Database Users

There HAS to be an easier way to set up TomTom GPS? Surely?!

Ive installed my TomTom and its all working now, I can browse through the map and its all good. BUT! Im not recieving any GPS?
I read through a few posts about how to make it work and there was lengthy talk of downloading things to hijack my phone or something?
I thought TomTom was supposed to be compatible with the MDA Vario? Surely there should just be an option to say, CONNECT!
If anyone can explain the simplest way for it to work I would be very happy, Im using tomtom5.2

Well I just installed my TomTom yesterday and connected succesfully with my BT GPS Reciever.
What you have to do is : Enable your BT through the Soft button on the left, or by going to "Start" then "Settings" then "Connecting Tab", click on Bluetooth icon, check the "Bluetooth Enable" ( my device is in german language, maybe I write wrong translation for the words ) then below hit the devices tab, click on the New to check for any near BT device... When your PPC recognises your GPS, click and hold on it in the list, then choose edit (am not sure about the right word since mine is in german lang.) check the Seriel connect... , save it, then you goes back to BT devices list, now below hit the "COM-connects" now you see in a list two lines, choose the first one ( should begin with the word "New..." then choose COM 6 for your BT GPS, save all this... Go to your TomTom and start it, there you have to go to GPS settings and choose the same COM, in our case it is "COM 6", that's it... TomTom should now recognises your GPS.
I hope this helps.

Thanks, I think Im getting somewhere...
I have went onto
bluetooth
devices
new partnership
but all it is finding is something called HOME-C8P8OHXESF ?
When I try and hold down on this and edit it has a section that says
Select services to use from this device
But there is no options to click on ?

Well, the device name that your wizard found doesn't look like a gps, but who knows, maybe this is it's modell's name.
Well I found this tutorial from the TomTom sit itself abou how to configure your GPS to work in any PPC that runs WM5 :
http://www.tomtom.com/support/solution.php?GID=3&PID=188&SID=196&CID=223&Language=1&FID=4806
I hope this helps.

Newbie questions

Hi all,
Just got my I-mate JAM last week ... and absolutely love it. I know the JAM isn't the latest and greatest anymore, but I wanted a small PPC phone and JAM's the perfect size. The JAMin is too expensive for me, and I also think its improvements (wifi, EDGE, WM5 to name a few) are over-rated.
I had a separate PPC (toshiba e330 ... yeah it's about time it retires) and a smartphone (MPx220) before so it's great I only get to carry 1 device instead of 2.
Anyways, got a few newbie questions I hope you guys can help me with ...
1- Storage memory??
I realize the JAM has limited memory so I've been installing as many programs as possible on the 1G SD memory card.
I still found that ~ 60% of 'storage memory' is used though, so I started moving some more programs to the memory card (and had to relink them one by one).
Afterwards I found the 'storage memory' has actually gone UP even more ... from 60% to 68%??!
What is storage memory? I thought storage memory is the stuff (program / database) stored on the RAM, so by moving some of the programs to the flash card I should see the storage memory go DOWN, not UP?!
When I run something like a 'space detective' I find that all of my big files are on the memory card anyways, so I really don't know how my storage memory got so high, and don't know how to get it back down neither.
2. Repeated resetting
Everytime I do a soft-reset, the PPC has a tendency to do repeated resetting before I finally get it back ... the first time it freaked me out. I thought it's gone into an endless loop and I'd have to do a hard-reset ... good thing I got it back after 4-5 soft-resets. Once I get it back it actually runs stable, and wouldn't reset itself.
Is that normal? Has anybody else experienced this? Usually it'd reset itself again once it gets to loading the phone alarm today plug-in, or when it connects to the phone network.
I currently have the following plugin's installed on the today screen:
-phone alarm
- ADB Weather
- Calendar
And I also run WisBar Advanced 2 ... but I have disabled WA2 to reload itself automatically on soft-resets.
I put phone alarm, ADB weather and WA2 on the main storage instead of memory, because I don't want to increase the chance of crashing.
Does anybody else has this problem? Do I have a software conflict here?
3. Photo contact?
I use photo contact that comes with the phone ... now that software is a piece of crap to begin with, keeps freezing the PPC even for the smallest thing.
And, 5 times out of 10 when someone who's been assigned a photo ID calls, the photo doesn't show up. This is despite I've put the resized photo contacts on the main memory, not the memory card.
Anybody experienced the same problem? And what's a good photo contact ID program to recommend?
4. Good dialer program?
I can also use a good replacement dialer program ... the dialer program that comes with the phone works, but it's pretty slow in suggesting contacts as I dial, and the buttons a tad small as well for 1 hand operation.
I tried D9, but for whatever reason it doesn't install for me ... plus, I also need the DTMF tones to check voicemail and what not.
5. Must have appz?
Any other must have appz you guys would highly recommend? Since getting the phone I've installed:
- phonealarm (great appz for changing profiles and displaying sms / vmail / email / missed calls)
- Wisbar Advanced 2 (great launcher)
- Cyberon BT voice dialer (not sure how it's not included with the phone)
- Resco File Explorer
- Resco Picture Viewer
- Mapopolis
- Intelligolf
- Sprite backup (works well, but extremely slow if launched from the PPC)
- eWallet
Thanks! Any comment / suggestions is appreciated!

