Official 1.66 ROM has bricked my HD2? - HD2 General

I have downloaded and installed the latest 1.66 ROM from the HTC website, in an attempt to get my phone in some semblance of how it should have been when I first bought it months ago.
The update completed successfully and I clicked Finish on the software in Windows. (I was previously running IIRC 1.43 official).
The phone rebooted and is now stuck on the white screen with green HTC and red version numbers at the bottom left. It doesn't change from this state.
So, is this a final slap in the face from HTC in the HD2 ownership debacle? Is there anything I can try besides a hard reset which didn't help?

Biffy said:
I have downloaded and installed the latest 1.66 ROM from the HTC website, in an attempt to get my phone in some semblance of how it should have been when I first bought it months ago.
The update completed successfully and I clicked Finish on the software in Windows. (I was previously running IIRC 1.43 official).
The phone rebooted and is now stuck on the white screen with green HTC and red version numbers at the bottom left. It doesn't change from this state.
So, is this a final slap in the face from HTC in the HD2 ownership debacle? Is there anything I can try besides a hard reset which didn't help?
Click to expand...
Click to collapse
Try flashing it again if possible. Might not be possible the same way you originaly did it but will hopefully work. Good luck

try hard reset (vol up, vol down and press on briefly - follow the instructions on screen)...might help...
was your phone allowed the update or have you used HSPL?

Already tried hard reset unfortunately and no help. The phone is a HTC original and was allowed the update fine.
Trying to update by SD card now, which I didn't really know about before.
Edit: And that's not working, it just sticks on the red green blue and white bar screen. Will try and download rom again from a different HTC server.
Edit 2: SD in progress now.
Edit 3: Finished successfully and phone is starting up Yay. Can probably put this down to (stupid) user error.

Related

Titan flash fail. Need recover instructions

Hi, had a problem flashing my bro in law's Titan.
I unlocked the titan with the titan unlocker by Olipro and flashed with the round 4 reloaded (loaded) rom (dcd 3.2.6)
unlocked fine, installed the rom to 100% rebooted phone and its stuck on the Bell screen. (its after the HTC screen and after the screen that shows versions, which it does show D. version 3.2.6) any ideas how to get it to where i can flash it again?
Does it have a compatible v3.x radio installed as well? I recommend 3.42.40 personally, but just about any v3.x radio will work.
BTC
Tzetsin said:
Hi, had a problem flashing my bro in law's Titan.
I unlocked the titan with the titan unlocker by Olipro and flashed with the round 4 reloaded (loaded) rom (dcd 3.2.6)
unlocked fine, installed the rom to 100% rebooted phone and its stuck on the Bell screen. (its after the HTC screen and after the screen that shows versions, which it does show D. version 3.2.6) any ideas how to get it to where i can flash it again?
Click to expand...
Click to collapse
Ok, solved the problem by pressing the power button, camera button and reset button all at the same time. This of course enabled the bootloader on the phone. installed another rom which gave me the same result, stuck at carrier screen. This is of course because i didnt know i had to upgrade the radio first. Got the phone running again by updating the rom with the one at the HTC website for my carrier.
Now i'm trying to update the radio. there isnt alot of instruction out there, but i did find this http://wiki.xda-developers.com/index.php?pagename=Radio only upgrade instructions Although after following the instructions, the universal rom upgrade tool never connects to my phone. I tried the vista fix here http://forum.xda-developers.com/showthread.php?t=313001 But being that its over 2 years old, i'm guessing its now useless as when i try to update with the files there my OS says my drivers are more current and wont allow me to install them.
So now i'm stuck at the "how to upgrade my titan's radio" stage. Anyone have better instructions? (or can tell me what i'm doing wrong?
what i've done
downloaded radio version 3.42.40 as BTC suggested
downloaded "universalRUU" and extracted it to its own folder
copied the radio's file "TITAIMG.nbh" into the UniversalRUU folder
reset my phone into the bootloader screen
ran the ROMUpgradeUt.exe from the UniversalRUU folder
pressed "next"
it says "checking information on your device" and hangs there forever.
if i press update anyway, it continues to the last screen where i can press "finish" and thats it. nothing happens. which part am i missing? the phone is DEFINATLY connected to windows at that point, so it should be able to detect it, but it doesnt seem like it even tries as there is no system pausing or stuttering like it might be trying to do something.
thanks for the help so far.
Solved the problem on my own, as well as the other couple problems i ran into.
Updated the Titan WIKI to reflect my solutions and clarify some key points.

