Hello..I know that you said only to post new threads if it is a real problem, and this is!!!
I have my Touch HD for about 8-9 months and i would like to upgrade its ROM to WM 6.5...i've read everything, the wiki, many threads etc, and i have chosen quite a few cooked roms that i liked(about 10), but when i try to flash them i get the same msg: Error [262]: Update error - the ROM update utility has encountered communication problems during the process..
What am i doing wrong?? i dont know what else to do, im hopeless...am i missing any steps?? anything that i have to install before?? im a bit confused to tell the truth...
i would be very gratefull to anyone who can tell me 2-3 steps to do this one and for all..
Thank you very much
P.S: ROM version: 1.56.405.1(43972)WWE
ROM date: 03/06/09
Radio version: 1.13.25.24
Have you read this post ? its step by step guide
http://forum.xda-developers.com/showthread.php?t=505377
If your having trouble flashing, post your query in link provided in above post
Thread closed
Related
Hi all,
First time poster, but Ive been lurking for a few months, and joined up a few weeks back when researching a new phone.
Please indulge me. I have done some research, but want to make sure I am correct in my assumptions.
I received my Touch HD today to replace my lost Omnia.
It has an old stock ROM (1.18.723.3 (23358) WWE - dated 11/24/08). SPL is 1.14.0000
I want to update to the latest stock ROM that I downloaded from HTC (_HTC Touch HD_MR_2009_RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship.exe) using the serial code in the wiki because it wouldnt accept my actual serial number.
I tried to update it expecting an error and got an invalid Vendor ID.
Here is where the assumptions start. Do i need to update the USB drivers by looking at this thread Then use USPL following this thread. Then try running the RUU again?
Thanks in advance
Chris
fivecheebs said:
Hi all,
First time poster, but Ive been lurking for a few months, and joined up a few weeks back when researching a new phone.
Please indulge me. I have done some research, but want to make sure I am correct in my assumptions.
I received my Touch HD today to replace my lost Omnia.
It has an old stock ROM (1.18.723.3 (23358) WWE - dated 11/24/08). SPL is 1.14.0000
I want to update to the latest stock ROM that I downloaded from HTC (_HTC Touch HD_MR_2009_RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship.exe) using the serial code in the wiki because it wouldnt accept my actual serial number.
I tried to update it expecting an error and got an invalid Vendor ID.
Here is where the assumptions start. Do i need to update the USB drivers by looking at this thread Then use USPL following this thread. Then try running the RUU again?
Thanks in advance
Chris
Click to expand...
Click to collapse
No need to open new thread. Threads already exist on flashing new roms like this one. All help you require can be found in that thread. Any further queries can be posted in that thread.
Please try and abide by forum rules and post in relevent threads instead of creating new ones
Ta
Rick
Thread closed
Hi...
I have a htc touch hd like follow
ROOM ..............1.14.405.0 (21010) WWE
Radio................1.09.25.14
Protocol.............52.49a.25.26U
I would like to update my room by 1.59 or so.
I download and try with severals rooms but when I started the program a error comes up saying Error Vendor ID. I was reading about that but I need a program for unlocked.
The problem is Im just wanna update my room but I cant by that error. And I dont like do anything wrong. Always I read in this forum that You should be probe everthing that was tasted before.
So please anyone Help me and guide me.
I will appreciate it
it's called read/research before flashing ROMs. i think your post is the 7th or 8th i've seen in the last 24 hours asking for help because the OP flashed first only to discover the flash didn't go well, lol. go to the Blackstone ROM forum and read and follow the HD Dummies Flashing Guide and you should be good to go. good luck!
Question about flashing the HTC Blackstone
Hello Everyone
I have a htc touch hd like follow
ROOM ..............1.14.405.0 (21010) WWE
Radio................1.09.25.14
Protocol.............52.49a.25.26U
I bought my phone unlocked. My question is when I going to flashing my mobile I will lose the unlocked. For example Im just need put into the phone the sim card for the country to syncronize and works awesome. Something could happening with that stuff?
Thank you
No, you should not lose your "unlocked" state. You WILL lose all the data on phone.
But that is also stated on many other posts...
Flashing HTC Blackstone by First time
Guys!
