Caused my curiosity, I flashed my Radio ROM with "Phoenx06_Radio_1.41_all_carriers" apache radio ROM. And now my mogul stuck on splash screen with "no radio" in the bottom. Can't boot OS.
i've tried reflash with official SPCS ROM RUU_TITAN_SPRINT_WWE_2.09.651.3_1.32.00_SPCS_NV124_new_Ship, hundreds times, It's always said succsessfull, but still stuck with no radio.
then i used titanunlocker (thanks Olipro..) http://forum.xda-developers.com/attachment.php?attachmentid=52162&d=1190835601 , i put in Bootloader mode, SPL-1.04.0000, but won't flash. Ican't connect to ActiveSync and run haret.exe because i can't boot OS.
Olipro said : "the NBH won't flash because it's not signed with HTCs key so the SPL will reject it".
When i put MTTY:
Cmd>info 0
Cmd>info 1
Cmd>info 2
HTCSSPCS_001æ ž7HTCE
Cmd>info 3
HTCSA¹WáÃ…8¥}ÆOÇBå%ßoô
Cmd>info 4
HTCSSPCS_001æ ž7HTCE
Cmd>info 5
Cmd>info 6
HTCST ÚÈÒHTCE
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: Titan, Bootloader Version : 1.04.0000
Built at: Apr 27 2007 22:16:48
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x4107B364
Main Board ID=0x3, CPLD ID=0x9
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 3 (0x3) is reversed block
BLOCK 4 (0x4) is reversed block
BLOCK 5 (0x5) is reversed block
BLOCK 6 (0x6) is reversed block
BLOCK 7 (0x7) is reversed block
BLOCK 8 (0x8) is reversed block
BLOCK 9 (0x9) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 12 (0xC) is reversed block
BLOCK 13 (0xD) is reversed block
BLOCK 14 (0xE) is reversed block
BLOCK 15 (0xF) is reversed block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x640
Partition[2], type=0x25, start=0xC80, total=0x65C0
Partition[3], type=0x4, start=0x7240, total=0x147C0
CE Total Length(with sector info) = 0x3959200
CE CheckSum Length(without sector info) = 0x3920000
this mean have'nt "device ID" and "bootloader" ??? (info 0 and info 1)
then,
Cmd>checkimage
SPL CRC checksum = 0x671B7AE0
CE CRC checksum = 0x21756FFB
ExtROM CRC checksum = 0x44176D47
no radio checksum, no radio ROM???
it's true if the problem caused no bootloader on my titan???
can we fix bootloader??? or replace it???
pdocwrite???
any suggestion?
@ Mr. Mod, apologize for my double post. Please delete one of it, feel free. Thx.
any body.....???
still stuck no radio in my device........
Let this be a lesson to anyone that wants to flash files for different devices (like apache) to the Titan! Don't do it!! that being said there are still a few things we might be able to try to get you going again, check PM.
ImCoKeMaN said:
Let this be a lesson to anyone that wants to flash files for different devices (like apache) to the Titan! Don't do it!! that being said there are still a few things we might be able to try to get you going again, check PM.
Click to expand...
Click to collapse
thx for ur attention, but i can't go in chatt link...
you havent unlocked, try the unlocker again and carefully follow its directions
your spl is 1.04.0000 should be 1.20-olipro
Related
Caused my curiosity, I flashed my Radio ROM with "Phoenx06_Radio_1.41_all_carriers" apache radio ROM. And now my mogul stuck on splash screen with "no radio" in the bottom. Can't boot OS.
i've tried reflash with official SPCS ROM RUU_TITAN_SPRINT_WWE_2.09.651.3_1.32.00_SPCS_NV124_new_Ship, hundreds times, It's always said succsessfull, but still stuck with no radio.
then i used titanunlocker (thanks Olipro..) http://forum.xda-developers.com/attachment.php?attachmentid=52162&d=1190835601 , i put in Bootloader mode, SPL-1.04.0000, but won't flash. Ican't connect to ActiveSync and run haret.exe because i can't boot OS.
