Related
Hey all. I was wondering how to format/create my sdcard with 2 partitions one fat32 the other ext2 on a mac. I used the search engine but cannot find anything.
I'm not a terminal noob but I can't figure out how to format/create the 2 partitions. I need help because I want to move my data from the g1 to the sdcard.
Thanks!
Install this http://sourceforge.net/projects/ext2fsx/ and then reboot and use the Disk Utility in /Applications/Utilities/
this will not format a ext2 partition, it only allows you to mount it, your best bet is to d/l GPARTED or of you have windows in parallels use Paragon Partition Manager... this will not work if your windows is in a bootcamp partition, the other option is to use a pc (sadly hu?)
If it helps, I actually used an ubuntu live cd and installed gparted while booted to the cd... of course, i had already made the sdcard fat32 in windows but gparted allowed me to resize and format the remainder in ext2.
I've used the ext2fsx tool to partition my SD card on my mac. I don't think I had any extra software installed, and I just used the Disk Utility...
I'm also having trouble creating a valid partition. I'm using gparted on an ubuntu live cd but the sdcard doesnt like being messed with.
What disklabel are you using? [Loop / msdos / bsd etc]?
I think i've tried every combination and haven't gotten anywhere.
Also, i've read that the card class makes a difference, is this right or does it only effect the speed of data transfer?
Any help would be much appreciated!!
.//Yamthief
after tryin to partition my sd, it went throught the steps then at the end it said restart needed, and after it restarted it started up in this safe mode type screen before vista loaded and said some error....did it partition the card? because when i look at properties of card it only says i have free space that is size of fat32....that i left...cant see if it made ext2
caleoss said:
after tryin to partition my sd, it went throught the steps then at the end it said restart needed, and after it restarted it started up in this safe mode type screen before vista loaded and said some error....did it partition the card? because when i look at properties of card it only says i have free space that is size of fat32....that i left...cant see if it made ext2
Click to expand...
Click to collapse
Windows cannot see ext2 partition. your best but is to open partition manager or use a linux distro to see it.
i wish Paragon didn't exist, i have seen so many problems people have been having trying to use Paragon. if everyone just downloaded a linux distro it would work perfectly every time and we wouldn't have 15 threads about Paragon problems
tubaking182 said:
i wish Paragon didn't exist, i have seen so many problems people have been having trying to use Paragon. if everyone just downloaded a linux distro it would work perfectly every time and we wouldn't have 15 threads about Paragon problems
Click to expand...
Click to collapse
i cant use that on windows vista can i?
download a linux distro and burn to a disk, then shut down your comp and reboot to the disk. then when you boot to linux click System>Administation>Partition editor. it's easier then trying to use paragon
tubaking182 said:
download a linux distro and burn to a disk, then shut down your comp and reboot to the disk. then when you boot to linux click System>Administation>Partition editor. it's easier then trying to use paragon
Click to expand...
Click to collapse
i have no idea how to use that, where do i get it from, i have eclipse on my comp but dont think that has anything to do with this
nope go here i have a step by step. i will be adding screenshots, but i didn't have a chance today as i was trying to meet up with some guy to buy my phone(tilt)
Your best bet is to start clean. Delete all the partitions so your entire sd card is "unallocated space".
Create a new partition for Fat32. Don't use all free space (Duh)
Create another partition for ext3 (use ext2 if your rom doesn't support ext3 yet). Just use all the remaining space
Windows cannot see the ext partition but if you want to see the amount of space used just open up paragon partition manager and it will tell you.
I dont know if you fixed the problem yet, but I think I have a solution for you.
If you're trying to do this using the phone to mount the sd card, it won't work when it boots up to that safe mode looking window, because the g1 won't stay mounted. You need to use a card reader, there's no other way around it that I've been able to find.
Also if you're using 64bit edition of windows vista, paragon has tons of problems. If that's the case, you need to create the recovery cd within paragon, then boot to it, and you'll be able to make all the changes there, using a card reader of course.