Sorry by all my inquiries but this it will my first time for flashing my phone!
Could you send to me the post where explain about the losing data?
Another thing is I dont have idea which way takes the HSPL or USPL
I dont know which one will be the best way!
I will appreciated all the help, or if you have a post for read. I will appreciat it
Thanks Guys!
juanguijaragris said:
Guys!
Sorry by all my inquiries but this it will my first time for flashing my phone!
Could you send to me the post where explain about the losing data?
Another thing is I dont have idea which way takes the HSPL or USPL
I dont know which one will be the best way!
I will appreciated all the help, or if you have a post for read. I will appreciat it
Thanks Guys!
Click to expand...
Click to collapse
Read this guide and the wiki. Both should answer all your questions!!
Flashing a phone is similar to hard resetting it. All data will be lost on phone, but you will have a new OS, i.e. a new rom
Thread closed
can anyone tell me please what andriod build version i need to use with my hd2
my software:
manila version :2.5.20121490
rom version: 1.72.172.0 NLD
radio version 2.07.51.22_2
can any please tell me what to use
or tell me whati do worng because when i try a build it wil load but it stops afer 10 seconds and the white text fades away
please help me i'm just a noob and noobs need help to
wouter639 said:
can anyone tell me please what andriod build version i need to use with my hd2
my software:
manila version :2.5.20121490
rom version: 1.72.172.0 NLD
radio version 2.07.51.22_2
can any please tell me what to use
or tell me whati do worng because when i try a build it wil load but it stops afer 10 seconds and the white text fades away
please help me i'm just a noob and noobs need help to
Click to expand...
Click to collapse
Hi.
Have you read any of the stickies, readmes and FAQs posted in the Android Development section? Most questions are answered there. Someone also posted the same question about two posts up
http://forum.xda-developers.com/showthread.php?t=830597
Anyway, if you have read all of the above and still get stuck then a more specific question make get the attention of those with more specific answers.
But to answer part of your question, my HD2 is running:
ChuckyRom (I forget which one, but it was designed for android) (WinMo ROM)
Darkstone's Sense Build 3.2 with Hasterins kernel V.8 (Android)
I have very few problems now. Good luck, Android on the HD2 is worth the trouble of getting it to work IMHO
kinsago said:
Hi.
Have you read any of the stickies, readmes and FAQs posted in the Android Development section? Most questions are answered there. Someone also posted the same question about two posts up
http://forum.xda-developers.com/showthread.php?t=830597
Anyway, if you have read all of the above and still get stuck then a more specific question make get the attention of those with more specific answers.
But to answer part of your question, my HD2 is running:
ChuckyRom (I forget which one, but it was designed for android) (WinMo ROM)
Darkstone's Sense Build 3.2 with Hasterins kernel V.8 (Android)
I have very few problems now. Good luck, Android on the HD2 is worth the trouble of getting it to work IMHO
Click to expand...
Click to collapse
That's ChuckyDroidROM and I use it too. Best so far.
http://forum.xda-developers.com/showthread.php?t=734238
Hey guys, im not really big on technology , but for the last 5 hours i have been trying to get android on my HTC HD2. I have ROM 3.14 and Radio version 2.15. but my SPL is 2.10. If correct i believe I need SPL 3.03? I have no idea as to how to do that. Im new on this site so please forgive me if this post has already been done. Much help would be appreciated.
Do you want NAND or SD Android?
Im sorry , but i dont know the difference . I think i have been trying to get the SD android.
In that case, you have everything you need. Forget about HSPL. That's only needed if you need to change radio, and you don't.
Just follow the instructions on how to install the Android build that you have downloaded and you'll be up and running.
Android on SD is pretty straight forward - it's just copy, paste and run - so you shouldn't have any problems.
Thank you very much sir. I really appreciate the help.
Jerseykid101 said:
Thank you very much sir. I really appreciate the help.
Click to expand...
Click to collapse
No problem mate. Glad to help
Jerseykid101 said:
Hey guys, im not really big on technology , but for the last 5 hours i have been trying to get android on my HTC HD2. I have ROM 3.14 and Radio version 2.15. but my SPL is 2.10. If correct i believe I need SPL 3.03? I have no idea as to how to do that. Im new on this site so please forgive me if this post has already been done. Much help would be appreciated.
