Database Users

At an insertion "Radio_Stack_Upgrade_v421" there w

Приветствую всех гуру этого сайта.
Извиняюсь если написано криво так как я из России.
У меня такая проблема:
При прошивке "Radio_Stack_Upgrade_v421" произошёл сбой и теперь мой XDA пишет :
Начинается процесс и на 1%
Flash Failed!
Press OK to restart your
device.
Пробовал "xda repair" непомогло.
Но после него хоть заработал PDA .
Правда заряд батареи не идёт.
HELP!
**********************************************
I welcome all gurus of this site.
I apologize if it is written crookedly as I from Russia.
At me such problem:
At an insertion "Radio_Stack_Upgrade_v421" there was a failure and now I XDA writes:
Process and on 1 % begins
Flash Failed!
Press OK to restart your
device.
Tried " xda repair " непомогло.
But after him(it) though has earned PDA.
The truth a charge of the battery does not go.
HELP!

Неужели никого нет кто может сказать что делать.
Телефон не может работать,ему надо загрузит GSM-Rom
Всевозможные попытки не привели к успеху.
Где можно найти GSM-Rom для разных версий ?
HELLLP!!!!!!!!
******************************************************
Really anybody is not present who can tell what to do(make).
Phone cannot work, it is necessary to it(him) will load GSM-Rom
Every possible attempts have not led to to success.
Where it is possible to find GSM-Rom for different versions?
HELLLP!!!!!!!!

Не думаю, что присутствующие здесь свободно понимают русский
Еслы ты из москвы то попробуй позвони мне 903 6256238. Возможно, я тебе помогу-но для этого мне будет нужен твой девайс на пару часов...

Comrades, enough Russian already !
Bi-lingual messages are fine, but please only post messages that at least have an English translation. Use the Private Message feature of this board if you wish to communicate in other languages.

Все только и могут что ругаться,"Русский не нравиться".
А советом помочь некому?
Что делать?
Нужен какойто восстанавливающий код.
Или кто знает как использовать Serial RS232?
Далеко я от Вас,нету сервиса по железу у нас.
Помогите!!!!!!!!!!!
****************************************************
All only also can what swear, " Russian to not like ".
And advice(council) to help there is nobody?
What to do(make)?
It is necessary What that a restoring code.
Or who knows as to use Serial RS232?
Far I from you, was not present service on iron at us.
Help!!!!!!!!!!!

Что такое PC Monitor в BOOT Loadere?
Где его взять?
*********************************************
What is PC Monitor in BOOT Loadere?
Where it(him) to take?

Oh my...
I'm afraid computer translations from Russion just haven't reached that point yet. Do we have a Russian-speaker in the room? If so, could such a Russian speaker please tell this person that RSU upgrades fail very often, that there are many diferent recovery techniques already posted on this forum, that we can offer little more advice than to try them all, and that we are sorry to lack the manpower and/or skills to translate all relevant messages to Russian.

Yes, we have one. Of course, my English is not perfect, but I hope it is better than average computer translator
The problem was (as frog describe me yesterday by phone (and my previous message was only invitation to this conversation):
- someone get "enter your SIM PIN code" message during radio upgrade process (RSU 4.21)
- after few unsuccessful attempts to enter PIN he decided to remove SIM from xda. During radio upgrade.
- As a result, radio was restarted while RSU not finished.
Currently frog experiments with this device to solve the "RSU 1% Flash fail" problem. As he told me this message pops up with any RSU version running on any WinCE version available around here.
I think currently radio rom on this device is completely inoperable. And the only way to restore it is to reflash radio stack via SD card (yes, I know that nobody have this "PC Monitor") or by hardware programmator.
In other words, the situation is similar to others who kill they radio rom. And the problem is no xda services in Russia (this device is not officially distributed in Russia)
Current FROG questions are (they were asked here not once in this forum):
- is anybody knows what is "PC Monitor" required to flash radio via SD card and where to find it.
- is anybody have docs about radio module schematics. As far as I understand, Frog have possibility to reprogram almost any ROM chip used in wide spreeded mobile phones with hardware programmator.

