Related
Hello, I have some problems with my mob.phone HTC HD2: after using Flash mobile stop working, then I tried install windows and tried turn on first time and my phone shows white screan with name HTC and don`t work at all,then i tried reset and Hard reset all setings and turn on again and than screan appears again with name HTC.
When i conect my phone to pc by usb, so my pc can`t find that phone.
Can you help me with this problem.
Thank you.
you should get your stock rom, ONLY your stock rom, extract the file ruu_signed.nbh
copy that file to your sd card formatted to fat 32 rename the file to leoimg.nbh
phone off
hold volume down
tap power (keep volume held)
phone should boot to three colors screen and start to flash.
this will ONLY work with original rom.
Thanks for Help.
Same problem......
I am also stuck in the white HTC screen, (R 2.06.51.07 G 15.30.50.07U D 1.66.76641). I can flash from SD card and so i tried, using the image in the latest official RRU, no way, it doesn't fix the problem.
I didnt try any unofficial rom, i just updated to the latest rom from HTC, it worked fine. The problem occurs after i had to restart the phone while trying to connect to a xifi AP...
Any idea what i should try now ?
Thanks. You saved my day.
samsamuel said:
you should get your stock rom, ONLY your stock rom, extract the file ruu_signed.nbh
copy that file to your sd card formatted to fat 32 rename the file to leoimg.nbh
phone off
hold volume down
tap power (keep volume held)
phone should boot to three colors screen and start to flash.
this will ONLY work with original rom.
Click to expand...
Click to collapse
OMG! Thank you so much! I love you!!!!!! I was stuck on boot because my flash failed and i followed your instructions and now i can flash again!!! i was so worried and if it weren't for you i would be screwed. Really you are a HUGE help! Keep the good work up
how long did you guys have to wait till the htc rebooted after that flash? cause ive been waiting for over 30 minutes and i thought i made that wrong.
Note: ive used HSPL fist, then flashed it with energyleo.23547, but energyleo kept stuck in bootloader
now im pretty afraid of loosing manufactors warranty ...
well lads, pay attention: ive fixed that my problem all by myself. HINT: ive kept holding the buttons for to long, so the device got stock while starting up. so dont press the voldown-button for too long, maybe only for 2 seconds!
hard reset
Remember boys and girls - if you get stuck on the bootloader you can also do the following:
1. Remove the battery to turn the phone off, leave 3 seconds
2. Replace battery and hold down the vol down button and turn on your device to get into the bootloader
3. It should say 'serial'. Plug your USB cable in and it'll change to 'USB'
4. Flash your stock ROM as normal using ActiveSync method. This will also reinstall the SPL (in the case of people who can't get past the first white HTC screen). I did this after the first (and only) time I tried to do it the SD card method. Put my stock SPL back on my phone
EddyOS said:
4. Flash your stock ROM as normal using ActiveSync method. This will also reinstall the SPL (in the case of people who can't get past the first white HTC screen). I did this after the first (and only) time I tried to do it the SD card method. Put my stock SPL back on my phone
Click to expand...
Click to collapse
im pretty sure that flashing over usb won't do the spl. only sd card flashing can touch the spl.
When I tried to flash (after installing HSPL) using the sd card method and it bricked I went into the bootloader and it put my stock SPL back on - hence why I said if the sd card fails
EddyOS said:
When I tried to flash (after installing HSPL) using the sd card method and it bricked I went into the bootloader and it put my stock SPL back on - hence why I said if the sd card fails
Click to expand...
Click to collapse
I'd be inclined to suspect that In your case the spl was flashed during the failed sd card flash, so was already stock spl when you then flashed the stock rom over usb.(which of course being stock doesn't need hspl )
Hi Guys
I'm having the same problem, however, I bought the phone second hand. My question is how do I find out what my stock ROM is?
cheers
buddyrich_1 said:
Hi Guys
I'm having the same problem, however, I bought the phone second hand. My question is how do I find out what my stock ROM is?
cheers
Click to expand...
Click to collapse
you download HSPL, run it, and if your spl is anything else than 1.42 it will give out an error and no harm is done
Hey
Thanks for replying. Do I get the stock ROM from the HTC website, is there a way to get it as a .nbh file as I am currently on a mac.
thanks
Tokolosh said:
you download HSPL, run it, and if your spl is anything else than 1.42 it will give out an error and no harm is done
Click to expand...