Number16, welcome to the board.
I'm afraid I don't have time for a thorough response right now, but some thoughts:
- please read the board rules. Posting a thread with a useful topic title will get you more help, faster. It's in your interest.
- read the wiki and do search the board. The Magician is still my favourite phone, and we've all spent years posting about issues for it. It's likely most of your concerns have already been discussed.
- specifically read the wiki on favourite software. It's far from complete, but it'll point you in the right direction. Someone asks the question every 4.7 minutes, precisely, day and night, so you will find other more detailed responses elsewhere. My recommendations: get gsfinder, claunch and SmallMenuPlus NOW.
- investigate the BigStorage Rom hack. (see Wiki)
Will try to post more later if possible.
V

apart from games I'd recommend the following:
1. Eye on privacy
2. XCPU Scalar
3. SPB plus
4. HiCalc
5. Novii remote
6. imusic

I would recommend;
AE Button plus
Allows you to map up to 3 functions per button, works great on the magician
+ its free
http://www.pocketgear.com/software_detail.asp?id=20322
"Total commander" is a great free file explorer
"Mortscript" is a useful for custom tweaking
"PHM Traylaunch" put shortcuts in the System Tool Tray
Also search this forum for a sound tweak that vastly improves audio quality when listening to music via headphones
& checkout http://www.pocketpcfreewares.com/en/index.php

Thanks guys, great advices there.
Speaking of AE Button plus, I installed the (free) ver 1.0.1 but somehow it only works for the contact and schedule button. I didn't re-assign the TALK/END buttons because it says if I do I won't be able to use these buttons in the dialer.
And somehow AE Button also doesn't work for the camera and record buttons (on the side) neither ... if I re-assign some other tasks to them, they don't bring up the camera application but won't start the intended application neither. I just hear a few beeps and nothing happen.
Does the paid version of AEB Plus improve that?
Sorry if I've gone off-topic here...

number16 said:
Thanks guys, great advices there.
Speaking of AE Button plus, I installed the (free) ver 1.0.1 but somehow it only works for the contact and schedule button. I didn't re-assign the TALK/END buttons because it says if I do I won't be able to use these buttons in the dialer.
And somehow AE Button also doesn't work for the camera and record buttons (on the side) neither ... if I re-assign some other tasks to them, they don't bring up the camera application but won't start the intended application neither. I just hear a few beeps and nothing happen.
Does the paid version of AEB Plus improve that?
Sorry if I've gone off-topic here...
Click to expand...
Click to collapse
That's the same version as i'm using. Works on my contact & calender buttons & on my camera & record buttons perfectly, I use the camera button for the camera & flight mode toggle, I have mortscripts assigned to the other buttons which changes the buttons functions depending on what program is in the active window.
I find this easier to use stylus free than WM5 (I also own a Universal & a Prophet for the wife)
From your first post it sounds as your devise is a bit buggy, might be worth doing a hard reset or flashing it with a custom ROM.
A well setup Magician is an almost perfect PDA/Mobile phone balance
Have fun.
PS; Try the free trail for the paid version of AE Button & see if you like it.

