[REQ][HELP] Answering Phone Calls?? - Touch Diamond, MDA Compact IV Themes and Apps

Alright, so i have a telus diamond, and when somebody calls (most of the time) i press ANSWER (the big green button) and all it does is silence the ringer, and it won't start the conversation, i wait until the person on the other line finally hangs up then i gotta call them back, this has happend previously so i brought it to telus, they gave me a new one and its happening again!!! i cant see why? the only programs i have that change settings is Diamond Tweak, and i've looked several times, and i barely changed anything in it. Can somebody help me? I'd rather not bring it to them again and seem like the boy who cried diamond

Are you sure you are actually are hitting the green answer button, and not the "silence call" button? THey are quite close. Check it out.

no, i see the button flash, and i've tried pushing the hardware button as an alternative, but its still unsuccessfull most times

I had this issue as well. I did a swap and am still having the issue. I'm going to try a hard-reset at some point and then just monitor it to see if it continues to happen.
If it does, back to Telus to see what they can do for me.

Hmm.. now that U mention is, I have it too.
Mine's bought during launch in Singapore. It happens once in a while, but I didn't bother finding a solution to that.

Sounds like the same problem I had: http://forum.xda-developers.com/showthread.php?t=430980
Post #7 was a suggestion I tried. It apparently solved the problem for me.

gamer007 said:
Sounds like the same problem I had: http://forum.xda-developers.com/showthread.php?t=430980
Post #7 was a suggestion I tried. It apparently solved the problem for me.
Click to expand...
Click to collapse
same here ppl brought it in india

drhades said:
Alright, so i have a telus diamond, and when somebody calls (most of the time) i press ANSWER (the big green button) and all it does is silence the ringer, and it won't start the conversation, i wait until the person on the other line finally hangs up then i gotta call them back, this has happend previously so i brought it to telus, they gave me a new one and its happening again!!! i cant see why? the only programs i have that change settings is Diamond Tweak, and i've looked several times, and i barely changed anything in it. Can somebody help me? I'd rather not bring it to them again and seem like the boy who cried diamond
Click to expand...
Click to collapse
there's a huge thread on the sprint forum about this problem too...
this problem is extremely annoying... and nobody seems to know the cause..

Wow, i guess i'm not the only one, thats good i sopose, i'd rather not bring it back to them and get a third diamond... i'm thinking of maybe finding out about getting a totally different phone... i love the diamond, but its pissing me off, not only that, it gets right slow sometimes... maybe im too hard on it, i dont know... but all they have at telus for ppc is HTC Touch (elf) and Htc touch dual i think...

gamer007 said:
Sounds like the same problem I had: http://forum.xda-developers.com/showthread.php?t=430980
Post #7 was a suggestion I tried. It apparently solved the problem for me.
Click to expand...
Click to collapse
I cant get into those settings,or i just really dont know how.. help?

try importing the reg file (use phm registry editor- it's free) in post #12
http://forum.xda-developers.com/showpost.php?p=2738077&postcount=12

I am having this same problem and its driving me insane! Does anyone know if Sprint has addressed this yet? Is there anything I can do?