Click to collapse
White Screen and HTC logo
I have found a similar problem, I flashed the HSPL rom following the instructions to the letter in the NOOB section.
Restarted my HTC HD2 having hard reset, and it would start and begin the installation and setup, once the setup completes, the software requests a soft reset, at this point my phone hangs on the white boot up screen with the HTC logo.
What am I doing wrong?
Stuck on White HTC Screen after ROM update
Why is it that, having run the HSPL update on my HD2 and checked that its successful, does my phone hang on the white HTC boot screen when it reboots after setup.
I have installed the energy rom, the most recent version. It still hangs at the boot after the rom does the soft reset...
Help please?
jrmgolem said:
Why is it that, having run the HSPL update on my HD2 and checked that its successful, does my phone hang on the white HTC boot screen when it reboots after setup.
I have installed the energy rom, the most recent version. It still hangs at the boot after the rom does the soft reset...
Help please?
Click to expand...
Click to collapse
you have installed the required radio yet?if not, boot to bootloader, flash teh radio via usb, , , restart the phone.
samsamuel said:
you have installed the required radio yet?if not, boot to bootloader, flash teh radio via usb, , , restart the phone.
Click to expand...
Click to collapse
I have now installed a 'Leo_RADIO_15.31.50.07U_2.07.51.05 **(from HTC **???? )' then re-installed the Energy Rom, but still getting stuck at the white boot screen after the first reboot, so I have now done a hard reset and the phone still hangs...
Any more ideas?
Sorry for the double post but my other one is on page 94 of a different thread and probally wont get seen and i am now getting desperate,anyway
I have just followed the procedure as I was going to install a different ROM from ★ Miri & DINIK "Anastasia" ROM to replace my installed ROM from ENERGY
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
First I did a task 29 and now I am now stuck in the bootloader screen with its tri colour screen with USB in the white part,if I have the cable connected or Serial if the cable is removed.
I have tried a few times but it still stays on the boot screen.I am running windows 7 32 bit on my laptop and have tried all 3 different USB ports with the same result.
How do I get the phone back working?
Thanks
Your Phone is stuck in the bootscreen because you have removed the operating system with the task29. so this is normal.
make sure you have transferred the leoimg.nbh to the storage card and disconnect the phone from the cable. reboot the phone and flashing should start automatically. if it does not
now connect your phone to the computer and you will see the screen change from serial to usb
just follow the procedure as described in on the forum to flash from a computer. you do not need to be connected to activesync to do this as the phone is already in bootloader mode. just start the flashing program as described.
Thanks for that,I did realise thats the reason its stuck in the bootloader.I have connected the phone back to the computer a few times and waited untill the USB came onto the screen but the divice does not show up in "My Computer" and when I try to restore the ROM I get a 260 connection error.
I think I have just sorted the problem,not sure the reason but it was failing on a 16GB fat32 card. I have just borrowed a 2GB card from a friend put exactly the same image on and it is now updating the ROM.
Thats strange how the card has made that much of a difference,but thanks anyway.
I'll let you know how the update goes in a few minutes when it completes.
Thanks
many people have said the same thing. 16 doesn't work, 8 sometimes works, 2 usually works.
Up and running great now,,Looks like i'll have to invest in a small 2GB card as a back up,
Thanks again
Stuck also in bootloader
wilcovh said:
Your Phone is stuck in the bootscreen because you have removed the operating system with the task29. so this is normal.
make sure you have transferred the leoimg.nbh to the storage card and disconnect the phone from the cable. reboot the phone and flashing should start automatically. if it does not
now connect your phone to the computer and you will see the screen change from serial to usb
just follow the procedure as described in on the forum to flash from a computer. you do not need to be connected to activesync to do this as the phone is already in bootloader mode. just start the flashing program as described.
Click to expand...
Click to collapse
I flashed my HTC Leo to Dutty Multi-lang, when finished and reboot it won't and gets stuck in the "stick together" bootloader (yes, I am with TMOUS). I did what you suggested but it still won't boot, please help!
paulzhang07 said:
I flashed my HTC Leo to Dutty Multi-lang, when finished and reboot it won't and gets stuck in the "stick together" bootloader (yes, I am with TMOUS). I did what you suggested but it still won't boot, please help!
Click to expand...
