Related
To all good developers out there.
I (we) need a DeviceLock Application for the Touch Diamond cause existing lock APPs are to buggy for the Diamond. One is extremly draining the battery and dont lock all hardware keys another one lock all keys but slows down the device that the incoming call is not shown.
I am searching for a simple application that locks the device after I press the power button and unlock it by a slide to right on the TouchScreen. Same if a call is incoming.
Not more!!! A simple lock without additional features. Is there a way that anyone can develop this?????
What about the standard device lock that comes with WM?
You can also activate a today plugin for it, so on your today screen you press on the lock and your device is locked and the screen light is dimmed down and after some more time shut off.
Or you press the power button, then the device is locked and the screen light is immediately shut off.
To unlock you only need to press two buttons on the screen.
To unlock you can also press the power button to turn on the device and then pull out the stylus, no need to press the screen because with these two actions the device is also unlocked.
What's wrong about the standard WM device lock?
standard WM device lock is stupid! it is very difficult to unlock device in daylight. Gray button on gray background and dim backlight... what can be worst?
If anyone know how to change colors in that screen - it would be great!
pathologo said:
What about the standard device lock that comes with WM?
You can also activate a today plugin for it, so on your today screen you press on the lock and your device is locked and the screen light is dimmed down and after some more time shut off.
Or you press the power button, then the device is locked and the screen light is immediately shut off.
To unlock you only need to press two buttons on the screen.
To unlock you can also press the power button to turn on the device and then pull out the stylus, no need to press the screen because with these two actions the device is also unlocked.
What's wrong about the standard WM device lock?
Click to expand...
Click to collapse
You now that the internal Device Lock not work if you get a call???
Alexx_B said:
it is very difficult to unlock device in daylight. Gray button on gray background and dim backlight... what can be worst?
Click to expand...
Click to collapse
That's true! I forgot that, although I encountered that myself today.
Alexx_B said:
it is very difficult to unlock device in daylight. Gray button on gray background and dim backlight... what can be worst?
Click to expand...
Click to collapse
That's true! I forgot that, although I encountered that myself today.
Atze001 said:
You now that the internal Device Lock not work if you get a call???
Click to expand...
Click to collapse
Ok, that's a point. The screen is unlocked and things could happen unintentionally.
There is a thread about this, with some idea, but I think there is no good solution yet for this issue:
http://forum.xda-developers.com/showthread.php?t=414731
try this
Hi all
have you try Throttlelocker ?
i have install on my Diamond and it run good. light version, no battery problem, skinnable........
i think can be a good compromise.
main point: Throttlelocker can totally lock the device.
problem: you need to turn device in suspend mode manually. since now i have not found a way to use it under the backlight.
ciao
I personally use S2U2, it works perfectly on the Diamond and is fairly easy to unlock. The Slide 2 Answer feature is pretty good too - stopps you accidentally answering calls.
poedgirl said:
I personally use S2U2, it works perfectly on the Diamond and is fairly easy to unlock. The Slide 2 Answer feature is pretty good too - stopps you accidentally answering calls.
Click to expand...
Click to collapse
Which version did you use? I tested the 3 last versions and have extrem battery drain and the "home"-key is not locked.
giangishanghai said:
Hi all
have you try Throttlelocker ?
i have install on my Diamond and it run good. light version, no battery problem, skinnable........
i think can be a good compromise.
main point: Throttlelocker can totally lock the device.
problem: you need to turn device in suspend mode manually. since now i have not found a way to use it under the backlight.
ciao
Click to expand...
Click to collapse
Did throttlelocker lock the phone on incoming calls?
Atze001 said:
Did throttlelocker lock the phone on incoming calls?
Click to expand...
Click to collapse
when a call is coming you ll see the wm incoming call screen, if you dont reply phone turn to lock.
ciao
Atze001 said:
Which version did you use? I tested the 3 last versions and have extrem battery drain and the "home"-key is not locked.
Click to expand...
