More virtual box woes. - Hero CDMA General

Disregard this, I'm awesome.

abcdfv said:
Alright, so Linux Mint manages to detect my Hero when plugged in, however I have no r/w permissions for it. Can anyone tell me how to set r/w permission for usb hardware?
Click to expand...
Click to collapse
log in as root?

No go on that. Finally got it by just properly configuring the guest modules. Who knew they needed configured?

thedudejdog said:
log in as root?
Click to expand...
Click to collapse
For the record, it is never a good idea to run VirtualBox or any VM as root. I am assuming you mean running a Windows guest on a Linux host. If so, just remember that any damaging Windows malware could actually aquire root access on your Linux host if you run a VM as root. If not, disregard

Related

[Q] Unable to connect Fascinate to Linux Mint

Okay....I am the very definition of noob so please bear with me.
I've been trying to root my new Fascinate so I can get rid of the bloatware. My problem seems to be that I'm running Linux Mint rather than Windoze on my computer.
Does anyone out there have an easy (noob proof) way to root this phone on Linux Mint?
I'm not looking to do anything overly fancy with the phone at this point, just strip out the bloatware. Any help would be appreciated.
LowKey1969 said:
Okay....I am the very definition of noob so please bear with me.
I've been trying to root my new Fascinate so I can get rid of the bloatware. My problem seems to be that I'm running Linux Mint rather than Windoze on my computer.
Does anyone out there have an easy (noob proof) way to root this phone on Linux Mint?
I'm not looking to do anything overly fancy with the phone at this point, just strip out the bloatware. Any help would be appreciated.
Click to expand...
Click to collapse
Do you have the option for dual boot? If not, try wine. I started getting to heavy into the programing of the phone and had to load windows on a seperate partition but you could attempt wine for simple applications. The issue will arise with drivers however.
I have Wine installed, and it starts the START ROOT bat file just fine.....it just doesn't recognize my phone I'm fairly sure it's the (windoze) drivers holding up the process.
Am I just crazy, or does it seem a bit silly that an Android (Linux OS) phone cannot properly connect directly to a Mint (Linux OS) computer?
Is there any hope to get my phone rooted without begging computer time on someones Windoze system?
BTW- When I say noob, I mean noob. My eyes start to cross when I read command lines.
LowKey1969 said:
I have Wine installed, and it starts the START ROOT bat file just fine.....it just doesn't recognize my phone I'm fairly sure it's the (windoze) drivers holding up the process.
Am I just crazy, or does it seem a bit silly that an Android (Linux OS) phone cannot properly connect directly to a Mint (Linux OS) computer?
Is there any hope to get my phone rooted without begging computer time on someones Windoze system?
BTW- When I say noob, I mean noob. My eyes start to cross when I read command lines.
Click to expand...
Click to collapse
I agree lol...linux and android should go hand in hand...afteral, our robot buddy came from it lol. Did you try downloading the drivers and executing with wine?
Amd fyi, you may as will work on a dual boot. It's addicting lol.
Yeah, I tried installing the drivers with Wine. No joy.
LowKey1969 said:
Yeah, I tried installing the drivers with Wine. No joy.
Click to expand...
Click to collapse
I've seen ways to root for the droid via pushing through the terminal however with the fascinate my searches yielded nothing :/ If I were you, I'd download the files you require to your comp amd transfer to your sd and head to a friends. Sorry bud.
Nothing wrong with telling me the truth
Better I bite the bullet and take that route as opposed to banging my head against the keyboard trying to do what can't be done.
...and because it can't be said enough, my thanks to you and all the other tech guru's and geeks who help other folks out here.
Ubuntu Linux is a little different, but these instructions should still get you there. Keyword - Heimdall
http://androidforums.com/fascinate-all-things-root/236081-how-root-using-ubuntu.html
SupraLance said:
Ubuntu Linux is a little different, but these instructions should still get you there. Keyword - Heimdall
http://androidforums.com/fascinate-all-things-root/236081-how-root-using-ubuntu.html
Click to expand...
Click to collapse
Great find...where was this when I started lol
Linix Mint used to be built from Ubuntu (now its from Debian which Ubuntu is as well) so those should work.
Both Mint buntu Mint Debian are still in active development.
Sent from my SCH-I500 using XDA App
ezas said:
Both Mint buntu Mint Debian are still in active development.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Oh? Didn't know that, haven't really paid that much attention to it though.
Sent from my SCH-I500 using Tapatalk