В общем так -Все попытки которые были доступны закончились неудачей.
Осталось прошивать ром только программатором.
где взять образ РОМ РАДИО который можно прошить непосредственно в ПЗУ.
***********************************************************************
In general so all attempts which were accessible have ended with failure.
It are necessary to stitch rum only hardware programmator.
Where to take an image ROM of RADIO which it is possible to stitch directly in a ROM. ***********************************************************************

Let me be translator again.
As you can guess, Frog failed to restore radio rom programatically.
So he wants to try to flash it directly to to radio flash chip with hardware blaster. And he asks if somebody have ROM image to flash
Yes I know that RSUpgrade.cp64 contains radio rom image. But is anywhere tool to convert these data into binary format?
Or: Is it possible to extract radio stack from SD card created with bootloader?
And now russian again:
1. Попробуй разобраться с форматом файла \windows\RSUpgrade.cp64, который находится на xda в процессе прошивки. Размер файла 64Mb, это судя по всему как раз образ рома.
2. Скинь образ радио стека на SD и попробуй содрать его xdarit'ом в файл. Если получится, то это наверняка будет как раз то что тебе нужно. Блин, говорила мне мама - учи английский

Так как "RSUpgrade.cp64" и есть образ ром,я это знаю точно.
а с какого адреса он записывается в РОМ,так как РОМ вмещает 32Мбит,а RSUpgrade.cp64 немного меньше.
************************************************************
As "RSUpgrade.cp64" also there is an image rum, I know it precisely.
And from what address he enters the name in RUM as RUM contains 32Мbit, and RSUpgrade.cp64 it is little bit less.
************************************************************

Help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Пожалуйста возможные ссылки на решения проблемы.
******************************************************
Please possible(probable) links to decisions of a problem.

Что делать ?
Кто ПОМОЖЕТ ?
Пожалуйста возможные ссылки на решения проблемы.
*****************************************************
What to do(make)?
Who WILL HELP?
Please possible(probable) links to decisions of a problem.

http://www.xda-developers.com/forum/viewtopic.php?t=2489&sid=8c1aea80a41318c77a50013b562fe4df

Where to take older versions of radio?
*****************************************************
Где взять более старые версии радио ?
:roll:

:roll:

Storage Card ID

I wanna know if storage cards have unique IDs?
If so how I can get the ID in my program?
Thansk a lot.

SD and MMC cards have IDs that theoretically should be unique. You may look into SD-card driver's source code from PlatformBuilder to find how to get it.

I have no the sources. Where I can download them, please?
Thanks a lot.

you can download PlatformBuilder from Microsoft site. MS redesigned their site again, so my links are not working. You should look for a trial version of PlatformBuilder 4.20 or 5.0. You may install only the shared source code and skip all other stuff.

>you can download PlatformBuilder from Microsoft site. ...
Hmmm... Are you sure that the PlatformBuilder 4.20 or 5.0 should be available for download? I've searched through microsoft.com but with no success - I've found updates only, not the main package.
May be you can send the sources to me (or put them to a ftp or http for download)?
Thank you.

trial versions of PlatformBuilder 4.x and 5.0 are available from MS for free.
Here is a link for 5.0 - http://www.microsoft.com/downloads/...50-D311-4F67-9FB3-23E8B8944F3E&displaylang=en
You should register for a trial SN, or use my number K9GBM-YMT9V-997M8-GGWW4-VPQVG (it may be already expired)
I can't find 4.20, maybe it is removed from site.

Спасибо большое ;-)

Here is a link for PlatformBuilder 4.20:
http://www.microsoft.com/downloads/...c1-623b-481b-83b8-031129cf1594&DisplayLang=en
SN from 5.0 should work.

Ссылка на 4.20 сдохла Я так и не успел скачать. Похоже MS убрал (или спрятал) с сайта все, что касается 4.20 - раньшеможно было в поисковике что-то найти, сейчас - нет только 5я версия.
Качаю 5ю...
Один вопрос, там что ли исходники всего софта (который в ROM) есть?
Мне сейчас нужны исходники tmail.exe и note.dll. Или хотя бы сам note.dll. Реально их там найти?
Спасибо.

