unreliable sms/dual notifications & cant use RUU after flashing from 1.6 - Hero CDMA General

I was running the 1.6 AOSP build with gbits and under that build I had the spotty sms error and I was getting notified by both handset and the stock app (even though it was disabled). I flashed back to a fresh 1.1 backup and the errors persisted. I then tried gumbo 1.5 and gutted Rom. The errors persisted on those too.
I tried to unroot using the .56 RUU and it gives me a usb connection error. I can't really see how all of this could be caused by the 1.6 build...
Anyone have any suggestions for a fix?

Does the same thing for me too. Maybe we should try both of the RUUs?

What Windows you running?
Also maybe try booting into the recovery, doing a factory wipe & then attempting to flash RUU 1.56 again.

I've tried both 1.6 builds. No dice.
I'm running 7 x64.
What Rom would you suggest I run when wiping and trying to flash the RUU?

It shouldn't matter which ROM your running when you wipe, because it's going to wipe it any ways. Also try to run RUU 1.56 as admin & see if that changes anything.

gu1dry said:
It shouldn't matter which ROM your running when you wipe, because it's going to wipe it any ways. Also try to run RUU 1.56 as admin & see if that changes anything.
Click to expand...
Click to collapse
The RUU doesn't have a problem running. It starts just fine. But once it tries to connect to my phone I get a USB connection error...if I remember right (im at work and can't check) HTC sync wasn't activating when I connected it to my pc...

Install the latest HTC Sync & still attempt to run the RUU 1.56 again as admin.

I'll give it a shot when I get home.

riotkid976 said:
The RUU doesn't have a problem running. It starts just fine. But once it tries to connect to my phone I get a USB connection error...if I remember right (im at work and can't check) HTC sync wasn't activating when I connected it to my pc...
Click to expand...
Click to collapse
This has been covered a dozen times, try searching "ruu" and see what you come up with.
The adb.exe is out of date, it must be replaced. From the sdk.

riotkid976 said:
I've tried both 1.6 builds. No dice.
I'm running 7 x64.
What Rom would you suggest I run when wiping and trying to flash the RUU?
Click to expand...
Click to collapse
Happended to me before. I just loaded up the ROM i was using went into settings/applications/unknown sources some how it was unchecked either when I did a factory reset or something but it worked after

gu1dry said:
Install the latest HTC Sync & still attempt to run the RUU 1.56 again as admin.
Click to expand...
Click to collapse
did that. and re-installed my sdk just for good measure. no dice.
thedudejdog said:
This has been covered a dozen times, try searching "ruu" and see what you come up with.
The adb.exe is out of date, it must be replaced. From the sdk.
Click to expand...
Click to collapse
Searching the CDMA forum for "RUU" returns nothing. I pulled the adb.exe from the sdk and put it in the RUU directory. no changes. I still get error 170: usb connection error...
athlet1c said:
Happended to me before. I just loaded up the ROM i was using went into settings/applications/unknown sources some how it was unchecked either when I did a factory reset or something but it worked after
Click to expand...
Click to collapse
its not that. I've checked.

riotkid976 said:
did that. and re-installed my sdk just for good measure. no dice.
Searching the CDMA forum for "RUU" returns nothing. I pulled the adb.exe from the sdk and put it in the RUU directory. no changes. I still get error 170: usb connection error...
its not that. I've checked.
Click to expand...
Click to collapse
humm... you are right about that search thing. wierd, anyway.
here is a link to the RUU thread
http://forum.xda-developers.com/showthread.php?p=5354225#post5354225
and this is the exact post that holds the exact directions that should get you up and running
crunchybutternut said:
Just had a thought.. after updating my HTC Sync software the adb included with my RUU might be out of date. I copied adb.exe, AdbWinApi.dll and fastboot.exe from C:\AndroidSDK\Tools and overwrote the files in the RUU folder. Then I ran it without a hitch.. weird, eh?
Click to expand...
Click to collapse

thedudejdog said:
humm... you are right about that search thing. wierd, anyway.
here is a link to the RUU thread
http://forum.xda-developers.com/showthread.php?p=5354225#post5354225
and this is the exact post that holds the exact directions that should get you up and running
Click to expand...
Click to collapse
That is quite the foreign concept to me. I don't understand how an .exe could "expire"; but it worked so I guess I don't need to understand! Thanks SO much!

