Related
I just got a Qtek 9100 from a friend.. He said it was an old test version of the device...
I only got the device and the charger.. Now, when i plug it into my PC, it can't recognize the device.. and the firmware is from 08/2005... so I kinda feel obligated to update them..
1. Is there some place where I could retrive some drivers or something for my computer to recognize my device?
2. I checked out the thread to see wether it's Q3 or Q4.. but my IPL is 0.34 and my SPL is also 0.34 (that's it!).. so i have no idea what upgrades to use.
3. Also the keyboard (I'm not talking about the on-screen keyboard.. I mean the one that you pull out..) on the device is swedish (scandinavian) but when i try pressing the button that says like Ä it acts as an english keyboard and a "/" appears... I'm swedish so i'd love if i could get some help fixing that
Thx~ kryX
Since you own the QTEK now you can sign up at the QTEK's homepage and download the latest ROM update for your device (even in swedish) http://www.myqtek.com/
The connection problem might be another one: maybe your friend installed a USER CREATED ROM - you still should be able to enter the boatloader mode!
There are plenty of threads in here about connection problems but finally it depends on your OS and the ROM version used! If you're running VISTA then you can forget flashing your device for the time being ... !
Go to wiki.xda-developers.com and studdy the WIZARD UPGRADE and UNLOCK section. This should get you started!
Junner2003 said:
Since you own the QTEK now you can sign up at the QTEK's homepage and download the latest ROM update for your device (even in swedish) http://www.myqtek.com/
The connection problem might be another one: maybe your friend installed a USER CREATED ROM - you still should be able to enter the boatloader mode!
There are plenty of threads in here about connection problems but finally it depends on your OS and the ROM version used! If you're running VISTA then you can forget flashing your device for the time being ... !
Go to wiki.xda-developers.com and studdy the WIZARD UPGRADE and UNLOCK section. This should get you started!
Click to expand...
Click to collapse
it won't accept my IMEI #... :/ and i'm using windows XP... it connects fine, just can't "get installed".. it appears on the screen that a new device has been found.. but it can't install it..
you mean to say that you can upgrade to a ROM that's in swedish even though you have a EN device?
kryXorange said:
it connects fine, just can't "get installed".. it appears on the screen that a new device has been found.. but it can't install it..
Click to expand...
Click to collapse
you need to install Microsoft 'active sync' to get your ppc and pc communicating.
I just like to warn you to make BACKUP of your phone's firmware in case things go wrong. Don't become another 'cry baby' asking for 'urgent help' because the phone got bricked...
Do a search around to see what you need to make a backup and if your phone allows a full backup (must be CID unlocked)
good luck and welcome to forum
cheers
bbobeckyj said:
you need to install Microsoft 'active sync' to get your ppc and pc communicating.
Click to expand...
Click to collapse
that worked perfectly.. thanks...
mestrini: thanks for the tip, backed it all up, and unlocked SIM and CID locks..now the big question is, is it a Q3 or a Q4??
EDIT: also, WHERE can i get the latest firmware? all the ftp's i've seen linked are down? :/
Take a look at this: http://wiki.xda-developers.com/index.php?pagename=Wizard_Versions - to find out whether it is g3 or g4. then i suggest you start with a vanilla rom, Win 6 Pro 3.0 seems to be good now.. http://forum.xda-developers.com/showthread.php?t=309078. the download link for that is there along with the password
-Nstefanelli-
also, start out at the Wizard Wiki, it gives all of the information that you will need to know, and the rest are at the top of the forums with a "sticky" on them
good luck
Wizard Wiki - http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
-Nstefanelli-
nstefanelli said:
Take a look at this: http://wiki.xda-developers.com/index.php?pagename=Wizard_Versions - to find out whether it is g3 or g4. then i suggest you start with a vanilla rom, Win 6 Pro 3.0 seems to be good now.. http://forum.xda-developers.com/showthread.php?t=309078. the download link for that is there along with the password
-Nstefanelli-
Click to expand...
Click to collapse
I flashed it with that Win 6 pro thing.. (it was an OS ROM, right?) and now it doesn't boot anymore.. now my bootscreen shows
Wizard DVT
IPL 0.34
SPL 0.34
OS 4.0.0.0
it stays like that for quite a while then the screen goes white and it starts all over again.. should i just assume i flashed it incorrectly? because i dont know if that was a G3 flash or a G4 flash or what ever..