Click to collapse
is the multi lang one the one with the base 3.04 rom? that 3.04 base isn't from tmous, have you confirmed it is tmous compatible? (i dont know enough about teh 3.04 rom)
samsamuel said:
is the multi lang one the one with the base 3.04 rom? that 3.04 base isn't from tmous, have you confirmed it is tmous compatible? (i dont know enough about teh 3.04 rom)
Click to expand...
Click to collapse
It is 3.28.4.0
sorry, don't know what that means and i can't go hunting right now. it "sounds" like what happens when you flash a non tmous rom to a tmous, (unlike flashing the wrong radio, it doesn't brick the tmous, it just won't boot)
if i were in your shoes, id grab a known tmous compatible rom and flash that.
samsamuel said:
sorry, don't know what that means and i can't go hunting right now. it "sounds" like what happens when you flash a non tmous rom to a tmous, (unlike flashing the wrong radio, it doesn't brick the tmous, it just won't boot)
if i were in your shoes, id grab a known tmous compatible rom and flash that.
Click to expand...
Click to collapse
And how would you do that if the darn phone won't boot? I can copy a known ROM onto the card, but then how do I flash it from there? Thanks.
paulzhang07 said:
And how would you do that if the darn phone won't boot? I can copy a known ROM onto the card, but then how do I flash it from there? Thanks.
Click to expand...
Click to collapse
no need for sd card,,,boot into boot loader, connect usb, run your flash.
samsamuel said:
sorry, don't know what that means and i can't go hunting right now. it "sounds" like what happens when you flash a non tmous rom to a tmous, (unlike flashing the wrong radio, it doesn't brick the tmous, it just won't boot)
if i were in your shoes, id grab a known tmous compatible rom and flash that.
Click to expand...
Click to collapse
Problem resolved... not sure what caused it but I am a happy man now. This is what I did if this helps with people who might have the same problem.
1. Formated the SD card FAT32.
2. Copy and rename nbh file to LEOIMG.nbh to SD card.
3. Reset the phone while holding the down button. It jumps to bootloader.
4. Hook it with PC, USB is shown on the phone.
5. Download and extract SSPL_RUU.exe and RUU_signed.nbh from Dutty Cream la de Cream ROM into the same folder.
6. Run SSPL_RUU and it came up and running again.
Thanks for your help though, made me feel hopeful because I was getting ready to dump the phone and run over it with my car
no worries, just for info, step two was not needed, it would have tried to flash leoimg at step three if you hadn't been using the stock gig sd card (the 16gb cards don't work, which is why the phone ignored it.)
paulzhang07 said:
Problem resolved... not sure what caused it but I am a happy man now. This is what I did if this helps with people who might have the same problem.
1. Formated the SD card FAT32.
2. Copy and rename nbh file to LEOIMG.nbh to SD card.
3. Reset the phone while holding the down button. It jumps to bootloader.
4. Hook it with PC, USB is shown on the phone.
5. Download and extract SSPL_RUU.exe and RUU_signed.nbh from Dutty Cream la de Cream ROM into the same folder.
6. Run SSPL_RUU and it came up and running again.
Thanks for your help though, made me feel hopeful because I was getting ready to dump the phone and run over it with my car
Click to expand...
Click to collapse
Thanks I did these steps a million times and now Im still in the bootloader screen. What else can I do? Thanks for the help.
im also still with hang with that problem.even tried jteg.but wont successful .bc of i tried to restore from win7 to 6.5. now still set is dead from long time
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Ok try this, turn the phone off then hold the low volume botton n the power botton at the same time, n if it takes u to the bootloader then u r good, just search on how to install a rom of ur choise, good luck
Sent from my HTC HD2 using XDA Premium App
froibet said:
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Click to expand...
Click to collapse
Well the fact that it will even turn on means it is not bricked. A bricked HD2 will not even turn on the most it will do is flash tihe led light and vibrait a couple of times.
Follow the instructions of the above post and pull up bootloader, if bootloader comes up you can save the HD2. Depending on if you want to flash a official srock ROM or a custom ROM to the HD2 will dictate your next step.
If you want a official stock ROM then just download and flash the official update from T-Mobile.com just type in HTC HD2 update in the search box on the home page and you will find it. You will have to enter the IMEI number to download it wich you can find this number behind the battery. To flash it connect the HD2 to a computer via USB cable while in bootloader and wait for the serial in the white bar at the bottom of the bootloader screen to change to USB and the computer to show it recognizes the HD2 then run the update utility and follow all the on screen instructions.