Related

Sorry to be such an idiot but...

I was trying to upgrade my SX66 from the factory Windows2003 to WM6 with this HELMI_BA_WM6_R0_ installer. I started the install and it crapped out giving me an error saying that it could not communicate with my device and that I needed to plug my device back in and retry it. My SX66 is now stuck on the bootloader as I'm sure the ROM isn't complete, and the installer does nothing now. Can someone please help this noob out? I'd really like to have my phone back lol.
N1cholas said:
I was trying to upgrade my SX66 from the factory Windows2003 to WM6 with this HELMI_BA_WM6_R0_ installer. I started the install and it crapped out giving me an error saying that it could not communicate with my device and that I needed to plug my device back in and retry it. My SX66 is now stuck on the bootloader as I'm sure the ROM isn't complete, and the installer does nothing now. Can someone please help this noob out? I'd really like to have my phone back lol.
Click to expand...
Click to collapse
Did you unlock the device first?
In any case, just try to reflash your device back to WM2003 with a stock rom. It does seem to be a bad flash. Also, which OS are you using (XP or Vista)?
Follow this in order to perform the upgrade properly...
Good luck!
egzthunder1 said:
Did you unlock the device first?
In any case, just try to reflash your device back to WM2003 with a stock rom. It does seem to be a bad flash. Also, which OS are you using (XP or Vista)?
Follow this in order to perform the upgrade properly...
Good luck!
Click to expand...
Click to collapse
I'm running windows version 7. and no i didn't unlock the device. i just ran the installer application (i hadn't found a detailed install manual) i'm not entirely sure how i can re-flash now, because i can't get a usb connection made because it's stuck in the bootloader.
N1cholas said:
I'm running windows version 7. i'm not entirely sure i can re-flash now, because i can't get a usb connection made because it's stuck in the bootloader.
Click to expand...
Click to collapse
By bootloader, do you mean the three colored screen?
egzthunder1 said:
By bootloader, do you mean the three colored screen?
Click to expand...
Click to collapse
no, the screen that says serial/usb at top and 2.07 at bottom
I just wanted to make sure that we were on the same page
In my opinion (and this is just a theory), Windows 7 (since it is a beta) does not have the necessary drivers to recognize the "usb device". Hence, when you put it in the cradle, it just doesn't see it. Again, this is just a theory...
You may want to get a hold of a machine with XP (that is if you didn't make the one you are using a dual boot). You should be OK if you try to flash via XP.
If everything else fails, you can always use mtty and flash via SD card (the procedure can be found in the wiki).
I had the device synced up before the install. it's just having issues syncing while it's in the bootloader mode. The device actually appears in the usb devices, but doesn't sync. i was thinking that the device might have to be authenticated with local software(on the sx66) in order to sync. I'm using the windows vista drivers. I do have this machine dual boot, but it's not any other version of windows i'm using
Your device does not have to sync in order to up/downgrade. Think about it this way... the RUU will put the device in bootloader anyways.
Just run the installer of the stock rom (the upgrade from Cingular).
@N1cholas: Please correct me if I'm wrong. I'm just a little confused. Are you expecting MS Active Sync to show as it usually does when you are syncing your phone? If that is the case, it won't happen when on boot loader. Are you getting any error when trying to flash or you haven't tried to flash yet?
Advise:
1. Keep your hopes, don't get despert. Egzthunter is a master
2. Make sure you follow the guide... Step by Step to upgrade.
3. If it'll take you too long to complete the reading and flashing, reset your phone and put it to charge. You won't be able to flash with a dead backup battery. Main and Backup battery won't charge while on bootloader.
Edit: @Egzthunder: Sorry mate, while I was thinking, drinking coffee and writing you had already replied Like I said, your the help master. Once again, I encourage the MODS to propose you to be part of their teem. You're always there to help.
Mark
i'm going to head off to school, but it's not working. when i try to run any mods i get an error saying that it cannot communicate with device.
Yeah! Egz for MODS!!! Woohooo and Xplode too and someday..me! LOL (no i mean it!)
windows 7 uses the same drivers as vista
beakybal4 said:
windows 7 uses the same drivers as vista
Click to expand...
Click to collapse
Why do you think I don't trust it?
@N1cholas,
I apologize since I ended up going to bed yesterday night.
I think your best bet will be to find yourself a PC running XP and try the reflash in that since it seems to me that something is going on with the OS.
@red and mark
Thanks for the support, guys!!! But you guys are awesome as well!
yeah, it's weird, it's just not working anymore. It appears in the device list and everything, but in WMDC it doesn't show up, and the rom install wizzards can't communicate with it either. I have been unable to find the upgrade ROM from cingular as it seems that the siemens' page has been removed. Also, I have a 2gb SD drive, but haven't been able to find information about flashing the SX66 from the SD.
N1cholas said:
yeah, it's weird, it's just not working anymore. It appears in the device list and everything, but in WMDC it doesn't show up, and the rom install wizzards can't communicate with it either. I have been unable to find the upgrade ROM from cingular as it seems that the siemens' page has been removed. Also, I have a 2gb SD drive, but haven't been able to find information about flashing the SX66 from the SD.
Click to expand...
Click to collapse
You will not see the device in any type of sync software (call it ActiveSync, WMDC, etc). I hvae uploaded the SX66 stock installer from Cingular, so give that a shot
Here you go
SX66Update.exe
Like I said... XP computer. Also, for the SD flashing, you need to look for something called mtty and instructions on how to use it.
the proper solution
1.MTTY method for unblocking bootloader mode
2.Upgrade the same way as in Vista to stock rom
3.Sim Unock, Repartition DOC
4.Upgrade vista way to any rom you like
there are guides in WIKI about this
egzthunder1 which version extrom version and radio are in this rom - the one you sharing? As you know i make public BA shipped rom collection, and any rom which is not there is welcomed
xplode said:
the proper solution
1.MTTY method for unblocking bootloader mode
2.Upgrade the same way as in Vista to stock rom
3.Sim Unock, Repartition DOC
4.Upgrade vista way to any rom you like
there are guides in WIKI about this
egzthunder1 which version extrom version and radio are in this rom - the one you sharing? As you know i make public BA shipped rom collection, and any rom which is not there is welcomed
Click to expand...
Click to collapse
Hey xplode,
To be perfectly honest, I haven't flashed 2003 since 2006, so I would be lying if I told you. Feel free to add it to your database if you wish. FYI, this is the upgrade that Cingular Wireless used to offer when the SX66 was still available in the at&t website.
MTTY doesn't have a USB option, it's only giving me COM1, COM2, COM3...
N1cholas said:
MTTY doesn't have a USB option, it's only giving me COM1, COM2, COM3...
Click to expand...
Click to collapse
Did you try the update that I gave you?
i ran it, and it said it was trying to get the settings from the device, then it just disappeared lol. now when i run it, it extracts the install data to the temp folder on my pc, then just disappears