To check if it made the partition, just have the sd card connected to the computer (g1 will work for this) then open up paragon and open the partition manager, and where you're sd card is there would be another partition, right next to your fat32 partition. If its ext2 format it would be highlighted yellow.
PPM9 works just fine, you just have to keep remounting the SDCard when Windows reboots. I've had it dismount during the boot too, you just have to watch your phone screen and remount it if it unmounts.
after read through some of the rom requirement
i'm having problem with the partition
some says "ext 2" & "linux swap" are required
how do i make partition?
http://forum.xda-developers.com/showthread.php?t=534714&highlight=wipe+partition
there you go. The search function works really well too if you try.
On a Windows platform just use the Partiton Manager or Acronis Disk Director Suite. And if on a Linux,you can use "fdisk"&"mke2fs" command to partition and format.That's so easy
I have tried all kinds of ways to partition my sd card to get data2ext to work on b 0.5.
- Partitioning through rom manager
- Partitioning through paragon partition manager (didn't even work)
- Manually partitioning by running commands through terminal emulator
I manage to get the linux swap and fat32 partition but no matter which method i tried, i just can't get the ext2 partition. On the emulator, it asked if my file system was an ext2 system.
By the way, i am using an 8gb sd card that came with Nokia 5800. Is this the cause of not being able to create the ext2 partition?
Easiest way I can think of is to use the live distro of Gparted.
http://gparted.sourceforge.net/livecd.php
Awesome partitioning tool and has a gui anyone can follow.
E.E.
i just partioned my 8gb yesterday with paragon, no problems. what kind of problem did you have?
@eepunk I will try that later... i'll see if there is any solution in the current software(s) i have...
@haha123 the problem i'm facing is i cannot see the sd card when i click format partition... Maybe i'm doing it wrong. Here is how i do..
1. Plug my phone into USB and click Disk Drive
2. Open up Paragon Partition Manager 11 Personal
3. Click on Partition Manager on the left tabs and launch the partition manager
4. At the bottom, click on Basic Hard Disk (HTC Android Phone USB Device)
5. Click on Format Partition in the Disk View tab.
The problem is when i click format partition. It just shows the hard disk in my PC but not the HTC Android phone USB Device.
I even tried skipping the format partition to try creating a partition but i still cannot see the HTC Android Phone USB Device.
The Error i get is "The disk already contains four primary partitions. Basic hard disks can contain only four primary partitions, including extended one.
Eh...
Why not just boot into Clockwork and use the Partition menu
spicyjoe said:
@haha123 the problem i'm facing is i cannot see the sd card when i click format partition... Maybe i'm doing it wrong. Here is how i do..
1. Plug my phone into USB and click Disk Drive
2. Open up Paragon Partition Manager 11 Personal
3. Click on Partition Manager on the left tabs and launch the partition manager
4. At the bottom, click on Basic Hard Disk (HTC Android Phone USB Device)
5. Click on Format Partition in the Disk View tab.
The problem is when i click format partition. It just shows the hard disk in my PC but not the HTC Android phone USB Device.
I even tried skipping the format partition to try creating a partition but i still cannot see the HTC Android Phone USB Device.
The Error i get is "The disk already contains four primary partitions. Basic hard disks can contain only four primary partitions, including extended one.
Click to expand...
Click to collapse
I followed this step by step guide:
http://forum.xda-developers.com/showthread.php?t=512873
I had the card formatted to fat32 (using windows) before partitioning, maybe you can try that?
pjgodd said:
Eh...
Why not just boot into Clockwork and use the Partition menu
Click to expand...
Click to collapse
Hmmm, i was looking around in that menu but there isn't any saying create partition... just format and stuff... :S
@haha123 Hmmm, give that a try.... i've just downloaded the gparted software so will try that first...
EDIT: Given up all hope, i can't even get gparted to boot with USB...