If you want to flash a custom ROM as in custom Windows Mobile, NAND Andriod ROM, or Windows Phone 7 ROM then you will have to flash HSPL to the HD2. Download HSPL4 and flash 2.08 HSPL if hou want to flash a NAND Andriod ROM as MAGLDR only supports 2.08 HSPL. Or a Windows Phone 7 Rom, or flash 3.03 if you just want to flash a custom Windows Mobile ROM.
Now if you want a NAND Andriod ROM or Windows Phone 7 you will have to download MAGLDR and flash it to the HD2.
If you want a custom Windows Mobile ROM download the ROM of your choice and fladh it using the .exe or RUU wich ever one the ROM has. Note do all flashing of what I have previously mentioned via the method I mentioned before.
If you are wanting to flash a NAND Andriod ROM or Windows Phone 7 ROM then download the ROM of your coice and flash it using MAGLDR and the instructions of the ROM developer in thread for the ROM.
Now this is very important. I see from the picture you have a T-Mobile(TMOUS) HD2 so no matter what you do, do not flash a ROM with a radio version that reads like these 2.04.50.xx, 2.05.50.xx, or any radio that is x.xx.51.xx they will brick/kill a TMOUS HD2.
froibet said:
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Click to expand...
Click to collapse
I would recommend flashing a stock T-Mobile ROM, since that appears to be the flavor of the phone. This will install the correct radio. Once the phone is working, continue as per normal for flashing the ROM. You will have to reinstall hardspl.
thanks for the info guys! i really appreciate the support!
it seems like it won't read the USB... is the port busted?
froibet said:
thanks for the info guys! i really appreciate the support!
it seems like it won't read the USB... is the port busted?
Click to expand...
Click to collapse
try this:
1) download your stock ROM.
2) put it on your SD card via a card reader, you want an .NBH file.
3) rename the file LEOIMG.NBH
4) make sure the phone is off, make sure your SD card is back in your phone.
5) hold down and power
6) it should go to a tri-color screen and say something about flashing the image, hit power to confirm
7) it should flash no problems.
MAKE SURE YOU DOWNLOAD THE CORRECT ROM FOR A TMOBILE US HD2
Have exactly the same problem with my friends phone.
Its a TMOUS and sticks on the same boot screen.
He screwed it up when trying to install Android NAND on it.
I can enter bootloader And I have managed to get rid of MAGLDR and CWM.
I have HSPL 3.03 installed on it, but when I try to install the latest ROM from TMOUS it fails at 8% and tells me that
'ERROR 290: INVALID COMMAND
This update Utility cannot be used for your PDA phone. Please check your update utility'
Tried copying the relevant file to the SD card and renaming it leoimg.nbh but the install fails HERE aswell with the error:
"RADIO_V2 - RSA Fail"
I managed to install an energyrom onto it, but it wouldnt go past the initial boot screen
Any help appreciated
Boradan said:
Have exactly the same problem with my friends phone.
Its a TMOUS and sticks on the same boot screen.
He screwed it up when trying to install Android NAND on it.
I can enter bootloader And I have managed to get rid of MAGLDR and CWM.
I have HSPL 3.03 installed on it, but when I try to install the latest ROM from TMOUS it fails at 8% and tells me that
'ERROR 290: INVALID COMMAND
This update Utility cannot be used for your PDA phone. Please check your update utility'
Tried copying the relevant file to the SD card and renaming it leoimg.nbh but the install fails HERE aswell with the error:
"RADIO_V2 - RSA Fail"
I managed to install an energyrom onto it, but it wouldnt go past the initial boot screen
Any help appreciated
Click to expand...
Click to collapse
Try running a Task 29 on your friends HD2. This willtotally clean out the NAND memory of the HD2 and reformat it, kinda sounds like that is what is needed to be done. He may have messed the NAND memory format up when he was trying to install the Andriod. You will have to reflash a Windows Mobile ROM after you run the Task 29 as it will not ha e a ROM on the phone then. You will not have to reflash HSPL cause it will not remove it.
It seems that the problem is RADIO related. I can task 29, and I can install The latest Energyrom, but I CANT install a radio.