Unable to get customruu.exe to work

Hey, got me a HD2 and have been trying the last few days to flash a custom rom. I downloaded energy's, ran HSPL3, even did a task 29. I synced with windows mobile 6.1, right clicked and ran as admin on both the customruu.exe as well as the one that comes with the rom and nothing appears. As seen on vids, a screen should pop up and tell you that you are about to update rom. I dont see it at all. I've eve reinstalled official rom and tried reflashing and nothing. Anyone have any idea on how to help me? Stock rom sucks and wanna do a custom. btw, i have no antivirus prog just to be sure and still no go. also, i have tried flash via sd, no go there too.
I had problems like this until I plugged USB directly into back of puter.
rsmurdoch said:
I had problems like this until I plugged USB directly into back of puter.
Click to expand...
Click to collapse
in the back of puter?
phantast1c said:
Hey, got me a HD2 and have been trying the last few days to flash a custom rom. I downloaded energy's, ran HSPL3, even did a task 29. I synced with windows mobile 6.1, right clicked and ran as admin on both the customruu.exe as well as the one that comes with the rom and nothing appears. As seen on vids, a screen should pop up and tell you that you are about to update rom. I dont see it at all. I've eve reinstalled official rom and tried reflashing and nothing. Anyone have any idea on how to help me? Stock rom sucks and wanna do a custom. btw, i have no antivirus prog just to be sure and still no go. also, i have tried flash via sd, no go there too.
Click to expand...
Click to collapse
Read here http:/http://forum.xda-developers.com/showthread.php?t=653614/
phantast1c said:
in the back of puter?
Click to expand...
Click to collapse
yes, in the back. Many pc's nowadays have usb ports built into the front of the computer case.
These ports will usually not work with hspl, and occasionally not with sync/flashing.
Look around back and use one of the ports there, which are directly connected to the pc's motherboard.

[Solved] How to restore to stock when RUU doesn't work?

