Database Users

Paragon Partition 9.0 problem

after tryin to partition my sd, it went throught the steps then at the end it said restart needed, and after it restarted it started up in this safe mode type screen before vista loaded and said some error....did it partition the card? because when i look at properties of card it only says i have free space that is size of fat32....that i left...cant see if it made ext2

caleoss said:
after tryin to partition my sd, it went throught the steps then at the end it said restart needed, and after it restarted it started up in this safe mode type screen before vista loaded and said some error....did it partition the card? because when i look at properties of card it only says i have free space that is size of fat32....that i left...cant see if it made ext2
Click to expand...
Click to collapse
Windows cannot see ext2 partition. your best but is to open partition manager or use a linux distro to see it.

i wish Paragon didn't exist, i have seen so many problems people have been having trying to use Paragon. if everyone just downloaded a linux distro it would work perfectly every time and we wouldn't have 15 threads about Paragon problems

tubaking182 said:
i wish Paragon didn't exist, i have seen so many problems people have been having trying to use Paragon. if everyone just downloaded a linux distro it would work perfectly every time and we wouldn't have 15 threads about Paragon problems
Click to expand...
Click to collapse
i cant use that on windows vista can i?

download a linux distro and burn to a disk, then shut down your comp and reboot to the disk. then when you boot to linux click System>Administation>Partition editor. it's easier then trying to use paragon

tubaking182 said:
download a linux distro and burn to a disk, then shut down your comp and reboot to the disk. then when you boot to linux click System>Administation>Partition editor. it's easier then trying to use paragon
Click to expand...
Click to collapse
i have no idea how to use that, where do i get it from, i have eclipse on my comp but dont think that has anything to do with this

nope go here i have a step by step. i will be adding screenshots, but i didn't have a chance today as i was trying to meet up with some guy to buy my phone(tilt)

Your best bet is to start clean. Delete all the partitions so your entire sd card is "unallocated space".
Create a new partition for Fat32. Don't use all free space (Duh)
Create another partition for ext3 (use ext2 if your rom doesn't support ext3 yet). Just use all the remaining space
Windows cannot see the ext partition but if you want to see the amount of space used just open up paragon partition manager and it will tell you.

I dont know if you fixed the problem yet, but I think I have a solution for you.
If you're trying to do this using the phone to mount the sd card, it won't work when it boots up to that safe mode looking window, because the g1 won't stay mounted. You need to use a card reader, there's no other way around it that I've been able to find.
Also if you're using 64bit edition of windows vista, paragon has tons of problems. If that's the case, you need to create the recovery cd within paragon, then boot to it, and you'll be able to make all the changes there, using a card reader of course.
To check if it made the partition, just have the sd card connected to the computer (g1 will work for this) then open up paragon and open the partition manager, and where you're sd card is there would be another partition, right next to your fat32 partition. If its ext2 format it would be highlighted yellow.

PPM9 works just fine, you just have to keep remounting the SDCard when Windows reboots. I've had it dismount during the boot too, you just have to watch your phone screen and remount it if it unmounts.

I need help!

Hi guys. sorry if im being ignorant but i cant seen to find a proper guide on how to partition my class 6 sd card correctly.
i have rav1.2.0g recovery image which alows me to partition the card 3 ways but it doesnt seem to be right. is the card after partitioning meant to be assigned different drive letters? or is it only meant to show as one complete partition. also, do i partition after flash or before?
sound like an idiot but id like to be sure what im doing
any help appreciated. thanks

bump!! no takers?

in rav 1.2.0g, all you would have to do is select from the two format options in the image... you can either select from fat32 + ext + swap for apps2sd, or just plain fat32 if you do not want to utilize apps2sd (some roms do not support installing without apps2sd)...
i can verify that it works just fine for both format options...

If you're using Windows, you will still only see one drive and it will probably still have the same drive letter.
2 of the 3 partitions are formatted in a format Windows does not understand (ext3 and Linux swap) so it does not present them in Windows Explorer. If you use some sort of partition editing program you will be able to verify the partitions exist and are the right size etc. If you've used amon_ra's recovery tool to partition your SD card you should be OK, it's what I used and it worked perfectly for me.