Related

Disabling the annoying green-phone-light

Hi there y'all,
my xda neo / Prophet is always blinking green while he has got an telephone-connection with my provider and i hate that blinkin light, especially in my bedroom.
Has anyone got an idea how to disable this? Is there any possibility via Registry?
Thanks for any help!
a piece of black tape perhaps?
Try
HKLM\Drivers\BuiltIn\AllLEDMgr\Index
change the value to 0
__________________
I used LED Toggle which I attached. It works fine.
You do have to watch out though: disconnect your phone from power or your computer before you activate it. Using it once stops the light and using it again turns it back on.
It looks like the effect is gone after a softreset.
And another thing: some hours after using it my phone didn't respond at all for a few minutes. The only solution was a soft reset. This has happened several times now and when I keep the light on it seems to be working normal again. I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Jayxz said:
I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Click to expand...
Click to collapse
Thanks Jay, your little program works perfect. I'll see if i'll get the same problem and report it here
niketkumar, thanks for your help. I first try Jays Software, if i get the same problems i'll use your registry hack.
Thanks to both of you from my girlfriend, too - cause now it's less greener in our bedroom
So? Any news?
I stopped using the software and my phone hasn't crashed once. How's yours behaving?
Had the exact same problem, when using LED Toggle my device occasionally hangs. Since I stopped using it everything works just fine..
Man, that just sucks. I was so happy to be rid of that stupid light.
Now about that registry hack. I can find everything up to "\builtin" but the rest (AllLEDMgr\Index) doesn't exist. Do I have to create a new folder with an index file which has the value set to 0 or what?
Don't remember if I've tried the registry hack mentioned above, but I followed the thread about this issue in Modaco and tried numerous registry hacks before ending up with the only solution (that I'm aware of) that currently seems to work.
Which, unfortunately is the LED Toggle attached above, which in hand makes your device quite unstable..
So, back to the drawing board guys - hope someone finds a solution!
Just checked the corresponding thread on Modaco (http://www.modaco.com/index.php?showtopic=243948&st=0) and indeed this solution is not working flawlessly on our beloved Prophets..
Why not just place it face down on your dresser at night?
this has to be one of the dumbest hack request on the site!!! do as blunt man said and put it face down if it's that annoying!
gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
maybe you just don't understand it
gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
this has to be one of the dumbest comments i ever got in an professionals-board.
Jayxz, any of the workarounds i found generated problems so i just painted the light black. Not really the best solution but it sucked so badly
I find the green light annoying too, but i'd still like to have the orange warning when i received a msg or missed a call....
I hope that somebody could find a working solution for this
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
seneca said:
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
Click to expand...
Click to collapse
i tried this one but a taskmanager shows that ~10% cpu-usage is caused by this tool
enabling led blinking
Hi to All,
my HTC TYTN II always blinking green while he has got on phone-connection with my provider, and i love that. But now i have xperia and...no blinking on phone connection. It is possible to made it blinking when phone connection with provider is on

Broken Vibrate?

