Related
Hi, i need some help. I have Lenovo Ideatab A1000-F with installed TWRP recovery, but i have one problem. If i connect turned off tablet on PC, the preloader (PreLoader USB VCOM Port) driver starts, but then after few seconds disconnects and tablet starts charging trough USB ... I want to flash something (AllegroROM) to it but when i have only 2-4 seconds its kinda bad ... I have installed all kind of drivers and trying it againg and again, but nothing works. (I think the problem is that i cant remove battery to avoid charging.. or? ) Maybe screenshot helps. Please help. Thanks.
Btw sorry for my english.
adokitkat said:
Hi, i need some help. I have Lenovo Ideatab A1000-F with installed TWRP recovery, but i have one problem. If i connect turned off tablet on PC, the preloader (PreLoader USB VCOM Port) driver starts, but then after few seconds disconnects and tablet starts charging trough USB ... I want to flash something (AllegroROM) to it but when i have only 2-4 seconds its kinda bad ... I have installed all kind of drivers and trying it againg and again, but nothing works. (I think the problem is that i cant remove battery to avoid charging.. or? ) Maybe screenshot helps. Please help. Thanks.
Btw sorry for my english.
Click to expand...
Click to collapse
Hi there. sorry i can't help you with your issue.... i was just wondering if you could perhaps post how were you able to install TWRP on your a1000l-f?
linuxhost said:
Hi there. sorry i can't help you with your issue.... i was just wondering if you could perhaps post how were you able to install TWRP on your a1000l-f?
Click to expand...
Click to collapse
I found instructions on russian lenovo forum, one user have ported it and make it flashable from pc (and thats my problem - fast disconnect, so i cant flash large files - he also did his custom rom for it, but i cant flash it for my problem) . I hope i have helped PS: you must create account on that forum to show files
adokitkat said:
I found instructions on russian lenovo forum, one user have ported it and make it flashable from pc (and thats my problem - fast disconnect, so i cant flash large files - he also did his custom rom for it, but i cant flash it for my problem) . I hope i have helped PS: you must create account on that forum to show files
Click to expand...
Click to collapse
Thank you for your reply, adokitkat.
adokitkat said:
Hi, i need some help. I have Lenovo Ideatab A1000-F with installed TWRP recovery, but i have one problem. If i connect turned off tablet on PC, the preloader (PreLoader USB VCOM Port) driver starts, but then after few seconds disconnects and tablet starts charging trough USB ... I want to flash something (AllegroROM) to it but when i have only 2-4 seconds its kinda bad ... I have installed all kind of drivers and trying it againg and again, but nothing works. (I think the problem is that i cant remove battery to avoid charging.. or? ) Maybe screenshot helps. Please help. Thanks.
Btw sorry for my english.
Click to expand...
Click to collapse
well,i can give u the original rom for this A1000F and the zip that u can install it of the TWRP without all those problems,i have them installed too and i didn't had any problems,actually i didn't went to any russian page to get them.
If anyone whant those 2 files and if the moderator will let me post the links to them,i will post them and let every1 take those 2 files
actually i will ask to developers,if they want the TWRP recovery zip for this device and look into it to see how that was done,maybe someone can actually do more,maybe make the CWM for it and maybe some new custom rooms,as i said,i have the original rom too and the TWRP recovery that can be very easy installed without all this problems
Yes pls
appollokillers1 said:
well,i can give u the original rom for this A1000F and the zip that u can install it of the TWRP without all those problems,i have them installed too and i didn't had any problems,actually i didn't went to any russian page to get them.
If anyone whant those 2 files and if the moderator will let me post the links to them,i will post them and let every1 take those 2 files
actually i will ask to developers,if they want the TWRP recovery zip for this device and look into it to see how that was done,maybe someone can actually do more,maybe make the CWM for it and maybe some new custom rooms,as i said,i have the original rom too and the TWRP recovery that can be very easy installed without all this problems
Click to expand...
Click to collapse
That will be great thanks.
adokitkat said:
That will be great thanks.
Click to expand...
Click to collapse
here is the original rom to flash
http://www*upl*me/hXNuzD
just change * with .
and for the second thing,which is the TWRP recovery,u need to get a simple free app from the google pstore called Recovery Tools and once u open it,and be4 that just pass on ur sd card this file,or on the usb internal memory the next file,just tap on the first line on the screen,in that app and load that file and executed,will finish pretty fast and don't even need to reboot,but when u get in the recovery mode,u will see the TWRP recovery mod and not the usual
download the file from here
http://www*upl*me/4MI55G
just change the * with .