There is no radio ON the phone at the minute it seems. When I try to do a radio install, it asks me if I want to go from version ' ' to the update I am using.
None of the installers see a radio on the phone, and trying to install the radio always fails at 96%. This would seem to be the same if I try to install the official TMOUS latest ROM with radio from SD Card. It fails at the radio install part.......
Maybe time for a new thread for this one.......
orangekid said:
try this:
1) download your stock ROM.
2) put it on your SD card via a card reader, you want an .NBH file.
3) rename the file LEOIMG.NBH
4) make sure the phone is off, make sure your SD card is back in your phone.
5) hold down and power
6) it should go to a tri-color screen and say something about flashing the image, hit power to confirm
7) it should flash no problems.
MAKE SURE YOU DOWNLOAD THE CORRECT ROM FOR A TMOBILE US HD2
Click to expand...
Click to collapse
i can do all this without connecting to the PC? just flashes from the SD card???
froibet said:
i can do all this without connecting to the PC? just flashes from the SD card???
Click to expand...
Click to collapse
Yes you can flash radio and ROM from your SD card. Here is a link to the thread on doing this gives step by step, check it out.
Hi Guys,
I am getting desperate with my HD2. I've read and tried most of your advices here on XDA, but I can't get rid of HSPL from my phone and return to stock ROM to send it for repair.
When I tried to flash my phone directly from SD card with renamed .nbh file, it would always get stuck at some point of installation and would leave me with phone that wouldn't boot, neither Android nor Windows. When I flash the phone thru USB while in boot loader mode (i tried few roms and radios, most recently radio 2.06.51.07 with HTC_WWE_1.66.405.2 rom)
It would install correctly and even boot the Win Mobile, but once restarted it wouldn't boot again and would get stuck on a blank white screen. Also the HSPL is still shown on the boot loader screen.
when I repeated the process and installed both radio and rom again, the same thing would repeat and I'm stuck on blank screen again.
My boot loader screen shows this:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
cotulla HSPL 0x40
The phone was from UK Virgin mobile, but came unbranded and I'm not sure what the stock rom was. I tried flashing it with SPL 2.08, but that wouldn't get me rid off the HSPL.
Any help will be greatly appreciated!
Thanks!
Get hspl2, and choose 1.66.0000
Retry the wwe 1.66 rom again.
Post results.
Spl 2.x is tmous spl, and doesn't like to let itself downgrade, which is what the 1.66 rom is trying to do.
thanks for the reply!
Just tried and it went without any error logs (only took couple of seconds) and claimed it was successfully installed, but when restarted, the boot loader screen still says SPL-2.08 HSPL.
any other ideas?
stuck radio then, most likely, which often prevemts spl from changing too.
no definitive answer as to what exactly causes it, , corrupted nand most likely.
when you say it sticks part way thru the flashing, , does it stick around 8-10%? if so then its definitely a stuck radio problem. do you get 'radio_rsa fail' or something similar?
sadly there isn't any way i know of to fix it. all i can suggest is you try various troms from sd. i read one thread (out of hundreds with teh same issue) where the OP finally found one stock rom that took.
dont forget that it needs to be teh correct stock rom, not just any stock rom. so an O2 uk hd2 must use o2 uk stock roms. 1.42, 1.72 or 3.14.
locate your correct stock roms and try them all.
Yea exactly thats what I get when flashing from SD card, stuck soon at around 10% and brings up the radio fail log.
When I do that and try to flash them all from SD card, shall I install radio first or it doesn't matter when flashing ROM from SD card?
Any idea how to find out what's the stock rom for my hd2? I tried HTC site but you can't download anything from there for HD2 since they updated their site.
Also, shall the SD card be formated with ext3 system partition on it (the android setup) or just use an empty FAT32 formatted card?
Vipo said:
Yea exactly thats what I get when flashing from SD card, stuck soon at around 10% and brings up the radio fail log.
When I do that and try to flash them all from SD card, shall I install radio first or it doesn't matter when flashing ROM from SD card?
Click to expand...
Click to collapse
doesnt matter when flashing stock roms, they all imclude a radio. It cant hurt to try flashing teh radio separately, but i suspect teh same outcome.
Any idea how to find out what's the stock rom for my hd2? I tried HTC site but you can't download anything from there for HD2 since they updated their site.
Click to expand...