Click to collapse
infact on Diamond S2U2 dont lock the home button, and battery slow down very very fast, expecially last version.
with S2U2 battery life is less than one day (medium device usage)
with Throttlelocker battery life is more than 2 days (medium usage too)
due to the fact that diamond have little (big!) batteryproblem, for me better to use Throttlelocker.
ciao
here is mine........
giangishanghai said:
when a call is coming you ll see the wm incoming call screen, if you dont reply phone turn to lock.
ciao
Click to expand...
Click to collapse
And that is the problem. At work I carry my phone in my pocket and if I get a call and dont recognize them my phone answer the call. That is the reason I want a lock software that locks on calls although.
Atze001 said:
And that is the problem. At work I carry my phone in my pocket and if I get a call and dont recognize them my phone answer the call. That is the reason I want a lock software that locks on calls although.
Click to expand...
Click to collapse
maybe i have not got your meaning.........what means "my phone answer the call" ?
by the way i have not this problem.
hope you can solve yours!!!!!!
ciao
I use this which I think is simply put the best autolock for windows mobile. Customizable actions, my advice, keep it simple.
http://forum.xda-developers.com/showthread.php?t=386451&highlight=autolock
giangishanghai said:
maybe i have not got your meaning.........what means "my phone answer the call" ?
by the way i have not this problem.
hope you can solve yours!!!!!!
ciao
Click to expand...
Click to collapse
I mean if my phone is in my pants pocket and I got an incoming call and dont notice that. Then it often happend that I touch the phone or if I pull it out of the pocket I touch on the red button.
zmob123 said:
I use this which I think is simply put the best autolock for windows mobile. Customizable actions, my advice, keep it simple.
http://forum.xda-developers.com/showthread.php?t=386451&highlight=autolock
Click to expand...
Click to collapse
I know this but it doesn´t run without errors on Touch Diamond. See my post in this thread.
[APP] SensorLock
Hi Atze001,
try to have a look at Sensor lock, (Themes, Applications and Software , http://forum.xda-developers.com/showthread.php?t=422871).
maybe this app. can solve your problem.
ciao
I haven't noticed any battery problems when using S2U2 on my diamond. Every time I put my phone down, i invoke S2U2 (I have it mapped to the long press call button - never automatically, maybe this has something to do with it).
I can normally go about 3-4 days on a single charge while S2U2 is running when I'm not using it.
The version I'm using is 1.18, but I'm going to update it soon.
I had this working before i hardreset my phone to update the rom, but now i cant remember what "fix" to use for this...
It locked my phone when i turned it face down, and i really really loved that function...
Some good samaritan outthere wanna help me remember what app that was?
//cosmodk
Gsen or Gyrator can do what you want, I personally think Gyrator is better
I use gsen to turn off the screen when face down, whilst this doesn't lock the device I then sensor lock to lock the panel when the phone awakes. This means that I can quickly turn the screen off but the beauty is that when the phone awakes either by switching it back on or if I recieve a call the panel locks so I don't accidentally ignore or accept a call whilst the phone is in my pocket.
Works great for me.
Steve
So, I have PocketShield installed and it's set to slide or light unlock and answer. Quite often when I get a call it takes so long to unlock and answer, the person is gone...
There are maybe a few options -
1) I've installed and uninstalled so much stuff, maybe I need to start fresh? I have noticed the HD is a little 'laggy' now. Should I hard reset and install things back on slowely, testing it's responsiveness as I go?
2) Maybe I should switch to S2U2? I used this for a long time on my Kaiser, but have been concerned by everyone saying it drains battery power.
3) Do I need a screen lock program? The device only wakes up on a phone call and now you have a slide to answer/ignore anyway. Do the hardware keys do anything at this point? Am I safe to carry it round in my case without a screen lock?
Does anyone else suffer from this, or just me?
Thanks for any help/advice in advance.
Having the same issue. Sometimes my slide option simply doesn't work first few attempts. My solution is to use the "answer call" key beneath the main screen until this gets resolved.
S2U2 works like a charm on the HD and it doesn't draw additional battery as far as I have seen over the past few days.
