Database Users

No Radio, Stuck on splash screen

Caused my curiosity, I flashed my Radio ROM with "Phoenx06_Radio_1.41_all_carriers" apache radio ROM. And now my mogul stuck on splash screen with "no radio" in the bottom. Can't boot OS.
i've tried reflash with official SPCS ROM RUU_TITAN_SPRINT_WWE_2.09.651.3_1.32.00_SPCS_NV124_new_Ship, hundreds times, It's always said succsessfull, but still stuck with no radio.
then i used titanunlocker (thanks Olipro..) http://forum.xda-developers.com/attachment.php?attachmentid=52162&d=1190835601 , i put in Bootloader mode, SPL-1.04.0000, but won't flash. Ican't connect to ActiveSync and run haret.exe because i can't boot OS.
Olipro said : "the NBH won't flash because it's not signed with HTCs key so the SPL will reject it".
When i put MTTY:
Cmd>info 0
Cmd>info 1
Cmd>info 2
HTCSSPCS_001æž7HTCE
Cmd>info 3
HTCSA¹WáÃ…8¥}ÆOÇBå%ßoô
Cmd>info 4
HTCSSPCS_001æž7HTCE
Cmd>info 5
Cmd>info 6
HTCST ÚÈÒHTCE
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: Titan, Bootloader Version : 1.04.0000
Built at: Apr 27 2007 22:16:48
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x4107B364
Main Board ID=0x3, CPLD ID=0x9
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 3 (0x3) is reversed block
BLOCK 4 (0x4) is reversed block
BLOCK 5 (0x5) is reversed block
BLOCK 6 (0x6) is reversed block
BLOCK 7 (0x7) is reversed block
BLOCK 8 (0x8) is reversed block
BLOCK 9 (0x9) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 12 (0xC) is reversed block
BLOCK 13 (0xD) is reversed block
BLOCK 14 (0xE) is reversed block
BLOCK 15 (0xF) is reversed block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x640
Partition[2], type=0x25, start=0xC80, total=0x65C0
Partition[3], type=0x4, start=0x7240, total=0x147C0
CE Total Length(with sector info) = 0x3959200
CE CheckSum Length(without sector info) = 0x3920000
this mean have'nt "device ID" and "bootloader" ??? (info 0 and info 1)
then,
Cmd>checkimage
SPL CRC checksum = 0x671B7AE0
CE CRC checksum = 0x21756FFB
ExtROM CRC checksum = 0x44176D47
no radio checksum, no radio ROM???
it's true if the problem caused no bootloader on my titan???
can we fix bootloader??? or replace it???
pdocwrite???
any suggestion?
@ Mr. Mod, apologize for my double post. Please delete one of it, feel free. Thx.

any body.....???

still stuck no radio in my device........

Let this be a lesson to anyone that wants to flash files for different devices (like apache) to the Titan! Don't do it!! that being said there are still a few things we might be able to try to get you going again, check PM.

ImCoKeMaN said:
Let this be a lesson to anyone that wants to flash files for different devices (like apache) to the Titan! Don't do it!! that being said there are still a few things we might be able to try to get you going again, check PM.
Click to expand...
Click to collapse
thx for ur attention, but i can't go in chatt link...

you havent unlocked, try the unlocker again and carefully follow its directions
your spl is 1.04.0000 should be 1.20-olipro

bricked 8525

I think I have a bricked 8525. I can go to the boot loader screen. It stops loading at the splash screen.
HERM100
IPL-1.04
HERM100 MFG
SPL-1.01
I have tried everything that I can think of.
Anyone please help
email me
[email protected]

read these:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
http://forum.xda-developers.com/showthread.php?t=286755
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Last one looks most helpful to you, read problem 4.
Cant help any more till you provide more info, what were you doing/trying to do and so on....

First I have an at&t 8525, I was trying to upgrade the radio.
I have
radio 0108
no gsm
will not boot pass the splash screen
no KILT

I did an "info 8" in mtty.exe it gave me the fallowing
USB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x18300
Partition[3], type=0x4, start=0x1B500, total=0x23B00
CE Total Length(with sector info) = 0x377A800
CE CheckSum Length(without sector info) = 0x36A0000
I dont know if this will help.
I ready to sell for parts.

I also did info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, Bootloader Version : 1.01
Built at: Apr 11 2006 18:29:22
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6

Hello all,
I'm really at a loss now.
What other information do you need from me to help sovle this issue?
I will do what ever it takes.

