For those who wants to use Russian and English standard keyboard (both hardware and software) with non-Russian ROMs, I have extracted files from Russian ROM and put them in one cab file.
Just install the cab and you will get your standard SIP with Rus/Eng languages and Rus/Eng hw keyboard.
cBorisa said:
For those who wants to use Russian and English standard keyboard (both hardware and software) with non-Russian ROMs, I have extracted files from Russian ROM and put them in one cab file.
Just install the cab and you will get your standard SIP with Rus/Eng languages and Rus/Eng hw keyboard.
Click to expand...
Click to collapse
Thanks! Can you extract from official 6.5 rom?
It is from original WM6.5 Russian ROM
Кстати, почему то когда в xt9 набираешь текст, когда он подстанавливает примерное слово то отображается то, что ты набираешь. То есть, в поле где вводится текст примерно не правильный набранный, а в полоске с выбором слов выберается другое. Можно исправить?
I hope nobody has any objections against me writing in Russian.
Спасибо за релиз, но я для страховки переспрошу:
у меня немецкий телефон, со спецбуквами типа ÜÄÖ, потеряю ли я их, если установлю этот релиз?
Есть риск хардрезета?
Edit: It works! Just gave it a try. One question: is there any possibility to keep the virtual russian keyboard AND my german hw keyboard layout?
wow!!! finally I get to make an addon for my keyboard!!! this makes me giddy. thanks!! by the way, will this work with the font, or does it change the font??
Oowashi said:
I hope nobody has any objections against me writing in Russian.
Спасибо за релиз, но я для страховки переспрошу:
у меня немецкий телефон, со спецбуквами типа ÜÄÖ, потеряю ли я их, если установлю этот релиз?
Есть риск хардрезета?
Edit: It works! Just gave it a try. One question: is there any possibility to keep the virtual russian keyboard AND my german hw keyboard layout?
Click to expand...
Click to collapse
I'm working on it already. trying to make a language pack that is not device dependant. already on the second version.
Problem solved:
attached is the language pack that will not affect the hardware keyboard no matter what the layout is. in fact you can have two languages simultaneously.
This should not affect any hardware settings for any device; but you only have the option of two languages unless you edit the reg setting:
[HKLM]Tegic/eT9/
Available languages: 0119,0109,XXXX (etc)
the more languages you add, the more you have to choose from.
(tested on the TMOUS Rhodium and did not screw up my hardware layout no matter the language setting; should also work for wwe roms as well.)
I have to say, it is slower than the optimised skin I made for the original keyboard... I might just have to spend another 3 days messing with this one
Oowashi said:
I hope nobody has any objections against me writing in Russian.
Спасибо за релиз, но я для страховки переспрошу:
у меня немецкий телефон, со спецбуквами типа ÜÄÖ, потеряю ли я их, если установлю этот релиз?
Есть риск хардрезета?
Edit: It works! Just gave it a try. One question: is there any possibility to keep the virtual russian keyboard AND my german hw keyboard layout?
Click to expand...
Click to collapse
Well, basically it switches Keyboard layout to English/Russia. Try this cab - i modified registry values and replaced all references to English with German. However, I'm not sure it's goanna work, so please make sure you have a backup of your data before you do it
@S.V.I
Awesome news, looking forward to your release.
@cBorisa
Thank you very much, i will give it a try.
S.V.I said:
I'm working on it already. trying to make a language pack that is not device dependant. already on the second version.
Click to expand...
Click to collapse
Actually this version is Device "independent" - it will change the hardware keyboard layout to Russian/Eng (if you the device uses standard hardware driver), and eZinput will be switched to Eng/Rus. I checked it with Rhodium and Xperia - works great. If you don't have eZinput installed, it won't do anything
cBorisa said:
Actually this version is Device "independent" - it will change the hardware keyboard layout to Russian/Eng (if you the device uses standard hardware driver), and eZinput will be switched to Eng/Rus. I checked it with Rhodium and Xperia - works great. If you don't have eZinput installed, it won't do anything
Click to expand...
Click to collapse
I have a TMOUS rom. the original package messed up my hardware Fn Keys. Also, since the hardware keyboard does not show the keys in russian, I do not see the point of using it to type in russian.
