rx 5910. I have done quite a bit of research and so far I can tell you that: there is no possibility NOW of upgrading it to wm6. . Actually it seems that most probably it will never happen: to have wm 6 on rx 5900 series.
Click to expand...
Click to collapse
It could happen if someone could get rx5000 Series ROM update files.
As they are available to repair and service centers. Example [here]

Spiaatie said:
It could happen if someone could get rx5000 Series ROM update files.
As they are available to repair and service centers. Example [here]
Click to expand...
Click to collapse
Hi, I saw the link, and promise the latest version of Windows Mobile to put ... but it is an ambiguous answer, because if it does not support anything more than wm5.1, they charge you 27 euros for walking the ipaq (for nothing )....

RumoredNow said:
LOL - I have seen that video. That is my iPAQ model series (rx3000) they show on there.
That is not an Operating System. It is just a dressed up display to LOOK like iPhone.
It is only eye-candy. If you take your dog and put a child's costume on him so he is dressed up like a cat - he will still BE a dog and ACT LIKE a dog. Same thing. You just dress the iPAQ in the costume of iPhone, but it still would BE WM 5.
Click to expand...
Click to collapse
Yes, maybe you're right, but if it seems it is impossible to upper windows, our iPAQ's, we would have to ask whether we settle for a custom rom of wm5 ... ..
even so, do not give up ..

ASakovoy said:
Hi, I saw the link, and promise the latest version of Windows Mobile to put ... but it is an ambiguous answer, because if it does not support anything more than wm5.1, they charge you 27 euros for walking the ipaq (for nothing )....
Click to expand...
Click to collapse
They have a WM5 ROM, but it means that iPAQ update files for rx5000 Series does exist and if I could get those files - most likely I would be able to make a WM6.1 or WM6.5.x ROM.

Hey now Spiaatie - if you're taking requests...
I've been trying to find someone who can cook a ROM for iPAQ rx3115 (straight Pocket PC - no phone). Samsung sc32440 CPU @ 300 mhz. 64MB RAM 32MB ROM...
I have the last update of WM 2003.
http://www.mediafire.com/file/i6k0935chhkgzlh/iPAQ rx3115 ROM 1_01_11.exe
There are a lot of rx3115 owners dying to upgrade. If you cooked a WM 5 of 6.1 ROm for that device I would make sure to spread your fame both far and wide.

RumoredNow said:
I've been trying to find someone who can cook a ROM for iPAQ rx3115 (straight Pocket PC - no phone). Samsung sc32440 CPU @ 300 mhz. 64MB RAM 32MB ROM...
Click to expand...
Click to collapse
Sorry to say, but it's not possible. WM5 needs at least 64MB ROM. And there is no WM5 kernel for iPAQ rx3115 - only HP can make it. Windows CE4 and CE5 have completely different memory managament.

Spiaatie said:
Sorry to say, but it's not possible. WM5 needs at least 64MB ROM. And there is no WM5 kernel for iPAQ rx3115 - only HP can make it. Windows CE4 and CE5 have completely different memory managament.
Click to expand...
Click to collapse
Hello, you can do with a ipaq rx 5935 (5900series)?
System ROM size: 2048Mb
System RAM Size: 64 Mb
Flash Rom: yes
ROM version: 1.00.02
windows mobile 5.1, latest updates:
http://h20000.www2.hp.com/bizsuppor...Id=3263043&swLang=35&taskId=135&swEnvOID=2067

ASakovoy said:
hello, you can do with a ipaq rx 5935 (5900series)?
System ROM size: 2048Mb
System RAM Size: 64 Mb
Flash Rom: if
ROM version: 1.00.02
5.1 m windows latest updates:
Click to expand...
Click to collapse
Theoritically I could make a new ROM, but I still need shipped ROM.
Now I can't do anything, because there is NO ROM file for rx5900 Series iPAQs.