EDIT: wait.. third time the screen went white the bootscreen changed to the new one.. it kinda seems to have started now.. GREAT
You guys must be careful with the new WM6 ROMs since they are packed without IPL/SPL so that they can be used by people with CID locked G4 devices.
That means that people with IPL/SPL bellow 2.x must first upgrade the boot loaders to 2.xx/3.xx otherwise the new ROMs will most probably not work
you need an ipl/spl of 2.xx or higher to flash ANY WM6 rom
from the bootloader (hold down camera button while starting), flash the tmobile 2.26 factory rom to get a proper ipl/spl.
moto211 said:
you need an ipl/spl of 2.xx or higher to flash ANY WM6 rom
from the bootloader (hold down camera button while starting), flash the tmobile 2.26 factory rom to get a proper ipl/spl.
Click to expand...
Click to collapse
Would you mind just linking it to me?
EDIT: nvm :/ it seems the phone is dead now.. it was all laggy when i finally got Win pro 6 to work... and it took like 5 whitscreens for it to finally get started... couldnt send any smses or anythin.. so i was gonna try turning it off and on again... when i tried turning it off the loading symbol appeared... and went on for like 10 minutes (at LEAST) so i thought i might aswell get som sleep.. when i woke up the phone was turned off.. and i tried starting it.. it just started for like one whitescreen then it died...
can't "bootloader-boot" it.. no light goes on when i stuck it in the charger or anything.. :/
there's a link in my signature
EDIT: no there isn't i removed it and put something else in instead LOL
anyway here it is
bbobeckyj said:
there's a link in my signature
EDIT: no there isn't i removed it and put something else in instead LOL
anyway here it is
Click to expand...
Click to collapse
I think it's of no use. He bricked the phone. White screen and no boot loader and not being able to charge at all... sounds DEAD to me
kryXorange said:
...unlocked SIM and CID locks..now the big question is, is it a Q3 or a Q4??
Click to expand...
Click to collapse
just reading back, if you didn't know the answer to this question (above), you probably were not cid unlocked.
if the battery is dead (you left it on overnight?) you will need to charge it outside of the ppc, then try to get into bootloader, then flash the original operator's rom.
i wouldn't give up on anything that sells used for over £100 on ebay
bbobeckyj said:
just reading back, if you didn't know the answer to this question (above), you probably were not cid unlocked.
if the battery is dead (you left it on overnight?) you will need to charge it outside of the ppc, then try to get into bootloader, then flash the original operator's rom.
i wouldn't give up on anything that sells used for over £100 on ebay
Click to expand...
Click to collapse
i got it working again thanks for all oyur tips.. i now use that http://rapidshare.com/files/29657481/RUU_TMobile_US_226102_22610105_022511_WWE_Ship_tmob_rom.exe ... got some error msgs and stuff along the way but i finally got it all fixed now, is Win 6 pro a better OS than that T-mobile you linked? and now that i hade 2.xx IPL and SPL, can i just flash it with the win 6 pro again?
EDIT: Also, where can I get a swedish ROM? i hate having to use the on-screen keyboard everytime im typing an å ä or ö..
EDIT2: Now ActiveSync won't start anymore either... when i insert the usb cable a notification appears in the bottom right corner saying that one USB device cannot be recognized.. :S
i really need help.. seems like this thread has been forgotten? :/
-sry about double post!-
kryXorange said:
i really need help.. seems like this thread has been forgotten? :/
-sry about double post!-
Click to expand...
Click to collapse
no it hasn't, (this is a forum, not a help desk) i was just looking at it and trying to decide what, if anything to write, when my email showed another reply.
to be really honest, any question you can think of will already have been asked and answered several times in this forum - you just need to read (use Google to search this site). And that doesn't even cover the questions which you will want to ask when you begin to realize what your wizard is capable of
Swedish roms? - absolutely no idea. and so many people here are English speakers and i assume many non English/non Americans use an English language rom anyway
active sync? - try uninstalling and reinstalling, check the options, do they allow usb connections? i find AS sometimes changes options itself
bbobeckyj said:
no it hasn't, (this is a forum, not a help desk) i was just looking at it and trying to decide what, if anything to write, when my email showed another reply.
to be really honest, any question you can think of will already have been asked and answered several times in this forum - you just need to read (use Google to search this site). And that doesn't even cover the questions which you will want to ask when you begin to realize what your wizard is capable of
Swedish roms? - absolutely no idea. and so many people here are English speakers and i assume many non English/non Americans use an English language rom anyway
active sync? - try uninstalling and reinstalling, check the options, do they allow usb connections? i find AS sometimes changes options itself
Click to expand...