Also, I just needed the pack as I have all of the other files already built into the rom.
I am very greatfull for your cab... you have no idea how much. Been looking for it for 2 months and now I finally have the option to type in russian. THANK YOU!!!
S.V.I said:
I have a TMOUS rom. the original package messed up my hardware Fn Keys. Also, since the hardware keyboard does not show the keys in russian, I do not see the point of using it to type in russian.
Also, I just needed the pack as I have all of the other files already built into the rom.
I am very greatfull for your cab... you have no idea how much. Been looking for it for 2 months and now I finally have the option to type in russian. THANK YOU!!!
Click to expand...
Click to collapse
You are very welcome.
I'm sorry, but someone faced with Russification hard keyboard for htc tilt2. Can not reassign key "fn".
cborisa said:
for those who wants to use russian and english standard keyboard (both hardware and software) with non-russian roms, i have extracted files from russian rom and put them in one cab file.
Just install the cab and you will get your standard sip with rus/eng languages and rus/eng hw keyboard.
Click to expand...
Click to collapse
Эта расскладка работает с rhod500 ???
Спасибо за русскую клаву, но возникла неожиданная проблемка.
После установки обоих КАБов раскладка железной клавиатуры больше не соответствует клавишам на них нарисованных. Fn тоже весь поменялся. Причем даже в Английской версии.
А еще не работает переключатель второй страницы символом в SIP (это когда нажимаешь 12#, а потом 1/2) - ничего не происходит, так что например обратную косую не достать...
Есть ли способ это вылечить? Может есть возможнось отредактировать раскладку.
У меня английский вариант AT&T HTC Tilt 2.
Заранее спасибо.
hi
hi..... i hv qtek 9000 .... cn u pl tell me hw shld i convert it fully to russian.....
not working on rhod100
S.V.I said:
I'm working on it already. trying to make a language pack that is not device dependant. already on the second version.
Problem solved:
attached is the language pack that will not affect the hardware keyboard no matter what the layout is. in fact you can have two languages simultaneously.
This should not affect any hardware settings for any device; but you only have the option of two languages unless you edit the reg setting:
[HKLM]Tegic/eT9/
Available languages: 0119,0109,XXXX (etc)
the more languages you add, the more you have to choose from.
(tested on the TMOUS Rhodium and did not screw up my hardware layout no matter the language setting; should also work for wwe roms as well.)
I have to say, it is slower than the optimised skin I made for the original keyboard... I might just have to spend another 3 days messing with this one
Click to expand...
Click to collapse
hello,
1st thanks a lot for your work (S.V.I and cborisa).
i have a RHOD100 device Asian version (with official signed "RUU_Rhodium_S2_hTC_Asia_WWE_2.07.707.1_Radio_Rhodium_4.49.25.91_Signed_Ship.exe" rom, and i'd like to have software russian keyboard (ezinput), only software 'cause my hard kb don't have russian layout. i have tried the "s.v.i. ru keys pack4.cab" from your post, it installed without errors, restarted the device, but after that my soft kb stoped to work, when i tried to open the kb, it was just keeping all the screen locked on last picture (notes or sms screen) and i could click only on the kb-button in the middle bottom, which was just empty oval white button. i couldn't see the kb nor type.
the hard kb still works perfectly. uninstalling your kb reverts all, everything works like it was before (without rus kb).
it looks like when i install your kb, it installs the dlls, but not the skin (pictures), so the dll starts up but the kb is not displayed.
my original ezinput is 2.1 and have ENG and chinese (pinyin, stroke, handwriting, and xt9 eng), if this can help.
i can hard reset the device if needed to test something, so can you please tell me what else can i try? (i don't want to flash a russian rom 'cause i like the english interface)
thanks in advance
space bar
cBorisa said:
For those who wants to use Russian and English standard keyboard (both hardware and software) with non-Russian ROMs, I have extracted files from Russian ROM and put them in one cab file.
Just install the cab and you will get your standard SIP with Rus/Eng languages and Rus/Eng hw keyboard.
Click to expand...