Там нет исходников от этих модулей.

i think this works for CF. MM
c and SD

can you provide the source code?

2 mamaich:
Там нет исходников от этих модулей.
Click to expand...
Click to collapse
Т.е. эти исходники вообще не реально найти?
2 Busch38:
Thanks a lot. But could you provide the sources, please?

GloomyFriar said:
Т.е. эти исходники вообще не реально найти?
Click to expand...
Click to collapse
Я их не нашел. Так что IDA тебе в руки.
The program uses DeviceIoControl function IOCTL_DISK_GET_STORAGEID.

Я их не нашел. Так что IDA тебе в руки.
Click to expand...
Click to collapse
Так и делаю. Но там куча вызовов внутрь разных dll, причем вложенные. А отладчик eVC имеем свойство сваливаться при
попытке пошагового выполнения dll из ROM ((
The program uses DeviceIoControl function IOCTL_DISK_GET_STORAGEID.
Click to expand...
Click to collapse
Thanks a lot!

If someone makes code for use this dll in VB.net please post it !

2 Busch38:
Thank you.
But how about the COMFlashSerialNumber.dll? Who have written the dll and if the dll sources are available?
2 mamaich:
Я их не нашел. Так что IDA тебе в руки.
Click to expand...
Click to collapse
Может сама dll у Вас есть? Платформ билдер мне наверное не судьба скачать. Очень много весит для моего дохлого коннекта .
Если есть эта длл (x86 и/или arm4), поделитесь пожалуйста.
Спасибо большое.

GloomyFriar said:
Если есть эта длл (x86 и/или arm4), поделитесь пожалуйста.
Click to expand...
Click to collapse
I recommend you to post messages in English.
You can extract the DLL you need from a ROM image of your device with dumprom tool - http://www.xs4all.nl/~itsme/projects/xda/dumprom.html

the dll was writen by Vasslili Philipov .
I used it 1st on a WinCe 3.0 device.
I tested the 1st app i posted on a 2003 PPC and it gives me for SD cards
( same type and manuf. ) different numbers.
Now i use another solution for Copyprotection and dont need Serial of Storagecard.
But if someone make this work with VB.Net , please post the code for use this dll.

2 mamaich:
You can extract the DLL you need from a ROM image of your device
Click to expand...
Click to collapse
And how to get the ROM image, please?

Last Rom

There's one for RUSSIAN qtek s200 (2.9.7). Although im russian i prefer WWE. I wonder if there's latest rom available in WWE? And what improvements have those installed it noticed?

I've had that version since my unit was delivered (quite a while ago), so unfortunately I cannot tell what has changed, but it should be possible to find, since I have the WWE version on my S200..
Hope you'll find it!

So noone knows if there's a firmware available anywhere?

Follow the tread: http://forum.xda-developers.com/viewtopic.php?t=49298
RU 2.9 is very slow and buggy, IMHO. I am running that ^^^ one... Please, be advised that you may have some problems if you decide to downgrade after that...

J.Walker said:
Follow the tread: http://forum.xda-developers.com/viewtopic.php?t=49298
RU 2.9 is very slow and buggy, IMHO. I am running that ^^^ one... Please, be advised that you may have some problems if you decide to downgrade after that...
Click to expand...
Click to collapse
I dont want to have RU one, i downloaded that one already, but i think it's useless. I want WWE!

zaitsman said:
J.Walker said:
Follow the tread: http://forum.xda-developers.com/viewtopic.php?t=49298
RU 2.9 is very slow and buggy, IMHO. I am running that ^^^ one... Please, be advised that you may have some problems if you decide to downgrade after that...
Click to expand...
Click to collapse
I dont want to have RU one, i downloaded that one already, but i think it's useless. I want WWE!
Click to expand...
Click to collapse
Just follow the tread, that is latest (so far) Dopod WWE ROM. IMHO, the best one so far.