Hi!
So.. My HTC Hero GSM has some issues that need to be repaired. Touchscreen not working in the lower part of the screen, constant headset-icon, trackball not working good. So I've contacted my repair center and they told me to send it in. So I want to restore my phone to as close to original as possible to be on the safe side.
The problem is I can't use the official RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver.exe(or any other version), without getting an error 155(apparently it has something to do with the rom not having correct filesize).
It doesn't matter what rom I'm currently using; Modaco, Villain, different kind of generics, but nothing affects the outcome.
I got a feeling it has to do with the recovery image I use(RA 1.6.2) or Hboot version(.0007), but I can't seem to flash a new one. Recovery flasher gives me "Backup FAILED: could not run command.", and since my HBOOT is .0007 I can't use remote command from fastboot to restore original.
1. Is it possible to downgrade HBoot from recovery mode? If so, does anyone have a update.zip I can use?
2. Could error 155 has something to do with the computer/OS im using?
3. Anyone has any other suggestions what I can try to restore?
Currently using:
HTC Hero GSM
Generic 2.73.405.38 (1.5)
Baseband 63.18.55.06OU_6.35.15.01
HBoot 1.76.0007
Any help is greatly appreciated!
/Jakob
Edit: Solved!
For anyone having issues with Error 155(CID-checks fail, perhaps?) or 171(USB fail) while trying to restore a rooted HTC Hero to stock with an official RUU-exe, this is what worked for me where nothing else did:
- Create Goldcard
- Extract ROM.ZIP from the Official RUU exe you want to use. I downloaded it from their main site
- Rename to HEROIMG.zip
- Boot to flashboot mode (Volume down + Power on)
- Flash.
- Reboot and enjoy your new stock HTC Hero.
1. Yes. There is an engineering hboot over at modaco (v2007).
2. No idea. You could just try re-downloading the RUU and doing an md5 check on it, might have been corrupted during download.
3. I forget what 3 was and I can't check cause I'm posting through tapatalk.
Hi!
Thanks for your fast reply.
I successfully flashed Hboot with 2007 and later with 0004, but it didn't make any difference when I tried to run the official RUU. I still get error 155 ("Unknown error").
I have since double, triple and quadruple-checked the download to make sure I've got the right RUU. And since I download it from HTCs official site, in the country where it is bought, it shouldn't be an issue. All the downloads I've made is also the same size..
I guess my last resort will be to try to flash the stock recovery image manually.
Anyone have that one lying around?
Du you have HTC Sync installed? Usb debugging on in the phone? Try flashing the RUU, when in fastboot. (VOLDOWN+ON)
I'm not sure what error 155 is.
HTC Sync installed, enabled on the phone. And the green little icon is green and the phone says connected. Usb debugging is enabled.
I will try starting in fastboot mode brb.
That didn't work either.
Still got error 155 Unknown error.
I also tried to restore my original recovery image in fastboot:
fastboot boot cm-hero-recovery.img
Click to expand...
Click to collapse
An this is what it said:
Downloading 'boot.img' ... FAILED (command write failed (Unknown Error)
Click to expand...
Click to collapse
The "unknown error" appears even here. Could it be that my phone is so broken it cant write to that area?
If you have access to recovery
Try;
HTC Generic 2.73.405.5 (update.zip)
http://www.romraid.com/paul/hero/update-hero-generic-2.73.405.5-signed.zip
if that fails try;
Goldcard Method
http://forum.xda-developers.com/showthread.php?t=572683&highlight=gold+card+method
if that fails try;
...... try the first 2 first then post back results. (Might be worth trying on another computer because unknown error 155 sounds like there could be an issue somewhere with the pc. Maybe build an XP vmware?
andrewb84uk said:
Try;
HTC Generic 2.73.405.5 (update.zip)
Click to expand...
Click to collapse
Already tried. Unfortunately didn't work.
andrewb84uk said:
if that fails try;
Goldcard Method
Click to expand...
Click to collapse
I did it, and now have a goldcard. Unfortunately I still get error 155. I also tried all this from a different computer than before. This time with win 7, but with no other result.
I guess next step will be to try it from XP. I will setup an virtual pc later and try it, but I have to admit I'm not hopefull... This is getting annoying.
Any other way you guys can think of? And I REALLY appreciate your help, this is driving me mad!
jakobahman said:
Already tried. Unfortunately didn't work.
I did it, and now have a goldcard. Unfortunately I still get error 155. I also tried all this from a different computer than before. This time with win 7, but with no other result.
I guess next step will be to try it from XP. I will setup an virtual pc later and try it, but I have to admit I'm not hopefull... This is getting annoying.