[Q] Droid X on Mac Gingerbread Help

Ok so I have a Droid X with the OTA gingerbread installed. I want to get back and root. Is there some sort of guide for MAC in order to do this? I'm pretty noobish. I rooted my eris and just got my droid X today so hoping I can do this tonight. I don't want to have to install windows or linux or anything on my mac.
As a Mac user, I strongly recommend VirtualBox (or the virtualization software of your choosing) and an Ubuntu install. Then use sbf_flash. Works like a charm. Faster than RSDLite in Windwos and more reliable IMHO. You might be able to get sbf_flash to work with a Linux VM, but it wasn't worth the effort for me since I already had an Ubuntu VM.
As a total noob lets say. Could you give me a step by step so I don't mess this up? Also could I use a bootable linux usb drive?
I used VirtualBox and Ubuntu. I suppose you can use a bootable Linux USB drive it you'd like, but I find it easier just to have VirtualBox installed. I've got a couple of different OS images that I use sporadically.
Step 1: Install VirtualBox
Step 2: Install Ubuntu in Virtualbox
Step 3: Follow instructions here for sbf_flash and Ubuntu: http://forum.xda-developers.com/showthread.php?t=1020203
I'm sure it seems overwhelming, but honestly, it's not that hard.
I can't even get virtualbox installed without an error. Is there an alternative software?
Gingerbread doesn't have a root currently. Only real option to root the OTA is SBF to 2.2, then root that using something such as z4root (which is simply a .apk you save and install on your phone then click the "root" button in the application). Then install the team black hat version of gingerbread
Sent from my DROIDX using XDA App
If you don't have a lot to lose as tthough you just got your phone, you can boot into recovery and wipe your phone to factory settings. That's the least complex way to do it. And none of this requires any specific computer operating system.
Sent from my DROIDX using XDA App
Let's just say that's what you get for using a mac :3
djsupersoak said:
If you don't have a lot to lose as tthough you just got your phone, you can boot into recovery and wipe your phone to factory settings. That's the least complex way to do it. And none of this requires any specific computer operating system.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Really? This will work? I can just restore back to factory settings, re fill out my google account, then go from there?
Why don't people do this then, doesn't the SBF and rooting and all that stuff wipe your phone anyways?
djsupersoak said:
If you don't have a lot to lose as tthough you just got your phone, you can boot into recovery and wipe your phone to factory settings. That's the least complex way to do it. And none of this requires any specific computer operating system.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
And that will just get rid of his data an he still won't be able to root. Op you have to SBF in order to root
mdemps9190 said:
I can't even get virtualbox installed without an error. Is there an alternative software?
Click to expand...
Click to collapse
Odd, never had a problem here. What's the error? Alternatives are Parellels and VMware. You can always succumb to the pressure of Windows and use Boot Camp if you don't like the idea of using a VM. Personally, I don't like the idea of Boot Camp, but to each their own.
Jmoney47 said:
And that will just get rid of his data an he still won't be able to root. Op you have to SBF in order to root
Click to expand...
Click to collapse
Ok. I thought it would factory reset to 2.2 if that was the state he purchased the phone in.
In any case. After you get it to 2.2, root it using a one-click root such as z4root then install the TBH/p3 Gingerbread.
Sent from my DROIDX using XDA App
djsupersoak said:
Ok. I thought it would factory reset to 2.2 if that was the state he purchased the phone in.
In any case. After you get it to 2.2, root it using a one-click root such as z4root then install the TBH/p3 Gingerbread.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Factory reset is the same as wiping data in cwm
All very amusing considering there's no reason to load a linux vm; sbf_flash will run on a mac.
If SOMEONE could give me step by step instructions on how to do this sbf flash on my mac then (OR UBUNTU) then that would be helpful. Everything is vague and I'm not going to try and figure this out on my own then brick my new droid x.
openbox9 said:
As a Mac user, I strongly recommend VirtualBox (or the virtualization software of your choosing) and an Ubuntu install. Then use sbf_flash. Works like a charm. Faster than RSDLite in Windwos and more reliable IMHO. You might be able to get sbf_flash to work with a Linux VM, but it wasn't worth the effort for me since I already had an Ubuntu VM.
Click to expand...
Click to collapse
As a Mac Genius ;-) I recommend just using the Mac without any emulator. sbf_flash works flawlessly running in native Mac, Just follow the instructions for Linux by making the script executable and then running with sudo command.
mdemps9190 said:
If SOMEONE could give me step by step instructions on how to do this sbf flash on my mac then (OR UBUNTU) then that would be helpful. Everything is vague and I'm not going to try and figure this out on my own then brick my new droid x.
Click to expand...
Click to collapse
Let's see ...
go find an sbf file; these aren't normally distributed to customers, you may have to search.
download sbf_flash
open a terminal and navigate to the directory where you've downloaded the above two files.
run "chmod +x sbf_flash" to set the program as executable
run "./sbf_flash filename.sbf" using the correct filename to start the reflash process.
connect the phone and perform whatever steps are required to boot the phone into the bootloader. (usually powering on while holding a key combo)
I'll leave it to someone else to spell out each one of those steps in agonizing detail. It's the exact same regardless of linux or mac.
Worst case is your battery dies in the middle of reflashing, and you're forced to buy an external charger to recharge the battery so you can restart the reflash.
How do I navigate to the folder in terminal?
cd is the change directory command in unix/terminal. I say put everything you need on the desktop that way its easy to navigate to it. If you google the DoRoot sequence you can follow those steps to navigate to your file, something like cd yourmacusername/desktop/filename if i remember correctly and then execute the file.
Sent from my DROIDX using XDA App
dplace said:
I recommend just using the Mac without any emulator. sbf_flash works flawlessly running in native Mac, Just follow the instructions for Linux by making the script executable and then running with sudo command.
Click to expand...
Click to collapse
Good to know. I already had an Ubuntu VM configured so I never bothered trying sbf_flash in OS X. Thanks for the tip.
FWIW, a virtual machine isn't an emulator