I got my blackstone yesterday. Excitedly opened it up, fiddled with it a while, and flashed a new rom. It was a while before i realised that the phone woudlnt vibrate. Im pretty sure its a hardware fault, but just wanted to check here to make sure I havent missed something.
The phone wont vibrate, even when being called / txted with vibrate mode on. I also understand the hardware buttons are sposed to have some kind of haptic feedback or minivibrate, but this doesent work either.
I searched through all the settings, and couldnt find any magical turn on vibrate feature buttton. Vibrate notification is definately turned on, and so is the vibrate profile. I inittialy installed Panoshas Black Pearl rom. I tried a hard reset, and then also flashed the Dutty rom, and finally the original rom to see if it that worked.
Can anyone point out an obvious mistake ive made? Or am I gonna have to send my lovely blackstone back?
Thnx in advance.
Hmmm...you've already tried flashing a new rom and if you still have the same problem, send it in. It's still spanking new, shouldn't be a problem getting it rectified....or better yet ....replaced!
Was it vibrating when you recieve it, on it's original ROM ?
sectorlord said:
Was it vibrating when you recieve it, on it's original ROM ?
Click to expand...
Click to collapse
I only noticed that it wasnt after I flashed the rom, so altho im fairly certain i dont remember it ever vibrating, i cant be absolutely certain.
[email protected] said:
Hmmm...you've already tried flashing a new rom and if you still have the same problem, send it in. It's still spanking new, shouldn't be a problem getting it rectified....or better yet ....replaced!
Click to expand...
Click to collapse
thnx for your response, i think ill probably do that.
its pretty annoying to have to send it back already lol, but its worth it to have a working vibrate.
A Second Opinion
Yep, I got my Blackstone a week ago today and it vibrated just fine out the box. I have not flashed any new ROMs, but I have installed plenty of programs including .net 3.5 and mobilmagic button stuff and hd tweak, installed and uninstalled advanced config and a few keyboards, the list goes on. Long story short, my vibrate doesn't work either! I think this is due to my tampering with it though, I really do. Also, I saw another post where someone had the same problem, he ended up getting his to work after playing with .net 3.5, hard resetting more than once and soft resetting too. So try that, let me know what you find out! I plan to hard reset and flash new ROMs soon, so I figured maybe these problems would go away then. Oh and, anybody else have a problem where their end key doesn't end the call, ? This is such a tinkerer's toy, lol!
Probably a good warning about flashing ROMs! Did you backup your original ROM? I think you will need to restore your original ROM before you send it back for "repair". (Otherwise it is likely you will be charged for any work/replacement - justifiably!)
Before you despair, what ROM did you flash it with? Have you contacted the developer about it? It may be a setting in a tweak you don't know you've installed. Have you tried playing Tweeter (the vibration feedback when the ball collides with a wall will indicate a working/non-working vibrator).
Rather than just offer bad news to you and tell you it's your own fault, here is a helpful tut on How to backup ROM, albeit a little late maybe. It may not be all doom and gloom - some kind soul may be able to offer you their backup ROM (particular to your mobile provider) which you can use to restore it to factory default before testing for the vibrate and/or sending it back for a fix. Who is your provider and what original ROM do you need?
blacksage said:
Yep, I got my Blackstone a week ago today and it vibrated just fine out the box. I have not flashed any new ROMs, but I have installed plenty of programs including .net 3.5 and mobilmagic button stuff and hd tweak, installed and uninstalled advanced config and a few keyboards, the list goes on. Long story short, my vibrate doesn't work either! I think this is due to my tampering with it though, I really do. Also, I saw another post where someone had the same problem, he ended up getting his to work after playing with .net 3.5, hard resetting more than once and soft resetting too. So try that, let me know what you find out! I plan to hard reset and flash new ROMs soon, so I figured maybe these problems would go away then. Oh and, anybody else have a problem where their end key doesn't end the call, ? This is such a tinkerer's toy, lol!
Click to expand...
Click to collapse