Check the GUIDE...
Thanks blayo, i tried that and it crashed all the apps on my phone until i had to format my sd card and restore nandroid... hmmm... mysterious, but thanks, i'll let data2ext pass.... wouldn't want to brick my phone...
spicyjoe said:
Thanks blayo, i tried that and it crashed all the apps on my phone until i had to format my sd card and restore nandroid... hmmm... mysterious, but thanks, i'll let data2ext pass.... wouldn't want to brick my phone...
Click to expand...
Click to collapse
Well, this is the formatting guide... what the hell did you expect? There are certain files on SD fat32 partition that some of apps use. If you unmount SD card and reformat it, those files are not available any more. Right?
Yeah true but even when i restore it doesn't work. Alright man, thanks for the guide anyways.
!! Important: Make a backup of your Nook device first !!
Resize partitions
1. Download Gparted LiveCD
2. Extract onto FAT / FAT32 USB memory stick or burn to CD-ROM
3. If on a USB memory stick, run \utils\win32\makeboot.bat from the memory stick.
Do NOT run makeboot from a hard disk!
4. Boot computer from USB device into Gparted
5. Connect your Nook running Noogie of a Micro USB card (this will make the partitions visible to Gparted).
6. Resize the last partition (nr 8) labelled "data" (= Barnes & Nobles content)
Make sure to move the partition to the far right.
7. Move the next-to-last partition (nr 7) labelled "cache" without resizing it.
8. Extend the next-to-next-to-last partition (nr 6) labelled "nook" (Side loaded content) to fill the gap.
9. Remove USB cord, Micro USB card and boot your Nook.
10. In Settings you can inspect the amount of storage space.
I received errors when the partitions were about to be moved on the disk.
I changed the partitioning resize to field where it says "Align to:" from "MiB" to "Cylinder". After a 2nd attempt and doing each partition individually all worked out well.
For those only with Windows, download Gparted LiveCD iso image and use virtualbox to boot from it. It still worked well.
Edit: I successfully repartitioned two of my Nook Simple Touch using the method above + virtualbox + Gparted LiveCD iso.
Surprisingly, the size of partitions in my two NST were slightly different, suggesting that the physical size and location of partitions don't matter as long as their order and type in the partition table are as expected and the size is big enough to hold files there. I resized and moved the last three partitions as I wanted several times and made sure they work well.
Factory reset, upgrade to 1.2.1 (this seems to require the cache partition to be big enough to hold the firmware update file: something like 128MB worked for me), rooting all worked well with resized partitions. I ended up shrinking the cache partition down to 32MB and the data partition to 128MB, reserving 1.11GB for the side-loaded contents. I'm sure the system partition can also be shrunken, but I didn't go that far.
Why a live cd? Does installing gparted to whatever linux flavor you're using not work?
I don't use linux on my PC... only on hacked router & nas.
Goggles2114 said:
Why a live cd? Does installing gparted to whatever linux flavor you're using not work?
Click to expand...
Click to collapse
So dump Noogie on a microsd card run noogie and while noogie's running plug nook into pc? Do you just plutg it in and it does everything auto, or does something in noogie need to be run? Does this work on a nook touch glow?
Sorry to sound so dense but rooted using NookManager.
Edit more to the point it's throwing up an error when trying to move sdb8 around. It shrank fine just won't move. Not sure why. Not getting any useful error messages. Just 'can't have overlapping partitions.'
Odd. I was able to move it twice and get it to behave. Yet do the same n one move and Nothing. Apologies for the rinning Log just. Meh. The rest of the partitions resized in one step. sdb8 was the one that needed two steps.
Aaaand Success. Showing up as having 913MB free as opposed to like 212 or whatever.
Edit: now I'm getting a constant 'low space' warning from nook (understandable.) And installing apps is hit/miss on if they'll actually install. Keeps claiming space issues.
Query. Do apps install to the BnN partition or where?
