Database Users

My phone is constant data transfer, help.

My phone constantly transfers data eating up the battery. I manually turn off data on the comm page. It stays off briefly then begins again. Any ideas?

Try this file, unzip, transfer over, install, open NO GPRS from the programs menu and hit toggle.
That should do it, just hit toggle to re-enable.
This is posted elsewhere, try using search first.

go to activesync, menu->schedule
and set "peak times" and "off-peak times" to "manually"

I once had this when I had an MMS trying to download. Delete the MMS header from your mailbox or specify the network/connection which should be used for downloading MMS.

clarksdv2 said:
My phone constantly transfers data eating up the battery. I manually turn off data on the comm page. It stays off briefly then begins again. Any ideas?
Click to expand...
Click to collapse
Check the MMS...
But the big question is... do you have push mail or perhaps a weather program?
Push especially will keep your data connection on as it is constantly polling your email...
The good news is if your are connected it doesn't necessarily mean that you are using data. If you are in a 3G area then an H icon will appear instead of the 3G icon while there is a data transfer...
If you want to stop it alltogether check out MoDaCo's NoData or the GRPS above..

No push email or other data service
I have my personal email on 30 minute retrieve increments other than that I have no other data services. My phone is just on this constant data call although no data is being transferred. This subsequently drains my battery awefully fast.

well, what is exactly the problem? is it that your pda
"is just on this constant data call although no data is being transferred"
or
"constantly transfers data" ?

More details.
The phone is engaged in a constant data call represented by 3G with the left and right arrow, however, no data is actually being transferred. The battery is draining within 8hrs on standby because the high transmit to receive ratio. Although no data is transferred the radio constantly interrogates the cell site thus throwing out unnecessary power. If I manually disengage via the communication manager, the phone will hang up the data call for a brief period, but will reengage fairly quickly. I can't find any settings that would create this situation. I downloaded the program in this post, but the phone still continues the data call. This has never happened on this phone until a month or so after installing the ROM flash with WM6, but I can't be sure if there is a direct correlation with the new flash. Thank you all for your help.

clarksdv2 said:
I have my personal email on 30 minute retrieve increments other than that I have no other data services. My phone is just on this constant data call although no data is being transferred. This subsequently drains my battery awefully fast.
Click to expand...
Click to collapse
try turning off this 30 min email and make it manual to see if this is the cause...
not sure if u have htchome weather, because it will also auto update every few hours...

http://wiki.xda-developers.com/index.php?pagename=My Pocket PC keeps connecting to the Internet.

have you checked the activesync schedule time?
furthermore goto commmanager and disable direct push. if your commmanager does not show you the icon to disable direct push, install schaps advanced config and activate there the icon.
i am pretty sure that one of these two options causes the problem.
what other apps have you installed?
if all this does not help, hard reset your device and install/config one app after another.

Same Problem
I've got the same problem. I'm using the default HTC WWE ROM. At random times, sometimes twice a day, my "Rogers Internet" data connection (GPRS, EDGE or 3G) connects automatically and doesn't disconnect. If I catch it happening and click cancel, it tries again. It will not give up until the connection has been established for at least 10 seconds.
I've gone through every program I have, checking to make sure the auto update option is disabled (if there is an auto update). I do not use the direct push and therefore, activesync schedule is greyed out.
Any ideas?

I'm suprised that it drains your battery so quickly. My phone stays connected at least 90% of the day, and I usually have at least 70-80% battery when I get home from work, usually more. The only time that it gets drained quickly is when I'm browsing the web too much on NetFront 3.5...a notorious battery drainer.
Sorry I couldn't help...but maybe it's a battery issue? Since I'm connected so much and have no battery issues? Or maybe a radio change could help you?

I don't have any abnormal battery drain, just weird auto-connect problem.

are you sure you have checked every single program? there has to be something that's trying to connect to the internet to grab data. weather apps, time sync, quickgps (i know, ridiculous, i'm just throwing it out there). try looking at what processes are running in the background using a task manager. that might help you eliminate suspects.

I have Spb GPRS Monitor on my phone. I've been looking at the logs. There is no pattern to the connections and they seem to be never more than 20k connections. I've installed NoGPRS and will use that while I'm sleeping. Just weird that it connects at all.

I had a similar problem, so I installed KaiserTweak and changed the setting to disconnect from 3G after use and that did the trick for me - no more constant connection and the battery stopped heating up and dying quickly.

How to set wifi as default rather than GPRS?

Anyway?
if better , perm disable of GPRS will be good .

Try NoData to disble GPRS. Personally I'm not having much luck with it as my TD2 keep closing it down in background.
Alternative is to deliberately set an incorrect APN so it cannot connect even when it tries.
I don't know of any method of setting a default connection type.

