Hello,
Hopefully somebody can help me on this one because it is absolutely driving me nuts and I can't find a shred of information on it anywhere.
I have an L2TP VPN setup for work and it works great if my phone is connected over Wi-FI. However, I can't get it to work over the cell network. When I hold down the VPN entry and click "Connect" it waits about 3 seconds and brings up an error saying "Cannot connect with current connection settings. To change your connection settings, tap Settings". If I tap "Settings" it just brings me back to my VPN entry. Again, this works flawlessly over WiFi so I don't believe it's an issue within the settings of my VPN connection.
Is there a registry hack I need like the "ForceCellConnection" key used with tethering? Am I supposed to create a Modem entry in the VPN settings? I've tried this and copied the properties from the default "Sprint" connection but that doesn't work.
Thoughts? Ideas?
Thanks,
Scott
sounds like your phone company are blocking the ports required for vpn try connecting them
Rudegar said:
sounds like your phone company are blocking the ports required for vpn try connecting them
Click to expand...
Click to collapse
Have you heard of Sprint blocking VPN? Also, this worked fine on my old Touch Pro Diamond but hasn't worked since I got my Touch Pro 2.
Thanks,
Scott
A similar issue
HI
I have a similar issue
Using windows mobile 6.5 device with a Vodafone 3G sim
Connecting to a draytek vigor 2820 router setup with basic PPTP
the wm6.5 device will connect to the 3G network but the VPN does not connect.
if I turn the 'phone off and turn on wifi, the same VPN settings allow me access.
Conclusion: VPN settings are OK
Using windows xp PC with the same Vodafone 3G sim in a USB dongle
Connecting to a draytek vigor 2820 router setup with basic PPTP
the Windows PC (wifi off, network cable out) will connect to 3G and also connect using PPTP to the VPN
Conclusion: Provider (vodafone) is not blocking the ports.
which leads me to think that the problem resides in the VPN client on WM6.5.
however I'm not sure where to go from there. Have I missed some setting? does it even work? any assistance greatly appreciated.
best regards
Stuart
i think this is the script blocking by the phone company
Try connecting via hostname/IP address in the VPN setting.
SMackenzie said:
HI
I have a similar issue
Using windows mobile 6.5 device with a Vodafone 3G sim
Connecting to a draytek vigor 2820 router setup with basic PPTP
the wm6.5 device will connect to the 3G network but the VPN does not connect.
if I turn the 'phone off and turn on wifi, the same VPN settings allow me access.
Conclusion: VPN settings are OK
Using windows xp PC with the same Vodafone 3G sim in a USB dongle
Connecting to a draytek vigor 2820 router setup with basic PPTP
the Windows PC (wifi off, network cable out) will connect to 3G and also connect using PPTP to the VPN
Conclusion: Provider (vodafone) is not blocking the ports.
which leads me to think that the problem resides in the VPN client on WM6.5.
however I'm not sure where to go from there. Have I missed some setting? does it even work? any assistance greatly appreciated.
best regards
Stuart
Click to expand...
Click to collapse
Related
I am trying to establish a VPN connection but cannot get the connection to work.
I am using the built in MS VPN client of Win Mobile v5.0 (5.1.1700 build 14352.0.1.0)
I am having real problems getting a VPN connection set up with our network.
I have tried both PPTP and L2PT
When L2TP, I was authenticating with a preshared key
Firewall logs show PPTP negotiation successful, and issues a VPN IP address to the device
It can ping the firewall external interface, but times-out trying to reach an internal address
The VPN session is established, but the firewall logs don't register either deny or allow traffic for each internal ping request, rather the firewall packet error count increments for each failed attempt.
Any help is greatly appreciated.
I had problems with PPTP - gave up
I hate the way Windows mobile labels connections.
I connect to many customers with PC Anywhere, VNC, SSH etc and I have access via serveral different windows PPTP VPN.
Like you I setup the details in connections and try to dial.
Nothing seems to happen. The connect option does not change to disconnect. So I assume it is not connected.
I have a feeling these connection do not work over WIFI. and perhaps work over T-mobile 3g only, to maximise data revenues.
Seems very buggy to me. I would really like someone to post a working example/Instructions. Can I get a refund on my MDA PRo?
MS please note it is not a connection to my work or an internet connection it is to a customer for remote support, likewise I often connect remotely to my home via PPTP from my office.
confirmed VPN works over t-mobile 3g not Wifi
SEems the VPN links only work over 3g not Wi FI.
I'm using a PPTP connection over either 3G of WIFI depending on te active connection.
