I have an HTC P3600 and I upgraded to WM6.1 succesfully. but I have been trying to upgrade to WM6.5 for over aweek now i have tried everything but its not working.
Each time i connect to a PC i run into problems connecting to activesync on my win XP desktop.
The same thing happens with my 2 Vista laptopsh and when i finaaly get it connected. Each time i try to install WM6.5 by running the RUU, it disconnects after it gets to the point where it says "update".
Can anyone help me solve this problem.
Thanks in advance.
Have you got Hard SPL installed? I say this because i went from cooked rom to original and it changed from olipro to official. Also i have been reading that a good way to flash is from memory card.There is a guide somewhere round here.
I have hard SPL installed. Were you able to successfully upgrade yours to WM6.5?
and is it possible to show me how you did it step by step if you can.
i had given up on getting a reply so i decided to stick with the WM6.1 i have, but if you can help me upgrade i would greatly appreciate it.
thanks a zillion
i upgraded mine by flashing the same way as i flashed any other 6.1 or 6.0 ROMs. Maybe you should try another 6.5 ROM and see if that work
Don't want to sound daft, but are you putting it into bootloader first? I did it that way rather than let the computer do it. Also i haven't flashed 6.5 as i am happy with 6.1 at the moment.
Also i have read that flashing with vista requires extra steps.
I Upgraded mine OK.
I couldn't get the flash update to work from Windows 7, but it worked fine when I reverted to running it from Vista. Ran the normal upgrade process from the PC, same as for previous 6.1 upgrades.
can you tell me which 6.5 rom you used, so i can try it probably i'm using the wrong one.
thanks
Just wildguessing, but maybe you could try altering 'enable advanced network functionality' in the 'USB to PC' setting.
BTW I use Chanvi latest 6.5 ROM and it works great. Now I'm waiting for his Utralite version, so I probably get the best ROM to be used with PointUI.
I think p3600 is to slow to wm 6.5
thanks everyone. But after countless unsuccessful tries, i finally deicded to give it up.
So i bought the Touch HD instead. Hopefully it will be easier to upgrade that to WinMo 6.5.
cheers!!!!!
Related
hi
i have an atom with ROM: kumara wm 6.1 last present
radior060822n_mn1arc_rs00052
hardware- c1 Garmin rom
I was working on the wifi and all of a sudden the atom rebooted and shutdown.I tried to revive it with hardreset and restored partially but the camera and the FM radio function is dead,if I hit the camera button the system hangs and I need to reset the atom and when I go to the FM radio it plays but no display to work with.Guys can you help me out?
should I reflas my ROM? how do I do it? Pl let me know ur help would be greatly appreciated.
thanks
mukund
kumara wm 6.1 last present 2 gig storage card.
success!!!!!!!!!! now works like a dream!!!!!!!
yes my problems were sorted out just the way ironeagle and Brian told me to reflash my ROM.I went back to WM5 the original ROM posted in WIKI,just follw my tread and strictly follow these steps and you can not fail unless you have a hardware bug in your phone.Now my phone works great and responds much better. WM6 upgrades not meant for serious office users good for experiments and be prepared to brick your device!!!! so I say stick to the original ROM and have fun ........love you wiki .......
Back to WM5 and glad I went back-Step by step tutorial
Originally Posted by japa78
Many thanks.Since this is the very first time am going to be flashing my ROM I want to check with you if this is what I need to do:
0.Ensure activesync 4.5 is installed on the desktop PC.
1.download and copy the latest official ROM MOT0822 atom ROM or any other ROM I want to flash to
desktop PC in C:\windows\temp
2.Remove memory card from Atom.
3.Go to bootloader in ATOM by pressing camera button and soft reset hole with stylus simeltaniously.
4.Connect ATOM to PC using USB cable.
5.In the desktop PC go to C:\windows\temp and run DSUU update utility.
6.Follow the onscreen instruction and at the end of it the ATOM ROM is flashed.
Is that it?
Just being overtly cautious as "bricking" my ATOM will be a nightmare and a huge financial loss for me.Pl let em know.
Thanks mate I know I can count on your advice.