Bricked via HSPL?

Hey all,
Just a little background information:
- Hard SPL'd my phone to flash Dutty's cooked ROM.
- All of a sudden one day, the phone switched off. I tried to boot it up but it will freeze on the HTC loading screen where it displays the radio version, ROM version in red down the bottom - the phone would not go any further.
- My computer won't even recognise it when I plug in my USB.
Anyway, I figured I'd try to uninstall HSPL and start over again. I downloaded an official HTC ROM, tried to load into the bootloader and now I'm stuck.
The screen reads:
Upgrade ROM code error
Please try again
If I pull out the battery/SD card, it will load into this screen again.
What *I THINK* may be the issue is that I didn't use the original ROM SPECIFIC to my phone, i.e. WWE Asian ROM.
I've updated the ROM image on my SD card but I can't get into the original bootloader to start the uninstallation process again.
Help!
Ok, nice and calm, are you sure you can't get into bootloader mode?
Power off, sim and sd card out (just to be sure)
hold volume down, tap power, continue to hold volume down.
samsamuel said:
Ok, nice and calm, are you sure you can't get into bootloader mode?
Power off, sim and sd card out (just to be sure)
hold volume down, tap power, continue to hold volume down.
Click to expand...
Click to collapse
I can get into the bootloader just fine.
It will display the error message and I can't do anything.
OK, so if you can get to the 3 coloured screen, you can just flash HSPL (if it isn't still installed) and flash a new rom.
Boot to bootloader(3 coloured screen), connect to computer, run HSPL.exe
samsamuel said:
OK, so if you can get to the 3 coloured screen, you can just flash HSPL (if it isn't still installed) and flash a new rom.
Boot to bootloader(3 coloured screen), connect to computer, run HSPL.exe
Click to expand...
Click to collapse
My computer refuses to connect to the phone.
I'll plug in my USB cable, windows will make the connection sound but the phone won't load into Windows Explorer.
What does it say by the spl? 1.42.0000? or 1.42.HSPL?
Actually it doesnt matter, when you hear the connection sound, thats enough, Run HSPL.exe, and if its not already installed, it should install, if it is already installed it will say 'hspl requires 1.42.000' or something.
Either way, you can then go ahead and flash a new rom.
samsamuel said:
Actually it doesnt matter, when you hear the connection sound, thats enough, Run HSPL.exe, and if its not already installed, it should install, if it is already installed it will say 'hspl requires 1.42.000' or something.
Either way, you can then go ahead and flash a new rom.
Click to expand...
Click to collapse
No, it doesn't work.
When I run HSPL.exe, it says it can't find my phone.
I already have HSPL installed with a custom ROM.
The phone is stuffed whereby I couldn't get past the HTC logo screen - it just freezes there.
I tried uninstalling HSPL thinking this would solve my problem with no luck.
The phone boots into the bootloader with an error message that I can't seem to get around.
Ah ok, so you get the error message on the 3 coloured screen? If that is the case, then spl itself is corrupt.
I thought you got the error message when the phone tried to boot, my mistake.
Next to try then is to find the original rom that came on your phone, and flash it from sd card, and hopefully it will overwrite the spl. It must be the correct rom for your provider and region, though.
If that doesn't work, then i'm afraid all I can do is wish you best of luck.
samsamuel said:
It must be the correct rom for your provider and region, though.
Click to expand...
Click to collapse
I think this is where I went wrong.
I tried uninstalling HSPL with a ROM that wasn't from my region which is why I'm getting these errors.
Surely there's a way around this?
If you can find your original rom, there is a good chance you will be fine, OR you can probably try the goldcard route, however i'm not 100% so i wouldnt go handing over cash (goldcard isn't free) until you are sure.
Do you know what rom you are looking for?
samsamuel said:
If you can find your original rom, there is a good chance you will be fine, OR you can probably try the goldcard route, however i'm not 100% so i wouldnt go handing over cash (goldcard isn't free) until you are sure.
Do you know what rom you are looking for?
Click to expand...
Click to collapse
I'm sure my phone's original rom was the WWE Asian version from Hong Kong.
I've uploaded the ROM onto my SD card but I can't get the bootloader to load it.
As stated before, I used another ROM at first and then it crashed on me.
Everytime I start the bootloader, it won't let me load the Asian ROM from scratch.
It just displays the error with no way around it.
Hmm, ok, just a couple of last thoughts then i gotta go to bed.
1 - sd card formatted fat32
2 - some people have better luck with 2gb cards than with bigger ones.
3 - Was the phone bought direct unlocked from HTC or is there a chance its provider locked? (i.e are you REALLY SURE you have the right rom)
4 - RUU_Signed.nbh coppied to sd card and renamed leoimg.nbh
Gotta go, best of luck.
ok. u are getting error in bootloader? what exacly is the error message you are getting..
Hard Reset
I had a similar problem to this and a hard reset solved the problem. Did you try a hard reset? I think its press volume up and volume down and power simultaneously.
DownloadMaster said:
I had a similar problem to this and a hard reset solved the problem. Did you try a hard reset? I think its press volume up and volume down and power simultaneously.
Click to expand...
Click to collapse
Even that won't work!
Confirmed hard reset but pressing "Volume Up", then the screen blacks out immediately and nothing happens.
When I press the "power on" button, all I see is an exclamation mark for a second then a black screen.
I think the solution is for you to try flashing to HSPL again.
1. Boot to bootloader mode by pressing Vol down key and click the Power button. You should get the tri colour screen, and the word "Serial" on the bottom.
2. Plug in the USB cable to your PC. The word "Serial" should then change to "USB".
3. Run hspl.exe as administrator.
I did the same as you previously when I tried to load the SEA 1.66 ROM on my Hong Kong English phone, and recovered it by using the above steps. I had to run HSPL 3 times before it worked. The first 2 times, it would seem to work as I'd get the "We Hacked it!" message, but when I rebooted the phone to the bootloader, it still wasn't HSPL. Only on the 3rd try, did it successfully load HSPL to the bootloader.
-edit-
You can download the original Hong Kong CSL ROM from a link in this thread.
got to say, if in doubt - goldcard it!!!
what is your spl version now? 1.42.0000 or 1.42.hspl '?
only bootloader is never a problem with hspl installed.
only bootloader is no problem with original spl version as long as you have a compatible stock rom.
\I wonder whether the phone would connect to computer properly.
After plenty of reading around, I've finally fixed the issue!
It was the easiest of all fixes - all I had to do was to download the original factory ROM the phone came with (.exe file) and run the executable with the phone plugged in via USB.
Thanks to all those who have tried to help.