If anyone can do at least a custom rom that will look different than the stock rom,i will thank him for life
appollokillers1 said:
here is the original rom to flash
http://www*upl*me/hXNuzD
just change * with .
and for the second thing,which is the TWRP recovery,u need to get a simple free app from the google pstore called Recovery Tools and once u open it,and be4 that just pass on ur sd card this file,or on the usb internal memory the next file,just tap on the first line on the screen,in that app and load that file and executed,will finish pretty fast and don't even need to reboot,but when u get in the recovery mode,u will see the TWRP recovery mod and not the usual
download the file from here
http://www*upl*me/4MI55G
just change the * with .
If anyone can do at least a custom rom that will look different than the stock rom,i will thank him for life
Click to expand...
Click to collapse
Russian guy did .. if do you want i would send you link in pm .. But its file to flash as i wrote
adokitkat said:
Russian guy did .. if do you want i would send you link in pm .. But its file to flash as i wrote
Click to expand...
Click to collapse
i know that that file is wrong,the 1 of the russian,but the 2 that i've posted the links r right,not wrong,i used them and i have no problems at all of any kind,why would i want a flash rom that will give me something foulty ? better to have something that really works and are good.
oh,i forgot to mention that for the second zip file to install it,u need to have the device rooted and u can do it easy with a program called Kingo Android Root
i've seen that russian guy tryed to do something and i am happy that some1 did,but why using something that will give u problems ?
appollokillers1 said:
i know that that file is wrong,the 1 of the russian,but the 2 that i've posted the links r right,not wrong,i used them and i have no problems at all of any kind,why would i want a flash rom that will give me something foulty ? better to have something that really works and are good.
oh,i forgot to mention that for the second zip file to install it,u need to have the device rooted and u can do it easy with a program called Kingo Android Root
i've seen that russian guy tryed to do something and i am happy that some1 did,but why using something that will give u problems ?
Click to expand...
Click to collapse
It was ok for them, i dont know why not for me .. At least it worked one time.. And i never heard of it, i was trying to use all common root programs and nothing .. I will check it out, thanks
TWRP link is down, mind passing on a new one
Elephone P9000
Hi Guys I need your help urgently please with my elephone p9000
I am stuck really , I got this phone and tried to root it using kingo and now it is stock on the booting logo , I tried to follow your guide and no success!! can you help me how to flash it using adb method for example.
so far
1- phone boots up
2- getting stuck on the company logo while loading
3- tried flashing it using SP flash tool and downloaded the stock rom and still no success.
4- can you help me on how to flash it using the adb.
would appreciate a detailed step by step for beginners
Many thanks
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
willngg said:
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
Click to expand...
Click to collapse
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
a.cid said:
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
Click to expand...
Click to collapse
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
willngg said:
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
Click to expand...
Click to collapse
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
a.cid said:
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
Click to expand...
Click to collapse
version 80 cant get gravity box to work
does not work, scatter file gives issues
maestro2702 said:
does not work, scatter file gives issues
Click to expand...
Click to collapse
try to shorten scatter file name or place in C:/
use latest version of sp flash tools
https://androidmtk.com/smart-phone-flash-tool
download rom 20160419
https://mega.nz/#!3R0zBQAY!zkdYmMcYzps7p8gzUKVBYY9jjwNLgb6mnA9OGKRDY3E
Root using this tutorial
http://bbs.elephone.hk/thread-9919-1-1.html
Detailed instructions German (not the confused instruction of elephone.hk)
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Tried it, but it did not work. tried it multiple times, it states a succes. Download OK. But when i try to start TWRP by holding vol+ and power, or vol+ and vol- and power
it just starts normally, or it gets me to the factory settings.
snoopyminou said:
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Click to expand...
Click to collapse
also tried the drivers, and stuff from this page : https://elephonemobile.eu/t/how-to-root-latest-elephone-p9000-stock-rom/34
I have : Elephone_P9000_20160628 does this have to do with it ?
and i now tried a wireless update... to 20160715 but it says, it will restart in recovery mode to do the update, but then the phone keeps hanging on the ELEPHONE logo... so i can not update the phone anymore apparently... ( so something is done to the factory settings :s but not the TWRMP )
i'm gonna try now the scatt file from my firmware build that i downloaded here : http://www.android-hilfe.de/thema/o...-p9000-p9000-lite-uebersicht-download.785193/
did not work, but now i have the original recovery back on the device, and now i can do the wireless update to 20160715 so i now have latest version of my P9000 firmware... but now... still my main question how to root it that TWRP works
Help !!! i don't use the phone untill i can install xposed framework and Xprivacy on it
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
hozumi70 said:
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
Click to expand...
