I am trying to upgrade or just simply change roms. I have tried and downloaded lokis and I have tried that method at least 10 times..I also tried farias method to a tee and no hope...I also went to the wiki and did that method. I get the three bars of death and an error message on the screen. I have never had problems with this I have unlockd the c and u method and I have also hard reset before and I have turned the power button off after the enablRapi...can someine please help I have read tried so many times and I am not dumb or rude I just need help
I know I am whining
I Just need some help from I fresh 8125 I have had no luck updating th rom
First the "three bars of death" is the bootloader. That is required mode for ROM Flashing.
Second, what error message do you get? Have you searched the forum for that error message?
Details, boy, the devil is in the details...
Thank You
I know its the bootloader...I am usually the one people rely on for this information...The error message is standard because when I go for the readme the .doc cant be found. I go through the process but the expected time elapsed never shows up and then I have to recovery...also I have search for various errors here and I have no luck...thank you again
error[260]
i tried it again for you and this is the error thank you
Re: error[260]
Bnetts said:
i tried it again for you and this is the error thank you
Click to expand...
Click to collapse
Two issues attributed to this "260" update Error:
First try a different cable. One user resolved their problem that way.
Others report that unsuccessful CID unlock has caused this error.
What Rom is currently on your phone?
Thank You
You are appreciated I switched position right after the last quote but you would have saved me with that post...Thank you for coming forward and know that I think you're cool :wink:
deleted....
Honestly, sounds like you never truley bricked in past attempts.
However, if Camera + Power or Home + Power won't get you anywhere now, you're pretty much boned.
Post your info in Haykuro's "Lets fix that SPL" to help him along with hopefully figuring it out.
deleted...
wddglr said:
i can boot into the spl and into recovery mode, i am thinking of using busybox wget to download the HSPL i used before to the sdcard.
if nothing seems to work, i will post in that thread.
Click to expand...
Click to collapse
I can not stress enough that if you can get into recovery mode, you are not bricked.
After flashing the radio, then the SPL, did you then try to re-flash your ROM? The SPL update will repartition your internally memory requiring you to reinstall your ROM.
deleted.......
wddglr said:
I tried pushing the ROM update.zip to the sdcard like i usually do, but i cant since it is a "read only filesystem." and trying to adb remount will give me the error give above
Click to expand...
Click to collapse
That's not totally suprising. You will need to get the ROM update.zip onto the SD card through some other means (USB reader, another G1, anyway you can).
hi ther, i hav a google fone nd i dnt no how 2 use google. cn someone please post a simple walkthrough on how 2 use this tool??? help please post here
please people just go to google and search i assure you that 99% of your problems will be solved within the first few pages, remember to use "+" between your words to ensure that all words you searched will be found, don't search entire sentences search common words that you know will be in the post
tubaking182 said:
hi ther, i hav a google fone nd i dnt no how 2 use google. cn someone please post a simple walkthrough on how 2 use this tool??? help please post here
Click to expand...
Click to collapse
This is the all new Sidekick...err...HTC Dream forum!
However, agreed.
So many of us was at this point sometimes, maybe due to knowledge is poor, maybe its just glitches, but we all make mistakes, cause we are humans. So humans wanna show you how to fix your LG G3 D855 model when you get errors like : -Secure boot error (mostly due to wrong recovery flash,as far i know, you will correct me if am wrong anyway)
- Boot verification failed.
In both scenarios you cant access recovery or download mode. Phone just reboots and screen gone black with LED blinking red and blue to the eternity. I am here to help u restore your phone to former condition.
I take no credits for this , cause i just reuploaded files, and rewriten text and everything , cause old post on has been deleted and i cant find it anywhere, but i still got the files in my PC.
Just download all the files in folder at Drive, and folow instrucions given as they are. BTW there are pictures, so u can do it wrong only if u are ...u know.
Dont hold me responsible for any damage on your device. I tryed this metod about 10 times in a row, so i am confirming that it works.
This metod dont require you to short anything, its just click-click-click, connect...you get it .
Sorry cause my grammar, but my English is little rusty since i wasnt using it in a really long time.
Good luck people!
https://drive.google.com/folderview?id=0BxSHUEybMlBTWW8wY1VJeVEzdDA&usp=sharing
KDZ file which you put in flashtool folder : http://oceanhost.eu/dsqnjfke3ueq/D85520H_00.kdz.htm
Important. What about refurbished g3, flashing wrong kdz will cause a super brick, first off all check the variant from the motherboard or just on the back of phone.
boot verification Fail !!! - Cause: MISMATC SIG LEN
I had a problem s LG g3 d850: after trying to flash rikaveri phone is not charged and does not go into the kind of rekaveri oshybki boot verification Fail !!! - Cause: MISMATC SIG LEN, after etoj inscriptions tolto indicator flashes blue krasnіm i . Help how to get back in aparata robochem state.