HTC Hero stuck on "Hero" screen

I received the "An update is available" pop-up yesterday evening, an update of 4,37mb. After accepting the update it starts downloading and when it finished it asked if I wanted to apply the update
When doing so, the screen turned black and after a while the "Hero" screen popped up. They said it could take up to 10 minutes, but I let it run for 40 minutes without any luck..
Also when I want to go back to the factory settings, it reboots and hangs on the "Hero" screen
If I remove the battery and start it back up it works, but without the update ( so still 1.5 )
I then tried to wipe the machine by pressing the Home, Back and Power button, which worked
So I was back in the phone with a clean install, but the same issue occured
I then called HTC who asked me to perform some steps, but none of them worked and I have to add that they did not sound like they knew what they were talking about..
I asked if there was a possibility to install the 4,37 mb update manually, but that was not the case according to him and asked me if I wanted to make an appointment to have the machine reconfiggured, which means I would lose it for 5 to 10 days
If there is no other solution I guess I will do that, but I first want to see if you guys have any suggestions
I'm thinking about installing RUU_Hero_HTC_WWE_2.73.405.66_WWE_test_signed_NoDriver via HTC Sync ( found in [ROM] Official HTC Hero RUU ROM + Radio Links thread ) but I am worndering; what if this fails and I'm again stuck on the Hero screen, will it affect the current "install" ? Since I can always go back if needed now by removing the battery, I would like to keep that option ^^
Also, if I install that, will my phone still fall under the guarantee of HTC?
Thanks in advance
i have nearly the same problem..after trying to install the 2.1 update OTA i stuck in the HERO screen..hard reset won´t work..fastboot isn´t possible because of "remote : not allow".. also tried it with hboot..useless any other advices?
maybe this helps:
HERO CVT SHIP S-ON
HBOOT-1.76.0007 (HERO10000)
MICROP-010f
TOUCH PANEL-SYN0104
RADIO-6.35.06.18
Aug 4 2009
For you guys you might need the goldcard method used in my sig.
Started the Bootloader-USB and then the RUU...now installing the rom..hope this will work
well I would like to know if I will still be under the waranty (not sure if that is the correct term, i'm not english ) of HTC if I make such changes and it fails
well guys..starting fastboot and then RUU worked well for me. now having stock 1.5 rom and installing 2.1 OTA
hope this helps some people, too!
what do you mean with starting fastboot?
I downloaded the RUU ( RUU_Hero_HTC_WWE_2.73.405.66_WWE_test_signed_NoDriver.exe ) and it works if I doubleclick it, I can start installing it but I'm afraid to do so
by holding the back button and pushing the end-call button once (while still holding the back button) the fastboot menu will come up. while in fastboot menu, just start the RUU..the update will start.
but i don´t think you´ll need that, since you can boot your phone..i couldn´t, thats why i needed to do it this way
Doubleclicked the .exe
"Checking Custom ID"
"Update Fail"
And HTC Sync is saying I should look for a correct ROM Number
That doesn't look good, does it?
Luckily the phone still starts!
Going to try it with RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoD river.exe now (since that is the version I need according to htc.com )
same issue
Anyone know which RUU I should try?
Modelnumber: HTC Hero
Firmwareversion: 1.5
Smallbandversion: 63.18.55.06JU_6.35.09.26
Kernel Version: 2.6.27-8dd6deee [email protected]
Build-number: 2.73.1100.5 146733 CL#61267 release-keys
Softwareversion: 1.0.0.A6288
I am from Belgium by the way ( we had a lot of issues with the update, at least that's what I read on several websites )
mOwtant said:
by holding the back button and pushing the end-call button once (while still holding the back button) the fastboot menu will come up. while in fastboot menu, just start the RUU..the update will start.
but i don´t think you´ll need that, since you can boot your phone..i couldn´t, thats why i needed to do it this way
Click to expand...
Click to collapse
I'm in fastboot, how do I 'just start the RUU' ????
If I try hboot, it does nothing, says it can't find any files...
Help PLEASE!!
Figured it out.
Synced phone via htc sync and installed RUU_Hero_HTC_WWE_2.73.405.66_WWE_test_signed_NoDriver
did the trick!
Called HTC again.. they said I need to wait before the official RUU for Belgium gets released (since they need to remove YouTube from ours )
I just hope that won't take ages
I have quite similar problem. I have installed 2.1 official ROM from Lox, but sometimes, it stucks on HERO screen. I have to pull out battery and boot again, then it boots fine. Is that problem known?
Crexis said:
Doubleclicked the .exe
"Checking Custom ID"
"Update Fail"
And HTC Sync is saying I should look for a correct ROM Number
That doesn't look good, does it?
Luckily the phone still starts!
Going to try it with RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoD river.exe now (since that is the version I need according to htc.com )
Click to expand...
Click to collapse
You need to use the goldcard method to "trick" the phone into a different number so the 'downgrade' can be issued.

[Q] HD2 cannot turn on...