Click to collapse
Flash magisk via TWRP.
Hi.
I think my problem is unusual.
I try to install TWRP and/or root my device.
I red a few instructions in german and english.
And still nothing.
Details.
1. I have the compilation: from 2016.08.10.
2. Updater says I have new soft. I can download it 100 times. It says "downloading", then "installing" and "rebooting" but in the end nothing changes: still the same rom, still I can download and install this new soft (from 2017.1.12, 927,13 MB).
3. I can open the recovery mode. This is impossible for this device. Power+UP, Power+DOWN = doesn't matter. I see something like bootloop, but after 10-20 seconds the system is rebooting normally. No recovery.
3A. I didn't find an extra settings in "Options" which give more possibilities during turning off (for example: "restart in recovery").
As You see I can't make the backup (nesessary for me) that is why I didn't try "factory reset".
4. Instructions from Internet didn't work:
a) "MT65xx USB VCOM DRIVERS" installs some drivers but I don't have "Ports (COM&LPT) for Windows 10,
b) "SP_Flash_Tool_v5.1640_Win": no scatter file, don't know how to make it, the file from Internet didn't help,
c) "SP_Flash_Tool_v5.1640_Win": I can't tick "recovery" and any other option,
d) "Mtk_Droid_Tool_v2.5.3": it doesn't show any informations about the device.
As You see I can nothing with my P9000.
Do You have any ideas?
So many of us was at this point sometimes, maybe due to knowledge is poor, maybe its just glitches, but we all make mistakes, cause we are humans. So humans wanna show you how to fix your LG G3 D855 model when you get errors like : -Secure boot error (mostly due to wrong recovery flash,as far i know, you will correct me if am wrong anyway)
- Boot verification failed.
In both scenarios you cant access recovery or download mode. Phone just reboots and screen gone black with LED blinking red and blue to the eternity. I am here to help u restore your phone to former condition.
I take no credits for this , cause i just reuploaded files, and rewriten text and everything , cause old post on has been deleted and i cant find it anywhere, but i still got the files in my PC.
Just download all the files in folder at Drive, and folow instrucions given as they are. BTW there are pictures, so u can do it wrong only if u are ...u know.
Dont hold me responsible for any damage on your device. I tryed this metod about 10 times in a row, so i am confirming that it works.
This metod dont require you to short anything, its just click-click-click, connect...you get it .
Sorry cause my grammar, but my English is little rusty since i wasnt using it in a really long time.
Good luck people!
https://drive.google.com/folderview?id=0BxSHUEybMlBTWW8wY1VJeVEzdDA&usp=sharing
KDZ file which you put in flashtool folder : http://oceanhost.eu/dsqnjfke3ueq/D85520H_00.kdz.htm
Important. What about refurbished g3, flashing wrong kdz will cause a super brick, first off all check the variant from the motherboard or just on the back of phone.
boot verification Fail !!! - Cause: MISMATC SIG LEN
I had a problem s LG g3 d850: after trying to flash rikaveri phone is not charged and does not go into the kind of rekaveri oshybki boot verification Fail !!! - Cause: MISMATC SIG LEN, after etoj inscriptions tolto indicator flashes blue krasnіm i . Help how to get back in aparata robochem state.
Tried your method does not poluchaetsa can be detailed instructions ? On the phone firmware 6.0
Guys one thing to be kept in mind.most of refurbished d855 doesn't come d855 board.so such errors arise because of wrong model of recovery flashing.so confirm your model by opening your phone and looking at the board.
milance92 said:
So many of us was at this point sometimes, maybe due to knowledge is poor, maybe its just glitches, but we all make mistakes, cause we are humans. So humans wanna show you how to fix your LG G3 D855 model when you get errors like : -Secure boot error (mostly due to wrong recovery flash,as far i know, you will correct me if am wrong anyway)
- Boot verification failed.
In both scenarios you cant access recovery or download mode. Phone just reboots and screen gone black with LED blinking red and blue to the eternity. I am here to help u restore your phone to former condition.
I take no credits for this , cause i just reuploaded files, and rewriten text and everything , cause old post on has been deleted and i cant find it anywhere, but i still got the files in my PC.
Just download all the files in folder at Drive, and folow instrucions given as they are. BTW there are pictures, so u can do it wrong only if u are ...u know.
Dont hold me responsible for any damage on your device. I tryed this metod about 10 times in a row, so i am confirming that it works.
This metod dont require you to short anything, its just click-click-click, connect...you get it .
Sorry cause my grammar, but my English is little rusty since i wasnt using it in a really long time.