[Q] Rooting on a Mac?

After searching a bit it seems most if not all rooting methods require the use of a Windows machine. Are there any resources for us mac users in terms of rooting the TF?
I'm not sure if there is an nvflash version for Mac. The nvidia developer's website show flashing features for Win and linux. I assume this means nvflash.
sent from my cyanogen(mod) vision
eep2378 said:
After searching a bit it seems most if not all rooting methods require the use of a Windows machine. Are there any resources for us mac users in terms of rooting the TF?
Click to expand...
Click to collapse
I've done it with Windows Seven on Parallels 6.
Be carefull to assign at the first time the asus usb to virtual machine in static way, otherwise you can loose the connection during the procedure and the software re-ask you where do you want to connect the usb...
DLuke77 said:
I've done it with Windows Seven on Parallels 6.
Be carefull to assign at the first time the asus usb to virtual machine in static way, otherwise you can loose the connection during the procedure and the software re-ask you where do you want to connect the usb...
Click to expand...
Click to collapse
I do have vmware on my Mac running win 7. Assign asus to virtual machine in static way? How would I go about that?
Sent from my GT-I9000 using XDA App
I never used VMWare...
But in parallels, with vm running, when i insert something in the usb, it prompt where the device will be seen, on the mac or on the vm.
There, there is a check box to "remind this selection" and it never ask you again pairing always taht device with vm.
Sorry, but i don't know where and if there is something like in VMWare
I think this will get you rooted on a Mac. You will need adb.
http://androidroot.mobi/asus-eee-pad-transformer-tf101-root-cwm-recovery/
eep2378 said:
After searching a bit it seems most if not all rooting methods require the use of a Windows machine. Are there any resources for us mac users in terms of rooting the TF?
Click to expand...
Click to collapse
When I rooted mine at the very beginning of June I just used this guide as a template.
Didn't need to install any extra drivers like Windows users do, I got adb from the link provided at the beginning of the guide and the followed each of the steps including downloading the rooting tools. The commands are the same but are entered slightly differently in OSX.
Example
In OSX you would type:
Code:
./adb devices
instead of Windows:
Code:
adb devices
If you've used OSX terminal before you should be fine.

TWRP for mac???

EDIT: Please delete thread, problem solved.
Does anyone have any information on installing twrp from a mac? I have adb installed, but I haven't read anywhere about how to install it using a mac.
I installed TWRP using my Mac with the official Android SDK and platform-tools for Android 2.3 and Android 4.0 installed.
Basically just followed the instructions on the RootzWiki, as recommended by one of the devs: http://rootzwiki.com/topic/12343-how-to-install-twrp-20-linux/
did you install usb drivers (even though they aren't supported by mac osx)? and did you do anything differently because you were using a mac?
thanks for the link.
adbirdie said:
did you install usb drivers (even though they aren't supported by mac osx)? and did you do anything differently because you were using a mac?
thanks for the link.
Click to expand...
Click to collapse
Sorry man, I don't remember whether or not I installed any USB drivers. If they're not supported, I imagine that I didn't.
But, I don't want to give you misleading info -- so, if you're not sure, I'd say hold off until someone who really knows what they're talking about chimes in. I'm pretty reckless when it comes to this stuff, and I'd hate for you to do something you regret on account of my mouth, ha!
sorry, another question, did the kindle automatically show up in adb with no tinkering, hate to pester you, im just planning everything before i give it a go.
also, did you plug it in while it was on with usb storage enabled?
adbirdie said:
sorry, another question, did the kindle automatically show up in adb with no tinkering, hate to pester you, im just planning everything before i give it a go.
also, did you plug it in while it was on with usb storage enabled?
Click to expand...
Click to collapse
You don't need any drivers. Adb and fastboot should both work just fine. You might need to edit the ini file though.
Did you have to edit the usb_ini file? if so, how would i go about doing it?
adbirdie said:
Did you have to edit the usb_ini file? if so, how would i go about doing it?
Click to expand...
Click to collapse
Same as on linux... I changed it, but i'm not sure i needed to.
ok, one final thing ( i promise) http://rootzwiki.com/topic/12343-how-to-install-twrp-20-linux/ is that similar to what you did?
Edit: I've ****ed up and now i'm stuck in fastboot. do you have any ideas how to fix that?