Tried your method does not poluchaetsa can be detailed instructions ? On the phone firmware 6.0
Guys one thing to be kept in mind.most of refurbished d855 doesn't come d855 board.so such errors arise because of wrong model of recovery flashing.so confirm your model by opening your phone and looking at the board.
milance92 said:
So many of us was at this point sometimes, maybe due to knowledge is poor, maybe its just glitches, but we all make mistakes, cause we are humans. So humans wanna show you how to fix your LG G3 D855 model when you get errors like : -Secure boot error (mostly due to wrong recovery flash,as far i know, you will correct me if am wrong anyway)
- Boot verification failed.
In both scenarios you cant access recovery or download mode. Phone just reboots and screen gone black with LED blinking red and blue to the eternity. I am here to help u restore your phone to former condition.
I take no credits for this , cause i just reuploaded files, and rewriten text and everything , cause old post on has been deleted and i cant find it anywhere, but i still got the files in my PC.
Just download all the files in folder at Drive, and folow instrucions given as they are. BTW there are pictures, so u can do it wrong only if u are ...u know.
Dont hold me responsible for any damage on your device. I tryed this metod about 10 times in a row, so i am confirming that it works.
This metod dont require you to short anything, its just click-click-click, connect...you get it .
Sorry cause my grammar, but my English is little rusty since i wasnt using it in a really long time.
Good luck people!
https://drive.google.com/folderview?id=0BxSHUEybMlBTWW8wY1VJeVEzdDA&usp=sharing
KDZ file which you put in flashtool folder : http://oceanhost.eu/dsqnjfke3ueq/D85520H_00.kdz.htm
Click to expand...
Click to collapse
PLease i have thism problem cant fix it.......i dont have com port any more on my device manager only a QHSUSB_BULK please help me
duig said:
PLease i have thism problem cant fix it.......i dont have com port any more on my device manager only a QHSUSB_BULK please help me
Click to expand...
Click to collapse
What OS do you use ? Try to disable driver signing at starting your pc . Then reinstall drivers, restart PC, then pull battery out, conect device, and then insert batery . Should work .
milance92 said:
What OS do you use ? Try to disable driver signing at starting your pc . Then reinstall drivers, restart PC, then pull battery out, conect device, and then insert batery . Should work .
Click to expand...
Click to collapse
windows 10 how do i disable driver signing ??please
duig said:
windows 10 how do i disable driver signing ??please
Click to expand...
Click to collapse
Follow this guide.your question is answered there.
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Jahanzaibawan said:
Follow this guide.your question is answered there.
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Click to expand...
Click to collapse
this method u linked require to short mobo, my method dont, its way more simple.
milance92 said:
So many of us was at this point sometimes, maybe due to knowledge is poor, maybe its just glitches, but we all make mistakes, cause we are humans. So humans wanna show you how to fix your LG G3 D855 model when you get errors like : -Secure boot error (mostly due to wrong recovery flash,as far i know, you will correct me if am wrong anyway)
- Boot verification failed.
Good luck people!
Click to expand...
Click to collapse
Thank you so much! What would I do without you
Got "Boot verification failed" when I got into the secret menu and tried to do "device test".
I got Fulmics 6 ROM installed and the device failed for some reason to load the MiniOS (used by the "device test").
Wasted about 5 hours until I got to this post.
This post was so useful I almost cried out of joy.
THANKS!!!
EDIT:
mirrored the files in dropbox:
https://www.dropbox.com/sh/vn71zlrooyxe73d/AAABVAXEfYSQPlHhOLFql51Ra
For some reason the BoardDiag available here didn't work for me. It would always says "Serial port open FAILED".
I tried with willcracker version and it worked. You can download from here: http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Just a few questions before I begin, I'm obviously... u know :
1. First, I install the drivers. In what state should the phone be in when I connect it to the PC? Probably in the only possible state, that means with the screen blank and the red and blue leds blinking, correct?
2. Do I have to remove the battery before connecting the phone?
3. Flashing the last partition, sbl1, causes the phone to reboot, right? So, in the last step when flashing the kdz, does the phone have to be in download mode?
Thanks!