Click to collapse
Thanks for all the tips
Allright so i've come to realize i don't need a swedish ROM.. i just need to fix the hardware keyboard to act like a scandinavian one...
And it isn't AS that gives me trouble really.. the problem appears before activesync.. a USB icon appears and says it cannot recognize a device.. and when i click it i get a list of my USB devices and the one that has errors is written in bold... it sayd "Okänd enhet" (Unknown device).. and i can't seem to install the wizards drivers manually when i get that option.. cause i have no idea where to find them... :/
kryXorange said:
And it isn't AS that gives me trouble really.. the problem appears before activesync.. a USB icon appears and says it cannot recognize a device.. and when i click it i get a list of my USB devices and the one that has errors is written in bold... it sayd "Okänd enhet" (Unknown device).. and i can't seem to install the wizards drivers manually when i get that option.. cause i have no idea where to find them... :/
Click to expand...
Click to collapse
active sync is what should recognize your wizard. if your pc doesn't recognize your ppc, the only reason that I know of is because active sync is not installed or not working - have you uninstalled and reinstalled?
I was trying to upgrade my SX66 from the factory Windows2003 to WM6 with this HELMI_BA_WM6_R0_ installer. I started the install and it crapped out giving me an error saying that it could not communicate with my device and that I needed to plug my device back in and retry it. My SX66 is now stuck on the bootloader as I'm sure the ROM isn't complete, and the installer does nothing now. Can someone please help this noob out? I'd really like to have my phone back lol.
N1cholas said:
I was trying to upgrade my SX66 from the factory Windows2003 to WM6 with this HELMI_BA_WM6_R0_ installer. I started the install and it crapped out giving me an error saying that it could not communicate with my device and that I needed to plug my device back in and retry it. My SX66 is now stuck on the bootloader as I'm sure the ROM isn't complete, and the installer does nothing now. Can someone please help this noob out? I'd really like to have my phone back lol.
Click to expand...
Click to collapse
Did you unlock the device first?
In any case, just try to reflash your device back to WM2003 with a stock rom. It does seem to be a bad flash. Also, which OS are you using (XP or Vista)?
Follow this in order to perform the upgrade properly...
Good luck!
egzthunder1 said:
Did you unlock the device first?
In any case, just try to reflash your device back to WM2003 with a stock rom. It does seem to be a bad flash. Also, which OS are you using (XP or Vista)?
Follow this in order to perform the upgrade properly...
Good luck!
Click to expand...
Click to collapse
I'm running windows version 7. and no i didn't unlock the device. i just ran the installer application (i hadn't found a detailed install manual) i'm not entirely sure how i can re-flash now, because i can't get a usb connection made because it's stuck in the bootloader.
N1cholas said:
I'm running windows version 7. i'm not entirely sure i can re-flash now, because i can't get a usb connection made because it's stuck in the bootloader.
Click to expand...
Click to collapse
By bootloader, do you mean the three colored screen?
egzthunder1 said:
By bootloader, do you mean the three colored screen?
Click to expand...
Click to collapse
no, the screen that says serial/usb at top and 2.07 at bottom
I just wanted to make sure that we were on the same page
In my opinion (and this is just a theory), Windows 7 (since it is a beta) does not have the necessary drivers to recognize the "usb device". Hence, when you put it in the cradle, it just doesn't see it. Again, this is just a theory...
You may want to get a hold of a machine with XP (that is if you didn't make the one you are using a dual boot). You should be OK if you try to flash via XP.
If everything else fails, you can always use mtty and flash via SD card (the procedure can be found in the wiki).
I had the device synced up before the install. it's just having issues syncing while it's in the bootloader mode. The device actually appears in the usb devices, but doesn't sync. i was thinking that the device might have to be authenticated with local software(on the sx66) in order to sync. I'm using the windows vista drivers. I do have this machine dual boot, but it's not any other version of windows i'm using
Your device does not have to sync in order to up/downgrade. Think about it this way... the RUU will put the device in bootloader anyways.