Click to collapse
pretty sure virgin phones came rom unlocked, so look at teh filenames of teh roms, , you want 'HTC-WWE' where HTC means unbranded, and wwe means world wide english.
example
o2 branded rom filename .. RUU_Leo_S_O2_UK_3.14.206.1_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
unbranded rom filename ... RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
ALso, see the green numbers? thats the same for all same roms, so all o2 roms are 206 and all unbranded wwe are 405
Also, shall the SD card be formated with ext3 system partition on it (the android setup) or just use an empty FAT32 formatted card?
Click to expand...
Click to collapse
shouldnt matter, but again it cant hurt to fully format the phone to fat32, full format, not quick format.
Thanks for your help man! Will try and post results later.
Vipo said:
When I tried to flash my phone directly from SD card with renamed .nbh file, it would always get stuck at some point of installation and would leave me with phone that wouldn't boot, neither Android nor Windows.
Click to expand...
Click to collapse
Thats because you are not booting into the right bootloader. See pt 4 below.
No need for all the hassle, there is a really easy way to do this. This will revert your phone ENTIRELY. Remember to have at least 50% battery before doing this:
1.Download official ROM and extract with winRAR or WinZip.
2.Rename the *.nbh file to LEOIMG.nbh
3.Format a SD card with FAT32 and put the LEOIMG.nbh file in the root directory
4.Insert the card to the phone and enter bootloader (While phone is Off:Hold Volume down & press power button)
5. The bootloader will recognize the .nbh file and ask if you want to flash it. Follow instructions
6.Wait a few minutes and you are back to WM6.5
Tried, doesnt work. Explained in the first post.
why are you sending it for repair in the first place?
I dropped it once and since then has the screen got some weird yellowish/greenish colours. seems like some contacts got fu**ed up, but there isnt any mechanical damage visible, so they should repair under the warranty.
But only if in bootloader the spl says 1.42.0000 1.66.0000 or 3.03.0000
Anything else will be rejected.
What you mean by 'not the right boot loader'. I did get it to start installation and recognise the file, but after a while it would come up with a error log saying something like radio failed or something like that...
Yea I know, thats why Im trying to put it back to stock.
what size sd card are you flashing the .nbh file from? you will need to use a 4gb or smaller sd card.
what he meant by the right bootloader i think was to be flashing the .nbh from the tri-color bootloader, not from MAGLDR or CWM Recovery.
If you are using a 4gb or smaller card and it's still failing at the radio, then you might as well try flashing a few different radio's by themselves and maybe you'll get one of them to take, then possibly be able to get out of HSPL
well yea, thats what will be trying to do next.
it wont let me to MAGLDR or CWM, seems like these files got corrupted too so yea, im using the tri-color bootloader.
and its 2GB sd card im using
so i guess the only way now is to try flash different roms...
dude 2-3 days back even i was facing the same problem, and here i am writing , how i get through this. i guess you already tried this, but still i am writing so that you get some help...
1)i use hspl2 and select 1.42.0000 to remove my hspl 2.08.
2)extract stock rom using "7-zip" and in the extracted folder find "RUU_signed.nbh" rename it to "LEOIMG.nbh". copy that file to your formated fat32 micro sd card.
3) reset the your hd2 while holding vol down and end call button.
4) first a tri-color screen will appear, keep pressing both the buttons, then a gray screen will come with written "loading".
5) after that 1 more gray screen will appear, loose the vol down button now, rest everything will go smooth, u dont have to do anything.
meet.rajiv15 said:
dude 2-3 days back even i was facing the same problem, and here i am writing , how i get through this. i guess you already tried this, but still i am writing so that you get some help...
1)i use hspl2 and select 1.42.0000 to remove my hspl 2.08.
2)extract stock rom using "7-zip" and in the extracted folder find "RUU_signed.nbh" rename it to "LEOIMG.nbh". copy that file to your formated fat32 micro sd card.
3) reset the your hd2 while holding vol down and end call button.
4) first a tri-color screen will appear, keep pressing both the buttons, then a gray screen will come with written "loading".
5) after that 1 more gray screen will appear, loose the vol down button now, rest everything will go smooth, u dont have to do anything.
Click to expand...