Olipro said : "the NBH won't flash because it's not signed with HTCs key so the SPL will reject it".
When i put MTTY:
Cmd>info 0
Cmd>info 1
Cmd>info 2
HTCSSPCS_001æ ž7HTCE
Cmd>info 3
HTCSA¹WáÃ…8¥}ÆOÇBå%ßoô
Cmd>info 4
HTCSSPCS_001æ ž7HTCE
Cmd>info 5
Cmd>info 6
HTCST ÚÈÒHTCE
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: Titan, Bootloader Version : 1.04.0000
Built at: Apr 27 2007 22:16:48
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x4107B364
Main Board ID=0x3, CPLD ID=0x9
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 3 (0x3) is reversed block
BLOCK 4 (0x4) is reversed block
BLOCK 5 (0x5) is reversed block
BLOCK 6 (0x6) is reversed block
BLOCK 7 (0x7) is reversed block
BLOCK 8 (0x8) is reversed block
BLOCK 9 (0x9) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 12 (0xC) is reversed block
BLOCK 13 (0xD) is reversed block
BLOCK 14 (0xE) is reversed block
BLOCK 15 (0xF) is reversed block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x640
Partition[2], type=0x25, start=0xC80, total=0x65C0
Partition[3], type=0x4, start=0x7240, total=0x147C0
CE Total Length(with sector info) = 0x3959200
CE CheckSum Length(without sector info) = 0x3920000
this mean have'nt "device ID" and "bootloader" ??? (info 0 and info 1)
then,
Cmd>checkimage
SPL CRC checksum = 0x671B7AE0
CE CRC checksum = 0x21756FFB
ExtROM CRC checksum = 0x44176D47
no radio checksum, no radio ROM???
it's true if the problem caused no bootloader on my titan???
can we fix bootloader??? or replace it???
pdocwrite???
any suggestion?
@ Mr. Mod, apologize for my double post. Please delete one of it, feel free. Thx.
I think I have a bricked 8525. I can go to the boot loader screen. It stops loading at the splash screen.
HERM100
IPL-1.04
HERM100 MFG
SPL-1.01
I have tried everything that I can think of.
Anyone please help
email me
[email protected]
read these:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
http://forum.xda-developers.com/showthread.php?t=286755
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Last one looks most helpful to you, read problem 4.
Cant help any more till you provide more info, what were you doing/trying to do and so on....
First I have an at&t 8525, I was trying to upgrade the radio.
I have
radio 0108
no gsm
will not boot pass the splash screen
no KILT
I did an "info 8" in mtty.exe it gave me the fallowing
USB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x18300
Partition[3], type=0x4, start=0x1B500, total=0x23B00
CE Total Length(with sector info) = 0x377A800
CE CheckSum Length(without sector info) = 0x36A0000
I dont know if this will help.
I ready to sell for parts.
I also did info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, Bootloader Version : 1.01
Built at: Apr 11 2006 18:29:22
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
Hello all,
I'm really at a loss now.
What other information do you need from me to help sovle this issue?
I will do what ever it takes.
Can anyone tell me what this means?
USB>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCEUSB>
After a week of trying to fix, I am very frustrated. The phone is on EBay if anyone is interested. Item number: 190198814272
what happens when you "set 14 0" enter and soft reset on mtty? or "set 16 0" ? Were you upgrading the radio due to no gsm errors on the device? any other issues with the phone? camera, wifi, speakers etc worked before?
mjrader said:
Can anyone tell me what this means?
USB>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCEUSB>
Click to expand...
Click to collapse
Means your phone lost CID , after radio flash . You must try to flash a complete original carrier WM5 KITL enable rom . After that look for hermes bricked wiki PB+KITL.
USB>set 14 0
Write Nand Success
HTCST ÚÈÒHTCEUSB>
USB>set 16 0
USB>
bricked 8525. I can go to the boot loader screen. It stops loading at the splash screen.