Just run the installer of the stock rom (the upgrade from Cingular).
@N1cholas: Please correct me if I'm wrong. I'm just a little confused. Are you expecting MS Active Sync to show as it usually does when you are syncing your phone? If that is the case, it won't happen when on boot loader. Are you getting any error when trying to flash or you haven't tried to flash yet?
Advise:
1. Keep your hopes, don't get despert. Egzthunter is a master
2. Make sure you follow the guide... Step by Step to upgrade.
3. If it'll take you too long to complete the reading and flashing, reset your phone and put it to charge. You won't be able to flash with a dead backup battery. Main and Backup battery won't charge while on bootloader.
Edit: @Egzthunder: Sorry mate, while I was thinking, drinking coffee and writing you had already replied Like I said, your the help master. Once again, I encourage the MODS to propose you to be part of their teem. You're always there to help.
Mark
i'm going to head off to school, but it's not working. when i try to run any mods i get an error saying that it cannot communicate with device.
Yeah! Egz for MODS!!! Woohooo and Xplode too and someday..me! LOL (no i mean it!)
windows 7 uses the same drivers as vista
beakybal4 said:
windows 7 uses the same drivers as vista
Click to expand...
Click to collapse
Why do you think I don't trust it?
@N1cholas,
I apologize since I ended up going to bed yesterday night.
I think your best bet will be to find yourself a PC running XP and try the reflash in that since it seems to me that something is going on with the OS.
@red and mark
Thanks for the support, guys!!! But you guys are awesome as well!
yeah, it's weird, it's just not working anymore. It appears in the device list and everything, but in WMDC it doesn't show up, and the rom install wizzards can't communicate with it either. I have been unable to find the upgrade ROM from cingular as it seems that the siemens' page has been removed. Also, I have a 2gb SD drive, but haven't been able to find information about flashing the SX66 from the SD.
N1cholas said:
yeah, it's weird, it's just not working anymore. It appears in the device list and everything, but in WMDC it doesn't show up, and the rom install wizzards can't communicate with it either. I have been unable to find the upgrade ROM from cingular as it seems that the siemens' page has been removed. Also, I have a 2gb SD drive, but haven't been able to find information about flashing the SX66 from the SD.
Click to expand...
Click to collapse
You will not see the device in any type of sync software (call it ActiveSync, WMDC, etc). I hvae uploaded the SX66 stock installer from Cingular, so give that a shot
Here you go
SX66Update.exe
Like I said... XP computer. Also, for the SD flashing, you need to look for something called mtty and instructions on how to use it.
the proper solution
1.MTTY method for unblocking bootloader mode
2.Upgrade the same way as in Vista to stock rom
3.Sim Unock, Repartition DOC
4.Upgrade vista way to any rom you like
there are guides in WIKI about this
egzthunder1 which version extrom version and radio are in this rom - the one you sharing? As you know i make public BA shipped rom collection, and any rom which is not there is welcomed
xplode said:
the proper solution
1.MTTY method for unblocking bootloader mode
2.Upgrade the same way as in Vista to stock rom
3.Sim Unock, Repartition DOC
4.Upgrade vista way to any rom you like
there are guides in WIKI about this
egzthunder1 which version extrom version and radio are in this rom - the one you sharing? As you know i make public BA shipped rom collection, and any rom which is not there is welcomed
Click to expand...
Click to collapse
Hey xplode,
To be perfectly honest, I haven't flashed 2003 since 2006, so I would be lying if I told you. Feel free to add it to your database if you wish. FYI, this is the upgrade that Cingular Wireless used to offer when the SX66 was still available in the at&t website.
MTTY doesn't have a USB option, it's only giving me COM1, COM2, COM3...
N1cholas said:
MTTY doesn't have a USB option, it's only giving me COM1, COM2, COM3...
Click to expand...
Click to collapse
Did you try the update that I gave you?
i ran it, and it said it was trying to get the settings from the device, then it just disappeared lol. now when i run it, it extracts the install data to the temp folder on my pc, then just disappears
I have an HTC P3600 and I upgraded to WM6.1 succesfully. but I have been trying to upgrade to WM6.5 for over aweek now i have tried everything but its not working.