Good luck people!
https://drive.google.com/folderview?id=0BxSHUEybMlBTWW8wY1VJeVEzdDA&usp=sharing
KDZ file which you put in flashtool folder : http://oceanhost.eu/dsqnjfke3ueq/D85520H_00.kdz.htm
Click to expand...
Click to collapse
PLease i have thism problem cant fix it.......i dont have com port any more on my device manager only a QHSUSB_BULK please help me
duig said:
PLease i have thism problem cant fix it.......i dont have com port any more on my device manager only a QHSUSB_BULK please help me
Click to expand...
Click to collapse
What OS do you use ? Try to disable driver signing at starting your pc . Then reinstall drivers, restart PC, then pull battery out, conect device, and then insert batery . Should work .
milance92 said:
What OS do you use ? Try to disable driver signing at starting your pc . Then reinstall drivers, restart PC, then pull battery out, conect device, and then insert batery . Should work .
Click to expand...
Click to collapse
windows 10 how do i disable driver signing ??please
duig said:
windows 10 how do i disable driver signing ??please
Click to expand...
Click to collapse
Follow this guide.your question is answered there.
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Jahanzaibawan said:
Follow this guide.your question is answered there.
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Click to expand...
Click to collapse
this method u linked require to short mobo, my method dont, its way more simple.
milance92 said:
So many of us was at this point sometimes, maybe due to knowledge is poor, maybe its just glitches, but we all make mistakes, cause we are humans. So humans wanna show you how to fix your LG G3 D855 model when you get errors like : -Secure boot error (mostly due to wrong recovery flash,as far i know, you will correct me if am wrong anyway)
- Boot verification failed.
Good luck people!
Click to expand...
Click to collapse
Thank you so much! What would I do without you
Got "Boot verification failed" when I got into the secret menu and tried to do "device test".
I got Fulmics 6 ROM installed and the device failed for some reason to load the MiniOS (used by the "device test").
Wasted about 5 hours until I got to this post.
This post was so useful I almost cried out of joy.
THANKS!!!
EDIT:
mirrored the files in dropbox:
https://www.dropbox.com/sh/vn71zlrooyxe73d/AAABVAXEfYSQPlHhOLFql51Ra
For some reason the BoardDiag available here didn't work for me. It would always says "Serial port open FAILED".
I tried with willcracker version and it worked. You can download from here: http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Just a few questions before I begin, I'm obviously... u know :
1. First, I install the drivers. In what state should the phone be in when I connect it to the PC? Probably in the only possible state, that means with the screen blank and the red and blue leds blinking, correct?
2. Do I have to remove the battery before connecting the phone?
3. Flashing the last partition, sbl1, causes the phone to reboot, right? So, in the last step when flashing the kdz, does the phone have to be in download mode?
Thanks!
FaserF said:
Thank you so much! What would I do without you
Click to expand...
Click to collapse
No problem man. I dont own G3 anymore, switched back to my beloved G Pro 2 d838 since its updated to CM 13 and CM 14.1 I gifted G3 to my GF. But i still can try something usefull and post here if i find some.
FaserF said:
Thank you so much! What would I do without you
Click to expand...
Click to collapse
Np bro.
Please help me. I have installed all drivers but my G3 D855 is not getting detected by my pc. My pc is running on Windows 7 64bit. Please help me..!
in case anyone is bothering with this in 2020+ on windows10, i did run into a few hiccups and managed to boot a 'bricked' phone I bought for 50 eur
1. Only install the approproate driver for your windows architecture of QDLoader
2. If LGFlashTool2014 is demanding mfc100.dll, you need to install a Microsoft Visual C++ 2010 Redistributable Package, yes, the x86 one: https://www.microsoft.com/en-us/download/details.aspx?id=5555
3. If after launching LGFlashTool2014 once, then closing, then launching again it doesn't turn on, you need to follow these steps: go to C:\Users\<YourWindowsUsername>\AppData\Local\Temp and delete everything you can, these are temporary files that programs on your pc store, they're not important, but LGFlashTool2014 for some reason makes some files that prevent it from launching
Since then the phone crashed a few times so I understand now how it got bricked, a faulty motherboard most likely, going to try baking it as described here: https://redd.it/5e0nx7 but this is irrelevant to the thread and just here for anyone stumbling upon in the distant dystopian future
Very informative post.
---------- Post added at 05:12 AM ---------- Previous post was at 04:53 AM ----------
very good post.
Hey,
Has anyone succes in unbricking a Meizu device with the mediatek sp flash tool?