thanks for the tip. i fiddled with .net framework 3.5 and more hard resets, and altho i have installed hdtweak and advconfig a couple times, ive done multiple clean flashes without them and it still dont work. in fact - as i said above, im 90% sure it never did work, so im convinced its a hardware fault.
i hope yours wroks after a rom flash, but i think mine is gonna have to go back...
Nerdino said:
Probably a good warning about flashing ROMs! Did you backup your original ROM? I think you will need to restore your original ROM before you send it back for "repair". (Otherwise it is likely you will be charged for any work/replacement - justifiably!)
Before you despair, what ROM did you flash it with? Have you contacted the developer about it? It may be a setting in a tweak you don't know you've installed. Have you tried playing Tweeter (the vibration feedback when the ball collides with a wall will indicate a working/non-working vibrator).
Rather than just offer bad news to you and tell you it's your own fault, here is a helpful tut on How to backup ROM, albeit a little late maybe. It may not be all doom and gloom - some kind soul may be able to offer you their backup ROM (particular to your mobile provider) which you can use to restore it to factory default before testing for the vibrate and/or sending it back for a fix. Who is your provider and what original ROM do you need?
Click to expand...
Click to collapse
yeah - i definately played tweeter even before flashing any roms, and there was no vibrate - so i guess that proves it really is the hardware.
i bought my phone from mobilephonesdirect, but have my rom backed up, so should be ok.
ta for the offer tho.
Mine was the opposite, it wouldn't stop vibrating, even when switched off.
You had to take the battery out to get it to stop.
mikemod said:
Mine was the opposite, it wouldn't stop vibrating, even when switched off.
You had to take the battery out to get it to stop.
Click to expand...
Click to collapse
lol - i will trade?
You could try and use TouchResponse. That program gives a vibration response with every touch on the screen. If not, indeed send it in.
Regards,
shthpnz said:
You could try and use TouchResponse. That program gives a vibration response with every touch on the screen. If not, indeed send it in.
Regards,
Click to expand...
Click to collapse
thnx for the response.
sadly ive tried that as well and no dice...
im pretty sure I have the same problem
hey, I have the same problem and hard resetting and all that didn't help. Where did you buy yours, think they came from the same place? Are you sending back to HTC, how quickly did they say they could fix it and send it back?
Thanks
blacksage said:
hey, I have the same problem and hard resetting and all that didn't help. Where did you buy yours, think they came from the same place? Are you sending back to HTC, how quickly did they say they could fix it and send it back?
Thanks
Click to expand...
Click to collapse
got mine from
mobilephonesdirect.co.uk
havent been able to get throught them on the phone yet.
ill keep you updated if you want.
I appreciate that
yes I would love for you to keep me updated, I purchased mine through ebay from addictedtophones.com, which is out of California. They seemed like nice people but they sure aren't wanting to help my broken vibrate after only 8 days! That is just sad my friend. I have also contacted UK and US support and HTC global repair service. They have indicated that they are looking in to it. Apparently the US section may not have the resources to work on the device. I requested that they replace the phone, if they couldn't work on it ASAP, the person seemed to agree and put the request forward. I hope that helps your situation. I spent too much for a broken stone!
Levi
updated
I received my new replacement Touch HD in the mail a little bit ago, it vibrates. It must have been a hardware issue best I can tell. I just about had to send it off to HTC, but I finally got the retailer to replace it. It actually took a lot of crap just to get HTC USA GLOBAL repair center to want to accept the idea but, I called UK HTC and they called HQ in Taiwan or somewhere and got something done. So if you need some help, Ive got a few contacts that can help, anyone can just let me know. I hope this doesn't become a widespread infection.
blacksage
I'd say it's probably a hardware issue. My first HD also didn't vibrate, and had to exchange for a new one. Probably some issues with one of the batches.
mikemod said:
Mine was the opposite, it wouldn't stop vibrating, even when switched off.
You had to take the battery out to get it to stop.
Click to expand...
Click to collapse
Had the same problem...now we're at least two with this prob. Still waiting for the replacement...