HERM100
IPL-1.04
HERM100 MFG
SPL-1.01
First I have an at&t 8525, I was trying to upgrade the radio.
I have
radio 0108
no gsm
will not boot pass the splash screen
no KILT
I did an "info 8" in mtty.exe it gave me the following
USB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x18300
Partition[3], type=0x4, start=0x1B500, total=0x23B00
CE Total Length(with sector info) = 0x377A800
CE CheckSum Length(without sector info) = 0x36A0000
I also did info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, Bootloader Version : 1.01
Built at: Apr 11 2006 18:29:22
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
USB>set 14 0
Write Nand Success
HTCST ÚÈÒHTCEUSB>
USB>set 16 0
USB>
the phone i still bricked help please
Try to flash from memory card!
Also: studdy the HERMES UPGRADE PROBLEMS section in the Wiki: http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Junner2003 said:
Try to flash from memory card!
Also: studdy the HERMES UPGRADE PROBLEMS section in the Wiki: http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Click to expand...
Click to collapse
how it it won't boot in to the os
and flashing from the memory card did not work
Try reboot to the tri-Color Screen And flashing the stock rom from Cingular. that usually comes Shipped with a radio and ilp
EQUiLiiBRiUM said:
Try reboot to the tri-Color Screen And flashing the stock rom from Cingular. that usually comes Shipped with a radio and ilp
Click to expand...
Click to collapse
yea i tryed that and i kept get in error (264)
thats a connection .... you cna reboot your Machine , Make sure all firewalls are off and try reinstalling Again and it should Work.
EQUiLiiBRiUM said:
thats a connection .... you cna reboot your Machine , Make sure all firewalls are off and try reinstalling Again and it should Work.
Click to expand...
Click to collapse
ok will try that cuz some one told me it lost cid i tryed to flash from the sd card also and that did not work im going to reboot and try it again
Hi All
Today I checked my Cruise with mtty info and the result was this:
nfo 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 8 (0xKirály is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 1023 (0x3FF) is bad block
Partition[0], type=0x20, start=0x2, total=0x3E
Partition[1], type=0x23, start=0x40, total=0x780
Partition[2], type=0x25, start=0x7C0, total=0x8680
Partition[3], type=0x4, start=0x8E40, total=0x12480
CE Total Length(with sector info) = 0x4767200
CE CheckSum Length(without sector info) = 0x4720000
I use Beps 0.54. all flash was perfect. I didin't have any error.
I worry about a little bit.
1, What does it mean this bad block exactly?
2, Should I afraid about this?
3, How can I repair this?
I got other result from "fktsndr":
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 8 (0xKirály is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x780
Partition[2], type=0x25, start=0xDC0, total=0x7580
Partition[3], type=0x4, start=0x8340, total=0x12F80
CE Total Length(with sector info) = 0x41E1A00
CE CheckSum Length(without sector info) = 0x41A0000
It looks better than my Cruise. He use Bepe 0.53.
Any idea?
Ignor this!
Is normal!
NetrunnerAT said:
Ignor this!
Is normal!
Click to expand...
Click to collapse
Pfhuuuuu ...... Ok. What is this difference between two Cruise?
One with bad block and the other without.
Here is my HTC Nike
info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 8 (0x8) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 13 (0xD) is reversed block
BLOCK 14 (0xE) is reversed block
BLOCK 16 (0x10) is reversed block
BLOCK 17 (0x11) is reversed block
BLOCK 18 (0x12) is reversed block
BLOCK 19 (0x13) is reversed block
BLOCK 817 (0x331) is bad block
BLOCK 1325 (0x52D) is bad block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x700
Partition[2], type=0x25, start=0xD40, total=0x8EC0
Partition[3], type=0x4, start=0x9C00, total=0x116C0
CE Total Length(with sector info) = 0x4E4E000
CE CheckSum Length(without sector info) = 0x4E00000
I have in my Work three other Nike with same error! All work without any problems.
DANGER!
Guys, DO NOT use "task 2a" command in MTTY with Polaris device!