Good to hear another success story. In my case I squeezed all the way to 1.45GB for the side-loaded contents. boot/rom/system/cache/data partitions are shrunken, and factory partition is busted. I had to use fdisk instead of GPartED to completely recreate the partition table, though.
I think, apps are installed to the data partition (the 8th one) under /data/app. Before being installed it's downloaded to cache partition (the 7th one). In my case I gave 16M for cache and 128M for data. If you are low on the data partition and have some space left on the system partition, you can move apps from /data/app to /system/app.
Goggles2114 said:
So dump Noogie on a microsd card run noogie and while noogie's running plug nook into pc? Do you just plutg it in and it does everything auto, or does something in noogie need to be run? Does this work on a nook touch glow?
Sorry to sound so dense but rooted using NookManager.
Edit more to the point it's throwing up an error when trying to move sdb8 around. It shrank fine just won't move. Not sure why. Not getting any useful error messages. Just 'can't have overlapping partitions.'
Odd. I was able to move it twice and get it to behave. Yet do the same n one move and Nothing. Apologies for the rinning Log just. Meh. The rest of the partitions resized in one step. sdb8 was the one that needed two steps.
Aaaand Success. Showing up as having 913MB free as opposed to like 212 or whatever.
Edit: now I'm getting a constant 'low space' warning from nook (understandable.) And installing apps is hit/miss on if they'll actually install. Keeps claiming space issues.
Query. Do apps install to the BnN partition or where?
Click to expand...
Click to collapse
What's the point of doing all this?
You gave a list of instructions, but not the goal they achieve.
L_R_N said:
What's the point of doing all this?
You gave a list of instructions, but not the goal they achieve.
Click to expand...
Click to collapse
Which post are you referring to?
Troute said:
Which post are you referring to?
Click to expand...
Click to collapse
.c0.'s original post.
His instructions describe how to use gparted to resize the partitions on the NST to make full use of the memory available after you have rooted it. I've used gparted before so maybe they were clearer to me than to others but the thread title was the main clue.
Troute said:
His instructions describe how to use gparted to resize the partitions on the NST to make full use of the memory available after you have rooted it. I've used gparted before so maybe they were clearer to me than to others but the thread title was the main clue.
Click to expand...
Click to collapse
I kind of thought that Nook's internal 2GB flash is already sanely formatted (i.e. most space is dedicated to the partition that is mounted at /media). If that is not the case, then that should be noted in the first post. It would also be cool if it said exactly how much space each partition has (I think i saw these partitions back when i've used Noogie to make initial backup of my device, but i don't remember the details), and how much space you would gain, and on which partition (and where it is mounted).
L_R_N said:
I kind of thought that Nook's internal 2GB flash is already sanely formatted (i.e. most space is dedicated to the partition that is mounted at /media). If that is not the case, then that should be noted in the first post. It would also be cool if it said exactly how much space each partition has (I think i saw these partitions back when i've used Noogie to make initial backup of my device, but i don't remember the details), and how much space you would gain, and on which partition (and where it is mounted).
Click to expand...
Click to collapse
Thanks! i did the work 880MB for side loaded content now!!!
on one of my NST i had an issue resizing the FAT32 partition and i had to format it to make it work.
Other than that all went ok!
Thanks
How to maximize RAM available for apps
I found this easy to read table here.
I doubt that I will ever download books from B&N. I want to minimize the space for that. I infer that I should minimize partition 8 that gets mounted to \data. Is there a practical / actual minimum for this?
I see that anything I copy in from my PC over USB is going into media. 100MB should be more than I need. I could put in an SD card for this sort of thing if it grows.
My question is, which partition do I want to increase to make the maximum available to apps downloaded from the google marketplace?
If an application requires a minimum of 512 MB of RAM, which partition(s) do I need to set >= 512?