I don't know why but that's true !!!

My Topaz Touch Panel got "Freezed" for several times a day,
the situation is, it will sudddently freeze at one point,
when every touch on the panel, it comes jump up and down, goes left and right,
I though it is problem with old rom and radio version, so tried to install different kind of version to try to solve but.......... I'm so depress that the problem still here.
Yesterday, I finally found what's the trick to make it back to normal,
it is to open the back cover and push it back !!! Then the touch panel will become ok works.
It is very curious and I don't know why....but that cause me upset and lots of trouble, I'm gonna to throw away my Topaz if the problem still here
Hope someone could help me
You feel free to mail that Topaz to my PO Box if it's such a big problem for you... I'll take it off you hands
Sounds like a hardware issue, I'd contact HTC or your carrier to get it repaired

Sick 'n Tired

Hi, guess what, two weeks ago I got a new phone, the famous HTC HD2 (leo). I was so proud, I had read so many good reviews about this phone, and I just loved it. Played with the phone night and day, but then it started. The second weekend I had it. I sent four texts (yeah, I have no friends) I was thinking they arrived but (hence I don't have any friends) I thought they didn't answer. But on friday (05.03.2010), my brother called me, asking me about the text, I did not understand, but it seems like it waited 1 week to send a text message. Then my friend rang, about the same (but with the text i wrote to him of course), I did not know what to do! Also my brother called me like 1 week ago, i slided the most awesome button to the left, to answer the call, and guess what? The cell froze, guess what it did yesterday too? Yeah, it froze again.
Does every hd2 live its own life? Would it help to hard reset it? (even though I can't seem to find the "erase all" key)
I have other problems with the phone aswell, but can't seem to remember what they were.. hmm...
If some one does not understand what I'm trying to say: My cellphone freezes when answering a call, also won't send texts when I tell it to.
Can anyone help a friend out? I don't know where else to turn than a forum.
Is this the best phone or what!
What ROM do you have on the phone now?
Nothing that you have described seems unresolvable in the least bit. You are in the right place to make your HD2 live up to its reputation, and it certainly is not hard to do.
IF you can provide any details about your current ROM, etc. that would be a good place to start helping you.
Jnygaard said:
Hi, guess what, two weeks ago I got a new phone, the famous HTC HD2 (leo). I was so proud, I had read so many good reviews about this phone, and I just loved it. Played with the phone night and day, but then it started. The second weekend I had it. I sent four texts (yeah, I have no friends) I was thinking they arrived but (hence I don't have any friends) I thought they didn't answer. But on friday (05.03.2010), my brother called me, asking me about the text, I did not understand, but it seems like it waited 1 week to send a text message. Then my friend rang, about the same (but with the text i wrote to him of course), I did not know what to do! Also my brother called me like 1 week ago, i slided the most awesome button to the left, to answer the call, and guess what? The cell froze, guess what it did yesterday too? Yeah, it froze again.
Does every hd2 live its own life? Would it help to hard reset it? (even though I can't seem to find the "erase all" key)
I have other problems with the phone aswell, but can't seem to remember what they were.. hmm...
If some one does not understand what I'm trying to say: My cellphone freezes when answering a call, also won't send texts when I tell it to.
Can anyone help a friend out? I don't know where else to turn than a forum.
Is this the best phone or what!
Click to expand...
Click to collapse
upgrade to the latest 1.66 rom
Hm, first of all, how do I check what rom I have. Second how do I upgrade it?
1. Settings (on slide bar)>About Phone>Software information
2. Either from HTC direct or from your vendor
Thanks, "please contact your supplier first before upgrading." Aint got time for that.. Hope this will help
So you're not going to check? Are you in the UK?
Seriously, chances are you're on an old ROM and changing to a newer one will work wonders
yeah, i have the old one, anyway, yeah i had the old one... 1,48.. well its 23:59.. cant call them, + do you have any idea how expensive that is!? and yeah prolly just the copilot nav that gets screwed, and i want that to get away from my menu (start menu)
Jnygaard said:
yeah, i have the old one,anyway, yeah i had the old one... 1,48.. well its 23:59.. cant call them, + do you have any idea how expensive that is!? and yeah prolly just the copilot nav that gets screwed, and i want that to get away from my menu (start menu)
Click to expand...
Click to collapse
You don't need to waste a cent, or a second of time calling anyone. The won't help you. They'll tell you to reformat your phone, and the problems you described will return.
You came to the right place for help with these issues. Technical support is typically worthless, as usual. Just take some time to read the info provided here, and in just a short time, you'll be happy with your investment.