What is your opinion on PDAVIET ROM which you are using now?
Mukund
India
Yep, Thats it..
I am using PDAVIET by sonblack (latest)
Hi guys,
I'm a newbie to the forum and for starters I want to apologise if I'm in the wrong section!
My question:- I want to upgrade WM6 to WM6.1 with the cube effect, what I want to know is where to find the right ROM? My ROM version is 3.4.
If I'm missing anything, can someone please let me know so I can update you guys!
Thanks in advance!
hello,
i've tested a few of the new roms thats floating around on this forum and so far for me the best has been the Ooops Black rom,,
http://forum.xda-developers.com/showthread.php?t=401062
i had to unlock my CID first using the USPL program and once i'd done that i could flash the custom rom,.
http://forum.xda-developers.com/showthread.php?t=308242
there's loads of really good roms available so just test until you find the one thats good for you.
Good Luck
i've unlocked the CID and downloaded the new ROM, but when i run the exe file that us ARTEMIS CUSTOMRUU error comes "the application failed to initialize properly (0x0000135)" now what to do?? how to run the exe file???
Are you using windowsXP??
i couldn't flash it with vista but when i used my laptop that had windows XP on and ran active sync to sync the device it worked no problem..
you have to have it sync'd with active sync.
hope this helps!
sometimes i find that if i put the device in to boot loader it works
so try update, it fails, stick device in to bootloader mode an try again.
thanks you very much
the error came on my pc becuse it did'nt had .Net framework installed..
after installin it everything went smoothly...
I have flashed my orbit with Oops Black ROM, although its very fast,but it has several bugs!! are there any better ROM's floating in this forum?? and if i want to restore my original Orbit WM6.0 OS what shud i do???
what type of bugs have you noticed?
mines running perfect!
yeah there's loads of roms available in the Windows Mobile 6 section of the Artemis forum.
you should have no problem upgrading to any rom available now.
@KevandLynds
Here are some bugs which i found
-> When using mouse mode, the pointer gets disappeared after sometime.
-> When Sliding your finger upwards (like when u wanna start that touchflo3D cube) an error comes and you have to restart the phone
-> Unable to view videos in Picture and Video tool.. although u can view pictures.
-> Cannot add menu items.
some of those are touch flo problems, 6.1 by its self it very good in my opinion, dont have any issues except that if i do a soft rest whilst plugged in to and synced with a PC it wont sync afterwards, need to rest unplugged, bizzar but doesnt happen to often
Guys I'm geting a 270 error.
I've hard reset the artemis and tried it, still doesn't make a difference!
Any ideas?
Thanks in advance guys
KevandLynds said:
hello,
i've tested a few of the new roms thats floating around on this forum and so far for me the best has been the Ooops Black rom,,
http://forum.xda-developers.com/showthread.php?t=401062
i had to unlock my CID first using the USPL program and once i'd done that i could flash the custom rom,.
http://forum.xda-developers.com/showthread.php?t=308242
there's loads of really good roms available so just test until you find the one thats good for you.
Good Luck
Click to expand...
Click to collapse
must be the biggest piece of crap sofware yet stops your phone working and cant put any programs on phone avoid this one
Hi,
Help me please just me and that happens to me the mistakes my God.... I had the original ROM version coming with my diamond2, put the upgrading and went well until the moment he arrived at 9% and restart the pda, re-install I think is normal, however the installation continued until k stopped in 18% and after a long time gave a notice of error (262) made the recovery as recommended and continues to give error ....
I do help me please
This just happened to me too
My phone was hardspl´d
It stuck at 18%, but no error message so far. Did you unplug your phone?
Read this:
http://forum.xda-developers.com/showthread.php?t=425913
I'm not sure. Have you flashed other roms before? Perhaps you have a bad download. I know the servers are overloaded from all of us geeks sucking down the WM6.5 rom... perhaps its bad.
What I normally do is put the phone in bootloader mode first by holding VolDown, while resetting the phone. This will give windows time to install the proper drivers and get situated. Once done, try flashing again.
I think 262 is a connection error. Probably driver related since you said you ran your stock rom. But check your cable. Make sure its secure and reliable. Next try another USB slot. If nothing else try a different computer... sometimes PCs just will not cooperate.