Spiaatie said:
Theoritically I could make a new ROM, but I still need shipped ROM.
Now I can't do anything, because there is NO ROM file for rx5900 Series iPAQs.
Click to expand...
Click to collapse
If it is true .... it is almost impossible to find ... unless you could copy mine own ...

ASakovoy said:
If it is true .... it is almost impossible to find ... unless you could copy mine own ...
Click to expand...
Click to collapse
There is no use of your ROM, as update loader software also is needed.

ASakovoy said:
If it is true .... it is almost impossible to find ... unless you could copy mine own ...
Click to expand...
Click to collapse
anyway, thanks for the tips. and your time

need radio.img of sprint with sim unlocked.

Please, need radio.img of sprint with sim unlocked help me.:dedos cruzados:

What's the problem with your phone?

Fortunately, I have extracted the contents of RUU_ACADIA_WHL_N70_SENSE80GP_SPCS_Sprint_WWE_1.32.651.11.exe last weekend using RUU decrypt tool and below is the radio.img that came from it.
Sprint radio.img
I hope that this is the file you are looking for.

The sim unlock is not related to the radio.img

I will explain my problem, I bought a "10 evo htc" in gearbest, when it arrived in Peru and I tried it only received signal 2g, but not 3g and 4g, I tried to find imei information and discovered it was an HTC Bolt 2PYB2, Trying several roms none gave me a signal, only the rom de vietnam that is published, but only 2g signal; The European rom detects all the networks, but it does not connect to any (I test it with the network guru app) even though those bands are compatible with those of Peru.
Then, looking for information in the forums I think I must first put a sprint radio with sim unlock (I forgot to indicate that when I put the sprint rom I asked uicc code and the radio band is off)
Another question: why when I put the rom eu does not enter the signal to any network?
sorry for my english

joel_sinbad said:
The sim unlock is not related to the radio.img
Click to expand...
Click to collapse
¿como haría ? Porque con la rom eu me reconoce el imei y la radio esta activa, pero al momento de querer conectarse a las bandas no me deja,sale sim invalido. Ayer flashee la radio de la version de vietnam en la version eu y coge normal, pero solo señal 2g, lo mismo que cuando le pongo toda la rom de vietnam al celular. Me estoy volviendo loco con esto, necesito ayuda por favor

jezielstefano said:
I will explain my problem, I bought a "10 evo htc" in gearbest, when it arrived in Peru and I tried it only received signal 2g, but not 3g and 4g, I tried to find imei information and discovered it was an HTC Bolt 2PYB2, Trying several roms none gave me a signal, only the rom de vietnam that is published, but only 2g signal; The European rom detects all the networks, but it does not connect to any (I test it with the network guru app) even though those bands are compatible with those of Peru.
Then, looking for information in the forums I think I must first put a sprint radio with sim unlock (I forgot to indicate that when I put the sprint rom I asked uicc code and the radio band is off)
Another question: why when I put the rom eu does not enter the signal to any network?
sorry for my english
Click to expand...
Click to collapse
Regarding your last question, (this is just a guess) can you try manually entering Access point names (APN) of the carrier you are using in your country? Go to Setting -> Mobile data -> Access point names
By the way, I have a question, is your HTC 10 evo s-off? Because I noticed that you can flash both Sprint ROM and EU ROM. Could you please try the ROM found in https://forum.xda-developers.com/bolt/help/ruu-stock-rom-hong-kong-htc-10-evo-t3809789#post77727121?
It is a generic/unlocked ROM (US) for HTC 10 evo. Your phone need to have the following CID and MID first:
CID: BS_US001
MID: 2PYB20000
I'm not sure but this ROM is for HTC 10 evo hardware with MID 2PYB20000 w/c is also the same MID as Sprint HTC Bolt (also 2PYB20000 except that the CID is SPCS_001). If your 2G/3G/4G signal will become OK using this ROM, I will have my HTC Bolt s-off too thru Sunshine.