Mister B said:
That's the same version as i'm using. Works on my contact & calender buttons & on my camera & record buttons perfectly, I use the camera button for the camera & flight mode toggle, I have mortscripts assigned to the other buttons which changes the buttons functions depending on what program is in the active window.
I find this easier to use stylus free than WM5 (I also own a Universal & a Prophet for the wife)
From your first post it sounds as your devise is a bit buggy, might be worth doing a hard reset or flashing it with a custom ROM.
A well setup Magician is an almost perfect PDA/Mobile phone balance
Have fun.
PS; Try the free trail for the paid version of AE Button & see if you like it.
Click to expand...
Click to collapse
i have 2.5.1 registered version i cant figure how to toggle flight mode operation..help plz and i wanna ask if we can put magician on vibrate mode with any any key ???

max414 said:
i have 2.5.1 registered version i cant figure how to toggle flight mode operation..help plz and i wanna ask if we can put magician on vibrate mode with any any key ???
Click to expand...
Click to collapse
Flight mode toggle
Download from link below then unzip & copy the program below to your phone or sd card, then create a shortcut to it in your programs folder (if you have a shortcut in your programs folder, it will show up in the menu in Buttons). Then go to "Settings>Buttons" & pick what button you want to link to the flight mode toggle program.
Vibrate mode toggle
You could create a batch file to use with Mortscript (freeware) which would turn your vibrate on & off, then link this batch file to a button.
Its quite easy to do, do a search for Mortscript. If you need help let me know & i'll write the script for you & give you what help I can in setting it up.
Mortscript is a great bit of software which can enable you to solve a few problems so its worth doing some research on it.
http://myweb.tiscali.co.uk/pdamagician/wm2003sewm5software.html
http://myweb.tiscali.co.uk/pdamagician/Downloads/tel.on-off_100.zip

Mister B said:
Flight mode toggle
Unzip & copy the program below to your phone or sd card, then create a shortcut to it in your programs folder (if you have a shortcut in your programs folder, it will show up in the menu in Buttons). Then go to "Settings>Buttons" & pick what button you want to link to the flight mode toggle program.
Vibrate mode toggle
You could create a batch file to use with Mortscript (freeware) which would turn your vibrate on & off, then link this batch file to a button.
Its quite easy to do, do a search for Mortscript. If you need help let me know & i'll write the script for you & give you what help I can in setting it up.
Mortscript is a great bit of software which can enable you to solve a few problems so its worth doing some research on it.
Click to expand...
Click to collapse
i have got mort script but it s too much for my little brain......if was hoping if u could provide the file i will assign it a button ...looking forward to your help...thx for flight mode toggle

I've got the paid version of AE Buttons Plus and it still runs a little funny sometimes ... certain buttons will work from time to time. For example, I left "single click" for Button1 untouched (which should be Calender by default) and "double click" would start Notes. Well, it starts Notes on double-click all right, but from time to times single-click wouldn't do anything. A reset usually fixes the problem, but then it'll happen again after a while.
So instead of leaving "single click" for the button un-assigned, I've assigned it to Run Appz -> Notes. That did the trick so far.
I also find that Wisbar Advanced 2 is causing quite a bit of problem ... anybody else has problem with it? With WA2, PhoneAlarm and AEButtons running at the same time, the Magician gets pretty unstable. It's a lot better if I don't load WA2.
Which is too bad, cos i've been a fan of Wisbar from long ago (well, it was a freeware then) ... anybody has any suggestion for a taskbar launcher? I really don't want something that's too busy looking, and I don't like clauncher ... I use the today screen for caleder plugin's and what not.
Thanks,

max414 said:
i have got mort script but it s too much for my little brain......if was hoping if u could provide the file i will assign it a button ...looking forward to your help...thx for flight mode toggle
Click to expand...
Click to collapse
"max414"
I've sent you a private message rather than go further off topic on this thread.
Check your private messages & get back to me.