Thank you very much fighter, will try that.
I had Official 6.1 Asia WWE installed, HARDSPLed. Tried to upgrade to 6.5 on my computer and my laptop, nothing worked. Both stops at 9%, disconnects, comes back and stucks at 18% again. Had to go back to 6.1, this time it worked to bring phone to life.
My phone was bought in Taiwan.
Guess I am out of luck
I think the best way to upgrade is as follows:
1. Run the RUU_Topaz_S_HTC_WWE_2.16.405.4_Radio_Sign_Topaz_61.44tc.25.32_4.49.25.17_Ship.exe on your PC/laptop to extract and get the RUU-signed.nbh.
2. Copy the RUU-signed.nbh to topaz SD card and rename to topaimg.nbh
3. Upgrade new ROM from SD card.
I had the same 262 error as well, screen went blank for a second at 9% and finally freezez at 18% with the error message. Heres what you need to do:
Update your HardSPL to 1.83
Flash 6.5 again
????
Profit!
Hello,
already did everything you say and nothing. I liked to tell me where I can get the former Rom wm6.1 because meeting.
help me please
duongla said:
I think the best way to upgrade is as follows:
1. Run the RUU_Topaz_S_HTC_WWE_2.16.405.4_Radio_Sign_Topaz_61.44tc.25.32_4.49.25.17_Ship.exe on your PC/laptop to extract and get the RUU-signed.nbh.
2. Copy the RUU-signed.nbh to topaz SD card and rename to topaimg.nbh
3. Upgrade new ROM from SD card.
Click to expand...
Click to collapse
Would you be so kind as to enlighten me/us on how to extract the nbh file from the executable file.
Thanks
player911 said:
I'm not sure. Have you flashed other roms before? Perhaps you have a bad download. I know the servers are overloaded from all of us geeks sucking down the WM6.5 rom... perhaps its bad.
What I normally do is put the phone in bootloader mode first by holding VolDown, while resetting the phone. This will give windows time to install the proper drivers and get situated. Once done, try flashing again.
I think 262 is a connection error. Probably driver related since you said you ran your stock rom. But check your cable. Make sure its secure and reliable. Next try another USB slot. If nothing else try a different computer... sometimes PCs just will not cooperate.
Click to expand...
Click to collapse
How can u exit bootloader screen? Only by removing the battery or...?
Thanks!
I do not have with me the adapter card to do this
There is also a problem is that the pda now I do not go the menu with the three colors blue, green and red, until I have done a hardreset and nothing ....
at least I no longer ask the solution with the ROM 6.5 we only have as I had before ... and wanted my pda to work help me please
Little history for my friends with same problem here:
1. Bought Diamond in Taiwan with Chinese;
2. HARDSPL 1.33;
3. Install Asia WWE 6.1 ROM;
4. Try update Official WWE 6.5 ROM, no luck, remove battery and put back;
5. Reinstall Asia WWE 6.1 ROM, everything back to normal;
6. Update HARDSPL 1.83; Ask brother to donate
7. Install Duttys ROM or Official ROM works too
Hello,
I already installed the previous ROM with the 6.1 and everything was normal.
I tried to install again the OFFICIAL ROM 6.5 and the problem remains back to the error at 9% and 18% for the progress bar giving an error (262).
not understand some things as:
6. Update HARDSPL 1.83; Ask brother to donate
7. Install Duttys ROM or Official ROM works too
is there any solution?
can help me
Sorry:
1. install Hard-SPL 1.83.OliNex (http://forum.xda-developers.com/showthread.php?t=520312)
2. install 6.5 ROM or Cooked Rom.
It resets 9% again in Official ROM, but reconnects and go to 100% (no stop 18% again).
Dutty ROM no stop at 9% or 18%.
problem solved
thanks for the great help amazing
thank you very much
hello
the memory card is not me out with the official wm 6.5 ROM
what can I do to boot the card?? I have a diamond2
ah no problem of card pk started the card with the adapter to the PC and read it perfectly.
pesquisar
AntonyWatson said:
Would you be so kind as to enlighten me/us on how to extract the nbh file from the executable file.