hi there, im new here and ive been searching on the forum for a long time, but i didnt see any solution for my problem... (or maybe i was blind) so when i was trying to flash back original ROM from bootloader screen through USB, it didnt show my current image version info on the screen, but it did show the image version that im going to upgrade... however, i still let it updated and it said its succeed. but when my phone going to reboot, it stuck on the "stick together" screen... btw, my phone is PB81120 SS-B3 SPL-2.08. HSPL 8G XE. hope someone can help me solve my problem... thanks first :]
Go into bootloader again and connect the device to your PC via usb (should show USB at the the bottom in bootloader) and run the Rom Update Utility again. But first make sure the ROM is compatible with TmoUS Hd2.
I would recommend flashing stock from the bootloader just to be safe.
but i was trying to install T-Mobile_HD2_MR_Software_2.13.531.1 under bootloader, and it still the same... :[
Was that what you origonally tried updating to? Or was it a custom rom you had tried?
Sent from my HTC HD2 using XDA App
that was the latest i tried to updating to, or any different kinds of version of original ROMs... before, i tried to update a custom ROM on it first, but it failed :[ actually, when i first got my phone it was unlocked, so while i was waiting to get the unlock code for it, i decided to install android on it... later on i had successfuly putting android on it, and by that time i got my unlock code too. then i typed it in and my phone just reboot and stuck on the "stick together" screen till now... so i started to look through the forum and found out that most ppl said is to reflash the ROM back to the original one first, and then everything would be alright... but i guess it didnt work on my phone D:
Have you tried a hard reset? (Hold both volume buttons while booting)
Sent from my HTC HD2 using XDA App
yeah... i tried everything :[
hi,
don't worry, your problem is resolvable. (as long as you see something on screen, you are lucky.)
1) When the stick together screen comes, do you see any numbers on left bottom after waiting for some time say 1 min.
if yes, then your problem is missing OS image only.
in this case, take out the battery. after that, keep volume down pressed all the time and insert battery again. press power button, if mobile does not start immediately. please keep volume down button pressed till the time tricolor screen does not come on. after that connect cable to computer and update normally.
2) If you don't see any number, it may mean multiple things, which all are resolvable. (most likely bootloader stuck in another mode.)
in any case, try steps in given in 1 and report back. before reporting back please install mtty on your computer as it is needed to send commands to mobile to get out of this mode.
Try this: http://forum.xda-developers.com/showthread.php?t=668347