When u have a call, u don't need to slide so you unlock the device then accept/reject the call.
Depends on what you have set, you can either have the original accepting/rejecting HTC screen poping up to take/reject your calls,
or you can set it so u have a new slider appearing on the wallpaper of S2U2 to accept/reject the calls
Try it, you won't regret it guys.
Well, yesterday I hard reset my HD and installed just the stuff I wanted. I've gone back to S2U2 and everything seems much much better so far. The only annoying thing is sometimes the phone wakes in landscape mode still, even though it's set to not rotate in Gyrator (and doesn't when it's woken, it stays in whatever it is in.)
Whats the difference between S2U2 and the phones default slide to answer phone ?
In other words, why install S2U2?
Its a very well presented Screen Lock, that's why. The question is just how to go from that to answering a call...
Id I have S2U2 installed, and a call comes in on my HD, what happens? does s2u2 take over from the default "slide to answer" system?
Yes it does. I think the problem I had was it wasn't doing that properly before hand. They were obviously conflicting with each other and I was struggling to answer calls.
gt112 said:
Whats the difference between S2U2 and the phones default slide to answer phone ?
In other words, why install S2U2?
Click to expand...
Click to collapse
Well S2U2 will lock your phone screen and buttons so you do not start by mistake an application or a phone call when the device is in your pocket.
Even if by mistake u click on the power on button, ur device is still locked until u unlock it using a slider like on the i-phone.
It allows u to display a wallpaper of your choice, different then the one on your today screen or in TF3D. It allows u to display clock date, network signal, tasks, missed calls, SMS, etc ...
Try it, it's free and very nicely designed
I tried to use S2U2 and found that just like every other locker it is behaving wrongly after a call - it leaves the device unlocked! So if I listen to music and get a phone call I'll have to pull it out of the pocket to lock again. There is a silly option to lock after each call of course, but this is just stupid - I just want the device to stay locked until I unlock it - how difficult is this?
Funnily, the only locker behaving properly is the stock Windows one, but it has a backlight bug and switches the device to Home screen.
It's just amazing how nobody can do such a basic function right.
vangrieg said:
I tried to use S2U2 and found that just like every other locker it is behaving wrongly after a call - it leaves the device unlocked! So if I listen to music and get a phone call I'll have to pull it out of the pocket to lock again. There is a silly option to lock after each call of course, but this is just stupid - I just want the device to stay locked until I unlock it - how difficult is this?
Funnily, the only locker behaving properly is the stock Windows one, but it has a backlight bug and switches the device to Home screen.
It's just amazing how nobody can do such a basic function right.
Click to expand...
Click to collapse
Just tried it few seconds before posting, called myself from the office phone, answered the call using the slider is S2U2, the screen turned off, I ended the call by pressing on the end call button on my HTC touch HD, and the S2U2 screen lock was there, the device was still locked.
It works perfectly with the touch HD.
Hi, my typical procedure before putting the phone in the pocket is to hold right soft button to lock the screen and to switch off the screen with the power button. I wonder if there is a way to do it at once. You press the power button and screen goes off locked?
Thanks.s.
Install AutolockScreen 1.7 (I'm at work so don't have the cab with me, but if you search this site you'll find it. Install the cab and then go to Start\Settings\System\SmartLock and tick Suspend lock.
LockDevice works well...
http://www.1800pocketpc.com/2009/09...k-the-windows-mobile-screen-after-wakeup.html
Do either of these lock screen apps consume a lot of power?
I understand they have also been created with power saving feaures but what do they run like in a coarse of a day for instance, do they drain the battery quickly?
Thanks.
HD Tweak also has option for autolock when device turned off
Fallen Spartan said:
HD Tweak also has option for autolock when device turned off
Click to expand...
Click to collapse
It does but it has a problem with the background light not undimming after locking.
Doesn't the phone automatically lock itself when you turn off the screen? Mine seems like it always does.
rpimps said:
Doesn't the phone automatically lock itself when you turn off the screen? Mine seems like it always does.