[How-to]Darktremors apps2sd on Froyo

Edit: I made some scripts that you can run from gscript lite found in market for free. This script will mount the last partition so your windows pc will see it. There is one for mount and one for unmount. Plug your phone in pc and run the mountsd script and your window should pop up on the pc with the folder showing the partition that your froyo rom is using. If you have your card partitioned differently then these instructions then you can just edit the mountsd script where it says /dev/block/mmcblk0p4. Change the 4 to the number of the fat32 partition that you want it to mount. http://www.multiupload.com/HNIKCP720C
If you want to copy from froyo partition to recovery partition try this
Conap said:
No need to stop being lazy but you gotta give me a minute lol...download script and run it in gscripts. In File Manager if you press the home button you will see sdcard and sdcard2. sdcard is the froyo partition and sdcard2 is the recovery partition of the card. I am sure you can get to it in astro too but don't have it downloaded to test. Just navigate to the root folder of the phone and it should have the sdcard2 directory. This will stick untill you reboot then you will have to run the script again.
Click to expand...
Click to collapse
We all have seen that froyo doesn't like partitioned sd cards. After many attempts at partitioning my sd card for another project i'm working on I figured out a way to install the "old" apps2sd on Froyo. I know alot of people preferred the way it was done in 2.1. Froyo seems to use the last partition on the sd card at least untill the 7th partition which it stops looking after that. Amon's recovery works with the first partition on the sd card. So the solution is to put a Fat32 partition as the first partition then put your ext3 and swap partitions and then a 4th partition as fat32 for the phone to use when booted. The important thing to remember is to put any rom's you want to flash on the first partition. Your nand backups will also be stored on the first partition. Pictures, music, video's, stuff you download to the phone and any other normal stuff that uses sd card will end up on 4th partition. I will give instructions using a program called gparted. I think it is available for windows also. This should work with any type of partitioning software.
I will leave the original instructions at bottom of post but after a lot of partitioning my sd card for this project and the ubuntu/debian project and the DualRom project I've found that this method is a little better. I believe someone else linked to this method somewhere in this thread
Conap said:
THIS WILL DELETE EVERYTHING OFF OF YOUR SD CARD
ok try this...boot phone into recovery...hopefully you have amon's recovery cause I don't think clockwork uses parted(not sure). Then type or copy/paste these commands:
adb shell
parted /dev/block/mmcblk0
rm 1
rm 2
rm 3
rm 4
mkpartfs primary fat32 0 2000
mkpartfs primary ext2 2001 2500
mkpartfs primary linux-swap 2501 2550
mkpartfs primary fat32 2551 7948
quit
Depending on the number of partitions on your sdcard currently it may say error after the rm 1,rm 2, rm 3, rm 4 commands. You can ignore them.
Then reboot your phone or copy the file you want to flash back on to card and flash it.
Click to expand...
Click to collapse
PLEASE BE CAREFUL WHEN USING A FORMATTING PROGRAM THAT YOU ONLY REFORMAT YOUR SD CARD AND NOT YOUR HARD DRIVE
1. BACK UP YOUR SD CARD!!!!!!!!(this will erase all data on sd card)
2. Plug your phone into your pc and mount the sd card(like you would if transferring files from pc to your card)
3. Open GParted and on the bar at the top click Gparted then devices and choose the phone( should be the second in the list if you only have one hard drive and no other external storage devices connected)
4. On the gparted screen you will see the partitions of your sd card. There should only be one at the moment if you are already using froyo. Right click on all of the partitions and click unmount and then delete. This will delete everything on your sd. Please be sure you have backed up your card.
5. You should now have one line that says unallocated.
6. Right click on unallocated and click click new. It will bring up a screen that has size and type of partition sizes. The only things you need to change are the size and type. For the first partitions I used 2000mib in the new size box but I keep around 5 Nand backups and 10 to 15 rom's stored on my card at a time. If you do not do alot of nands and store alot of roms you could probably make this partition smaller. Then under file system choose fat32 from the dropdown menu and choose add.
7. Right click on unallocated again and click new. This will bring up the screen to chose size and file system again. Normally people use 500mb for the ext3 partition for apps2sd. You can adjust the number to fit your needs. Choose your size and then make the file system ext3 and click add.
8. Right click unallocated again and click new. This partition should be around 50mb and choose file system as linux-swap.
9. Right click unallocated and new again. This will be the partition you use for your media on your phone such as pic's or music. You will want to use the rest of the space left on your card for this partition. Choose fat32 for the file system and click add.
10. You should now see 4 sections listed. First and last should be fat32, second ext3 and 3rd linux-swap. If it looks correct you hit the checkmark button at the top of the gparted screen. It will make all changes to your sd card. You can then unmount your card and make sure your phone reads it. I reccomend taking 1 picture before copying the stuff you backed up back onto your card.
Remember to put your Nand folder and any roms onto partition 1 and all other stuff you backed up on partition 4. When your card is setup you can go to http://forum.xda-developers.com/showthread.php?t=715933 to get the zip to flash to install the apps2sd. Install apps2sd as per instructions on that thread.
I have apps2sd currently running on my phone with CELB3.2 and it is working fine. I set my card up on a linux machine with gparted.