- When WIFI is active the PPTP connection connects using WIFI (I can switch off the phone, so it must be using that one)
- When no WIFI connection is active it automatically connects to 3G first, and than starts the PPTP session
In network management I'v set:
Internet:
Internet (the one containing the 3G connection)
select 'this network connects to the Internet' on the proxy tab.
private network:
My Work (the one that contains the vpn connection)
do NOT select 'this network connects to the Internet' on the proxy tab.
So as you can see, nothing special (I'm using a Qtek 9000 with standard Wm5 ROM)
Can anyone connect to VPN (PPTP) using WM5 via wireless or GPRS?? When i use my old XDAIIi or II, i can connect by now using WM5 i cannot.
Hope those can connect please share. tks.
I can connect to a Windows 2000 PPTP VPN via wireless -- make sure that in Settings/Network Cards/Network Adapters, your network card is set to connect to the Work network.
Also, in Settings/Connections/Advanced/Select Networks, make sure that the lower droplist (private network) is configured to use the Work network.
Aside from those two items, I can't think of any other gotchas.
Ya still doesn't work......
do you know what the vpn device is that you are trying to connect to?
windows servers tend to be quite reliable. there are known issues with some checkpoint and cisco devices.
Hello,
I am having the same problem! I cant connect via VPN (PPTP) to my Windows Server 2003 RAS setup. It works perfectly fine on my laptop over the internet but when I try to connect using my Cinguar 8125 I get a generic "Invalid username/password' kind of error message. I have tried several differnt things, but I was wondering if there are security settings that are turned off or something like that? I actually have my RAS policy to let any device establish a VPN connection (obviously as long as it is authenticated) so I dont know what to do next... any suggestions??
RickoT said:
Hello,
I am having the same problem! I cant connect via VPN (PPTP) to my Windows Server 2003 RAS setup. It works perfectly fine on my laptop over the internet but when I try to connect using my Cinguar 8125 I get a generic "Invalid username/password' kind of error message. I have tried several differnt things, but I was wondering if there are security settings that are turned off or something like that? I actually have my RAS policy to let any device establish a VPN connection (obviously as long as it is authenticated) so I dont know what to do next... any suggestions??
Click to expand...
Click to collapse
For me works fine. I have only 2 connections:
a) my isp, with gprs configuration for vodafone
b) my work network, with the vpn connection definition (ip address, user, passw and domain)
I have it set up the same way and I still get the password issue... what kind of policies do you have in RAS?
RickoT said:
I have it set up the same way and I still get the password issue... what kind of policies do you have in RAS?
Click to expand...
Click to collapse
did you uncheck the security in the connection with the server?
take care with the name user, times exchange get crazy: server/user or only user name for the user field...
Public IP
afterlife said:
Can anyone connect to VPN (PPTP) using WM5 via wireless or GPRS?? When i use my old XDAIIi or II, i can connect by now using WM5 i cannot.
Hope those can connect please share. tks.
Click to expand...
Click to collapse
Hi! I am not an Network expert at all, but here in Norway with one teleoperator we have to use a special access point name on My Work Network connection to get a public IP-address so Network accepts the connection. Perhaps nothing to do with your problem, but also we experience a lot of PDA users having no problem with pre-WM5 devices and much problems with WM5 devices and VPN
Hi
does anyone know either how to get VPN to connect thats built in vpn or a 3rd party VPN client that will connect to PPTP VPN's
I did setup VPN in my connection list, checked all the settings and they are ok but when i tap and hold on the vpn connection and tap on connect it does nothing, i tried bluefire vpn but that wouldnt connect, looking in to it more it seems to only connect to IPSec VPN's
I am using Vario 2 on T-mobile
can anyone Help?
Thanks
Hi
Couple of things to check.
Make sure you have two connections listed in your connections. The first being your internet gprs connection ie tmobile. The second being say My work network.
If not go to advanced tab/select Networks and select or create a new one for "Programs that automatically connect to a private network....." now edit this connection go to modem tab and make sure it DOES NOT have a modem listed as it will connect via your existing gprs or wireless internet connection. In the vpn tab add your pptp vpn settings. And in the Proxy settings make sure the "This network connects to Internet" box is NOT ticked.
Once you have the connections setup make a connection to the internet either your gprs or wireless, then go to connections vpn and tap hold connect and see if this works. You also may have to add intranet urls/address's to exceptions list so as to access them thru the vpn
Regards
Stephen
Hi
I can get connected to a vpn now but as soon as any traffic starts going over it it seem drop out and dissconnects, any idea what that could be?
thanks
PayableOnDeath said:
Hi
I can get connected to a vpn now but as soon as any traffic starts going over it it seem drop out and dissconnects, any idea what that could be?
thanks
Click to expand...