Click to collapse
Hello,
Thnx for that great thing Just one question, is there a way to remove a slash in the middle of the space bar? (линия посередине клавиши пробела, разделяющая её на 2 части) ?
Related
I wanna know if storage cards have unique IDs?
If so how I can get the ID in my program?
Thansk a lot.
SD and MMC cards have IDs that theoretically should be unique. You may look into SD-card driver's source code from PlatformBuilder to find how to get it.
I have no the sources. Where I can download them, please?
Thanks a lot.
you can download PlatformBuilder from Microsoft site. MS redesigned their site again, so my links are not working. You should look for a trial version of PlatformBuilder 4.20 or 5.0. You may install only the shared source code and skip all other stuff.
>you can download PlatformBuilder from Microsoft site. ...
Hmmm... Are you sure that the PlatformBuilder 4.20 or 5.0 should be available for download? I've searched through microsoft.com but with no success - I've found updates only, not the main package.
May be you can send the sources to me (or put them to a ftp or http for download)?
Thank you.
trial versions of PlatformBuilder 4.x and 5.0 are available from MS for free.
Here is a link for 5.0 - http://www.microsoft.com/downloads/...50-D311-4F67-9FB3-23E8B8944F3E&displaylang=en
You should register for a trial SN, or use my number K9GBM-YMT9V-997M8-GGWW4-VPQVG (it may be already expired)
I can't find 4.20, maybe it is removed from site.
Спасибо большое ;-)
Here is a link for PlatformBuilder 4.20:
http://www.microsoft.com/downloads/...c1-623b-481b-83b8-031129cf1594&DisplayLang=en
SN from 5.0 should work.
Ссылка на 4.20 сдохла Я так и не успел скачать. Похоже MS убрал (или спрятал) с сайта все, что касается 4.20 - раньшеможно было в поисковике что-то найти, сейчас - нет только 5я версия.
Качаю 5ю...
Один вопрос, там что ли исходники всего софта (который в ROM) есть?
Мне сейчас нужны исходники tmail.exe и note.dll. Или хотя бы сам note.dll. Реально их там найти?
Спасибо.
Там нет исходников от этих модулей.
i think this works for CF. MM
c and SD
can you provide the source code?
2 mamaich:
Там нет исходников от этих модулей.
Click to expand...
Click to collapse
Т.е. эти исходники вообще не реально найти?
2 Busch38:
Thanks a lot. But could you provide the sources, please?
GloomyFriar said:
Т.е. эти исходники вообще не реально найти?
Click to expand...
Click to collapse
Я их не нашел. Так что IDA тебе в руки.
The program uses DeviceIoControl function IOCTL_DISK_GET_STORAGEID.
Я их не нашел. Так что IDA тебе в руки.
Click to expand...
Click to collapse
Так и делаю. Но там куча вызовов внутрь разных dll, причем вложенные. А отладчик eVC имеем свойство сваливаться при
попытке пошагового выполнения dll из ROM ((
The program uses DeviceIoControl function IOCTL_DISK_GET_STORAGEID.
Click to expand...
Click to collapse
Thanks a lot!
If someone makes code for use this dll in VB.net please post it !
2 Busch38:
Thank you.
But how about the COMFlashSerialNumber.dll? Who have written the dll and if the dll sources are available?
2 mamaich:
Я их не нашел. Так что IDA тебе в руки.
Click to expand...
Click to collapse
Может сама dll у Вас есть? Платформ билдер мне наверное не судьба скачать. Очень много весит для моего дохлого коннекта .
Если есть эта длл (x86 и/или arm4), поделитесь пожалуйста.
Спасибо большое.
GloomyFriar said:
Если есть эта длл (x86 и/или arm4), поделитесь пожалуйста.
Click to expand...
Click to collapse
I recommend you to post messages in English.
You can extract the DLL you need from a ROM image of your device with dumprom tool - http://www.xs4all.nl/~itsme/projects/xda/dumprom.html
the dll was writen by Vasslili Philipov .
I used it 1st on a WinCe 3.0 device.
I tested the 1st app i posted on a 2003 PPC and it gives me for SD cards
( same type and manuf. ) different numbers.