you are the man Conap ...currently running your 3.2froyo, which BTW is smooth as heck....what I hate the most about froyo is there A2sd setup ....and you have just solved that problem

rvpartsguy said:
you are the man Conap ...currently running your 3.2froyo, which BTW is smooth as heck....what I hate the most about froyo is there A2sd setup ....and you have just solved that problem
Click to expand...
Click to collapse
Well if you or anyone else that has windows test's this can someone report if you can access both fat32 partitions when you mount the phone in windows....

I'll be trying this ish later. Superb work conap. I'm on windows, I'll let you know how it goes as well
Sent from my Droid Eris using XDA App

I'm undecided if I'll try this, but if I do it'll probably more to see how it works under Windows than to use it myself.
I wish the best of both worlds, being able to have Widget apps installed to SD card, but not have separate partitions, and still be able to specify applications I want to remain in the phone memory, for speed.
No matter what, though, beautiful! Thanks for writing up the instructions!

roirraW "edor" ehT said:
I'm undecided if I'll try this, but if I do it'll probably more to see how it works under Windows than to use it myself.
I wish the best of both worlds, being able to have Widget apps installed to SD card, but not have separate partitions, and still be able to specify applications I want to remain in the phone memory, for speed.
No matter what, though, beautiful! Thanks for writing up the instructions!
Click to expand...
Click to collapse
I agree it would be nice to have the option to move specific apps back to the phone. But I have seen alot of people that prefer this way so I thought i'd write this up. I actually needed partitions for other things which is why I was looking into it anyway. I now have 8 partitions on my sd card and everything still functions correctly. I did find that Froyo would read the last partition on the sd card up untill 7 partitions. When I added an 8th partition it still looked at partition 7. In case any one was interested in more partitions just make sure the fat32 is last partition untill you have more then 7 leave 7 as fat32.

Conap said:
I agree it would be nice to have the option to move specific apps back to the phone. But I have seen alot of people that prefer this way so I thought i'd write this up. I actually needed partitions for other things which is why I was looking into it anyway. I now have 8 partitions on my sd card and everything still functions correctly. I did find that Froyo would read the last partition on the sd card up untill 7 partitions. When I added an 8th partition it still looked at partition 7. In case any one was interested in more partitions just make sure the fat32 is last partition untill you have more then 7 leave 7 as fat32.
Click to expand...
Click to collapse
Do you have a 16GB or larger card? Wow!
Very interesting information, thank you!

roirraW "edor" ehT said:
Do you have a 16GB or larger card? Wow!
Very interesting information, thank you!
Click to expand...
Click to collapse
nope just stock 8gb...mostly small partitions for testing some ideas lol...i did find that the phone does not mount any more then 7 partitions(kernel limitation maybe) You can have more then 7 if you are useing your card for things other then the phone but for phone purposes 7 is the limit.

How do I plug my phone into my computer?

need help!!
Hi I accidently run the 'makeboot' from gparted iso on my windows Vista 32bit HDD, before I read it will damage windows boot and can only run it on SD card.
Now I have not restarted my laptop, to loose every thing, I need help to correct it!
Please guide my, what are my options.

Conap said:
nope just stock 8gb...mostly small partitions for testing some ideas lol...i did find that the phone does not mount any more then 7 partitions(kernel limitation maybe) You can have more then 7 if you are useing your card for things other then the phone but for phone purposes 7 is the limit.
Click to expand...
Click to collapse
Oh, okay! Nosey people (me) want to know. Hehehe.
workshed said:
How do I plug my phone into my computer?
Click to expand...
Click to collapse
You're messing with me, right? The USB cable that came with your phone, that you can also charge your phone with???