Any other way you guys can think of? And I REALLY appreciate your help, this is driving me mad!
Click to expand...
Click to collapse
Can you provide some screenshots, best thing you could do is do it from a fresh XP machine if you can.
Im setting up a new virtual xp just for this.
Ill be right back with some screens...
i usually do it thru the SD card
SiL3nTKiLL said:
i usually do it thru the SD card
Click to expand...
Click to collapse
I'm not sure what you mean. What do you do through the SDcard? And how?
jakobahman said:
I'm not sure what you mean. What do you do through the SDcard? And how?
Click to expand...
Click to collapse
HEROIMG via fastboot maybe?
But isn't that the same as using recovery mode to flash a rom?
As I stated previously I want to get my phone as close to stock as possible(ROM, Radio and recovery). Can this be done with HEROIMG? Am I missing something here?
jakobahman said:
But isn't that the same as using recovery mode to flash a rom?
As I stated previously I want to get my phone as close to stock as possible(ROM, Radio and recovery). Can this be done with HEROIMG? Am I missing something here?
Click to expand...
Click to collapse
I do believe... if you use the rom.zip taken from when you launch the RUU (remember to unhide hidden files) this also does radio hboot e.t.c. I did it with the tmobile rom and it did update radio. Rename it to HEROIMG.zip, put it on the root of the sdcard, boot into fastboot and it will find it and flash.
This is the contents of a rom.zip direct from an RUU i did tonight.
@android-info.txt
@boot.img
@hboot_7200A_1.76.0007_090804.nb0
@radio.img
@recovery.img
@splash1_Hero_TMO_G2_Touch.nb0
@system.img
@userdata.img
YES!!!
Finally!
Thank you Andrew and Silentkill!
For anyone having issues with Error 155(CID-checks fail, perhaps?) or 171(USB fail) while trying to restore a rooted HTC Hero to stock with an official RUU-exe, this is what worked for me where nothing else did:
- Create Goldcard
- Extract ROM.ZIP from the Official RUU exe you want to use. I downloaded it from their main site
- Rename to HEROIMG.zip
- Boot to flashboot mode (Volume down + Power on)
- Flash.
- Reboot and enjoy your new stock HTC Hero.
Thanks again for all the help!!
jakobahman said:
YES!!!
Finally!
Thank you Andrew and Silentkill!
For anyone having issues with Error 155(CID-checks fail, perhaps?) or 171(USB fail) while trying to restore a rooted HTC Hero to stock with an official RUU-exe, this is what worked for me where nothing else did:
- Create Goldcard
- Extract ROM.ZIP from the Official RUU exe you want to use. I downloaded it from their main site
- Rename to HEROIMG.zip
- Boot to flashboot mode (Volume down + Power on)
- Flash.
- Reboot and enjoy your new stock HTC Hero.
Thanks again for all the help!!
Click to expand...
Click to collapse
Well done... for a final outcome the error 155 means there is an issue with settings and if you get an error 155 more than likely a new windows setup will need to commence somewhere. (Install XP, Windows 7 et all. Error 171 is a usb driver issue to the phone I do believe.... glad to be of an assistance.
I don't think it has something to do with the OS. I tried the RUU .exe on three different setups; One laptop with Vista, one brand new laptop with Win7 home premium and one virtual PC with XP.
Maybe a "full" setup of XP would work, but I think it's more likely it is something else.
On the other hand, to just remove the OS from the equation solved it, so you might be right.
Oh, and the 171 error only occurred when the driver got messed up one time, so it really hasn't got much to do with my case. But this solution would work for people having that issue as well.
jakobahman said:
I don't think it has something to do with the OS. I tried the RUU .exe on three different setups; One laptop with Vista, one brand new laptop with Win7 home premium and one virtual PC with XP.
Maybe a "full" setup of XP would work, but I think it's more likely it is something else.
On the other hand, to just remove the OS from the equation solved it, so you might be right.
Oh, and the 171 error only occurred when the driver got messed up one time, so it really hasn't got much to do with my case. But this solution would work for people having that issue as well.
Click to expand...
Click to collapse
The errors are system related, thus when you use the HEROIMG.zip via fastboot you totally bypass the need for having a PC except to transfer files to the device. So I think it is a driver/OS issue.
EDIT: To the OP, edit your first post and add [SOLVED] to the front.... let users know there is a solution.
I hope you guys can help me, i have a G2 Touch and i'm about to try restore to stock by using SD-Card.
Problem is, when i unpack the RUU.exe (Firmware 2.73.111.26), there's no ROM.zip in it. Only thing i get is a Subfolder with several installation files and a data1.cab sized 104MB, which i can't open (nether with 7zip nor winrar)