Thanks
Click to expand...
Click to collapse
When you run the RUU, the RUU-signed.nbh will be extract temporarily to a folder in driver C:
(For me: C:\Users\Duongla\AppData\Local\Temp\pft51D9.tmp)
Just do a search and you'll find it.
And remember to HSPL to 1.83.
i have the same problem too
hello
i have a diamond 2
ihave olinex 1.83 from here http://forum.xda-developers.com/showthread.php?t=520312 and i can not install ANY wm6.5 rom!!! on the other hand EVERY 6.1 rom i have trie (5 different greek and english) work perfect?!?!??
any suggestions?
thanks
i had the same issue
i was running 6.1 (stock rom) which was hard spl'd
i had the same error kept going to 262 and haviong to be recovered
so i re hard spl'd with the latest one, and it worked fine after that,
Hi all,
I'm a newbie here so sorry of this type of problem has previously been solved in a later thread. If so I couldnt find it.
Several months ago I returned from China to Germany with my Dopod C858 with stock windows in English, I found a link on how to upgrade the PDA to a cooked rom ( I cant quite remember which one but I worked fine and looked quite smart compared to the standard windows layout) nedless to say several days later I was not quick enough with the charger and let it run flat. After charging nothing worked anymore!! I can get boot loader (ISPL 1.09.0001 SPL 1.09.0001) and thats it. I have tried every possible way appart from gold card to reinstall a rom but always have either error 240,264,300 take your pick its different every time. I am running vista 32 (Prophet tools vista driver ). Please help with some suggestions or guidance how I can restore it..
Ps Active sync or even widows mobile device centre doesnt recognise it though if I go into Properties/Device Manager it comes up as a HTC Mobile device
Many thanks
You need to flash your original carrier ROM. Go into bootloader, hook up your phone via USB and flash it. Then you should have an updated IPL/SPL of 4.xx.xxxx, after which you can then apply HardSPL and flash another custom ROM if you like.
1. This is NOT a ROM Development thread. I moved it. Please post in the correct sectio next time.
2. It has been covered many times.
3. You flashed using USPL or HardSPL but your SPL is below 4.0 They're both incompatible with your SPL.
4. Your only fix will be a gold card. Search for it and you will find detailed instructions on how to fix it.
Moved?
Where did you move my thread to please?
It was moved here.
ivanmmj said:
It was moved here.
Click to expand...
Click to collapse
LOL, wow.
Hi
I just bought a used Diamond 2 and wanted to update it to 6.5.
But when i try it stops for at 9% and then looses connection with the PC but recovers and continues to 18% then it stops and the RUU wants to recover the installation, that resulted in the same error.
Luckely I tried the offical 6.1 installation, and that installd OK so my phone is OK.
But why can´t I install 6.5?
I checked with the guy i bought it from, and he said it has been flashed before with a dutty or tom´s rom.
Can this be why it wont load?
I check the bootloader screen (thanks to Drag-On guide) and i says SPL-1.33. OliNex MicroP-Topaz (LED) v10
Do I need 1.83 to install offical 6.5?
I am using swedish rom since I am swedish.
Can anyone help me?
/ Bidde
Try hard spl 1.83, then try re-flashing your 6.5
If it still won't flash, try a different rom. Download a cooked rom, Tess 4.0 for instance, and see if you can flash it. If you can, there is probably an error with the original rom. Tess is close to stock anyway, but faster and better
He he!
It worked! Thanks alot!
So now when I have done that, I will try to install a rom.
/ Bidde
yeah try hard spl 1.83 1st and then u'll be able to flash wm 6.5.
that's the only wayt to do it, otherwise it'll remain stuck at 18% everytime u try to flash the new rom
i have same problem now.
Please, where did you find offical 6.1 installation?
Could you pm link please.
I found on the http://wiki.xda-developers.com/index.php?pagename=Topaz_ROMs_Shipped my previosly ROM and recovered phone
Uh
The 6.1 I just downloaded it from the www.htc.com site.
Under the support you will find youre phone
exactly likeme ,, try to remove memory card