ykhehra1 said:
Hi I accidently run the 'makeboot' from gparted iso on my windows Vista 32bit HDD, before I read it will damage windows boot and can only run it on SD card.
Now I have not restarted my laptop, to loose every thing, I need help to correct it!
Please guide my, what are my options.
Click to expand...
Click to collapse
You'll probably have to boot your Vista 32-bit installation DVD and run a Startup Repair. Or if the computer came with a recovery DVD that you hopefully burned after booting up the computer the first time, use that.
If you don't have any easier option, you can download Startup Repair-only burnable disc images from the EasyBCD website. Just google for it. Make sure and download the correct one (Vista 32-bit), and then you'll have to burn it to a CD and boot from it. Hopefully you're computer doesn't have any SATA or RAID setup that Vista doesn't include the drivers for, otherwise you'll have to download those and put them on a flash drive, and then you can load them from the Vista repair CD.
Good luck.

ykhehra1 said:
Hi I accidently run the 'makeboot' from gparted iso on my windows Vista 32bit HDD, before I read it will damage windows boot and can only run it on SD card.
Now I have not restarted my laptop, to loose every thing, I need help to correct it!
Please guide my, what are my options.
Click to expand...
Click to collapse
There is no makeboot option on gparted in linux that i can see...if you think you have messed up the boot partition of your pc don't restart it till you fix it. Google should be your best friend on that one. I don't use windows so can't be of any help to you there....

roirraW "edor" ehT said:
Oh, okay! Nosey people (me) want to know. Hehehe.
You're messing with me, right? The USB cable that came with your phone, that you can also charge your phone with???
Click to expand...
Click to collapse
LMAO
What's a usb cable... is it that black thing with a square end??

Its g8 solution, good job! little tricky on windows, but worked at the end.

workshed said:
LMAO
What's a usb cable... is it that black thing with a square end??
Click to expand...
Click to collapse
Ooooh, you got me. LOL!

ykhehra1 said:
Its g8 solution, good job! little tricky on windows, but worked at the end.
Click to expand...
Click to collapse
Are you able to get both FAT32 partitions (partition 1 for ROMs and other flashes, partition 4 for everything else) mounted with drive letters under Windows?

is there an advantage to doing this? i'm just curious

asilentcivilian said:
is there an advantage to doing this? i'm just curious
Click to expand...
Click to collapse
nevermind, i found the 2.1 dark tremor thread. i assume the same results apply to froyo with this.

asilentcivilian said:
is there an advantage to doing this? i'm just curious
Click to expand...
Click to collapse
some people just prefer this way. this way actually stores the whole apk on the phone and save's more room then froyo. plus you can mount your sd card while still using your apps. I did this mainly cause I wan't partitions for other things on my phone personally. It just happens that it helps the apps2sd issue too...

Clone SD card (with a2sd on)?

Question:
I've noticed I'm pretty much at my limit for space on my current SD card (like 80MB remaining on a 4GB!)...
I've ordered an 8GB card to replace this one... but how can I "clone" my current 4GB card (with a2sd partitions) and then copy it over to my 8GB card, without losing data, settings, apps, etc? Is there a way?
Thanks in advance.

Do this all from within Clockwork Recovery:
1) Make a nandroid backup
2) Connect the phone to a computer
3) Partitions menu > mount USB storage
4) Copy all contents from the old SD card to a temporary folder on your computer (including the clockworkmod folder which contains the nandroid backup you just took)
5) Unmount and disconnect from computer.
6) Pull battery to shut the phone off, or if you would prefer you can boot the phone and then turn the phone off immediately afterward. Pulling battery just saves time.
7) Put new SD card in
8) Boot into clockwork
9) Format the card with Clockwork w/ ext partition
10) Connect to computer, mount USB storage again, copy all files back to the phone
11) Unmount and disconnect cable from computer
12) Nandroid > advanced restore > Restore sd-ext only
13) Reboot and you're done.
And if something goes wrong, it's not really a big deal since you will still have the original files on the old SD card so you can try again or ask for help to try another method.

Sounds complicated enough to work. I'll try when the card comes and let you all know. Thanks!

gfinockio said:
Sounds complicated enough to work. I'll try when the card comes and let you all know. Thanks!
Click to expand...
Click to collapse
Haha yeah, I think it's the easiest way to do it with Windows, since you can't read the ext partition from the computer. You could probably just copy the contents of both partitions through Linux if you're comfortable doing that.