If you guys interested have a look at the 10 Best Softwares
Comments?

Here's my 2 cents on this '10best software' list ... befoer I start I gotta say for the most part I don't agree with it, for 1 reason or another.
1. Wisbar Advanced / Desktop.
Ok, I really like Wisbar, dating back to the PPC2002 times. It was a smart little program that worked very well as a launcher and took up close to nothing in terms of memory and storage, and better, it was a freeware. The Wisbar advanced these days though, is a memory hog for what it does. It may not be a problem on somehting like a x51v, but on a device like the Magician it really isn't the best solution for launcher. Plus, I dunno if it's just me, but I ran into all kinds of software problems with Wisbar advanced 2, potentially caused by software conflict with other softwares I have. Maybe someone else have better luck with WA2 though.
2. PocketBreeze
Never really used it, but personally I'm not a fan of busy today screen ... but that's just me.
3. PocketWeather
DOn't know why I'd pay for this software when I can get ADBWeather for free.
4. PocketMusic
I used PocketMusic in the PPC2002 days, and it's not bad ... but these days when you can get GSPlayer for free, it gives PM a run for the $$.
5. RescoFileExplorer
No question about this one. Always the first program I install after a hard-reset, 'nuff said.
6. Memmaid / PocketMechanics
I use Memmaid and it's great. Never used PocketMechanics
7. QuickNotes
Never used it ... so can't really say.
8. SPB Backup
I used Sprite Backup on my old PPC so I continue to use it on the Magician. Other than being rather slow when it scans your device, I have no complaint about Sprite. I never used SPB so I can't compare.
9. Internet Browser
Haven't tried anything other than IE so can't say ...
10. Theft Alarm
Well, I use eWallet to store all the sensitive information ... never used theft alarm so can't say.
I guess that's just the list for PPC ... because for PPC phones, I'd say PhoneAlarm's one of the top 'must-get' softwares for sure.

Garmin - Various Questions

First, a little clarification. I found instructions on here to install to a bigger microSD card and followed them. =)
I installed two programs:
GarminMobileXTforPocketPCwithGPS10_41001wBeta.exe
and
GarminMobileXTforWindowsMobile_42050w.exe
Anyway, what are these? When I try to go to Garmin's site, they have mobile 10, mobile 20, mobile XT, for laptops, for PDAs, etc. What the heck do I even have? How do I stay updated with the latest version (I figure someday they'll fix the time bug that mucks with system time if you don't get a satellite lock)?
Then some other, random stuff (for background, I have a 260W as well);
1. Will XT (or whatever version it is) take custom vehicles like the 260? I created a vehicles folder and put them in there--same procedure as 260--and nothing...
2. Where the heck are the "my locations"? I'd like to keep the 260 and XT somewhat sync'd. (just copy a .gpx file on the 260)
3. on the 260, I can tap the car, and then save that location as a favorite. How do I do that on XT?
4. On XT, I can't seem to modify "my locations". I want to delete garmin europe, but there's no 'edit' button like on the 260. Can't rename either.
5. I tried to load a location on with live.com and it claimed to have done it successfully, but it didn't show up in my locations. I have softstick software that makes my storage card appear as a thumb drive, and I was using that (as the 260 also appears as a thumb drive). Why doesn't that work?
All in all the interfaces are pretty similar, but I was hoping for them to be identical. For instance, when the 260 can't get a satellite lock, it has the option of a demo mode to pretend there is GPS signal--great for setting things up while still inside. aaaah well, I guess. This is my 'play GPS', so it isn't a huge deal.
Anyway, thanks.

bump.
Anybody?

