Strange 3g H And G Symbol Behavoir - HD2 General

Hello
I just updated my rom top the 1.66 WWE and have noticed some weird behavoir on the display. Where normally on 2G I would have A large G symbol on the phone when not connected and the same when connected to the net but also with a small G I now have the reverse. When on 2G the large G is still there but when connected I have a small H showing indicating HSPDA connection but without being on 3G. Also when on 3G I have a large H showing but a small G when connected to the net. It seems the symbols are mixed up. Bit of a mouthfull I know but hopefully someone will get what im trying to explain.

Related

Data Icon,

I upgraded my Cingular rom to the newer rom (cant rember the version)
now I have the Square E (Or G) that sits next to the signal strength,
before the Square E, would be square if connected, or have th Arrows next to it, and the Signal strenth would be just the antenna symbol with the bars next to it.
now the Antenna logo it replaced by th G or E, and the Square E never changes.
Registry to change back? or is this just the way it is?
AFAIK the area to the left of the signal indicator is an indication of what wireless service you have available. If you have WiFi it will show a small icon which looks like a radio tower, if you have GPRS it will show a letter G in a white squire, if you have an EDGE connection available it will have a letter E in the white square.
When you actually get connected the WiFi will get a couple of arrows showing data traffic, the GPRS & EDGE will have a an E or G added to the top of the signal strength indicator. If you are connected with Activestink then it will show the left & right data arrows.
BTW it's far to complicated for such a simple piece of info.
AFAIK the area to the left of the signal indicator is an indication of what wireless service you have available. If you have WiFi it will show a small icon which looks like a radio tower, if you have GPRS it will show a letter G in a white squire, if you have an EDGE connection available it will have a letter E in the white square.
When you actually get connected the WiFi will get a couple of arrows showing data traffic, the GPRS & EDGE will have a an E or G added to the top of the signal strength indicator. If you are connected with Activestink then it will show the left & right data arrows.
BTW it's far to complicated for such a simple piece of info.
hi armstrong, somehow that same indicator that should be E or G is now just X, do you know what is causing that? I don't get E or G now.

Switching bands/3g wizard mobile 6

Hi all. recently upgraded my vario to win mob 6 with a rom off here...XM6r5 to be exact. All runs fine except the problems i am having with the radio connection. I cannot change the band selection from auto to GSM. I think the phone thinks its 3G but i dont want that i need gprs only as the 3g signal round here is rubbish and as it is its hammering my battery life. When i try to change the band it says it cant be done right now please try later!!!?
I have manually selected O2 in the operator selection, i have the G symbol on the top bar, sometimes this becomes an E, i presume for Edge.
Anyone any ideas how i can solve this??
Thanks
the wizard can't handle 3g, so it wouldn't think its 3g.
the G is for GPRS, and the E is for Edge. this only means that connection is available, not actually connected.
So, to answer your question, you should try the autoconfig (network wizard)

3G and other Symbols

Hi i have the HD2 on 02 and when im in a 3G area my network operater changes to show 3G 02-UK but my signal bars dont change they stay the same as
(the 8th one down on the left of page 39)
the symbol to the left of the signal bars shows H with two arrows i havent seen my signal bars change to show
(5th one down on the right of page 39)
why is this?
Am i connected to 3G?
I have never seen my signal bars change like the ones on page 39/40?
http://www.o2.co.uk/deviceinfo/device-pdfs/htchd2eng.pdf
The manual is wrong.
My O2 HD2 on t-mobile shows 3G/G/H in a white box when no data connection on.
When data connection is on, you will see 3G/H/G (and possibly E [t-mobile dont have E]) with arrows, indicating data is on.
The manual suggests that the signal icon will intregrate with the data icon whereas we see it as data icon then signal icon.
What you are seeing is correct.
When it shows 3G with arrows, you are connected to 3G, H is slightly faster 3G, E is edge (slightly faster 2G) and G is GPRS 2G.
ok thats cool so when i see the H with arrows this is faster than 3G so what are the actual speeds of 3G & this H thingy? and does this mean that my HD2 is connected to a faster connection than my mates iGay 3GS
HSPDA: http://en.wikipedia.org/wiki/High-Speed_Downlink_Packet_Access
The actual speeds may vary, depending on network, tower distance, how many people connecting on that tower etc etc.
basically
GPRS=2G
EDGE=2.5G
3G=3G
H (HSDPA)=3.5G