Can anyone tell me what this means?
USB>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCEUSB>

After a week of trying to fix, I am very frustrated. The phone is on EBay if anyone is interested. Item number: 190198814272

what happens when you "set 14 0" enter and soft reset on mtty? or "set 16 0" ? Were you upgrading the radio due to no gsm errors on the device? any other issues with the phone? camera, wifi, speakers etc worked before?

mjrader said:
Can anyone tell me what this means?
USB>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCEUSB>
Click to expand...
Click to collapse
Means your phone lost CID , after radio flash . You must try to flash a complete original carrier WM5 KITL enable rom . After that look for hermes bricked wiki PB+KITL.

USB>set 14 0
Write Nand Success
HTCST ÚÈÒHTCEUSB>
USB>set 16 0
USB>

bricked 8525 help please

bricked 8525. I can go to the boot loader screen. It stops loading at the splash screen.
HERM100
IPL-1.04
HERM100 MFG
SPL-1.01
First I have an at&t 8525, I was trying to upgrade the radio.
I have
radio 0108
no gsm
will not boot pass the splash screen
no KILT
I did an "info 8" in mtty.exe it gave me the following
USB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x18300
Partition[3], type=0x4, start=0x1B500, total=0x23B00
CE Total Length(with sector info) = 0x377A800
CE CheckSum Length(without sector info) = 0x36A0000
I also did info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, Bootloader Version : 1.01
Built at: Apr 11 2006 18:29:22
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
USB>set 14 0
Write Nand Success
HTCST ÚÈÒHTCEUSB>
USB>set 16 0
USB>
the phone i still bricked help please

Try to flash from memory card!
Also: studdy the HERMES UPGRADE PROBLEMS section in the Wiki: http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems

Junner2003 said:
Try to flash from memory card!
Also: studdy the HERMES UPGRADE PROBLEMS section in the Wiki: http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Click to expand...
Click to collapse
how it it won't boot in to the os
and flashing from the memory card did not work

Try reboot to the tri-Color Screen And flashing the stock rom from Cingular. that usually comes Shipped with a radio and ilp

EQUiLiiBRiUM said:
Try reboot to the tri-Color Screen And flashing the stock rom from Cingular. that usually comes Shipped with a radio and ilp
Click to expand...
Click to collapse
yea i tryed that and i kept get in error (264)

thats a connection .... you cna reboot your Machine , Make sure all firewalls are off and try reinstalling Again and it should Work.

EQUiLiiBRiUM said:
thats a connection .... you cna reboot your Machine , Make sure all firewalls are off and try reinstalling Again and it should Work.
Click to expand...
Click to collapse
ok will try that cuz some one told me it lost cid i tryed to flash from the sd card also and that did not work im going to reboot and try it again

bricked polaris - black screen after reset

my polaris is bricked.
i can enter tricolor screen , but nothing after that.
tried many tricks but still no solution.
1. pressing reset, screen is totally black
2. i can enter normally into tricolor screen
3. i can flash any rom i like , but everytime black screen after reset.
4. hard reset is working fine.
5. hard spl is installed
6. mtty output :
a.
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 8 (0x8) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 13 (0xD) is reversed block
BLOCK 14 (0xE) is reversed block
BLOCK 16 (0x10) is reversed block
BLOCK 17 (0x11) is reversed block
BLOCK 18 (0x12) is reversed block
BLOCK 19 (0x13) is reversed block
BLOCK 604 (0x25C) is bad block
BLOCK 1150 (0x47E) is bad block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x780
Partition[2], type=0x25, start=0xDC0, total=0xC440
Partition[3], type=0x4, start=0xD200, total=0xE0C0
CE Total Length(with sector info) = 0x6969000
CE CheckSum Length(without sector info) = 0x6900000
b. Cmd>info 9
Storage Start Addr=0x56BA0000, length:0x7090200
c. Cmd>info 0
Platform Model IDOLA10000
Platform HW Board ID:31, PVT1
d. Cmd>info 2
HTCS00000000jR*¥HTCE
e. Cmd>info 3
HTCS;²»ÀA§v³ñ‹+¬úÐx´Wš¿
f. Cmd>boot
InitDisplay: Display_Chip=1
CpldSetSystemLED2 [1],gdwLED2Status=0.
No this System Led2 Behavior [1] polaris locks...
Is there a solution or it's time for Diamond ?

i dont know if he can help you, but hit jockyw a pm

have you tried to revert back to original SPL and ROM?
(i know you are great rom cooker, but just in case you forgot something)

Did you try these?
http://forum.xda-developers.com/showpost.php?p=2003948&postcount=2
http://forum.xda-developers.com/showpost.php?p=2350974&postcount=4

I've tried any possible mtty command ...
finally i think that there is a bad block problem (many bad blocks) ....
p.s. A friend gave me a new polaris, so cooking continues ....

sorry about your loss
any advices on what not to do ?
in order not to get in the same situation.

don't let your children play with those problematic & expensive htc pdas ...

swtos said:
I've tried any possible mtty command ...
finally i think that there is a bad block problem (many bad blocks) ....
Click to expand...
Click to collapse
it could be possible to change the ROM memory?