How do I install the factory software?

I have flashed my phone over and over trying to get Puzzle Rom to work properly. Finally got it all working and upto now really happy with it although......
I would like to be able to flash it with the stock rom so that when Froyo comes out I can let it update to that. I would also like to have the 3 network software back on it as I liked being able to have live messenger etc and my3 so that I can check my usage.
I downloaded the rom from shipped roms but it is a RUU file and I don't know how to put it on, can anyone help??
tuktukscotty said:
I downloaded the rom from shipped roms but it is a RUU file and I don't know how to put it on, can anyone help??
Click to expand...
Click to collapse
Just plug your phone into your computer and run the RUU.exe on your computer.
Sent from my HTC Wildfire
Elibongo said:
Just plug your phone into your computer and run the RUU.exe on your computer.
Sent from my HTC Wildfire
Click to expand...
Click to collapse
Tried that but it says it cannot complete this as I need to get the right rom for my phone.
tuktukscotty said:
Tried that but it says it cannot complete this as I need to get the right rom for my phone.
Click to expand...
Click to collapse
Sorry, I presumed you had already created a goldcard. See this for all the instructions on creating a goldcard (do this before flashing) and how to flash:
http://forum.xda-developers.com/showthread.php?t=741651
A goldcard makes it so that you don't get that error.