Click to collapse
Hi
any idea on this one ?
Thanks
Hi Everyone,
Having the Shift as my workhorse since some moths, there is still one annoyance I couldn't avoid: my VPN connections are interrupting the Internet connection when using 3G/HSDPA modem connecting to Internet in Vista/WM.
I was trying to search through all existing threads, but I still don't see anyone finding a solution.
I think the root lays in WM somewhere, since I cannot establish a PPTP connection in WM neither. In my case it is certainly not caused by the data provider, because I have checked it with them.
Let's try to put our knowledge together to sort this out !
This is normal behaviour I suppose
When connected to the VPN, the VPN must provide you with either a proxy or another internet gateway, otherwise you are just connected to a private network...
Maybe you mean something else, but from what I read it seems like you never got on the internet with VPN active.
If you did, and you are talking about intermittent network errors, then only high performance settings on your power settings may help.
If you could give more info I could help more. IP/Proxy/Gateway/ did it ever work yes no etc.
lucid said:
When connected to the VPN, the VPN must provide you with either a proxy or another internet gateway, otherwise you are just connected to a private network...
Maybe you mean something else, but from what I read it seems like you never got on the internet with VPN active.
If you did, and you are talking about intermittent network errors, then only high performance settings on your power settings may help.
If you could give more info I could help more. IP/Proxy/Gateway/ did it ever work yes no etc.
Click to expand...
Click to collapse
Lucid,
Thanks for replying. I will try to explain it another way.
1. When I am connected to Internet via Wifi, I have no problem using my VPN connection. I get authenticated and connected to the company network and the connection stays active as long as I want.
2. Using 3G/HSDPA Internet, the following happens:
- I start the same VPN connection, and get connected.
- Than my 3G/HSDPA connection breaks up, and the PPTP dialin stays alive - it doesn't have any use this way of course.
- When I disconnect from VPN, the 3G connection comes back automatically.
I hope this is more clear this way, any hints are very welcome !
jarbi said:
2. Using 3G/HSDPA Internet, the following happens:
- I start the same VPN connection, and get connected.
- Than my 3G/HSDPA connection breaks up, and the PPTP dialin stays alive - it doesn't have any use this way of course.
- When I disconnect from VPN, the 3G connection comes back automatically.
Click to expand...
Click to collapse
Thats exactly the same problem that i have had for over months - it just doesn't work and I can't see any way to get it to work - so much so, I don't use the Shift anymore - got a Tytn II and redfly and just remote desktop to a PC on the work lan!
jarbi said:
Lucid,
Thanks for replying. I will try to explain it another way.
1. When I am connected to Internet via Wifi, I have no problem using my VPN connection. I get authenticated and connected to the company network and the connection stays active as long as I want.
2. Using 3G/HSDPA Internet, the following happens:
- I start the same VPN connection, and get connected.
- Than my 3G/HSDPA connection breaks up, and the PPTP dialin stays alive - it doesn't have any use this way of course.
- When I disconnect from VPN, the 3G connection comes back automatically.
I hope this is more clear this way, any hints are very welcome !
Click to expand...
Click to collapse
The VPN that you are running is on VISTA side.(if yes try to see the routing table) by default the VPN get the default GW, and try to change it.
If this is the issue then you can go to the VPN connection properties -> Networking ->TCP/IP -> Properties -> Advanced -> IP Setings -> unchek the use the default GW on remote network.
regards
Is this a problem caused by this vista "feature", which disconnects the 3G Modem from Vista, as soon as an other network is being connected via WLan or via cable?
I think this is a stupid feature. Instead of that the users just should set the metrics for the networks manually and you can be sure, that Vista always uses the WLAN instead of the GSM/3G modem, if both where available.
alazarid said:
The VPN that you are running is on VISTA side.(if yes try to see the routing table) by default the VPN get the default GW, and try to change it.
If this is the issue then you can go to the VPN connection properties -> Networking ->TCP/IP -> Properties -> Advanced -> IP Setings -> unchek the use the default GW on remote network.
regards
Click to expand...
Click to collapse
alazarid,
Thanks a ton, the TCP/IP part did the trick ! Now my VPN has a use ).
cheers !
Ok guys heres the issue...
At first I thought this problem was associated with the fact that there may have been some software monitoring for other data connections, to disable the GSM modem when not needed...