Click to expand...
Click to collapse
Mine doesn't do that unfortunately. I am using the app suggested above by ClydeB1 and its working great, not much battery drain either.
Regards.
ClydeB1 said:
It does but it has a problem with the background light not undimming after locking.
Click to expand...
Click to collapse
My phone is set to quite dim anyway in Power settings so this doesn't affect me.......hence why I forgot about it
I've attached the cab which ClydeB1 was talking about, i.e. SmartLock 1.7
Mastoid said:
Mine doesn't do that unfortunately. I am using the app suggested above by ClydeB1 and its working great, not much battery drain either.
Regards.
Click to expand...
Click to collapse
What happens if you just turn the screen off with the power button? Does touching send/back/etc turn it back on?
rpimps said:
What happens if you just turn the screen off with the power button? Does touching send/back/etc turn it back on?
Click to expand...
Click to collapse
On my device, no. If you turn screen off, only way to turn it on again is with the power button (unless someone rings etc)
rpimps said:
What happens if you just turn the screen off with the power button? Does touching send/back/etc turn it back on?
Click to expand...
Click to collapse
Fallen Spartan said:
On my device, no. If you turn screen off, only way to turn it on again is with the power button (unless someone rings etc)
Click to expand...
Click to collapse
Yes, if you just press the power button the screen goes off but it is not locked and although touching the buttons does not turn it back on, if an sms comes in and wakes the device the buttons are then active and could be accidentally touched whilst in your pocket. With the screen locked this does not happen and you need to first unlock the screen to access the sms or the device in general.
ClydeB1 said:
Yes, if you just press the power button the screen goes off but it is not locked and although touching the buttons does not turn it back on, if an sms comes in and wakes the device the buttons are then active and could be accidentally touched whilst in your pocket. With the screen locked this does not happen and you need to first unlock the screen to access the sms or the device in general.
Click to expand...
Click to collapse
True, yes, but I use Smartlock 1.7 so phone does lock
Fallen Spartan said:
True, yes, but I use Smartlock 1.7 so phone does lock
Click to expand...
Click to collapse
Was using your answer and expanding on it for explaining to rpimps
ClydeB1 said:
Yes, if you just press the power button the screen goes off but it is not locked and although touching the buttons does not turn it back on, if an sms comes in and wakes the device the buttons are then active and could be accidentally touched whilst in your pocket. With the screen locked this does not happen and you need to first unlock the screen to access the sms or the device in general.
Click to expand...
Click to collapse
Oh ok thanks for the info. Mine does unlock when I get a call/sms but I text a lot so I prefer it to do that, otherwise I'd be wasting a lot of time unlocking it every time I got a message.
Thanks for the hint ClydeB1 and thanks for the cab Fallen Spartan.
I tried SL 1.7 and there are three things, which I do not really like.
1. The phone returns to the very same screen where it was switched off. Some may consider it a pre. I prefer to see the clock when I switch it on.
2. The screen blink once when the phone is switchd on. I find it a bit irritating.
3. I do not see how I can uninstall it.
So, I wonder if you can undim the screen in HD Tweak by touching it or you need to do something extra?
You uninstall it as with any other cab. It's called Chobit Company Smartlock on the list of apps.
If you do use the hd tweak edit, you'll need to push the power button twice I think (it's been a long time since I used it I've forgotten), the first time to activate the screen (you'll see the screen but the backlight will not light up properly) then again to undim and then you can unlock the screen. I think that's the sequence, you'll need to play a little.
ClydeB1 said:
You uninstall it as with any other cab. It's called Chobit Company Smartlock on the list of apps.
If you do use the hd tweak edit, you'll need to push the power button twice I think (it's been a long time since I used it I've forgotten), the first time to activate the screen (you'll see the screen but the backlight will not light up properly) then again to undim and then you can unlock the screen. I think that's the sequence, you'll need to play a little.
Click to expand...