New additional question: Upon some further research, I see that you can use sd cards for swapfiles to increase system RAM up to a maximum of 4GB. Does anyone know if it is possible to use this built-in storage for the same purpose?
.c0. said:
!! Important: Make a backup of your Nook device first !!
Resize partitions
1. Download Gparted LiveCD
2. Extract onto FAT / FAT32 USB memory stick or burn to CD-ROM
3. If on a USB memory stick, run \utils\win32\makeboot.bat from the memory stick.
Do NOT run makeboot from a hard disk!
4. Boot computer from USB device into Gparted
5. Connect your Nook running Noogie of a Micro USB card (this will make the partitions visible to Gparted).
6. Resize the last partition (nr 8) labelled "data" (= Barnes & Nobles content)
Make sure to move the partition to the far right.
7. Move the next-to-last partition (nr 7) labelled "cache" without resizing it.
8. Extend the next-to-next-to-last partition (nr 6) labelled "nook" (Side loaded content) to fill the gap.
9. Remove USB cord, Micro USB card and boot your Nook.
10. In Settings you can inspect the amount of storage space.
I received errors when the partitions were about to be moved on the disk.
I changed the partitioning resize to field where it says "Align to:" from "MiB" to "Cylinder". After a 2nd attempt and doing each partition individually all worked out well.
Click to expand...
Click to collapse
I have a little (maybe big?) problem. Can't partition with Gparted Live, as gparted scans my /dev/sdb (nook) infinitely. If I plug out my nook, other partitions (in my case: /dev/sda) become visible and ready. Looks like my nook hangs gparted. Tried on 2 different PCs and no effect. Tried different version of Gparted Live (i486 & amd64) - still nothing.
Of course noogie is inside the nook unit, ready and steady. Already made a backup of (non-rooted) device, plus partitions are visible in Minitool Partition Wizard on Windows 7.
What to do in this situation? Is Linux the only safe way to repartition device? Or maybe Minitool would be as effective and safe?
If Linux is the only way to go, how to make nook visible to Gparted?
Please, experts.
DJ Athlon said:
I have a little (maybe big?) problem. Can't partition with Gparted Live, as gparted scans my /dev/sdb (nook) infinitely. If I plug out my nook, other partitions (in my case: /dev/sda) become visible and ready. Looks like my nook hangs gparted. Tried on 2 different PCs and no effect. Tried different version of Gparted Live (i486 & amd64) - still nothing.
Of course noogie is inside the nook unit, ready and steady. Already made a backup of (non-rooted) device, plus partitions are visible in Minitool Partition Wizard on Windows 7.
What to do in this situation? Is Linux the only safe way to repartition device? Or maybe Minitool would be as effective and safe?
If Linux is the only way to go, how to make nook visible to Gparted?
Please, experts.
Click to expand...
Click to collapse
If Gparted doesn't work for you, I'd highly recommend Minitool Partiton Wizard - it's what I used to partiton my Nook. Nice, easy UI, too.
Yeah, I often work with Minitool, but is it as safe as Gparted when it comes to nook?
DJ Athlon said:
Yeah, I often work with Minitool, but is it as safe as Gparted when it comes to nook?
Click to expand...
Click to collapse
Yeah, it is. Just make sure to make a Noogie backup before repartitoning.
Sorry for bugging you, but can't shrink userdata(ext3). What to do? Delete that partition and re-create it or...?
DJ Athlon said:
Sorry for bugging you, but can't shrink userdata(ext3). What to do? Delete that partition and re-create it or...?
Click to expand...
Click to collapse
Yes, delete and recreate is the way to go.
Please, people, help me
Write step to step guide for work with Minitool Partiton Wizard
I want to free the reserved space for B&N books of my NST ver. 1.2.1
The device is already rooted.
I installed Minitool Partiton Wizard on my PC, but after connecting it thru USB cable with my Nook, it only see "official" 240MBs.
Cannot find other around 750 MB reserved storage for B&N books ?
What to do
Explain to me, please