Each time i connect to a PC i run into problems connecting to activesync on my win XP desktop.
The same thing happens with my 2 Vista laptopsh and when i finaaly get it connected. Each time i try to install WM6.5 by running the RUU, it disconnects after it gets to the point where it says "update".
Can anyone help me solve this problem.
Thanks in advance.
Have you got Hard SPL installed? I say this because i went from cooked rom to original and it changed from olipro to official. Also i have been reading that a good way to flash is from memory card.There is a guide somewhere round here.
I have hard SPL installed. Were you able to successfully upgrade yours to WM6.5?
and is it possible to show me how you did it step by step if you can.
i had given up on getting a reply so i decided to stick with the WM6.1 i have, but if you can help me upgrade i would greatly appreciate it.
thanks a zillion
i upgraded mine by flashing the same way as i flashed any other 6.1 or 6.0 ROMs. Maybe you should try another 6.5 ROM and see if that work
Don't want to sound daft, but are you putting it into bootloader first? I did it that way rather than let the computer do it. Also i haven't flashed 6.5 as i am happy with 6.1 at the moment.
Also i have read that flashing with vista requires extra steps.
I Upgraded mine OK.
I couldn't get the flash update to work from Windows 7, but it worked fine when I reverted to running it from Vista. Ran the normal upgrade process from the PC, same as for previous 6.1 upgrades.
can you tell me which 6.5 rom you used, so i can try it probably i'm using the wrong one.
thanks
Just wildguessing, but maybe you could try altering 'enable advanced network functionality' in the 'USB to PC' setting.
BTW I use Chanvi latest 6.5 ROM and it works great. Now I'm waiting for his Utralite version, so I probably get the best ROM to be used with PointUI.
I think p3600 is to slow to wm 6.5
thanks everyone. But after countless unsuccessful tries, i finally deicded to give it up.
So i bought the Touch HD instead. Hopefully it will be easier to upgrade that to WinMo 6.5.
cheers!!!!!
hi guys,
im attempting to update my hd2 but cannont. i sync it with active sync, start the update and it changes the phone to the tri color screen, but immediately disconnects on the computer, and a 1 minute later i get the error [260] connection screen.
can anyone assist me with updating? i also heard there is a way to update from the memory card...that might be the best way for me if someone can help me with that. THANKS
trexxcrap2 said:
hi guys,
im attempting to update my hd2 but cannont. i sync it with active sync, start the update and it changes the phone to the tri color screen, but immediately disconnects on the computer, and a 1 minute later i get the error [260] connection screen.
can anyone assist me with updating? i also heard there is a way to update from the memory card...that might be the best way for me if someone can help me with that. THANKS
Click to expand...
Click to collapse
What are you trying to update it to?
secano said:
What are you trying to update it to?
Click to expand...
Click to collapse
the new update that came out a few days ago....
trexxcrap2 said:
im attempting to update my hd2 but cannont. i sync it with active sync, start the update and it changes the phone to the tri color screen, but immediately disconnects on the computer, and a 1 minute later i get the error [260] connection screen.
Click to expand...
Click to collapse
Here is a link to the error codes. Your error means you need to go back to SSPL before you can flash that ROM.
trexxcrap2 said:
i also heard there is a way to update from the memory card...that might be the best way for me if someone can help me with that. THANKS
Click to expand...
Click to collapse
Here is a link to my tutorial on how to flash via SD card.
i am having the same issue each time i attempt to update my rom. error 260.
jenelson said:
i am having the same issue each time i attempt to update my rom. error 260.
Click to expand...
Click to collapse
You are still using the original SSPL (Soft Second Program Loader) which will only accept official update ROMs.
In order to flash the custom ROMs available here, you will need to flash in a HSPL (Hard Second Program Loader).
I don't know if you are totally new to flashing ROMs or not, since you didn't say and your post indicator said that was your first post here, but I would advise you to be very, very careful. In the early days (last month, actually) a TON of people were bricking their phones because they accidentally downloaded the European ROMs for the 512Leo. Ours is the 1024Leo and only ROMs designed for our phones will work.
The phone I am using is actually a replacement from TMO. I was having issues with the original device I purchased.
How do I use a HSPL or whatever... I am slightly confused but I can catch up quickly...