Probles Falshing A New ROM

Ok, so I went to flash a new ROM on my phone, and when I go to the run the RUU, I get the screen with the 4 steps to complete, which are already completed, then hit next. Now I get "Error [240] : File Open" and below that it says "The Update Utility cannot open the requested file. Please check the update utility."
I tried downloading the Update Utility again, but it still does the same thing. Ive flashed my phone before, and Im pretty sure Im not doin anything different this time, but its not workin. Am I missing somethin?
Thanks
new-b said:
Ok, so I went to flash a new ROM on my phone, and when I go to the run the RUU, I get the screen with the 4 steps to complete, which are already completed, then hit next. Now I get "Error [240] : File Open" and below that it says "The Update Utility cannot open the requested file. Please check the update utility."
I tried downloading the Update Utility again, but it still does the same thing. Ive flashed my phone before, and Im pretty sure Im not doin anything different this time, but its not workin. Am I missing somethin?
Thanks
Click to expand...
Click to collapse
Check if your harddrive isn't full.
A RUU extract some files, and if your harddrive is full it can't
Nope, its not full. Far from it actually lol.
new-b said:
Nope, its not full. Far from it actually lol.
Click to expand...
Click to collapse
flashing trough sd-card?
im having the same problem i get the error code as well, is it possble to flash from the microsd. I am a nooby at this and understand how to flash.
xmoo said:
flashing trough sd-card?
Click to expand...
Click to collapse
Nope, win mo device center.
WeaponX2010 said:
im having the same problem i get the error code as well, is it possble to flash from the microsd. I am a nooby at this and understand how to flash.
Click to expand...
Click to collapse
Its in the tutorial, but I havent tried it yet. Ive never had a problem flashing through the USB before.
Tried it from the SD card. Went great. Just takes a little longer.
Still open to suggestions about usin active sync though.
xmoo said:
Check if your harddrive isn't full.
A RUU extract some files, and if your harddrive is full it can't
Click to expand...
Click to collapse
Hi xmoo. Can YOU please help? With this:
leo70 said:
URGENT MAJOR HELP REQUIRED *PLEASE*:
I am stuck on DFT boot screen (after doing 1234-vol up_down-wp7-reset) and this is *after* (wp7 here !) all the chains b4 that are done: ie: power on, hspl, htc, magldr- for windows phone 7 on hd2. Sometimes get thru to windows phone 7. but generally reboots. Done spl back to stock and leoimg on sd back to stock and tried task28s, 29s, etc but just reboots constantly and randomly.
Any thoughts here? What is warranty process? DO they replace at all with NEW? or new BOARDS/RAM? Gone back to 1.66 spl and sent in for repairs. because - the stupid recommended Romupdateutility HTC stock rom 'upgrade' did this damage. yes, was Windows Phone 7 and activated using dev hack with marketplace & xbox/live. Also - although I activate ok and can use it on market fine once it boots good - still when both my hd7 (hd2) and Mozart are signed into XboxLive using same address at same time: (mozart is legit fully/eula-signed etc) then the hd2 seems to reset a LOT here at this point. maybe this has something to do with usual xbox-live security? ie: http://www.wpcentral.com/hack-xbox-live-windows-phone-7-get-perma-banned-microsoft ?????????? please hlp me - I am fully capable of mtty, sd-leoimg, whatever it takes- but need to know why this would be the case? same with Android roms/stock too. Anyone know about task2a on hd2? how many bad blocks I should have? partition/re-partition droid or wp7 to avoid these bad blocks? I just WISH Cotulla/DFT let you run the windows phone 7 installer in such a way that all bad bloks could be excluded totally as if the never exist... ie make hd2 clean.
Click to expand...
Click to collapse
note: although I have gone bak to original spl+rom in past I have (both unsuccs &succesfully) have previously done task2a and even spl-mfg install and radios/roms as DEBUG/SPL-MFG. xmoo?

Categories

Resources