How do I add programs from storage card in NFSFAN's rom

I just flashed my phone with NFSFAN's Custom rom there are no predefine programs under the program list. I want to add GPS toggle and Igo8 icon that's installed on my storage card for easier access but I can't browse to it. Seems I can only add what's installed under Windows/Programs

To the best of my knowledge your problem is a generic one that has nothing to do with NFSFAN's ROM.
Everytime you flash a new ROM, generic or custom it wipes clean your windows start menu ( to "factory" state)
The programs installed on your SD card are still there, your just missing the shortcuts.
1. Use a file explorer of your choice and navigate to storage card/program files and all your installed programs should be there inside folders. The rest applies to the generic File explorer that comes with windows but any other program should be similiar.
2. go into a program folder, find the exe for the program (it's usually the one with the icon for the program). right click it with your stylus and select copy.
3. Next select menu (lower right soft key), under edit select "Paste shortcut"
4. Right click the shortcut, select either "cut" or "copy" (hint: using copy and leaving the shortcut allows you to skip the previous steps next time you flash a new ROM!!)
5. Navigate (using the up key) to Windows/start menu/program files and paste the shortcut there, for games there is a further directory. Also you can now rename the shortcut if you want.
6. Now open up the "all programs" soft key on the program tab of M2d, or select add and the program from you SD card should now be on the list.
For IGo8, I use TomTom. TT installs automatically when you insert the SD card into the ppc. After flashing a new ROM I just take my SD card out and then reinstall it. I am not sure if IGo8 works the same way or not but if the above steps prove frustrating for that, give it a shot.
It's a pain to go through this everytime you flash. It would be great if there was a tool to scan your SD card for programs and automaticaly install the proper shortcuts. There is none to the best of my knowledge. Then again, no one ever gets rewarded for being lazy.
Have fun, and if your new to this (especially flashing new ROMS), read...read...and read.
Best of luck

Wow, that's some detailed info. Thanks
I haven't tried your method yet, but I just remember that GPS toggle is actually a today plugin, NSFANS takes up the entire today screen, therefore it isn't visible.
I usually toggle my gps on before starting Igo and I get instant Sat lock.
As far as Igo8 Vs TT, I have both but I like the interface of Igo better. I don't have to reinstall anything after I flash. I just go to the Igo8 folder in my Storage card and execute the program. It runs off the storage card, there's nothing to install.

Cool, I've been meaning to try IGo myself sometime.
Not being able to use normal today plugins is a turn off for some. Only having one calendar line is another (M3d has a calendar tab). It's not NFSFANS's fault, that's Touch-flo 2d (Manila 2d). It is more a plugin itself than a whole new UI, it started on the diamond, was released on the Opal and Jade (Touch 3g) phones and ported to our devices by the devs here at XDA.
I love it personaly, it offers most users everything they need without going too deep into the actual winmo interface.....which is not to "touch" friendly.
I think a workable solution might be to see if you can put a shortcut to GPS toggle on the programs tab.
In the developement and Hacking section several devs were working on an m2d/today toggle that lets you toggle back and forth. There is also another app that tries to use the soft keys. Of course if you like M2d but need more than one prog tab, search "m2d operator tab" on this site. It is fully customizable and allows you to basically have 2 program tabs.
M2d operator tab:
http://forum.xda-developers.com/showthread.php?t=451623
Toggle :
http:///forum.xda-developers.com/showthread.php?t=464359
second today (M2d control):
http://forum.xda-developers.com/showthread.php?t=447504
If M2d proves to be not for you, I suggest using the old today screen with schens HTTC customizer in place. It's worth it's weight in gold as well. I was using it untill M2d came out.
Cheers,

well assuming you're using his newest one all you have to do is go to the program you want in the file explorer, tap and hold it, and then just tap "send shortcut to programs".

ehh, I just flashed my phone with Dette 2D v2.3 today. I'll mess with it for a few days and try something else until I find the one that feels good to me.

