Hey Guys,
I've just upgraded my rom from 1.48 to 1.66 and now my sim contacts won't show anymore. They are there because when I click somewhere that one shows but It's a pain in the a** to call somebody. so I searched for a solution. HTC Sim contact fix....ONLY 1.59 and Less...... *Sigh* So I don't know what else to do.
Can someone plz help me!?!?!
oh and my phone doesn't block when I put it to my ear when I'm calling...
Still need help on this....
Maajelvv said:
Still need help on this....
Click to expand...
Click to collapse
try this: on home tab go to phone-more-menu-Import sim-contacts...
and what do you mean by not block when holding your device against your ear?
does the screen turns off ore not?
See my Sing
Related
hey people....
i was just upgradeing the radio stack to v.4.21 beacuse mine was v.4.20 and as i was installing it on the xda, it said "Upgrade failes" and crashed. I then tried a soft and hard reset and it just crashes again.
Can some one PLEASE help me...
Thank you so much
jay
Apart from a sof and hard reset, what else have you tried to resolve the problem?
nothing
i dont know how.....i have had the XDA for 1 day
any advice i would be VERY greatfull....
even if u think it may not work.
thank you so much
jay
well looks like you may well have a dead one day old xda on your hands there jay
no dont say that....
its not dead.....its just sleeping (hopefully)
please help any body...*does a jig to get people to help* lol
jay
THE PROPHETOR! said:
"it said "Upgrade fails" and crashed. I then tried a soft and hard reset and it just crashes again."
Can some one PLEASE help me...
Click to expand...
Click to collapse
Crashed!!!!
What is being displayed on the screen?
Are you able to use your XDA at all?
Will it still connect to your PC via ActiveSync?
the answer to all those questions is no....
no activesync
no using the xda
the only thing that is being displayed is the startup o2 sign and in the left hand bottom corner it says
g
r
s 31.85834 (or some number)
and then it goes to a blank white page.....
it keeps swapping back and forth from these two pages
thanks
jay
Are you able to get into the bootloader?
press and hold to on/off button while soft-resetting.
Do you have a SD card reader?
Also, where did you get the xda from, just incase!?!
im gonna try the bootloader thing....but what do i do if it works (im waiting for it to charge up abit before i do that) although i dont think it is charging
i dont have a sd card yet....
o2 online....i have insurance, i think (hope) they will change it....but im going away tommorow for 4 weeks....and im stuck without a phone...so i wanted to know if there was a way that i could reinstall it again...
thanks again york for your help
jay
hey yeah i can get to bootloader
wallaby bootloader v5.22
what do i do?
it siad there is a gsm erorr?
thanks
jay
Right, well it's a start, unfortunatly without an SD card reader there is nothing that I know that will fix this problem, as you cannot use Activesync without the os loading.
I've had a quick look around the forums but all related articles on fixes suggest the need for a card reader.
When you did the upgrade, did you remember to remove the power supply first?.
It seems that leaving the power supply attached while upgrading the radio causes an internal configuration error.
If no one else here can help with your problem, you will have to send it back to O2, they will replace it for new, however, if they do kick up a fuss, remind them of the Sale of Goods Act (Amendment) 2003.
Sorry, that's about as much as I can do mate. Good luck, and don't be but off the xda by this problem, I got mine of ebay and broke the screen within a week, had to fork out another £130 for a new screen, but I'm very glad I did.
ok thanks york......
i will give o2 a call.....
thanks
jay
THE PROPHETOR! said:
hey yeah i can get to bootloader
wallaby bootloader v5.22
what do i do?
it siad there is a gsm erorr?
thanks
jay
Click to expand...
Click to collapse
Great now press the Calender button, that should put you in the GSM
bootloader mode. From there run some of the options ect.., try changing your band to 900 and see if that helps also try turning the radio off as that might let your XDA bootup.
hi....i tried that and it kep saying....
gsm turn ON fail!!
any more ideas?
thanks
Hello,
I have this problem...
it isnt the flightmode(turned off)..but if turn on the p3600 it has no phone services. it has the antenna and a !
it means no phone services?
sim is right installed, it works fine in my other telephone..??
The phone option somethimes it doenst work and somethimes it needs a reset because the phone screen will not close..
plz if there is anyone who can help me..
greetz
I had the same problem.
My problem was the sim himself... was some how in bad shape.
I've notice this because i put it another sim and the phone was all right.
So, try another one.
pena_leve said:
I had the same problem.
My problem was the sim himself... was some how in bad shape.
I've notice this because i put it another sim and the phone was all right.
So, try another one.
Click to expand...
Click to collapse
it helped tnx
Alright, so i have a telus diamond, and when somebody calls (most of the time) i press ANSWER (the big green button) and all it does is silence the ringer, and it won't start the conversation, i wait until the person on the other line finally hangs up then i gotta call them back, this has happend previously so i brought it to telus, they gave me a new one and its happening again!!! i cant see why? the only programs i have that change settings is Diamond Tweak, and i've looked several times, and i barely changed anything in it. Can somebody help me? I'd rather not bring it to them again and seem like the boy who cried diamond
Are you sure you are actually are hitting the green answer button, and not the "silence call" button? THey are quite close. Check it out.
no, i see the button flash, and i've tried pushing the hardware button as an alternative, but its still unsuccessfull most times
I had this issue as well. I did a swap and am still having the issue. I'm going to try a hard-reset at some point and then just monitor it to see if it continues to happen.