Nexus 7 - how to on linux

Hello All,
I've read that linux does not open up the file system of nexus 7 when connected? Is that right? if yes, how can one transfer files to nexus 7?
Am waiting on my device which should arrive in few days. I really dont want to go some where else to copy my files or use apps to transfer files over the air. My phone is android and linux shows me the sd card folder right away after plugging in...
Also, can you guys please point me towards howto on rooting my device while on linux? I have seen wndows has one click method which is pretty awesome. I realize we might not have one click methods in linux, am willing to do it the hardway too..just need some direction.
Any help would really be appreciated. Thanks for taking your time.
Linux mint user here if that makes any difference. Thanks
Boomboy said:
Hello All,
I've read that linux does not open up the file system of nexus 7 when connected? Is that right? if yes, how can one transfer files to nexus 7?
Am waiting on my device which should arrive in few days. I really dont want to go some where else to copy my files or use apps to transfer files over the air. My phone is android and linux shows me the sd card folder right away after plugging in...
Also, can you guys please point me towards howto on rooting my device while on linux? I have seen wndows has one click method which is pretty awesome. I realize we might not have one click methods in linux, am willing to do it the hardway too..just need some direction.
Any help would really be appreciated. Thanks for taking your time.
Linux mint user here if that makes any difference. Thanks
Click to expand...
Click to collapse
I have no problems loading the file system on my Arch System. However, I personally rooted using Windows and the One-Click. Since all it does is use adb to push files onto the system, it is 100% possible to root and unlock using Linux. Just make sure you have the Android SDK installed. Follow this guide here: http://forum.xda-developers.com/showthread.php?t=1741395 for the acutal rooting
-Twitish
twitish said:
I have no problems loading the file system on my Arch System. However, I personally rooted using Windows and the One-Click. Since all it does is use adb to push files onto the system, it is 100% possible to root and unlock using Linux. Just make sure you have the Android SDK installed. Follow this guide here: http://forum.xda-developers.com/showthread.php?t=1741395 for the acutal rooting
-Twitish
Click to expand...
Click to collapse
Thanks for taking you time out. When you say you had no problem on arch, are you saying the file explorer just showed the nexus files? were you able to just copy and paste stuff into nexus?
Thanks for the link..will go through it
Boomboy said:
Thanks for taking you time out. When you say you had no problem on arch, are you saying the file explorer just showed the nexus files? were you able to just copy and paste stuff into nexus?
Thanks for the link..will go through it
Click to expand...
Click to collapse
By "showing Nexus files" do you mean the SD card? Linux supports PTP / MTP so this won't be a problem. You won't be able to directly view any other files without some other server installed on the Nexus, such as NFS or CIFS. As already stated, if you install the Android SDK, you will be able to root the device using adb / fastboot shell commands.
I think it depends on which distribution you are using. Ubuntu doesn't have mtp support by default.
Sent from my Nexus 7 using Tapatalk 2
gbroon said:
I think it depends on which distribution you are using. Ubuntu doesn't have mtp support by default.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Easy to get it though.
Yes, i am able to mount my internal storage in Arch if that's what you are asking. As stated before, you must have MTD support in your distro. Since Mint is based on Ubuntu, you may have to do some work. Sorry, not really sure how in Ubuntu.
Sent from my Nexus 7 using xda app-developers app
twitish said:
I have no problems loading the file system on my Arch System. However, I personally rooted using Windows and the One-Click. Since all it does is use adb to push files onto the system, it is 100% possible to root and unlock using Linux. Just make sure you have the Android SDK installed. Follow this guide here: http://forum.xda-developers.com/showthread.php?t=1741395 for the acutal rooting
-Twitish
Click to expand...
Click to collapse
wmoore said:
Easy to get it though.
Click to expand...
Click to collapse
Thanks a ton buddy! Guess I gotta follow that link as am a Mint user..

Categories

Resources