Database Users

Bricked m600

ok i think iv killed my m600
i flashed it with the older imate rom the 1.0.9 version
it installed 100% and rebooted and from ther it was stuck on the imate screen for like 10 minutes and i see the following text in red on the top left corner
---------------------
IPL 2.10.0001
SPL 2.15.0001
GSM 01.14.20
OS 1.0.9.25
-------------------------
i tried removing the battery and restarting the fone. still the same thing. can someone please please please help me with this?
what do i do?
im sure orange wont help me out since i flashed it with a non-orange rom.

never mind fixed itby goin into the bootloader

funky_Saggi said:
never mind fixed itby goin into the bootloader
Click to expand...
Click to collapse
hi there i seem to have the same problem as you with the boot screen. top left corner say's
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 1.0.13.21
can you please tell me how you fixed yours please it would be a great help

What you could do is flash it with an newer rom
Hold camera button AND reset (be asure that it hold it while resetting)
Then... you are in you bootloader... connect the PDA with your PC..it will recognized it!
Then run the romupdate ;-)

Hi thanks for trying to help me i got my phone in to the 3 colour screen but my computer does not pic it up at all. is there another way to save my M600

crossy4life said:
Hi thanks for trying to help me i got my phone in to the 3 colour screen but my computer does not pic it up at all. is there another way to save my M600
Click to expand...
Click to collapse
Aren't you getting "USB" written in the bottom left corner of the 3 colour screen when you connect it to USB?

Yes i get the USB come up at the bottom of the screen my computer does not do anything. can you tell me which ROM i will need as the ones i have to run the ROM update but it comes back saying connect to ActiveSync which i can not do is there a way round this?

Final got my SPV M600 Working with the ROM from the download area thanks for the help anyway
cheers

just change the usb port to another one and start rom it should pick it up

IQ700

Need help!
I have been messing with this phone for afew days now can't seem to get it to work. When I power the phone on all I see on the screen is green screen that says "IU BUILD! Test Only" this ws the result of a hard reset. The device is sim unlocked but I don't believe it's super cid unlocked. I'm unable to do anything except for hard resets and bootloader screen. I was going to try to reflash the original rom but can't seem to find any, I only have access to the sp3 roms which I can't use since it's not super cid unlocked. Any help would be great!!!

iMate OEM ROM
http://rapidshare.com/files/61129896/SP3_WWE_2.4.33.11.zip
Here is a link to an iMate OEM ROM. Start in bootloader and execute this to see if you can recover your device. You haven't shared much about what you phone is or how it ended up like it is. You are correct that it needs an OEM ROM, then application unlocked then Super CID unlocker before flashing a custom ROM. Good Luck and report back you results.

The phone is a Krome IQ700. In bootloader mode it shows IPL 0.27 SPL 1.01.0109 Typhoon UI. Another problem is active sync does NOT see the phone. When attempting to load any rom I get error 264. I think I might have to load rom with SD the only proble is I've never had to do this before so any help would be great. I could honestly live w/o the phone but I think this would be a great learning expirence. Thanks in advance.

after attempting your reply my phone is now dead and will not power on ...

nwdrifter said:
after attempting your reply my phone is now dead and will not power on ...
Click to expand...
Click to collapse
Remove the battery and memory card, wait 30 minutes then re-insert the battery. Hold in the camera button and then plug in the USB. If it is still alive, it will open in bootloader (Red, Green, Blue) mode.

still dead... what do you think happened?

nwdrifter said:
still dead... what do you think happened?
Click to expand...
Click to collapse
I had this once when my oem battery died. I was able to jumpstart it and get it to recharge using a 9v battery to kick it up from nearly 0V.
If you have a battery meter, you can test the contacts, looking for 4v across the battery terminals (remove battery from phon to test). If you get < 2v then you battery does not have enouge juice to power up.
Once you get power back, do you have the ROM from your OEM? You should be searching for it in the mean time. If I find anything on it, I will let you know as well.