If it does, back to Telus to see what they can do for me.
Hmm.. now that U mention is, I have it too.
Mine's bought during launch in Singapore. It happens once in a while, but I didn't bother finding a solution to that.
Sounds like the same problem I had: http://forum.xda-developers.com/showthread.php?t=430980
Post #7 was a suggestion I tried. It apparently solved the problem for me.
gamer007 said:
Sounds like the same problem I had: http://forum.xda-developers.com/showthread.php?t=430980
Post #7 was a suggestion I tried. It apparently solved the problem for me.
Click to expand...
Click to collapse
same here ppl brought it in india
drhades said:
Alright, so i have a telus diamond, and when somebody calls (most of the time) i press ANSWER (the big green button) and all it does is silence the ringer, and it won't start the conversation, i wait until the person on the other line finally hangs up then i gotta call them back, this has happend previously so i brought it to telus, they gave me a new one and its happening again!!! i cant see why? the only programs i have that change settings is Diamond Tweak, and i've looked several times, and i barely changed anything in it. Can somebody help me? I'd rather not bring it to them again and seem like the boy who cried diamond
Click to expand...
Click to collapse
there's a huge thread on the sprint forum about this problem too...
this problem is extremely annoying... and nobody seems to know the cause..
Wow, i guess i'm not the only one, thats good i sopose, i'd rather not bring it back to them and get a third diamond... i'm thinking of maybe finding out about getting a totally different phone... i love the diamond, but its pissing me off, not only that, it gets right slow sometimes... maybe im too hard on it, i dont know... but all they have at telus for ppc is HTC Touch (elf) and Htc touch dual i think...
gamer007 said:
Sounds like the same problem I had: http://forum.xda-developers.com/showthread.php?t=430980
Post #7 was a suggestion I tried. It apparently solved the problem for me.
Click to expand...
Click to collapse
I cant get into those settings,or i just really dont know how.. help?
try importing the reg file (use phm registry editor- it's free) in post #12
http://forum.xda-developers.com/showpost.php?p=2738077&postcount=12
I am having this same problem and its driving me insane! Does anyone know if Sprint has addressed this yet? Is there anything I can do?
Hi all,
I hope someone can answer my question, i have a diamond from vodaphone, ROM 1.93.161.2 WWE, the problem is that when i get a call the phone seems to answer itself, i guess that it is because the touch screen is enabled to answer the phone and it is getting pressed by the outer cover/pouch either in my pocket or on removal.
So, is it possible to make the phone answer a call by the hard buttons only??
if so please tell me how, i have done a search and spent hours trying to find a way on the phone!!
i'm not to clued up on updating ROM's ect so hopefully there is an easier way or someone has a step by step explination.
Thanks,
Dan.
To avoid accidental pickups, look here....
http://forum.xda-developers.com/showthread.php?t=464286&highlight=slide+phone
It's what most of us use here on this forum...
i'm sure this is not your problem but just to make sure.
go to phone settings and click on the more tab. make sure you don't have "automatic pickup" enabled.
Dan4521 said:
Hi all,
I hope someone can answer my question, i have a diamond from vodaphone, ROM 1.93.161.2 WWE, the problem is that when i get a call the phone seems to answer itself, i guess that it is because the touch screen is enabled to answer the phone and it is getting pressed by the outer cover/pouch either in my pocket or on removal.
So, is it possible to make the phone answer a call by the hard buttons only??
if so please tell me how, i have done a search and spent hours trying to find a way on the phone!!
i'm not to clued up on updating ROM's ect so hopefully there is an easier way or someone has a step by step explination.
Thanks,
Dan.
Click to expand...
Click to collapse
This is exactly what you need:
http://forum.xda-developers.com/showthread.php?t=425650&highlight=answerkey+disabler
Install the cab and the touch screen is disabled when recieving a call. You can then only answer or reject the call with the hardware buttons.
cheers
Thankyou very much to all that helped!!
Cheers,
Dan
Hi all.....i am facing a strange problem with my ElfIn.....when some one calls on my phone they say that its ringing but i can not see any call on my phone...just now my friend called me for 10-15 time but there is no call alert or ring on my phone...even there are no calls in miss call list.
guys please help me out....how to over come this problem??
I asked one of the mobile repairing guy , he said its a network IC problem.....is it true???
Check the settins menu and go to phone, select ring and vibrate
Badwolve1 said:
Check the settins menu and go to phone, select ring and vibrate
Click to expand...
Click to collapse
Everything i did....but same probl. is there......its not due to ring/vibratetor but it is not showing anything updates like there was a miss call or anything like that but the person calling me gets a message that there was no answer from my side...
try this one out.
1)think there is some problem with your antenna .... try replacing it if u have warranty or wait for some more comments....
2)wat rom are u using is it shipped rom or u flashed it with some rom available.if so try reflashing it
3)try hard resetting..
this may work...
n mainly go to some service center n not to some guys.
try flashing other radio versions
it might work
if not then gud luck