Need help with Proximity Sensor Problem

I open a new thread because those already opened are quite dead... the subject is the proximity sensor on the HTC HD2... as i described in oter places this is the behaviour:
Upon receiving calls ALL works as it should
Sometimes when making a call:
1. dial a number
2. press talk
3. take the phone to my ear
4. the screen turns off
5. it starts ringing
6. THE SCREEN GOES ON
7. take the phone from my ear and put it back
8. the screen goes off
9. it answers on the other side
10. THE SCREEN GOES ON
11. take the phone from my ear and put it back
12. the screen goes off and all works well from now on on this call
I have at least a number that EVERYTIME when called does not acts like this... the proximity sensor does its job very well
I have at least one numbet that almost always did the steps described from 1to 12... only 4-5 times it didn't
If i get a busy tone the screen turns on... it will turn of if i do step 7
I've put back original rom and i have the same behaviour. I tried with clean roms and noting installed... still the same...
One time on a clean rom... I called a number that always did that and the first two calls were ok, after that it started again...
Now I'm using Hyper ROM 8.0 and I see that after step 6 if i keep the phone to my ear th screen will turn itself off after a sec or so... i cannot say right now if always...
Considering that this does not happens to many of us and it is not something permanent I think it can have something to do with the network... I don't know exactly what but this is my guess; like in the moments the screen turns on maybe the networks sends out a "signal" like the call would be over... I know it sounds weird but I don't know what else to think...
I even attached a poll to see who gets this behaviour...
So, to all the CHEFS out there... please help.... because HTC is not willing to... they're answer was not helping at all...
This is weird... I use netDrg's 2.5g ROM and I have no issue with the proximity sensor. Sometimes, when receiving a call, if I rotate the phone from portrait to landscape and then immediately take it to my ear, the screen doesn't turn off, but as soon as the display is back to portrait mode, it turns off. This isn't annoying at all, since I rarely pick up the phone and hold it in landscape to talk !
Maybe you should try a different ROM ? If you understand French well, netDrg's ROM is quite good, although it seems to me that the battery drains faster than with the stock ROM...
french is fine.. actually i would learn any language just to have this fixed... i know about landscape and sensor not working... but it is not the case here
it happens so aleatory... i would think it is a hardware issue... BUT i have one number and with it, this NEVER happened
i had almost all the cleanex suite... touch-x, energy and others... i really can't remeber if this happend since the first day i bought it... i've put back the stock rom downloaded from htc and still the same...
ok... i've made like 15-20 calls to the same number and all worked as it should... than all of a sudden it started to do what i've described in first post... just like this... i'm starting to hate this phone...
it looks like i'm not the only one with this issue... how you guys got it solved?..
just a thought... what triggers the screen on on this phone... i know that some apps open the screen... maybe there is a registry tweak to keep the screen off if proximity detected... this should be done automaticly i know... the fact is that the proximity sensor works...
uhm, just to point it out, you should edit your post instead of posting 4 messages in a row in the same thread
Anyway, this is the exact same problem I noticed reported in another thread, and I didn't have it, I mostly receive and rarely call, yet the few times I called I don't seem to remember such problems, will try and remember to test with my other mobile when I get back home.
today i went back to default rom that came with my phone...
RUU_Leo_HTC_WWE_EastEurope_1.48.479.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
and still it does the same
i HSPL again and than put
RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
the same thing
if I call my home landline it works perfectly... if i call one of the numbers i was telling you about it acts like described in post #1
one other thing i discovered though... with the original roms there is a courtain over the buttons on the phone canvas... this not only blocks aditional buttons on the screen but also blocks the top taskbar... wich is a goos thing
anyway for a 4-500 euros phone this thing i'm having shouldn't happen...
still searching... i've seens something with Rilphone.dll... can this make a difference?
LE: Rilphone.dll broke thephone module... hard reset...
Same here ccezar
I only realised in the last couple of weeks that I've hung up on people a few times & sometimes I've tried making the same call on the spot like 5 times in a row & the line has been cut off before it evens rings, which brings me to say that different behaviours on different calling numbers is just a coincidence.
Sort of experimenting at the moment, I think that when I dial, & put the phone to my ear slowly it works. i can see the screen turn off, & the call goes smoothly. Although after I've hung up sometimes the comm manager or arkswitch is on my screen, which only mean that the taskbar is still active...
I almost thought that the screen may have been switching off but the touch function was still there at least for a few more seconds...
There are hundreds(thousands maybe) of us HD2 owners out there, so my feeling is that if there ain't many complaints, it may aswell be a faulty device.
Then again I wonder if that phone canvs slider would make a diference? Anyone know if there's cab for this?
What radio you using
The more I think about it the more I'm convinced that the 2.10.... radios is the culprit for me.
I just flashed my old 2.07.50.27_2 radio, will test for a day or so and see what happens.
If your on a 2.10.50.. radio urself or anyone with the same prob and radio, can I suggest you downgrade to a 2.07 or 2.08/ or 2.09 for euros?
i thought also that it is radio raleted... i tried other radios and still the same...
anyway i don't think it is hardware related... because i have at least one number that never ever got this behaviour... and neither when calling landlines... it is only on some numbers on mobile networks... and i have numbers that get this behaviour only from time to time...
so... how does the proximity sensor works?... when in a call (there is a reg key that appears upon making a call and says activecallcount=1) the proximity sensor activates... if something in the way it turns the screen off... if the call ends the proximity sensor is deactivated... this is where i dont have exact facts... like if i keep the phone to my ear if it will remain with the screen off or once the call ended the screen goes on... i'd go for the second one...
so... my belief is that is has to do with network parameters... you make the call and on steps 5 and 9 from first post i think the phone belives that the call is over... and i guess the network sends a signal that triggers that... i know it sounds like a fairytale...
now i will try to find a sim card from another mobile operator and see if it does the same... i already tried with another seem from my operator and there is no change... maybe if i try a different sim type (there are simple and 3G sims - i have a simple one)
i'll keep digging... anyway... at least one mobile number and all landlines numbers this NEVER HAPPENED...
well that just makes sense ccezar. I'll do the same over the weekend & see what happens.
with another providers sim card that is.
Hey when say you tried with nothing installed, was cookie's hometab on the rom? just a thought
i don't think so... because i also tried with a stock original rom...
LE: i just realized that my phone is network locked... how can i unlock it?
ccezar2004 said:
i don't think so... because i also tried with a stock original rom...
LE: i just realized that my phone is network locked... how can i unlock it?
Click to expand...
Click to collapse
I couldn't tell ya, I can suggest that if you're on a contract your paying for the phone anyway, so you should be able to ring the phone op & ask them for the codes. Where I am, the only time I couldn't have it unlocked is if it was pre paid & less than 12 months old.
after long debates that's the conclusion of HTC
The only option that is left now is to send the device to the Repair Centre so the engineers could examine it. Your device is still under the warranty. But after the diagnosis the engineers will determine whether the fault of the unit is due to misusage, accidental damage or a manufactured fault. Before proceeding with the repair you’ll be notified with the cost of the repair, if it is an out of warranty case. Kindly note that your phone has a global warranty, which means if you have any issues with the phone and would like to get it examined (repaired) it will be through one of our global repair centers Please follow the link below for information about those repair centers. http://www.htc.com/uk/CA_Hotline.aspx?region=GWS Bear in mind as well that if you have European warranty, you’ll be able to repair your phone in any official repair centre in the European Union. Thank you for using HTC products. Please contact us again if you have any questions. Best Regards, HTC Team
Click to expand...
Click to collapse
bummer

Categories

Resources