jmitr said:
Cool, I've been meaning to try IGo myself sometime.
Not being able to use normal today plugins is a turn off for some. Only having one calendar line is another (M3d has a calendar tab). It's not NFSFANS's fault, that's Touch-flo 2d (Manila 2d). It is more a plugin itself than a whole new UI, it started on the diamond, was released on the Opal and Jade (Touch 3g) phones and ported to our devices by the devs here at XDA.
I love it personaly, it offers most users everything they need without going too deep into the actual winmo interface.....which is not to "touch" friendly.
I think a workable solution might be to see if you can put a shortcut to GPS toggle on the programs tab.
In the developement and Hacking section several devs were working on an m2d/today toggle that lets you toggle back and forth. There is also another app that tries to use the soft keys. Of course if you like M2d but need more than one prog tab, search "m2d operator tab" on this site. It is fully customizable and allows you to basically have 2 program tabs.
M2d operator tab:
http://forum.xda-developers.com/showthread.php?t=451623
Toggle :
http:///forum.xda-developers.com/showthread.php?t=464359
second today (M2d control):
http://forum.xda-developers.com/showthread.php?t=447504
If M2d proves to be not for you, I suggest using the old today screen with schens HTTC customizer in place. It's worth it's weight in gold as well. I was using it untill M2d came out.
Cheers,
Click to expand...
Click to collapse
Don't you need to use astrogps launcher with iGO? I'm using NFS 1.25 and I need some sort of priming software for iGO and Tomtom, is there something else you are using?

I only use google maps (on my M2D search tab), and TomTom while driving.
I use no other program to prime at all.
I travel coast to coast with my job, I just use the search tab, or launch TomTom (never in the same order, sometimes only one or the other), and presto.....a fix within 10 seconds.
As I said in another thread, I was showing off my phone to my FO one day and let google maps run while we were departing Montreal. It showed us going down runway 28, turning eastbound and crossing the St. Lawrence. The only reason it quite was we were going to fast for google maps to update through the data connection. Later in cruise (at 23,000 ft) I launched TomTom, it was confused as heck (didn't know what road we were on!!!!), but it did show our proper Lat/Long (I confirmed it with the aircraft's FMS).
Been running smooth for a while, never a problem getting sats or a quick fix.

That was a helpful explanation for me too. I'm a noob and using your steps I now have Skyfire in my Start Menu. Many thanks !!!

Questions for Usage

Hi There!
I just bought this phone and I am struggling having come from Symbian. I was wondering if some kind person(s) would help point me in the right direction.
1) Bluetooth. How do I "authorize" a device so it makes connection automatically?
2) How do I send multiple contacts to a bluetooth device?
3) Under Contacts
4) Is there a way to unlock the screen without that unlock slider thing? It's very frustrating
5) How do I get a horizontal full qwerty? Seems like mostly I can't get it to come up ? Should it not be available all the time?
6) Under "people" I can't seem to add contacts to that? Is that it's purpose? How does "people" compare to "Contacts"?
7) Below the quicklinks there is a little arrow, but I can't get to what's below it which I think is more quicklinks? How do I add more?
8) Is there any way, even via purchased software, to get voice dialing?
9) Is there a good divx/xvid/x264 player?
10) is there a good backup utility?
Re Roms. It's very confusing for a new person, so many options etc... Can someone recommend a good one? I know they are all different and I am not sure what I want, but I guess speed and battery and stability are all important. I understand I might need to upgrade the radio as well, are they region specific? Will I lose my settings and data if I upgrade? Can I upgrade Roms on W7 x64 or is it like the Symbian where you need XP?
Thanks very much!

about dialing
i was in contact with htc germany .
they said that voice call is not part of the hd2 .
because of microsoft

1 - Connect your bluetooth device, then (if the screen isnt already showing) click settings - menu - all settings - bluetooth. click the device name, and choose properties, tick teh box 'connections authorised'.
2 - dont know
3 - no question?
4 - use a different unlocker? many people like s2u2 which is apparently very configurable.
5 - only available when you are typing, and only comes up in applications that support landscape.
6 - press an empty square, it lets you choose a contact to add.
7 - the litte arrow points down, so you slide the screen up. Click an empty space to add a program or shortcut or contact.
8 - very hit and miss so far. read the apps and themes section.
9 - searcj, there is one that a lot of people use, but i cant remember its name.
10 - again, search, there are a few that many people go for. Personally i dont use one, i just sync my contacts and reinstal programs every hard reset.

I came from symbian. Basically read and read and read this forum and search.
Most of the answers are here and i've asked some of them!
Give it a few weeks and you will be sweet as