using data connection during a call

im sure this usd to work, but recently ive noticed it doesnt. when im in a call, my data connection disconnects. normally this isnt a problem, but sometimes i will want to look something up on the internet while in a call. like i said, im sure this used to work, but now it doesnt. im on t-mobile UK with an unlimited data plan, i have a near full HSDPA signal. im running the CleanEX DsE v15 ROM with Radio 2.11.
any thoughts
should work on 3g, not on edge or gprs
don't be confused by the left hand network symbol showing an H, that's just what your network is offering. the signal bars icon must also be showing H
i have a H as the left hand icon, and a little h above the signal bars. when i start a call, the smaller h changes to a picture of a phone. if i try and use any web features it just times out. when i hang up the call, my data connection seems to have been disconnected, as it shows a T shape above the signal bars, then changes back to the H after a few seconds

[Q] How do i know if 3G is working??

How do I know if my 3G is working? (Tmobile US, HD2, WP7, Leo70, very new just flashed it) What I am basically is wondering is how can I tell if my 3G is on? I do not have a data plan on my phone, due to the fact that I am always at school so I can always be on WIFI so I have no need for it. The Wifi works perfectly I just want to know if my 3G is working bc if I look at the signal it has signal but has no letters beside it like "3G" "E" etc... any help??
THANK YOU!
If you do not have a data plan no "H" "3G" or "E" icon will show up.
An easy way to test this is if you turn off your Wi-Fi and then try to load a website, if it doesnt load, no data.
i get that but what im wondering if the fact when i was running wm6.5 i had 3g written at the top by the signal bars and now there is nothing??
If you setup the APN correctly then it will establish a data connection with T-mobile whether you have a data plan or not.. When you install WP7 rom it wont have the apn set.. you have to do that manually... Also if you turned off Data in the cellular menu it wont show E/3G/H..
Some Advice if your not using the DATA then in the Cellular Menu turn off 3G and switch to 2G like that it uses less battery compared to trying to stay connected to Tmobiles 3G
T-Mobiles main apn: epc.tmobile.com or (for the proxy) wap.voicestream.com
I've just loaded a Win Phone 7 rom onto my HTC on vodafone.
On Win6.5 I used to get G, E, 3G, 3G+ as symbols at the top of the screen.
In Win 7 my 3G toggle is on, but all I get is G or H??
Is G = 3G in this instance because the toggle is on and H = 3G+ or am I only getting slow connections (i.e. really G=gprs and H is edge)? The browser speed seems OK, but.....
planty said:
I've just loaded a Win Phone 7 rom onto my HTC on vodafone.
On Win6.5 I used to get G, E, 3G, 3G+ as symbols at the top of the screen.
In Win 7 my 3G toggle is on, but all I get is G or H??
Is G = 3G in this instance because the toggle is on and H = 3G+ or am I only getting slow connections (i.e. really G=gprs and H is edge)? The browser speed seems OK, but.....
Click to expand...
Click to collapse
If you get either G or H thats good... G is basic GSM and H is faster 3G
H is HSPDA+
G is GSM
Finally An Answer For You....
In WP7, go into Settings. Tap Cellular (your carrier in this case T-Mobile) should be displayed.
Tap the 3G Connection setting to it turns on. And you're done. If you want to see if you have 3G or whatever connection at any given moment you can lock the screen and turn it back on to see the connection status in the upper left corner.
A simpler way, is like on the WM6.5 world...tap the very top portion of the screen (where the taskbar would be in WM6.5). Your battery, time, and connections status will drop down.
Voila!
hakuchi18v said:
If you get either G or H thats good... G is basic GSM and H is faster 3G
H is HSPDA+
G is GSM
Click to expand...
Click to collapse
Sir, just fyi: "G" means GPRS on a GSM network. HSDPA is still GSM, but with higher rates. "E" menas EDGE and has lower rates compared with HSDPA but hight compared with GPRS.
When you has G means your network is slow, about 1.5Mbps, when E it's quite OK,3.5Mbps and when H or 3G your network has higher rates 7.2Mbps or +
Hope it helps
Idhor Naergon said:
Sir, just fyi: "G" means GPRS on a GSM network. HSDPA is still GSM, but with higher rates. "E" menas EDGE and has lower rates compared with HSDPA but hight compared with GPRS.
When you has G means your network is slow, about 1.5Mbps, when E it's quite OK,3.5Mbps and when H or 3G your network has higher rates 7.2Mbps or +
Hope it helps
Click to expand...
Click to collapse
oh I know.. I realized it after I posted and reread it.. but then again in most cases barebones GPRS isnt really noticed since it jumps to edge right away
Sent from my HTC HD2 using XDA App

Categories

Resources