Everything I see on your phone specs appears that it should respond and behave like all of the other Typhoons/Sp3's. As long as you followed the unlocking steps from Karhoe's post (second sticky on typhoon main page), your device should not be a brick. If you recover power, you may want to first flash an WM5 ROM from one of the posts then try to flash WM6 as this is the prescribed method starting from WM2003.

my email to faria

below is an email i sent to faria seeking his help, i also decided to post it on the forum, in cae anyone else has some ideas, and in the event the problem gets solved the information is here for someone else who needs it
"I have a problem that i would really appreciate your advice on.
So i bought a cingular/att 8125 - G3 Wizard - on ebay for $40 the listing described it as having a broken lcd screen, so i bought an lcd as well replaced it and that element of it works fine. I turn it on to see that the dumbass somehow installed a rom with the IPL of 1.01 and the SPL of 3.08.
so im assuming that is the conflict keeping it from booting up properly, i can easily access the boot loader and flash almost any rom available.
my main issue is this, from what i gather, i need to bring the IPL up to at least 2 for it to be compatable, but any rom i try to flash that acctully replaces the ipl gives me , i belive an error 300 and says the updater tool is to old, so do you know any way i can update the IPL so it works.
thank you,
Adam"

Is it CID locked? I saw that message a lot when I had mismatched SPL/IPL and the CID was locked. Try running an older version of lokiwiz, it can unlock that combination (lokiwiz2b couldn't do it, but something from around October last year could).
Then try button ROM or an OEM ROM.
$40 is not bad at all, even with a broken LCD.

thanks you for the response i actully saw that post my self, but becuase of the fact that it doesnt boot beyond the splash screen i cant run active sync to use lokwiz , unless there is a way to run it without active sync and at the bootloader.
thanks though

u could always try a hard reset commanager and voice commander and then press on button and then press send once message comes up

Dropped 8525. Need Help Restarting

My son dropped his 8525. It is now stuck on a display of red, green, blue, and white bars. A reset and a battery removal do nothing to get it to boot. Is it toast or is there something I can do to get it to boot?

considering this is your 1st post I'm assuming that you didnt have olipro 2.10 as your SPL.....What is your IPL and SPL as this may get you the help you are looking for... And if you do get it going again PLEASE install Hard SPL, Here : http://forum.xda-developers.com/showthread.php?t=296722
Good luck.
P.S. try reading through this, it may help... : http://forum.xda-developers.com/showthread.php?t=369434

The IPL:
IPL-1.04
The SPL:
SPL-2.03
I hope this helps someone.

Someone said they had success with this problem in this thread http://forum.xda-developers.com/showthread.php?t=355884
Read a bit and see if it works but please understand that this really just trying out everything in a last ditch effort to get it working. There may be no hope, so no promises...
If you do manage to get it going again I'd suggest Hard SPLing your phone so it is easier to fix. Hard SPL isn't a guarantee, mind, but it does provide a safety net for when things like this happen...
All the best...

hermes 100 8525 flash problem
hi, i was trying to upgrade a cingular 8525 in the process of unlock,
and it stopped at 1%, and did nothing,
now the phone just go to the 3 color screen,
and says
herm100
ipl-1.00
hem100
spl-1.40.olipro,
what can i do to restore it to normal please,

lacasapc, try to Hard Reset, hold down both soft keys and reset with stylus. If that doesn't work then try this : Flash it to you device while it in tricolour screen. Make sure that your activesync disable & use the latest RUUwrapper.
Open Activesync, select connection settings and untick "Allow USB Connections".
Run the RUUwrapper.exe file for the os you want after connecting the hermes via usb. Chose SPL 1.40 then HARD SPL and then flash the new OS. This should work.
Cheers...

Help please!

I was trying to update my Athena to wm6. I got errors 270 so i tried to update the spl as i read on the forum. I stupiditly updated the x7510 spl so i think i really screw it up.
Results:
When I try to open it it shows nothing. The joysticks light is just on.
I can enter bootloader. It says:
ATHE400
IPL-v1.00
ATHE400
SPL-3.65.0 Ol iNex
I cant do anythink at this point. Any flash i use it gives me an invalid device id. I also tried the Athena Unlocker but it gives me the same error.
Is there any way to make it live again? Please help me I am desperate.

I did the same thing. And I am also desperate Happy not to feel alone :O But i think no reply for this one... Olinexx help us please...

to: palamosteliaro
this thread started by ggursel seems to have solved that problem. hope that helps
http://forum.xda-developers.com/showthread.php?t=502682