Click to collapse
The way I had activated the lock was by pressing and keeping pressure on the end call softkey, after a few seconds it vibrates and activates the lock. It comes on automatically when you put the screen off or restart the phone.
Regards.
Auto-lock screen
I'm running CLEAN ROM (B version) with SPB Mobile Shell.
Considering I don't want any superficial apps installed on my HD, I used HD Tweak and turned autolock on.
To get over the "background light not undimming after locking" problem, I initially unchecked "Automatically adjust backlight" under Settings > System > Power > Backlight and set at 100%. I also set the "Dim backlight on Device" when on battery power to the same time as "Turn off device if not used for". In my case that was 1 minute. I tested and this worked fine.
I then went back in and checked the "Automatically adjust backlight" checkbox.
I also performed the wake up with volume button reg edit making it easier to wake up device.
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"DefaultKeyLock"= 0
UPDATE:
Just tested again and I realised if you wake up device but don't unlock. The screen will automatically dim. Unfortunately if you unlock immediately after, the dim screen issue rears it's ugly head again. The only workaround at this point is to completely disable dim backlight.
Every time I turn the screen off, the phone vibrates 2 times with about 5 seconds delay. I have tracked this vibration down to fingerprint scanner. Its seems to be an indication of it going to sleep. When you turn the screen off, you can place your finger on the scanner and it will wake the screen up. This function is active for few seconds, and then the scanner goes to sleep (signalized by the vibration).
Anyone know how to turn this notification off? Or even better, how to disable this whole function entirely so the scanner sleeps immediately after screen goes off?
Additional information
the Vibration occurs even if you turn the screen on after turning it off but before the vibration (seems irregular though)
the time of the vibration changes with the lock time setting
turning off notification vibrations entirely helps, but I dont want to do that
not using the fingerprint unlock helps too, but I would prefer to keep using it
KowboyBebop said:
Every time I turn the screen off, the phone vibrates 2 times with about 5 seconds delay. I have tracked this vibration down to fingerprint scanner. Its seems to be an indication of it going to sleep. When you turn the screen off, you can place your finger on the scanner and it will wake the screen up. This function is active for few seconds, and then the scanner goes to sleep (signalized by the vibration).
Anyone know how to turn this notification off? Or even better, how to disable this whole function entirely so the scanner sleeps immediately after screen goes off?
Additional information
the Vibration occurs even if you turn the screen on after turning it off but before the vibration (seems irregular though)
the time of the vibration changes with the lock time setting
turning off notification vibrations entirely helps, but I dont want to do that
not using the fingerprint unlock helps too, but I would prefer to keep using it
Click to expand...
Click to collapse
Hey. My g928c is runnin on custom rom/kernel. Not sure that could be the same or not but when I turn off the screen, it doesnt wake without pressing home or power button. Maybe you use easyHome app or kind of app which uses fingerprint sensor. My device doesnt wake up after turned the screen off and placing a finger on the scanner or etc. As I remember, easyHome app has got that wake up option but in one of older versions. I hope you solve it..
Oh, I was sure this behavior was caused by the sensor, but now that I actually switched back default locker, it doesnt do it. So the issue is entirely in the Hi Locker I am using. I should have checked that in the first place. So thank you. Now my question changes. Are there any more locker options that use fingerprint scanners other than the default and hi locker?
KowboyBebop said:
Oh, I was sure this behavior was caused by the sensor, but now that I actually switched back default locker, it doesnt do it. So the issue is entirely in the Hi Locker I am using. I should have checked that in the first place. So thank you. Now my question changes. Are there any more locker options that use fingerprint scanners other than the default and hi locker?
Click to expand...
Click to collapse
Glad to know you solved it. Im using default lockscreen and never wondered any others lol. Maybe you try{if didnt} Go launcher's go locker etc. Dont know anything more in this case sorry, good luck.
I tried few other alternatives and honestly they were way too cumbersome and bloated. For now I revoked Hi Locker's permission to make notifications, which got rid of the vibration. I hope nothing broke with this modification. Thanks for getting me on track.