FaserF said:
Thank you so much! What would I do without you
Click to expand...
Click to collapse
No problem man. I dont own G3 anymore, switched back to my beloved G Pro 2 d838 since its updated to CM 13 and CM 14.1 I gifted G3 to my GF. But i still can try something usefull and post here if i find some.
FaserF said:
Thank you so much! What would I do without you
Click to expand...
Click to collapse
Np bro.
Please help me. I have installed all drivers but my G3 D855 is not getting detected by my pc. My pc is running on Windows 7 64bit. Please help me..!
in case anyone is bothering with this in 2020+ on windows10, i did run into a few hiccups and managed to boot a 'bricked' phone I bought for 50 eur
1. Only install the approproate driver for your windows architecture of QDLoader
2. If LGFlashTool2014 is demanding mfc100.dll, you need to install a Microsoft Visual C++ 2010 Redistributable Package, yes, the x86 one: https://www.microsoft.com/en-us/download/details.aspx?id=5555
3. If after launching LGFlashTool2014 once, then closing, then launching again it doesn't turn on, you need to follow these steps: go to C:\Users\<YourWindowsUsername>\AppData\Local\Temp and delete everything you can, these are temporary files that programs on your pc store, they're not important, but LGFlashTool2014 for some reason makes some files that prevent it from launching
Since then the phone crashed a few times so I understand now how it got bricked, a faulty motherboard most likely, going to try baking it as described here: https://redd.it/5e0nx7 but this is irrelevant to the thread and just here for anyone stumbling upon in the distant dystopian future
Very informative post.
---------- Post added at 05:12 AM ---------- Previous post was at 04:53 AM ----------
very good post.
Title wrong!!!!!
solved it
Edit: @ every programm i can soemthing do with device it says waiting for device and nothing happen ): i think ive installed every driver i found, you can help me in that way ? thans alot :* wfg
Edit: cant find the folders sdk and platform tools ): why
flash again with HK 4.4.3. official software
Hard to understand what you were asking. If you could explain with more details other people can help you.
Hi everyone its not my first stuck with my zenfone 5 but here i didnt find how to do
First i tried to deal with adb iv already done that before but now my PC dont regognize my phone
Hopefully i have TWRP 3.XX installed then i flashed some rom but only one RR rom work but pico gapps wont worked ...
I try with some rom to delete the first line assert ... in binary script euhhh right and iim stuck here ...
The main probleme is taht windows dont want to let me change drivers as i want and each time my phone is booted on recovery , fastboot or anyone else mode windows says that the drivers that are actually installed are the best
Please help me to solve the prob and understand what i misted im very curious ty PS i have a 501CG sry for my english hope u ll understand
Switcherag said:
Hi everyone its not my first stuck with my zenfone 5 but here i didnt find how to do
First i tried to deal with adb iv already done that before but now my PC dont regognize my phone
Hopefully i have TWRP 3.XX installed then i flashed some rom but only one RR rom work but pico gapps wont worked ...
I try with some rom to delete the first line assert ... in binary script euhhh right and iim stuck here ...
The main probleme is taht windows dont want to let me change drivers as i want and each time my phone is booted on recovery , fastboot or anyone else mode windows says that the drivers that are actually installed are the best
Please help me to solve the prob and understand what i misted im very curious ty PS i have a 501CG sry for my english hope u ll understand
Click to expand...
Click to collapse
First : Do you have Intel Android Drv ? If not follow the link :
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
Second : I hope you have Minimal ADB and Fastboot...If not follow this link:
https://forum.xda-developers.com/showthread.php?t=2317790
Install both of them.
Y do you want to change drivers in recovery ??
However, as far as the problem with Pico Gapps is...Perform a clean wipe(System/Cache/Dalvik/Data) and then try flashing it would work.
Hope this solves your problem.
If this helps thank me, if it doesnt please inform me i'll try to provide you with more support.
DroidNoob123 said:
First : Do you have Intel Android Drv ? If not follow the link :
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
Second : I hope you have Minimal ADB and Fastboot...If not follow this link:
https://forum.xda-developers.com/showthread.php?t=2317790
Install both of them.
Y do you want to change drivers in recovery ??
However, as far as the problem with Pico Gapps is...Perform a clean wipe(System/Cache/Dalvik/Data) and then try flashing it would work.
Hope this solves your problem.
If this helps thank me, if it doesnt please inform me i'll try to provide you with more support.
Click to expand...
Click to collapse
Ty for u responding i cant do this now but i ll try normally i v already done these steps but i ll try with those tutorials