Doesn't a nandroid backup the ext partition too?
If you're using windows you could just backup your fat32 partition on your PC and partition your new card and then copy all your files back and do your nandroid restore.
I think this would work...

jdwhite87 said:
Doesn't a nandroid backup the ext partition too?
If you're using windows you could just backup your fat32 partition on your PC and partition your new card and then copy all your files back and do your nandroid restore.
I think this would work...
Click to expand...
Click to collapse
Clockwork does not back up my ext partition. It can't mount it or anything. Not sure why. Might be because its ext4, but when I do nandroids the sd-ext backup always fails.
I have to use Ubuntu and mount as storage. Then both of my partitions mount on my computer and I can do as I please. For me this seems easiest anyway. Simple copy and paste and it can be done from a live cd for those that dont already have Ubuntu.
Sent from my cm7 Aria.

drumist said:
Do this all from within Clockwork Recovery:
1) Make a nandroid backup
2) Connect the phone to a computer
3) Partitions menu > mount USB storage
4) Copy all contents from the old SD card to a temporary folder on your computer (including the clockworkmod folder which contains the nandroid backup you just took)
5) Unmount and disconnect from computer.
6) Pull battery to shut the phone off, or if you would prefer you can boot the phone and then turn the phone off immediately afterward. Pulling battery just saves time.
7) Put new SD card in
8) Boot into clockwork
9) Format the card with Clockwork w/ ext partition
10) Connect to computer, mount USB storage again, copy all files back to the phone
11) Unmount and disconnect cable from computer
12) Nandroid > advanced restore > Restore sd-ext only
13) Reboot and you're done.
And if something goes wrong, it's not really a big deal since you will still have the original files on the old SD card so you can try again or ask for help to try another method.
Click to expand...
Click to collapse
I'm stumped on step 9 - what menu option in Clockwork will format the ext partition? What menu?

gfinockio said:
I'm stumped on step 9 - what menu option in Clockwork will format the ext partition? What menu?
Click to expand...
Click to collapse
Partitions menu

CallMeAria said:
Partitions menu
Click to expand...
Click to collapse
What version has that menu option? I don't see it.

Interesting. I was sure you could format a card with ext partition through Clockwork but apparently you can't. You can do it through ROM Manager though, so I guess you may have to boot into the phone to get to it.
The programs on the ext partition won't show up yet of course. Don't be alarmed. Just partition the card through ROM Manager, then once you're done doing that, do the nadroid advanced restore. If there are any problems after a reboot (i.e., it didn't work correctly), go back and try doing the regular full nandroid restore.

gfinockio said:
What version has that menu option? I don't see it.
Click to expand...
Click to collapse
v2.5.0.1
This doesnt create a partition though. It just formats an existing partition. You'll have to use drumist's method of going through Rom manager to actually create the ext3 parition from the phone.

CallMeAria said:
v2.5.0.1
This doesnt create a partition though. It just formats an existing partition. You'll have to use drumist's method of going through Rom manager to actually create the ext3 parition from the phone.
Click to expand...
Click to collapse
Tried running ROM Manager - of course, it's installed on the 4GB card which isn't on my phone when I have the 8GB in to format. So then I re-installed it using the APK... but I get the exclamation mark when it boots to recovery to format... probably because a2sd is installing the same program on the ext part which it is now trying to format.
I think I'm going to have to format/partition it using Linux somehow instead, no?

gfinockio said:
Tried running ROM Manager - of course, it's installed on the 4GB card which isn't on my phone when I have the 8GB in to format. So then I re-installed it using the APK... but I get the exclamation mark when it boots to recovery to format... probably because a2sd is installing the same program on the ext part which it is now trying to format.
I think I'm going to have to format/partition it using Linux somehow instead, no?
Click to expand...
Click to collapse
someone recommended in another thread that when that happens you just pull out the battery and then use volume down+power to boot back into recovery and it should then work.
But the method I use is to do it from Ubuntu (a linux version). If you dont want to install Ubuntu on your computer you can make a bootable CD or USB drive with Ubuntu on it (directions for this are on the Ubuntu download page) and actually run Ubuntu from the CD/USB without ever installing it on your computer. From there you can use gParted to create paritions. And while I recommend making backups, gparted even allows you to resize and move partitions without deleting anything.