I personally have a bricked MX5 (thanks to the A**hole who made the MX5 BT unlock topic)
nope... still cannot bypass the secure base-band chip problems... the only available method is to program the boot to load the original source code and to creat a
1 - android-info.txt
2- android-product.txt
specific for mx5.. im still experimenting this though.. so far no progress yet..
If we can get this working, hard bricked devices can get recovered with fastboot I think?
Is there a way I can help you?
killerbie said:
If we can get this working, hard bricked devices can get recovered with fastboot I think?
Is there a way I can help you?
Click to expand...
Click to collapse
yes, hardbrick can be recovered if only we can bypass the secure baseband chip.. im still learning the code to creat those 2 files that i mentioned earlier.. so far no good.. still need time to identify which code that can match the baseband chip pass code. i convert update.zip to aboot.img with android file.txt that i creat. but still the code are not match. there is 1 way to reset the baseband chip, but need usb tongled and removed emmc card to reset all.. thats hell of a way to do becoz its include hardware modifications. and also need few device that only availble in chinesse , not mention the language though.. for now lets hope for master yus to bring the miracles to us..
I've found another flash tool, it seems to be provided by meizu themselves with a chinese manual called: MultiUpgrade 4.8.5 bundled with MultiUpgrade 4.8.5
killerbie said:
I've found another flash tool, it seems to be provided by meizu themselves with a chinese manual called: MultiUpgrade 4.8.5 bundled with MultiUpgrade 4.8.5
Click to expand...
Click to collapse
have u tested it yet?
need help,
did anyone can help me to solve my problem with flashtool?i try to flash my homtom ht 20 pro using flashtool, but my flashtool can not download or detect my phone i try to instal media tek usb vcom but stil can not work,cos my win 10 said that driver not digitaly signed,so anyone have solution for my problem, it will greatfull if you give me a link to download another driver so i can start flash my homtom ht 20 pro, thanks
You can install unsigned drivers in windows by shift clicking while reseting windows. You will be prompted later on on various options of reboot. One of them is going to be to not enforce signed drivers. If you have any trouble finding this option, look it up "reboot not enforcce signed drivers". You will find what you need.
Hi everyone its not my first stuck with my zenfone 5 but here i didnt find how to do
First i tried to deal with adb iv already done that before but now my PC dont regognize my phone
Hopefully i have TWRP 3.XX installed then i flashed some rom but only one RR rom work but pico gapps wont worked ...
I try with some rom to delete the first line assert ... in binary script euhhh right and iim stuck here ...
The main probleme is taht windows dont want to let me change drivers as i want and each time my phone is booted on recovery , fastboot or anyone else mode windows says that the drivers that are actually installed are the best
Please help me to solve the prob and understand what i misted im very curious ty PS i have a 501CG sry for my english hope u ll understand
Switcherag said:
Hi everyone its not my first stuck with my zenfone 5 but here i didnt find how to do
First i tried to deal with adb iv already done that before but now my PC dont regognize my phone
Hopefully i have TWRP 3.XX installed then i flashed some rom but only one RR rom work but pico gapps wont worked ...
I try with some rom to delete the first line assert ... in binary script euhhh right and iim stuck here ...
The main probleme is taht windows dont want to let me change drivers as i want and each time my phone is booted on recovery , fastboot or anyone else mode windows says that the drivers that are actually installed are the best
Please help me to solve the prob and understand what i misted im very curious ty PS i have a 501CG sry for my english hope u ll understand
Click to expand...
Click to collapse
First : Do you have Intel Android Drv ? If not follow the link :
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
Second : I hope you have Minimal ADB and Fastboot...If not follow this link:
https://forum.xda-developers.com/showthread.php?t=2317790
Install both of them.
Y do you want to change drivers in recovery ??
However, as far as the problem with Pico Gapps is...Perform a clean wipe(System/Cache/Dalvik/Data) and then try flashing it would work.
Hope this solves your problem.
If this helps thank me, if it doesnt please inform me i'll try to provide you with more support.
DroidNoob123 said:
First : Do you have Intel Android Drv ? If not follow the link :
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
Second : I hope you have Minimal ADB and Fastboot...If not follow this link:
https://forum.xda-developers.com/showthread.php?t=2317790
Install both of them.
Y do you want to change drivers in recovery ??
However, as far as the problem with Pico Gapps is...Perform a clean wipe(System/Cache/Dalvik/Data) and then try flashing it would work.
Hope this solves your problem.
If this helps thank me, if it doesnt please inform me i'll try to provide you with more support.
Click to expand...
Click to collapse
Ty for u responding i cant do this now but i ll try normally i v already done these steps but i ll try with those tutorials