Now i use another solution for Copyprotection and dont need Serial of Storagecard.
But if someone make this work with VB.Net , please post the code for use this dll.
2 mamaich:
You can extract the DLL you need from a ROM image of your device
Click to expand...
Click to collapse
And how to get the ROM image, please?
Here are Touch Cruise russian ROM reconstructed from dump of my device.
Post it here, because can't upload to xda ftp.
http://rapidshare.com/files/94890507/RUU_signed.zip
http://ifolder.ru/5497460
ROM 1.25.411.1 RUS
OS 5.2.1623 (18129.0.4.5)
The ROM is without any modifications.
Привет, огромное спасибо, сейчас опробую
Hi, lot of Thanks. Just try it
Все работает, но отсутствует полоса с буквами для быстрого выбора в контактах
It's work, but random Access in contacts is absent
Убери в Контакты->Параметры->Отображать алфавитный указатель, птичку. Но имей ввиду, полоса с буквами будет на латинском алфавите.
Get in Contact-> Settings-> Display index, birdie. But having in mind the bands with the letters will be on the Latin alphabet
andykha said:
Убери в Контакты->Параметры->Отображать алфавитный указатель, птичку. Но имей ввиду, полоса с буквами будет на латинском алфавите.
Get in Contact-> Settings-> Display index, birdie. But having in mind the bands with the letters will be on the Latin alphabet
Click to expand...
Click to collapse
Спасибо
Thanks
Can you make screenshots of what touch keyboards look like (with cyrillic layout) in this rom?
here is it
do i have also english keyboard in that rom?
yes, in that rom En/Ru Touch Keyboard.
Привет господа! Ставил на xda orbit 2 работает без глюков хотя оригинальная прошивка всё же быстрее. (субьективное мнение) спасибо!
installation
Thanks for file.
But how do I install it?
Maybe this is the same version, but this one is the offical:
http://rapidshare.com/files/1095339...5.65.30.04_1.58.21.23_polaris_murata_Ship.exe
Here is the post: http://forum.xda-developers.com/showpost.php?p=2170247&postcount=2
sykt said:
Here are Touch Cruise russian ROM reconstructed from dump of my device.
Post it here, because can't upload to xda ftp.
Click to expand...
Click to collapse
Exists official Russian RUU Polaris HTC RUS 1.25.411.1 radio sign 25.65.30.04 1.58.21.23R Ship
Уже давно есть официальная русская прошивка RUU Polaris HTC RUS 1.25.411.1 radio sign 25.65.30.04 1.58.21.23R Ship
Чем она хуже?
http://rapidshare.com/files/9768411...io_sign_25.65.30.04_1.58.21.23R_Ship.exe.html
Please, who do unlock by Imei-Check, can your upload your used "Key Files" from Imei-Check
You don't use another key files because it is created specifically for each IMEI in part!
I dont need them for unlock, but for CID repairing. And in this couse it is may be any file for any IMEI
I tell you from experience because I bought program.
If use a file made on the basis of IMEI risk the phone to break forever.
Sorry for my english language.
moalesipufos said:
I tell you from experience because I bought program.
If use a file made on the basis of IMEI risk the phone to break forever.
Sorry for my english language.
Click to expand...
Click to collapse
This phones was breaked but i repair them via JTAG, now they are working well, but only on WM6.1 & SPL 1.09.
I need key-files to recalculate CID block and completely repair phones. It is no mater for what EMEI they created, becouse i can change IMEI on any what i want and after CID recalculate, change them back.
From the discussion I had with the owner I understand that software program generates a file on the IMEI for each phone separately and can be used to unlock or repair telefon.Eu I bought because it damaged the phone and I managed to fix it than this soft.
It is best to buy the program(~25 euro).
moalesipufos said:
From the discussion I had with the owner I understand that software program generates a file on the IMEI for each phone separately and can be used to unlock or repair telefon.Eu I bought because it damaged the phone and I managed to fix it than this soft.
It is best to buy the program(~25 euro).
Click to expand...