Your device will be a brick.
fktsndr said:
Guys, DO NOT use "task 2a" command in MTTY with Polaris device!
Your device will be a brick.
Click to expand...
Click to collapse
Type(hex) 2A: Check NAND flash and mark bad blocks. (Requires Level!=0xFF)
Can you explane why? I think i know what you mean ^_^
[edit] i have found the Kaiser Thread ...
NetrunnerAT said:
Type(hex) 2A: Check NAND flash and mark bad blocks. (Requires Level!=0xFF)
Can you explane why? I think i know what you mean ^_^
[edit] i have found the Kaiser Thread ...
Click to expand...
Click to collapse
because in the new EVT series, the SPLs are properly written with full ECC checking, task 2a just formats the NAND entirely
Olipro said:
because in the new EVT series, the SPLs are properly written with full ECC checking, task 2a just formats the NAND entirely
Click to expand...
Click to collapse
It's clear but what do you think about the bad block in the firs post? It's normal or not?
thebiker said:
It's clear but what do you think about the bad block in the firs post? It's normal or not?
Click to expand...
Click to collapse
yes, it is normal... its a NAND device. Forget about it and be happy.
About NAND devices
http://en.wikipedia.org/wiki/Flash_memory
About bad blocks of NAND devices:
Most NAND devices are shipped from the factory with some bad blocks which are typically identified and marked according to a specified bad block marking strategy. By allowing some bad blocks, the manufacturers achieve far higher yields than would be possible if all blocks were tested good. This significantly reduces NAND flash costs and only slightly decreases the storage capacity of the parts.
Thax for all answer!!!
my polaris is bricked.
i can enter tricolor screen , but nothing after that.
tried many tricks but still no solution.
1. pressing reset, screen is totally black
2. i can enter normally into tricolor screen
3. i can flash any rom i like , but everytime black screen after reset.
4. hard reset is working fine.
5. hard spl is installed
6. mtty output :
a.
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 8 (0x8) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 13 (0xD) is reversed block
BLOCK 14 (0xE) is reversed block
BLOCK 16 (0x10) is reversed block
BLOCK 17 (0x11) is reversed block
BLOCK 18 (0x12) is reversed block
BLOCK 19 (0x13) is reversed block
BLOCK 604 (0x25C) is bad block
BLOCK 1150 (0x47E) is bad block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x780
Partition[2], type=0x25, start=0xDC0, total=0xC440
Partition[3], type=0x4, start=0xD200, total=0xE0C0
CE Total Length(with sector info) = 0x6969000
CE CheckSum Length(without sector info) = 0x6900000
b. Cmd>info 9
Storage Start Addr=0x56BA0000, length:0x7090200
c. Cmd>info 0
Platform Model IDOLA10000
Platform HW Board ID:31, PVT1
d. Cmd>info 2
HTCS00000000jR*¥HTCE
e. Cmd>info 3
HTCS;²»ÀA§v³ñ‹+¬úÐx´Wš¿
f. Cmd>boot
InitDisplay: Display_Chip=1
CpldSetSystemLED2 [1],gdwLED2Status=0.
No this System Led2 Behavior [1] polaris locks...
Is there a solution or it's time for Diamond ?
i dont know if he can help you, but hit jockyw a pm
have you tried to revert back to original SPL and ROM?
(i know you are great rom cooker, but just in case you forgot something)
Did you try these?
http://forum.xda-developers.com/showpost.php?p=2003948&postcount=2
http://forum.xda-developers.com/showpost.php?p=2350974&postcount=4
I've tried any possible mtty command ...
finally i think that there is a bad block problem (many bad blocks) ....
p.s. A friend gave me a new polaris, so cooking continues ....
sorry about your loss
any advices on what not to do ?
in order not to get in the same situation.
don't let your children play with those problematic & expensive htc pdas ...
swtos said:
I've tried any possible mtty command ...
finally i think that there is a bad block problem (many bad blocks) ....
Click to expand...
Click to collapse
it could be possible to change the ROM memory?