my htc hd2 is STUCK.. HELP ME PLS

I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Before we start, you can ask him how his device has ended up like this, can't you?
boxboy said:
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
Click to expand...
Click to collapse
Sir, you have forgotten your caps locked.
boxboy said:
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
Click to expand...
Click to collapse
Because you have stock SPL, you won't be able to install any custom ROM or any stock ROM not made for your region/SN.
boxboy said:
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
Click to expand...
Click to collapse
AFAIK, task29 is, also to be considered, a custom rom so it needs HSPL to be flashed. Are you sure you have followed the steps correctly?
boxboy said:
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
Click to expand...
Click to collapse
That is not a ROM, it's a radio. You need to flash HSPL to be able to change the splash screen (NRG Screen). HSPL should go like this: SPL 2.08.HSPL .
boxboy said:
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Click to expand...
Click to collapse
Microsoft is a corporation, Windows Phone is the OS .
One more thing, to be able to flash a LEOIMG from sd, the .nbh must be a rom that is compatible with your device (It will work if you get it from htc.com using the device's serial number)
I hope this helps. And I'm sorry if I am incorrect at something.
Good luck.
------------------------------------------------------------------------------------------------------------------------------------------------
To summarize it, you need to do either one of the following:
1- Install HSPL, and do what you want.
2- Go to HTC.com, download a rom using your Serial Number, rename file to .zip, extract the .nbh file, rename to LEOIMG.NBH [Capital letters], put onto sd card and insert into phone, boot up device while holding volume down ONLY, and make sure splash is removed and you're back to the "htc" stock, then send to repair [why?].
posting teh same post in multiple sub forums is considered rude
http://forum.xda-developers.com/showthread.php?t=1440265
Yeah, HSPL is needed for flashing pretty much everything. One thing you could do would be to flash a stock ROM from your SD card (just google it I CBA to provide links and stuff) which would reset everything to factory WinMo (including SPL to SPL3.03 [assuming you flash the latest ROM 3.14]) and from here it would basically be a fresh start. Probably the safest route without HSPL
Hi.
Thank you for your replies...
Let me tell u guys if I forgot to say earlier. The mobile phone is not letting flash any of the Hspl... be q series, 2 series or 3.series... all the times it says error 0000006 and 000000010 etc... a couple out of hundreds it did let flash but then it doesn't let me flash the factory rom fom HTC.
I have succesfuly flashed the 3.03 hspl... bit still no success in flashing any roms ... it gets stuck sometimes at 99% and sometimes at 0% and sometimes it comes up with a scrambled screen and stuck
OK,
My final.outcome.
This phone let's me flash the hspl but it doesn't let me flush any roms including the original HTC factory rom.
I can also perform the task 29. Etc but still the NRG screen is still there.
I would like to know that if I flash the original Split and send it HTC, will be repairable for free? Sure? Even with the NRG.
now i think the only option available to you is jtagging the device which may permanently void the warranty !!
it had happened with me once, but somehow it got solved !
i used to randomly install clk, magldr, radios, hspl etc multiple times !
it used to get stuck while installing and then i used to remove the battery and try again !!
somehow it started ! !!
STRANGE DEVICE !!
Yeap its a real problem!!
Now , It will not let me change the hspl to spl whatsoever I do.
I would like your suggestions
I bought this brick for £50 and I can return it to get my money back. Has any used jtagging and does it 100% work?. The thing is if I do used jtagging, and if it doesn't work ,then I can,t return it!. How much does it cost and is it worth it?
jtagging will solve your problem !!