Thanks.
same thing happened to me, what i did was i restarted the update without disconnecting the phone from the computer, and it worked.
nyaznteen said:
same thing happened to me, what i did was i restarted the update without disconnecting the phone from the computer, and it worked.
Click to expand...
Click to collapse
I encountered the same problem and it appeared that my computer was slow in "re-recognizing" the phone. For some reason, it had to reinstall drivers before continuing with the update. After the device was again recognized, I restartde the update (without disconnecting the phone) and it continued without issue.
I had been worried that the phone had become a paperweight when I saw the tricolor screen, but everything has been fine and the upgrade appears to have worked correctly.
jenelson said:
The phone I am using is actually a replacement from TMO. I was having issues with the original device I purchased.
How do I use a HSPL or whatever... I am slightly confused but I can catch up quickly...
Thanks.
Click to expand...
Click to collapse
Think of HSPL as your BIOS (it isn't, but it may help you to think of it as such). You don't have any control over the options, but you need it to load or install your OS. Installing HSPL is simply a matter of following the directions in the link that I posted last time: http://forum.xda-developers.com/showthread.php?t=653614
Once you have HSPL installed, you should be able to "flash" any ROM. Of course, this also allows you to flash ROMs that are not meant for your phone, so that's the danger behind it.
When you visit a thread that offers a ROM, it should either have instructions or a link to instructions on how to install. If it does not, a google search for "xda how to install a custom rom" should give you a million helpful links. (This is actually beyond the scope of this post so I won't go into details)
Hope this helped some...
Same problem but i have hspl?
not sure what im doing wrong here I've installed hspl 1.42 which was enough trouble for what seemed like a pretty straight forward job. now whatever i try to install all i get is error 260? on top of this i don't seem to be able to send message tho i can receive and the camera on my phone no longer seems to work?
i am a newbie but Ive been reading and clicking and trying to install stuff for hours and hours and so far all Ive managed to do is install hspl and reduce my phones usability.
i got windows mobile device center 6.1 tried it with and without allow usb connections.
my antivirus and firewall is off.
.net framework 4 installed.
tried different usb ports
ive tried installing Duttys_Leo_Sense_2.5_5.23569.5.5.0_2.14_Holy_Grail_576MB_V4.3_WWE and a stock rom
my computer has vista 64 on it.
im hoping im just being a bit dense here please help me i just wanna join in on all this flashing fun!!
mumbles85 said:
not sure what im doing wrong here I've installed hspl 1.42 which was enough trouble for what seemed like a pretty straight forward job. now whatever i try to install all i get is error 260? on top of this i don't seem to be able to send message tho i can receive and the camera on my phone no longer seems to work?
i am a newbie but Ive been reading and clicking and trying to install stuff for hours and hours and so far all Ive managed to do is install hspl and reduce my phones usability.
i got windows mobile device center 6.1 tried it with and without allow usb connections.
my antivirus and firewall is off.
.net framework 4 installed.
tried different usb ports
ive tried installing Duttys_Leo_Sense_2.5_5.23569.5.5.0_2.14_Holy_Grail_576MB_V4.3_WWE and a stock rom
my computer has vista 64 on it.
im hoping im just being a bit dense here please help me i just wanna join in on all this flashing fun!!
Click to expand...
Click to collapse
just for kicks did you try a different ROM, find another ROM that is Compatible and try it, not saying there is anything wrong with Dutty's , but could just be the download , but not sure since you tried stock too ...
You may need to reinstall HSPL3, if you tried to flash a stock rom, and even if it failed it could have removed HSPL ...
Also try plugging the USB cable into the back of the machine
error 260 1024hd2
Hey guys,
I am having the same issue although I may know the answer but not sure how to fix it. Prior to flashing chuckyRom, I installed HSPL but I don't think I installed the correct version (still worked). So does anyone think this entire problem is attributed to initially installing the wrong hard SPL. If so, how can this be fixed? android is running great on chuckyRom but it would be nice to use a rom that is used for more than running android.
Please help, I have been in misery trying to solve this for over two weeks now.
Error 260, T-mobile HD2
Error 260 during ROM update
I had the same problem and tried everything (?)
Finally I got it work.
After I started the update the first time, I got the message, driver was not installed successfuly ...blabla
I ignored the message, tried and the connection disconnected every time again.