Блин, мужик, мне нужен ROm 2.15 От Dopodа, я про него давно знаю, я хочу ром 2.9 WWE от кого угодно.
Damn, mate, i don't need Dopod's 2.15 ROM, i know 'bout it for a long while now, i want to find 2.9 WWE ROM from any vendor.

zaitsman said:
Блин, мужик, мне нужен ROm 2.15 От Dopodа, я про него давно знаю, я хочу ром 2.9 WWE от кого угодно.
Damn, mate, i don't need Dopod's 2.15 ROM, i know 'bout it for a long while now, i want to find 2.9 WWE ROM from any vendor.
Click to expand...
Click to collapse
Так ты бы, блин, написал сразу, что тебе нужен именно 2.9, или именно от S200, а то вопит "хочу WWE" и все Полмысли выразил, вкатал "последний WWE", в то время, как 2.9 - порядочное старье. И еще и ругается
На тутошнем ftp лежит 2.9.7 WWE, если будет кочевряжиться на пример несовпадения языка и не вставать, то шить придется утилитой NoVendorID.
ftp://xda:[email protected]_2090724_20907106_020720_QtekWWE_Ship.exe

J.Walker said:
zaitsman said:
Блин, мужик, мне нужен ROm 2.15 От Dopodа, я про него давно знаю, я хочу ром 2.9 WWE от кого угодно.
Damn, mate, i don't need Dopod's 2.15 ROM, i know 'bout it for a long while now, i want to find 2.9 WWE ROM from any vendor.
Click to expand...
Click to collapse
Так ты бы, блин, написал сразу, что тебе нужен именно 2.9, или именно от S200, а то вопит "хочу WWE" и все Полмысли выразил, вкатал "последний WWE", в то время, как 2.9 - порядочное старье. И еще и ругается
На тутошнем ftp лежит 2.9.7 WWE, если будет кочевряжиться на пример несовпадения языка и не вставать, то шить придется утилитой NoVendorID.
ftp://xda:[email protected]_2090724_20907106_020720_QtekWWE_Ship.exe
Click to expand...
Click to collapse
Блин Читаем текст:
I wonder if there's latest rom available in WWE?
Click to expand...
Click to collapse
Я хотел бы знать, доступен ли последний ROM в WWE?
Впрочем, не важно. А важно тогда вот что, раз ты спец,- какая версия САМАЯ последния, доступная в WWE (2.9.7 имхо новее, чем 2.15, нет?)?[/b][/quote]

Последних ROMов много, разных. Тебе надо именно Qtek или пофигу? Если именно Qtek, то WWE свежее 2.9 я не видел. Если пофигу - то последний WWE - это 2.15 для Dopod. Других более свежих WWE - не знаю, если бы были - здесь бы уже вовсю обсуждались их баги и глюки.
Ждем 2.2x с нетерпением.
Это все, больше ничего не знаю

"Key File" from Imei-Check

Please, who do unlock by Imei-Check, can your upload your used "Key Files" from Imei-Check

You don't use another key files because it is created specifically for each IMEI in part!

I dont need them for unlock, but for CID repairing. And in this couse it is may be any file for any IMEI

I tell you from experience because I bought program.
If use a file made on the basis of IMEI risk the phone to break forever.
Sorry for my english language.

moalesipufos said:
I tell you from experience because I bought program.
If use a file made on the basis of IMEI risk the phone to break forever.
Sorry for my english language.
Click to expand...
Click to collapse
This phones was breaked but i repair them via JTAG, now they are working well, but only on WM6.1 & SPL 1.09.
I need key-files to recalculate CID block and completely repair phones. It is no mater for what EMEI they created, becouse i can change IMEI on any what i want and after CID recalculate, change them back.

From the discussion I had with the owner I understand that software program generates a file on the IMEI for each phone separately and can be used to unlock or repair telefon.Eu I bought because it damaged the phone and I managed to fix it than this soft.
It is best to buy the program(~25 euro).

moalesipufos said:
From the discussion I had with the owner I understand that software program generates a file on the IMEI for each phone separately and can be used to unlock or repair telefon.Eu I bought because it damaged the phone and I managed to fix it than this soft.
It is best to buy the program(~25 euro).
Click to expand...
Click to collapse
I dont want to buy this program, because i repair this phones and they work well, but have not CID blocks ( i change them with block from other phones, but it is wery long way to pick up the right block). I need this files only for experiements

Be careful not to create a Frankenstein of phones.
If you tight now might pay more in the future!

moalesipufos said:
I tell you from experience because I bought program.
If use a file made on the basis of IMEI risk the phone to break forever.
Sorry for my english language.
Click to expand...
Click to collapse
So why you don't want to give the key-file?
I have this problem with CID too...