TheXcalibur said:
Regarding your last question, (this is just a guess) can you try manually entering Access point names (APN) of the carrier you are using in your country? Go to Setting -> Mobile data -> Access point names
By the way, I have a question, is your HTC 10 evo s-off? Because I noticed that you can flash both Sprint ROM and EU ROM. Could you please try the ROM found in https://forum.xda-developers.com/bolt/help/ruu-stock-rom-hong-kong-htc-10-evo-t3809789#post77727121?
It is a generic/unlocked ROM (US) for HTC 10 evo. Your phone need to have the following CID and MID first:
CID: BS_US001
MID: 2PYB20000
I'm not sure but this ROM is for HTC 10 evo hardware with MID 2PYB20000 w/c is also the same MID as Sprint HTC Bolt (also 2PYB20000 except that the CID is SPCS_001). If your 2G/3G/4G signal will become OK using this ROM, I will have my HTC Bolt s-off too thru Sunshine.
Click to expand...
Click to collapse
Si las he puesto y tbm aparece como banda de radio apagada, solo la de vietnam me da señal en 2g, pero verificando esa rom solo tiene 1 banda en 4g y 1 en 3g que no son compatibles con mis carriers

Ok I understand now (using google translate).
I guess you can try flashing the sprint radio.img. Please let us know if that method will enable 3G and LTE in your HTC phone. Thanks.

someone who can give me a backup of htc 10 evo. Please.

jezielstefano said:
someone who can give me a backup of htc 10 evo. Please.
Click to expand...
Click to collapse
No Do you need a Nandroid Backup from a EVO version?

b8engl said:
No you need a Nandroid Backup from a EVO version?
Click to expand...
Click to collapse
Yes, because I need to get the 3g and 4g networks, as my cell phone what is a HTC 10 evo from Vietnam only works with 2g.

jezielstefano said:
Yes, because I need to get the 3g and 4g networks, as my cell phone what is a HTC 10 evo from Vietnam only works with 2g.
Click to expand...
Click to collapse
Don't know if will help on the bands, but here it is!
That's a full 6.5 GB, you probably don't need to select all. Let TWRP auto select for you. Of course, don't forget to decompress first.
Share the results with us when you can.

b8engl said:
Don't know if will help on the bands, but here it is!
That's a full 6.5 GB, you probably don't need to select all. Let TWRP auto select for you. Of course, don't forget to decompress first.
Share the results with us when you can.
Click to expand...
Click to collapse
Thank you very much, anything notice

jezielstefano said:
Thank you very much, anything notice
Click to expand...
Click to collapse
arreglaste el problema? estoy en las mismas

Friends i have formatted HTC 10 Evo through TWRP after that hanged on logo so I've flashed RUU file from XDA developers web link then Mobile ON but with no IMEI no baseband no SIM detection and also touch buttons going problematic so please friends help that problem.
The details from HTC 10 Evo via
hTC download mode
*** locked ***
htc_acawhl PVT S-OFF
CID-HTC__059
/////(after RUU it was 11111111 then changed via fastboot command now HTC__059)/////
MID-2PYB20000
ColorID-CUS00
LK-1.0.0.0000
RADIO_01-02_U114401031_125.01.70524G_F
OpenDSP-18.7.3.00535.8994_1004
OS-1.33.425.6
Sep 21 2017,23:04:11(925253)
Waiting for your expertise friends
---------- Post added at 05:41 PM ---------- Previous post was at 05:06 PM ----------
Friends i have formatted HTC 10 Evo through TWRP after that hanged on logo so I've flashed RUU file from XDA developers web link then Mobile ON but with no IMEI no baseband no SIM detection and also touch buttons going problematic so please friends help that problem.
The details from HTC 10 Evo via
hTC download mode
*** locked ***
htc_acawhl PVT S-OFF
CID-11111111
MID-2PYB20000
ColorID-CUS00
LK-1.0.0.0000
RADIO_01.02_U114401031_125.01.70524G_F
OpenDSP-18.7.3.00535.8994_1004
OS-1.33.425.6
Sep 21 2017,23:04:11(925253)