Click to collapse
I dont want to buy this program, because i repair this phones and they work well, but have not CID blocks ( i change them with block from other phones, but it is wery long way to pick up the right block). I need this files only for experiements
Be careful not to create a Frankenstein of phones.
If you tight now might pay more in the future!
moalesipufos said:
I tell you from experience because I bought program.
If use a file made on the basis of IMEI risk the phone to break forever.
Sorry for my english language.
Click to expand...
Click to collapse
So why you don't want to give the key-file?
I have this problem with CID too...
Bumbon4ik said:
So why you don't want to give the key-file?
I have this problem with CID too...
Click to expand...
Click to collapse
Привет, я ведь тебе говорил уже, что твою проблему можно решить с помощью WSThttp://forum.xda-developers.com/attachment.php?attachmentid=79177&d=1207240513 , тем более что у тебя, насколько я помню есть оригинал СИДа...
Какая у тебя сейчас стоит Винда и ИПЛ, СПЛ...
И тем более зачем тебе *.unl файл от Тайфуна, если у тебя Торнадо, и к тому же каждый кей-файл привязан к ИМЕЙ, так что залить тебе его всё равно не удасться просто так, надо пользоваться WST...
SAXON13 said:
Привет, я ведь тебе говорил уже, что твою проблему можно решить с помощью WSThttp://forum.xda-developers.com/attachment.php?attachmentid=79177&d=1207240513 , тем более что у тебя, насколько я помню есть оригинал СИДа...
Какая у тебя сейчас стоит Винда и ИПЛ, СПЛ...
И тем более зачем тебе *.unl файл от Тайфуна, если у тебя Торнадо, и к тому же каждый кей-файл привязан к ИМЕЙ, так что залить тебе его всё равно не удасться просто так, надо пользоваться WST...
Click to expand...
Click to collapse
Google translation for the russian language :
Hi, I'm tell you already that your problem can be solved by WSThttp: / / forum.xda-developers.com/atta...7 & d = 1207240513, the more that you, as far as I can remember is the original SIDA ...
What you have now is Vinda and IPL, the CPF ...
And all the more so why should you *. unl file from typhoons, if you have a tornado, and it was a K-file should have adhered to so that you fill it all the same can not be simply, it is necessary to use WST ...
well but we can play to generate that key files, it would be very useful and analyze unlock from imei-check
SAXON13 said:
Please, who do unlock by Imei-Check, can your upload your used "Key Files" from Imei-Check
Click to expand...
Click to collapse
I have one if you want please leave me private message
Hi guys) Here is the forum you have a couple of months looking for Russian firmware for HTC Touch Viva (Opal). And as I understand, no one got around ..) I ask you, esteemed craftsmen from other countries, do it Russian miracle and to lay out here. I would greatly appreciate it! thanks!
чувакБ если на 4pda нету, то тут врядли тебе ктото сделает на русском..
З,Ы. уже сам спрашивал
Mod edit - translated by https://www.deepl.com/translator:
APPVER:K2001N_S212909.20210312 android version, went to menu and turned on 4K emulation after that all the buttons and me on the screen was doubled, tripled and impossible to do anything, help who knows what to do?
**********************************
версия андроида APPVER:K2001N_S212909.20210312, зашел в меню и как то включил эмуляция 4К после этого все кнопки и меня на экране стал удваиваться, утраиваться и ничего невозможно делать , помогите кто что знает , что делать?
Abdula68 said:
Mod edit - translated by https://www.deepl.com/translator:
APPVER:K2001N_S212909.20210312 android version, went to menu and turned on 4K emulation after that all the buttons and me on the screen was doubled, tripled and impossible to do anything, help who knows what to do?
**********************************
версия андроида APPVER:K2001N_S212909.20210312, зашел в меню и как то включил эмуляция 4К после этого все кнопки и меня на экране стал удваиваться, утраиваться и ничего невозможно делать , помогите кто что знает , что делать?
Click to expand...
Click to collapse
@Abdula68
As courtesy, I've translated your post above. With reference to rule no. 4 of the XDA Forum Rules, please post in English or add at least an English translation to your Russian posts. Thanks for your cooperation!
Spoiler: Rule No. 4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Regards
Oswald Boelcke
Senior Moderator