gfinockio said:
Tried running ROM Manager - of course, it's installed on the 4GB card which isn't on my phone when I have the 8GB in to format. So then I re-installed it using the APK... but I get the exclamation mark when it boots to recovery to format... probably because a2sd is installing the same program on the ext part which it is now trying to format.
I think I'm going to have to format/partition it using Linux somehow instead, no?
Click to expand...
Click to collapse
Yeah, that's what I was worried about. My suggestion then is to format the card through linux if you have a SD card reader. Easiest way is to use an Ubuntu LiveCD. Do you know how to do this on your own?
Also, definitely do a full nandroid restore once the SD card is reformatted. Since you booted the phone and tried to install an app, it's possible something got screwed up -- nothing to worry about though because a full nandroid restore should revert everything.

drumist said:
Yeah, that's what I was worried about. My suggestion then is to format the card through linux if you have a SD card reader. Easiest way is to use an Ubuntu LiveCD. Do you know how to do this on your own?
Also, definitely do a full nandroid restore once the SD card is reformatted. Since you booted the phone and tried to install an app, it's possible something got screwed up -- nothing to worry about though because a full nandroid restore should revert everything.
Click to expand...
Click to collapse
I'm reverting back now, going to sleep on it, and then investigate formatting it via LiveCD tomorrow morning. It's been several years since I've had to go near anything Unix.

By the way, another option is to just do a clean install on your phone with a ROM that has ROM Manager built in. Use that to do the format on the SD card.

drumist said:
By the way, another option is to just do a clean install on your phone with a ROM that has ROM Manager built in. Use that to do the format on the SD card.
Click to expand...
Click to collapse
That got me thinking...Ive never had a problem adding an ext partition using Rom Manager. Ive done it to 3 SD cards now without a single issue. BUT, Ive also always done it while on cm6/7 which both came with Rom Manager pre-installed with the rom and quite a bit of integration with the rom manager app...just a thought...
EDIT: Scratch that, I used it for 2 SD cards, the 3rd was done with Ubuntu.

Here's my post from the other thread
jdwhite87 said:
Rom manager - partition SD card - choose your partitions. It will reboot into recovery and try but fail to partition your card. Pull battery. Replace battery - hold volume down and power. Wait for it to try and find the libde. Img then press volume down and it will highlight recovery then press power. It will boot into recovery and finish partitioning your card.
I think that's how I got it to work.
Click to expand...
Click to collapse
I did this with two different SD cards on fr008. Both were sandisks. One was a 16 gb class 4 and the other was an 8 gb class 6. I couldn't get gparted to partition the 8 gb for whatever reason. I didn't know what Ubuntu was when I partitioned the 16 gb

It seems like an oversight that maybe of the masses of people with Android devices that one day the general (non-xda) population would want a simple way to transfer their sd card data to a larger card...
I Imagine there are a bunch of people out there clueless.
Hell, I read XDA and there was still no clear simple way in this thread.
(I got here from a Google search for SD CARD CLONE)

Got it to work, finally. Required some back-and-forth with the Nandroid backups, but I have everything running off of my 8GB SD card now, without reinstalling!
Now, to sell off my 4GB card... anyone?

[Tutorial] How to part your micro SD card into ext4 using GParted Live CD?

[Tutorial] How to part your micro SD card into ext4 using GParted Live CD?
Disclaimer: I am not responsible for dead micro SD. Please do it at your own risk
Hello All,
Please find the below tutorial to part your micro SD card into ext4.
Required:
• Micro SD card
• Card Reader/Micro SD card Adaptor (Make sure drivers are already installed)
• GParted live CD (Download: http://gparted.sourceforge.net/download.php)
• Image Burner Software
• Another computer or screenshot to read this tutorial as you cannot use your computer while partition
• Take backup of all your data in your SD card.
Ok that’s all…. Let’s start now.
• Burn the downloaded GParted live (GPL) CD using any image burner (I used Roxio to burn image) to CD
• Once completed, insert your card reader/MSD Adaptor and check drivers installed. (Don’t remove your card reader/MSD Adaptor)
• Insert GPL CD (burned CD) and reboot your PC and get into boot mode F12 in W7.
• Now you will see GPL boot screen. Select GPL default. (Some codes will be appearing for few mins)
• Then a small screen will appear (Configuring console data). Hit escape and see below to select language. Enter 33 for US English and Enter 0 (Continue to start X to use GP automatically)
• New screen will appear. See right corner of the box to select your memory card (Very important step: make sure you haven’t selected your PC’s hard disk)
• Now you will see your memory card in the middle of the screen with the total memory and partition (if any). Right click and delete the existing format for all partitions.
• Now you will see the entire memory card space as unallocated. Right click and select new (New box will open) Select as below mentioned.
Create as “Primary Partition”
File System “Fat32”
Free Space following (MIB) XXXX (This free space will be your ext4 allocate accordingly) E.g. ext 4 required 2GB then enter 2048MB
• Now GPL will throw you back to main screen. Right click on unallocated space and select new.
Create as “Primary Partition”
File System “ext4”
• Select “Apply” in main screen. Wait for few mins.
Congratulations!!!! You have successfully parted your SD card.