Bumbon4ik said:
So why you don't want to give the key-file?
I have this problem with CID too...
Click to expand...
Click to collapse
Привет, я ведь тебе говорил уже, что твою проблему можно решить с помощью WSThttp://forum.xda-developers.com/attachment.php?attachmentid=79177&d=1207240513 , тем более что у тебя, насколько я помню есть оригинал СИДа...
Какая у тебя сейчас стоит Винда и ИПЛ, СПЛ...
И тем более зачем тебе *.unl файл от Тайфуна, если у тебя Торнадо, и к тому же каждый кей-файл привязан к ИМЕЙ, так что залить тебе его всё равно не удасться просто так, надо пользоваться WST...

SAXON13 said:
Привет, я ведь тебе говорил уже, что твою проблему можно решить с помощью WSThttp://forum.xda-developers.com/attachment.php?attachmentid=79177&d=1207240513 , тем более что у тебя, насколько я помню есть оригинал СИДа...
Какая у тебя сейчас стоит Винда и ИПЛ, СПЛ...
И тем более зачем тебе *.unl файл от Тайфуна, если у тебя Торнадо, и к тому же каждый кей-файл привязан к ИМЕЙ, так что залить тебе его всё равно не удасться просто так, надо пользоваться WST...
Click to expand...
Click to collapse
Google translation for the russian language :
Hi, I'm tell you already that your problem can be solved by WSThttp: / / forum.xda-developers.com/atta...7 & d = 1207240513, the more that you, as far as I can remember is the original SIDA ...
What you have now is Vinda and IPL, the CPF ...
And all the more so why should you *. unl file from typhoons, if you have a tornado, and it was a K-file should have adhered to so that you fill it all the same can not be simply, it is necessary to use WST ...

well but we can play to generate that key files, it would be very useful and analyze unlock from imei-check

SAXON13 said:
Please, who do unlock by Imei-Check, can your upload your used "Key Files" from Imei-Check
Click to expand...
Click to collapse
I have one if you want please leave me private message

Help me GPS run? Im russian!!!

Greetings I from Russia. At Me HTC Shift. Has established the driver for GPS from gps.cab + 2.reg a file. Ports do not open. How to force to work GPS without a reinsertion. Insertion ROM I do not wish to change as Russian is not present.

Привет. Ну что gps заработал?

propsan said:
Привет. Ну что gps заработал?
Click to expand...
Click to collapse
Да прошился и всё заработало но сигнал слабый

losslamb said:
Да прошился и всё заработало но сигнал слабый
Click to expand...
Click to collapse
о пацаны
скажите мне однозначно плиз. у меня русифицированый shift. если я прошью какуюнибудь тутошнюю прошивку - WM станет неруской? (у них же WWE все) или нет? как то потом русифицировать можно.

miox said:
о пацаны
скажите мне однозначно плиз. у меня русифицированый shift. если я прошью какуюнибудь тутошнюю прошивку - wm станет неруской? (у них же wwe все) или нет? как то потом русифицировать можно.
Click to expand...
Click to collapse
Станет англиским, а руссика нет и не будет я думаю

losslamb said:
Greetings I from Russia. At Me HTC Shift. Has established the driver for GPS from gps.cab + 2.reg a file. Ports do not open. How to force to work GPS without a reinsertion. Insertion ROM I do not wish to change as Russian is not present.
Click to expand...
Click to collapse
1. you mast dowland ShiftHardSPLFinal.exe at first you mast full registration on xda-developers ./ http://forum.xda-developers.com/showthread.php?t=406606 /
2. run on your shift ShiftHardSPLFinal.exe at first connect vista to wm-shift .
3. next run ROM for example /http://forum.xda-developers.com/showthread.php?t=518441 / the some that p.2
i finito GPS is OK .
on
xda-developers I found many rusian ROM on shift. You mast tray .