At the end I used another usb port and it asked me to download the CDMA driver. After download and installation, the update was in 5 min. done
Snarksneeze said:
You are still using the original SSPL (Soft Second Program Loader) which will only accept official update ROMs.
In order to flash the custom ROMs available here, you will need to flash in a HSPL (Hard Second Program Loader).
Click to expand...
Click to collapse
He was trying to install the OEM rom. I'm doing the same and have the same issues.
Error 260 on Htc Hd2 running windows mobile 7
I cannot get data on my hd2 when I installed win7 so I wanted to downgrade the os back to 6.5 but I get Error 260 when I connect to my phone to my cpu via usb. Is there a work around?
Dizzle88 said:
I cannot get data on my hd2 when I installed win7 so I wanted to downgrade the os back to 6.5 but I get Error 260 when I connect to my phone to my cpu via usb. Is there a work around?
Click to expand...
Click to collapse
Put the phone into BootLoader Mode then connect to the PC. Run the ROM.
Error 260 connection in HTC HD2
Dear all;
i have this problem in windows 7 each time i connect my phone with pc it gave me error 260 , so when i connect the usb cable i choose the first choice sync not the default one storage and it worked for me .
Ahmed Hosni
thanks for the note
fred_up said:
Put the phone into BootLoader Mode then connect to the PC. Run the ROM.
Click to expand...
Click to collapse
First time flashing the radio and kept getting error 260 from CustomRUU.
Read so many threads and all say sync the phone with your PC and run CustomRUU. Nobody said to run it under BootLoader Mode.
This simple note helped a lot for a newbie like me.... thanks
Error [260]
Hello
I want to try to update my HD2 from 2.2 to 2.3.x but I always geht thr Connection error.
I´ve flashed my HD2 from Windows Mobile 6 to Android.
I thank you for your help.
Hi, how are you, guys ?
I'm new to this awesome forum (helped me many times), and I decided to post a new thread because I believe that my situation is pretty serious.
I'm from France, by the way, so I apologize in advance for potential grammatical errors or what. Let's cut it to the chase.
Like most of you, I love new technologies with mobiles, that's why I bought what I consider to be the greatest smartphone on the planet right now, the HTC Leo/HD2.
When I searched all over the internet for tests, reviews about several phones I planned on buying, the HD2 seemed to be the most versatile of them. I was most notably amazed by the fact that the Leo could be a home to Windows Mobile 6.5, Windows Phone 7, Android, among others. So my choice was made.
I wanted immediately to upgrade the OS, and to go into WP7. Several reasons to that, the first being Windows Mobile 6.5 Professional. As it's name indicates, this OS seemed to be made for professional purposes. Plus, and you may guess it, I was really excited to try Windows Phone 7.
I tried to search the easiest and most detailed tutorial on how to upgrade to WP7, and I found this site:
I'm not authorized to post the link to the site, so I'll just tell you that the article is "Download Windows Phone 7 [WP7] ROM For HTC HD2 [Install Guide]", in Aliwaqas[dot]com
Looks serious, right ?
I downloaded the files and followed the instructions.
Aparté: Before that, a week before, I downloaded the latest ROM from the HTC website, because I had a problem with text messages, a problem some of you (or even all of you) must've had: It took way too many time for the virtual keyboard to appear and process with the text message. So I download the ROM, it was the one from 2010-10-11, 3.14.406.2.
Back to the WP7 upgrade, now.
- It was asked to grab MAGLDR, extract and copy the files to my desktop: Done.
- Download HardSPL 2.08 and install it: Done.
After that, my phone completely froze at the white HTC Screen. Every time. I tried Soft & Hard Reset many times, still freezing. I continued, hoping that WP7 would stop the freezing.
- Download the 2.15.50.14 radio and install it. Done.
- Connect my phone to the computer and execute MAGLDR (v1.12): Done.
- Go to the fifth option, "USB Flasher": Done
And there stops my progression. As a matter of fact, it is aked to execute DWI.exe, which I did. However, every time, it finishes with this:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
Can anyone help me on this, please ? Because I can't even restart it all with the Hard Reset, because it doesn't work, obviously.
Thank you to all, peace !