Is it the same as partitioning thru CWM4? If we partition via CWM4 the result is EXT4, A2sd can run with it. Why the long process? Just want a clarification is it really different?

royskeyz said:
Is it the same as partitioning thru CWM4? If we partition via CWM4 the result is EXT4, A2sd can run with it. Why the long process? Just want a clarification is it really different?
Click to expand...
Click to collapse
Hi,
I tried doing partition using CWM4 which resulted in ext3 and not ext4. Hence I created this long process partition.

Just create a 2 partition using cwm then install link2sd from market . Using link2SD make a partition into ext 4

i think its more easy and safe to use minitool partition manager. no need to burn, boot livecd whatsoever.. and gparted livecd can become a dangerous tool in wrong hands. linux livecd is not something to be played around just to partition sdcard. just a simple wrong click and ur windows partition would be trashed.

Just a little advise.. if you really want to use gparted better you do that in linux enviroment such as ubuntu etc..but if you are windows user then use mini partision home 6..its more easy n safe..Cmiiw
Sent from my GT-S5830

Is minitool partition can be used to format sd cards into ext4..?

geraldgeron said:
Is minitool partition can be used to format sd cards into ext4..?
Click to expand...
Click to collapse
sure it can

one question, in a 4 gb sd card how much it should be the partition?

vlc_marcos said:
one question, in a 4 gb sd card how much it should be the partition?
Click to expand...
Click to collapse
Hi,
I would suggest atleast 512MB as ext4.

thanks, and this partition is for what, so make like an extre space for the phone?

vlc_marcos said:
thanks, and this partition is for what, so make like an extre space for the phone?
Click to expand...
Click to collapse
Yes.. it will and then you can transfer your Phone internal memory data to sd card.

an0nym0us_ said:
sure it can
Click to expand...
Click to collapse
Oh yeah..?
But the last time i had partitioned my sd to ext2..option was only upto ext3..
How can i prtition it using minitool?
Sme as partitioning way of ext2?..
But how..?
Or maybe minitoolversion?

Problem with ex=sd part
I have rooted desire with 4gb that has 500mb ex sd partition, now i bot 8gb card and want to partition it but when i do it with mini tool phone does not see ext partition, why? I looked steps carefully and tryed it several times, thnx

cp6ija said:
I have rooted desire with 4gb that has 500mb ex sd partition, now i bot 8gb card and want to partition it but when i do it with mini tool phone does not see ext partition, why? I looked steps carefully and tryed it several times, thnx
Click to expand...
Click to collapse
Why not partition it using CWM recovery..??
It's much easier and faster
Sent from my GT-S5830 using Tapatalk

I also got the same problem.
Seems like miniTool is messing up..
I partitioned my 8GB sd card to 600MB ext4 and the rest FAT32.
But now not only the phone but even gparted(live usb/from linux) also cannot see ext4 partition.
I can only see it as 7.4 MB....
Not sure what exactly happened.
Edit: working now. after delete & partition again.

Insert GPL CD (burned CD) and reboot your PC and get into boot mode F12 in W7.
• Now you will see GPL boot screen. Select GPL default. (Some codes will be appearing for few mins)
• Then a small screen will appear (Configuring console data). Hit escape and see below to select language. Enter 33 for US English and Enter 0 (Continue to start X to use GP automatically)
i dont each and every thing as above but after that i stuck, there is just Black screen unblinking curser on left top corner. i tried 3, 4 time but same result.
""No new screet appeared as you mention below. what i should do now.."
" New screen will appear. See right corner of the box to select your memory card (Very important step: make sure you haven’t selected your PC’s hard disk)"

I follow this guidance for make partition on my sd card
http://androidandme.com/2009/08/news/how-to-manually-partition-your-sd-card-for-android-apps2sd/
it works for me. now I have:
512MB linux swap
1024MB ext4
6,5GB fat32
on my 8GB sd card