After checking into everything, I found that there is probably NO software that does this...
Since WM handles the passthrough for the 3G connection, and ontop of that the actual endpoint for the data connection on the GSM connection is the WM side and not Vista, what happens is what when the VPN creates a connection and you opt-in to use the default remote gateway (I prefer to use it, because I require this for the work I do), the default gateway is updated on the 3G network interface.
I beleive that this update of configuration, then causes the WM side to stop the connection because either a) it doesn't know howto interprit this or b) retries to create the connection because it thinks there is an error.
I havn't played with this for a few weeks, and have my fair shareof other stuff I deal with, so I cannot remember if WM NATs the 3G connection, but the key thing breaking this is the WM side.
I beleive that IF you did want to hack up a configuration that uses the remote gateway, you could configure a VPN connection under Windows Mobile and have WM connect to the VPN, therefor the PC would be using that connection (but wouldn't be aware that its connected to the VPN), therefore giving the user access to the VPN, WITH the remote default gateway being used.
Again, as I mentioned its been a while since ive gone tech on my Shift, but I beleive this is correct. If anyone wants to add anything, please feel free.
Hi!
I have been trying to connect to my to vpn pptp server (witopia.net) for 2 days. I tried every combination that i could think, but there must be something i am doing wrong. I think the mobile is trying to connect to the vpn server through gsm because everytime i try to connect the gsm signal bars disappear for a few moments. How can i make sure that the vpn connection goes through wifi?
I have managed to actually connect to the vpn server, but i cannot access websites like facebook and youtube from the Leo (I live in China and they are blocked). I am able to access blocked services through my iphone and laptop through the same vpn connection.
Any suggestions?
Thanks
PPTP on WM6 is a major problem. Especially if the server (and most do) required MPPE. Its one of the few niggles I have about WM. If you own the server your best setting up the conection using L2TP/IPSEC.
Or if you dont own the VPN server, and have a server laying around the house (as I do) you could set up your server to use the PPTP VPN then set there server as a Proxy, and connect WM6 to the server via proxy...so basically WM6>Proxy>VPN>interwebs
Hi Jagnet, Thank you for your reply.
Unfortunately i am not able to use Ipsec/L2TP in China, only PPTP works fine with blocked sites.
After trying many combinations, there is a step that i havent been able to figure it out.
Once i am in Start > Settings > Connections (tab) > Connections (icon) > Advanced (tab) > Select Networks, How do i select the WIFI connection in "Programs that automatically connect to the internet should connect using" opcion? . On the modem tab i only can choose "celullar line", "Celullar line (GPRS)" or "Hayes Compatible on COM1:", there is nothing about WIFI there, so when i try to connect at the vpn server specified in "Programs that automatically connect to a private network should connect using", the phone seems to be trying to connect via GPRS.
¿Any ideas?
Thanks
joaquinmora said:
Hi!
I have been trying to connect to my to vpn pptp server (witopia.net) for 2 days. I tried every combination that i could think, but there must be something i am doing wrong. I think the mobile is trying to connect to the vpn server through gsm because everytime i try to connect the gsm signal bars disappear for a few moments. How can i make sure that the vpn connection goes through wifi?
I have managed to actually connect to the vpn server, but i cannot access websites like facebook and youtube from the Leo (I live in China and they are blocked). I am able to access blocked services through my iphone and laptop through the same vpn connection.
Any suggestions?
Thanks
Click to expand...
Click to collapse
having similar issues with HD2. CMCC as well, in China.
I am getting a proxy IP address if I check on ipchicken.com, etc
but I am not able to open FB.
I am not using the PPTP option, but using their SSL service with
openVPN. but STILL not working..
right now on support chats with witopia.
VPN PPTP is simply broken in WM. It will work, but only with no encryption at all, which beats the purpose.
First of all sorry for bumping this old thread. But I have been looking and it seems kinda close to what I`m doing, oh a little new to vpn.
I have managed to sucessfully connect the HD2 via VPN in connections only when on the lan (outwith I need to contact O2 to get it enabled apparently). I setup a dialup connection in Win 7; HD2 says I`m connected to the VPN.
However heres the thing. Am I right in thinking that folders by default have to be shared. Therefore when using resco I can see network folders anyway, when connected to wifi.
So how would I prove that I can see folders shared to the VPN and not on the LAN as I cant seem to prove whether I`m seeing the folder via LAN and not on the VPN?
Sorry if its confusing but perhaps you get my drift? Or am I missing the point entirely....