they remove the motherboard of the device and flash the os into the motherboard directly through a device named riff box !!
refer this video for more info !!
http://www.youtube.com/watch?v=zElsUERTzOU
but pls do not try this at home ! !!
just contact a local repair shop to jtag your device !!
also u can contact these guys from the video !!
good luck ! !!
boxboy said:
I have succesfuly flashed the 3.03 hspl... bit still no success in flashing any roms ... it gets stuck sometimes at 99% and sometimes at 0% and sometimes it comes up with a scrambled screen and stuck
Click to expand...
Click to collapse
Check that the micro USB connection isn't "wobbly".
I had a TMOUS HD2 and never had any issues. Then, I sold it and got a Telstra HD2 and had big issues getting ROMs installed until I realized that the connection at the phone was a little weak. I can't send any updates to WP7 via cab sender unless the phone is in a certain position to keep the connection from breaking.
boxboy said:
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Click to expand...
Click to collapse
Don't worry ... you can give the life to your phone back... it shows fail bcus u have 2.08.0000.. so it means u Sud have 2.08 v hspl.. so try flashing hspl by getting into bootloader(3 colour) by pressing volume down + power Then flash hspl.. but remember select 2.08v.. then again after flashing hold volume down + power.. bootlooder.. then flash magdlr 1.13 ... now the phone will boot into a black screen with written mangdlr.. wen the black screen magdlr screen comes then press power off for 5mintzz.. follow the guide to flash.. there is a stick thread in NAND DEVELOP... U can get the windows version back to your phone to get the warranty...
Sent from my HTC HD2 using Tapatalk
Ok ,, some good new at last ..
I have used the HSPL4 to change my 3.03hspl to 3.030000 spl...
Success, as when i go to the tri colour screen it says spl and no hint of hspl...
Bad news, is that i still cant get the rom flashing,, as it gets stuff at some point and mostly at 99%.. Have tried both ways through SD (leoimg) and through USB.
Now final question is ... When i on the phone a big logo of NRG (ENERGIZE) writtten comes up and it gets stuck there.. the phone has SPL .. so it still under warranty to return it?.. I still have all the void sticker intact.
boxboy said:
Now final question is ... When i on the phone a big logo of NRG (ENERGIZE) writtten comes up and it gets stuck there.. the phone has SPL .. so it still under warranty to return it?.. I still have all the void sticker intact.
Click to expand...
Click to collapse
did you try to flash just a splashscreen as i suggested in your other thread? (they can be flashed alone, no need for a whole rom, , just like radios)
if you can get a stock splashscreen on there you are sorted.
Maybe try to download the original Software from HTC.
With you serial number you can get the latest windows for this phone.
Flash the Software you get from HTC.
If this is working ok you can try to install any Android ROM.
Read at first this
http://forum.xda-developers.com/showthread.php?t=905841
Try to understand and follow the steps..
But if you have even no luck with original Windows soft. You will also (maybe) have a lot of probs. with Android..
Thank you guys for all your help..
I have flashed andriod on several phones some time ago and I actually forgot the right steps to follow.
But this phone is unique is not letting me finish.
After following all the right steps, i wasnt able to install a rom succesfully even after installing the HSPL... and I am also not able to install the factory rom from htc on either the hspl or spl settings.
But i now got rid of the NRG screen and I have also installed the spl 3.03.. When you on the phone, it displays software upgrade failed..
So I have now sent the mobile to HTC as it is under warranty. I will then re-flash andriod following the right steps and see what happens!
Thanks again!
My mobile came back from HTC with a week.. Looks like a brand new one!
In the letter it says the replaced IMEI, PCBA, FL BD, W/O_ REGIONAL_ID, LEO
WOW
GREAT PHONE... ITS MUCH FASTER THAN THE PREVIOUS ONE FOR SOME REASONS

Categories

Resources