Click to expand...
Click to collapse
If you like you can follow the link in my signature which gives you step by step instructions
enjoy
use youtube also
the video on youtube....KVoCi0qkrBg will actually show you how to do everything!!! with links to this site and where to get what from this site and how to install/setup... i was really confused before watching this video and it helped alot... also in the description of this video you will get all the steps and links...
also...
since i dont think i am able to put outside links in my post i put the description of the video like that for you... but if you couldn't find it try this, the full name of the video is " How to install HSPL ,RADIO,ROM,ANDROID on HTC HD2 " by (mlkjuggalo).
good luck
MDJ's CyanogenMod 7 v. 2.6 [A2SD+][GRH78C][RMNET][Kernel: MDJ S10.4 OC
hi please some one help me i am trying to install MDJ's cyanogenmod 7 on my htc hd2 T(mous) when i tried to update Magldr rom but it is not going through it just got struch on updating window it did not even update 1% i think the reason behind it might be my rom being much updated version when compared to what i saw magldr my software details OS version 5.2.21913(21913.5.0.94) ROM 3.14.531.1 (04666) wwe RADIO V- 2.15.50.14, when i tried to update MAGLDR window showed me rom image 2.000000 sometlike thing like this plz suggest me some thing and give the detailed step by step i am new to android buils i am running froyo v1.8 sd version for almost months but its draining my battery in 5 to 6 hrs plz help me out with this i wanna get cyanogenmod 7 badly. thx
i appreciate ur builds and services.
I have HTC P3300 and it came with WM6 with the following config.
ROM : 3.7.701.1 WWE
ROM date : 6/21/07
Radio : 02.69.90
Protocol : 4.1.13.30
ext Rom : 3.6.707.101
Now i want to upgrade it to WM6.1
I SEARCHED THRU MANY POSTS. i got so many answers to my questions but i have some fundamental questions and if anybody can answer that i will be really obliged.
1) I have vodafone India. Can i flash a ROM which is for another carrier. For eg. when I searched the thread "Artemis_Upgrades" I could not find any HTC WWE factory ROM which matched the above specs. BUT when i saw the factory ROM of DOPOD WM6. It matched the above specs perfectly.
so the basic question is if anything goes wrong in my upgrade then can I flash the DOPOD rom on my HTC
2) I have searched the forums but i could not find a valid factory WM6.1 ROM. If anybody can provide a link then it would be a great help to me. Please also specify which ROM (dopod or any other) is compatible to my HTC.
3) Once i get both the above factory ROMs (WM6 and WM6.1) i will be flashing my HTC and the steps that i would follow is as mentioned in this post
http://forum.xda-developers.com/showthread.php?t=401814
1) soft -reset using the USPL
2) flashing the ROM.
Please let me know if I need to do anything other than this!
Thank you in advance.
I suggest reading through this thread: http://forum.xda-developers.com/showthread.php?t=870041
You can always ask your question there, since the OP is a great troubleshooter/maker. (j/k RN)
yes bro i has flashed on my artemis p3300. it work superb no problem, it fast and gps work great.
but firstly flash with uspl , the rom i has flashed id -
p800w-sea-eng-wm6-upgrade-20070713
just type this in google u willget link u can flash this and use it
why so serious?... lets put a smile on that face
NeoS2007 said:
since the OP is a great troubleshooter/maker. (j/k RN)
Click to expand...
Click to collapse
pmsl neo, loving the xda spirit hahaa
bhaskaramp
follow the link that neo gave you and flash your p3300 with uspl1.11.cmon.
you cant go wrong if you follow the steps on my thread in post 1.
(post 1... here...)
if it does not work, or if you have any questions, just message me, im always here to help.
*do not try anything untill you have sucessfully done uspl1.11.cmon.
Sooo.. the point im trying to make is: you wont even need the original/official rom once you have got uspl1.11.cmon installed.
eg, if you flash a rom and it goes wrong, uspl1.11.cmon will let you flash ANY rom, so the original/official rom is not even needed!
Rn
i know i said it before but ill say it again: im always here to help
And that's that.