Did you have the 3.14 ROM installed prior to running HSPL2, flashing the 2.15.50 RADIO?
fred_up said:
Did you have the 3.14 ROM installed prior to running HSPL2, flashing the 2.15.50 RADIO?
Click to expand...
Click to collapse
Yes I did, sir.
Hi there!
Try something like: http://forum.xda-developers.com/showthread.php?t=914026
Peace.
TheRockSays94 said:
Yes I did, sir.
Click to expand...
Click to collapse
The first thing you need to do is downgrade the WinMo6.5 ROM to either 1.66 (HTC) or 1.72 (branded: T-Mobile, Vodafone, etc). Go to HTC's website and download the ROM from there - you need to use your phone's serial number.
Put the phone into BootLoader Mode (with the phone off, press and hold the Volume Down button then tap the Power button). You will se a 3-colour screen with 'Serial' at the bottom. On the screen you should see SPL 3.03.0000 (this tells that you have the 3.14 ROM installed). Now connect to the PC and the 'Serial' will change to 'USB'.
Run the ROM (just tick the box about ActiveSync as bootloader bypasses the need for it). If you are running with Vista or Windows7 then you need to do this as an administrator. Once this is down you will have either a 1.66 or 1.72 ROM (either will have changed the SPL to 1.66.0000).
You can now run HSPL2 and select 2.08.HSPL.
You can now run the 2.08.50 RADIO.
Now you are prepaired to enter the world of WP7 or Android NAND flashing.
Hi,
Thank you for helping me.
In fact, fred_up, I'm already in SPL-2.08.HSPL. I went in the thread alarien suggested even before posting this one. When I told you that I tried everything I could, it was real. Went into several forums, several languages, but no solutions. I hope this'll be the one. Anyway.
When it is into BootLoader Mode, here is what's in there ("_" means "blank):
PB81100___HX-BC
SPL-2.08.HSPL__8G___XE
_______________0x05
CotullaHSPL______0x30
Even though I'm already at SPL 2.08.HSPL, do I still have to go through the process "3.03 -> 1.66 -> 2.08.HSPL -> 2.08.50" ?
TheRockSays94 said:
Hi,
Thank you for helping me.
In fact, fred_up, I'm already in SPL-2.08.HSPL. I went in the thread alarien suggested even before posting this one. When I told you that I tried everything I could, it was real. Went into several forums, several languages, but no solutions. I hope this'll be the one. Anyway.
When it is into BootLoader Mode, here is what's in there ("_" means "blank):
PB81100___HX-BC
SPL-2.08.HSPL__8G___XE
_______________0x05
CotullaHSPL______0x30
Even though I'm already at SPL 2.08.HSPL, do I still have to go through the process "3.03 -> 1.66 -> 2.08.HSPL -> 2.08.50" ?
Click to expand...
Click to collapse
Not really. But it's worth trying Bro
yeah, use a power mat or buy one of those external battery chargers, but be sure to make an extra battery so you can use it when charging the other one..
I'm afraid I don't see the relation between my problem and your post, coldest~~~...
have you tried running DWI.exe in administrator?
Yes, theroffness, I have, unsuccessfully.
Hi, everybody, thank you for your help
I re-downloaded the WPLEO7 folder, and I reinstalled it, it worked ! I'm now in Windows Phone 7, and it looks gorgeous.
On to the next problem, now
My phone is not recognized in my computer, no matter what way I try to go with. Installed Zune and the Windows Mobile Device Center, I can't do anything. Furthermore, the WMDC doesn't detect my WP7'ed HTC HD2. I want to install TouchXplorer and other .xap files, and I can't seem to find how I could possibly do that.
Anyone, s'il vous plaît ? (means "please" in french, for those of you who didn't know ! lol)
Again, Thank you to everybody who wanted to help me !
Follow this
http://forum.xda-developers.com/showthread.php?t=912218
I did it, thanks for the help. However, ever since I installed chevronwp7.cer, my computer can't seem to recognize my phone anymore. I have all the related software, but I can't go farther.
Also, when I put an SD Card on my phone, it can't switch on !
I honestly don't know how to deal with that, can someone do ? Thanks.
I just solved the problem by my own. But I still have this problem with SD Card. When I put it on my HD2 (at that time, the phone is off. When it is on, it isn't recognized by the phone), I can't switch it on. I obviously need space because I can't even send some damn text messages.