Dead mda vario (II)

Hello,
My old mda vario (I) will die soon so I've bought a secondhand mda vario (II).
But the phone isn't working, it won't pass the windows mobile screen.
I think the person where I bought this phone from tried to flash it. (It has a splashscreen from orange)
Here's all the information I have:
M 05
S 04
B 05 D 1.23
And after a while no gsm will appear.
From the tricolor screen:
Herm100
IPL-1.01
Herm100
SPL-1.09
I've been reading a lot here but didn't test anything because I don't want to have 2 not working phones.
Is it possible to fix this one or is it already to late?
So what to do?
Thanks for reading and helping

Hopefully it's not serious (even though it does seem so). I have an 8525 with the same specs and the radio bootloader is dead, therefore it's what i call "half a brick."
Hopefully you can revive your 8525 by following the instructions posted here.

So only if I've KITL, I could repair my phone.. Let's hope i've that..

Hope so; i tried everything possible but the phone is just dead (the phone radio that is).
Hope you get it fixed.

When I connect my phone in bootloader mode to my pc I get htc usb sync.
And when I don't go to the bootloader mode it will be detected as a windows mobile based device, but activesync can't connect...
Is that a good sign?
I've also tried this
And mtty could connect and I could execute these commands:
USB> password 0000000000000000
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
But I still get the no gsm message.
I've also tried to get in the kitl mode (with the power,comm manager and the reset button i believe). But I can't get it in that mode
Any other ideas?
@ kareem9nba thx for helping

Wupper said:
When I connect my phone in bootloader mode to my pc I get htc usb sync.
And when I don't go to the bootloader mode it will be detected as a windows mobile based device, but activesync can't connect...
Is that a good sign?
I've also tried this
And mtty could connect and I could execute these commands:
USB> password 0000000000000000
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
But I still get the no gsm message.
I've also tried to get in the kitl mode (with the power,comm manager and the reset button i believe). But I can't get it in that mode
Any other ideas?
@ kareem9nba thx for helping
Click to expand...
Click to collapse
That also didn't work for me, however did you try the second method?
In mtty, type "info 2" and then enter (with no quotations) and after that "info 8" and post what you get here.

Ok, here is the output:
info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCEUSB>
USB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x3FB(1019) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x1B100
Partition[3], type=0x4, start=0x1E100, total=0x1C700
CE Total Length(with sector info) = 0x3D10800
CE CheckSum Length(without sector info) = 0x3C20000
USB>

Now try to type "task 2a" there to try and fix the block. Post your results here.

USB>task 2a
USB>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCEUSB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x3FB(1019) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x1B100
Partition[3], type=0x4, start=0x1E100, total=0x1C700
CE Total Length(with sector info) = 0x3D10800
CE CheckSum Length(without sector info) = 0x3C20000
USB>
Done that.. But nothing changed

Ok, doesn't seem to be to good Try flashing a different radio and if it freezes during the flash, you more than likely have a dead radio bootloader. Let me know what happens.

Do you know any good ones? And activesync can't connect to my device so will that work?

For the sake of this problem, try any radio (maybe a 1.58.xx.xx series). You should be able to do it if your device is connected to your PC.

With radio you mean an spl?
(I know, i'm n00b )

Would another spl help me with flashing a new rom onto it?
And if I can't get it working trough usb, is it possible trough micro sd?

kareemnba: task 2a will not help with the primary problem, at least now he certainly has no OS image anymore.

I would have a quiet word with the person who sold you the phone. It was dead from the start and you shouldn't be wasting your time trying to repair their mistake. If you check the Hermes WIKI unbrick table you will see that there really is no way to repair this unless you send it to the repair centre or somebody like Cmonex can give you a final pronouncement.

Wam7 said:
I would have a quiet word with the person who sold you the phone. It was dead from the start and you shouldn't be wasting your time trying to repair their mistake. If you check the Hermes WIKI unbrick table you will see that there really is no way to repair this unless you send it to the repair centre or somebody like Cmonex can give you a final pronouncement.
Click to expand...
Click to collapse
there is a way, though, if the radio bootloader is dead, then only the OS can be made to boot again. the radio itself is not saveable, unless jtag to it is accessible.