Click to collapse
but if you return to hspl 1.42.000 the you cant flash your rom ..you need hspl 2.08 only to flash
Thanks zaaaan but I got bit luckier and virgin replaced the phone for no extra charge. I was 2 weeks before the end of the contract and I gave it a shot, sent it to virgin. They got back to me saying that they cant repair it and will therefore send me a replacement phone. I got new desire, bit smaller, but android on it runs really nicely and most of all its built for it, so no more flashing and killed hours of running in circles.
then I got 20£ discount just to stay with them on no contract. they got me
should probably add that the phone still had hspl on it
I'm trying reinstall WM6.5 on my HTC HD2 from MAGLDR V1.13.
I've downloaded the stock rom from HTC website and im trying run the installer but it fails it cant seem to pick up my phone as a USB connection.
I tried the bootloader way but it always get stuck at the installation part at 0%.
what am i? doing wrong, its driving me mad..
SPL version is SPL-2.08.0000
Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.
GreatLorens said:
Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.
Click to expand...
Click to collapse
thanks for the reply,
done the above a few times but no joy..
I see USB at the bootloader and when i run the ROM update, it doesnt show me what the current version of the phone is but just says it will update to the version 3.14.110.1! so when i start the install process nothing happens, i get the error [302]..
why is that?
any other way to flash this??
rafter_01 said:
thanks for the reply,
done the above a few times but no joy..
I see USB at the bootloader and when i run the ROM update, it doesnt show me what the current version of the phone is but just says it will update to the version 3.14.110.1! so when i start the install process nothing happens, i get the error [302]..
why is that?
any other way to flash this??
Click to expand...
Click to collapse
i had came across this issue last week.
when in tri-color mode, re-install hspl 2.08 and then magldr 1.12/1.13.
then try installing wm6.5.
This worked in my case.
Check if it does in urs too...
Al the best...
ankushmulay said:
i had came across this issue last week.
when in tri-color mode, re-install hspl 2.08 and then magldr 1.12/1.13.
then try installing wm6.5.
This worked in my case.
Check if it does in urs too...
Al the best...
Click to expand...
Click to collapse
what ive done so far,
re-installed the hspl 2.08 and then installed the radio 2.15.50.14 from the following site: http://www.addictivetips.com/mobile/how-to-install-hardspl-2-08-on-htc-hd2/
but now at the bootloader im getting the following error 'upgrade ROM code error Please try again"
What have i done wrong???
thanks
flash hspl ... radio ... then mag ... then try the downgrade to winmo
rubledub said:
flash hspl ... radio ... then mag ... then try the downgrade to winmo
Click to expand...
Click to collapse
after the radio, I cannot download magdlr, it stops at 29%.. Or sometimes doesn't do anything!!
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
GhostXSeries said:
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
Click to expand...
Click to collapse
Thanks for this info, will try it. Have you got a link to task 29? Is it a software?
No but it is all over XDA. I think you'll find it someware on the WM 6.5 thread. If that doesn't work your nand will be stuffed but it has allways worked for me!
GhostXSeries said:
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
Click to expand...
Click to collapse
Yes, even i suggest you the "flash via micro sd card" method becoz it works in worst cases. and follow all the steps sequencely. good luck
Task29 gives an error 290 and doesn't complete.
Im getting frustrated... What can i do next
task 29 now wipes my phone but everytime i flash a new rom is crashes at 9% or 10% and then i get the error 290.
i downloaded the stock rom for my phone... argggh what can be done?
thanks
Sounds like nand is dead. Looks as if you will have to return it to get it fixed!
i must agree with ghost ... sounds like you flashed the poor baby to death :'( sad sad day! and very rare i might add!
GhostXSeries said:
Sounds like nand is dead. Looks as if you will have to return it to get it fixed!
Click to expand...
Click to collapse
cannot believe i messed it up.......
know where i can send it for repair? will HTC cover it under warranty? will they be suspicious?
anyone? do i need to ring my phone contract people or go directly to HTC?
Thanks
Depends how old it is. It may need to go directly to HTC to get it fixed.
I read somewhere that error [290]: Invalid Command - the ROM Update Utility has encountered communication errors during the update process.
Try changing the usb cable/connect directly to usb port (not usb hub) if you still want to use usb for flashing.
I always use the sdcard method when there's a problem flashing via usb. Rename RUU_signed.nbh (extract from stock rom exe package) to LEOIMG.nbh and copy the file to sdcard (sdcard MUST be formatted as FAT32 - use HP format tool). Put sdcard into the phone and boot into bootloader mode ... see if it works ...