NoData.cab works fine in my device, but HD Tweak can do the same job, so I removed it.

Would like to do the same too, and then have my weather and emails be updated via my home network thru wireless only...
any one able to do this?

Of course you can! Using 3g or any other paying data connection when WiFi is available is simply foolish

sualc said:
Of course you can! Using 3g or any other paying data connection when WiFi is available is simply foolish
Click to expand...
Click to collapse
Done spose you would like to tell me how please...i am not that clued in with the HTC device just yet...and have used alot of my data already...which i have to pay for...
Thanks..

With pleasure:
Some people say they can deactivate gprs,3g etc within windows..but as I emptied my sim credit within a minute when I first started my Topaz, I decided not to worry anymore by installing Modaco's NoData.cab (it's free,google for it) and disabling all costly data connections from my operator. After a few days I realized that nodata.cab was no longer needed because I had also HD Tweak, who can do the same.If you use it go to point 6. and disable the 3 last settings. So it's up to you:NoData.cab or Hd Tweak...and I'm sure even others utilities work aswell.

Or you simply delete the settings for 3g conections and the software will decide to use WIFI it's avaible instead 3G (because it will not work without settings.)

How do you do that? In this case you would have to do the network autoconfig again if you need 3g etc..anyway this discussion is funny because it is rare to find a thread with multiple solutions recently....I was getting bored of unsolved problems . Cheers !

sualc said:
With pleasure:
Some people say they can deactivate gprs,3g etc within windows..but as I emptied my sim credit within a minute when I first started my Topaz, I decided not to worry anymore by installing Modaco's NoData.cab (it's free,google for it) and disabling all costly data connections from my operator. After a few days I realized that nodata.cab was no longer needed because I had also HD Tweak, who can do the same.If you use it go to point 6. and disable the 3 last settings. So it's up to you:NoData.cab or Hd Tweak...and I'm sure even others utilities work aswell.
Click to expand...
Click to collapse
If you activate wifi the wm will use this
instead 3g. right know i post from td2
and i use wifi and the gsm it is still active bu not in use

Ok, and what steps did you take to achieve this?

sualc said:
Ok, and what steps did you take to achieve this?
Click to expand...
Click to collapse
i try it right know to be sure.
I have SPB monitor instaleted to verify the traffic.
If 3G it's active and you enable WIFI the application it will use 3G.
If the 3G it's close and open WIFI the application it will use WIFI and don't open 3G.

pauln said:
Or you simply delete the settings for 3g conections
Click to expand...
Click to collapse
So it's not about "deleting" anything, you're just using another application (costs USD$19.95). May be a solution

You understand me wrong.
First solution about deleting the connection was the simplest one if you want to use only WIFI.
Second : "I have SPB monitor instaleted to verify the traffic."
I use this app ONLY to verify and to be sure were the app goes to made traffic not for directing the app.
SPB Monitor tell you if you have one or more connections how much traffic you made...
and I see what I tell you if I have 3G closed and WIFI activated the traffic was made on WIFI and 3G remain closed.
But if you have 3G connected and start after that WIFI the 3G will made the traffic.

OK I understand, may I ask you again what are the steps for your first solution?

1. if you don't want to warry about 3G connection and you don't want to use it.
-"Connection setup/menu" disable auto configuration
-"Connections/manage existing connections" and delete all the connections
- enable WIFI and all the programs will use WIFI(will be the single way)
2. If you want to use 3G and WIFI
-when you use WIFI be sure/verify the 3G connection it's closed(click on the status bar-signal strenght icon and if it's active disable it)
-afterthat enable WIFI
Otherwise if 3G it's active will be the first option for applications to acces the internet.
Try to enable Autodisconect (ADV CONFIG or HDtweak) of data connection after you use it to disconnect automatically for you.
I hope I help you.

Solution 1 doesn't work here,wasted a couple of euros ..back to my good ooold system.

i still can't disable it, i just bomb $400 for activating gprs ..
new to WM phone , so ... kinda slow .

If you only want to use wireless all the time, try the following:
Go to Start | Settings | Connections
Click on Connections icon
Click on Advanced tab
Click on Select Networks button
Programs that automatically connect to Internet should use
My Work Network
Programs that automatically connect to a private network should use
My Work Network
Cheers to SEX1 on whirlpool...

XClemX said:
If you only want to use wireless all the time, try the following:
Go to Start | Settings | Connections
Click on Connections icon
Click on Advanced tab
Click on Select Networks button
Programs that automatically connect to Internet should use
My Work Network
Programs that automatically connect to a private network should use
My Work Network
Cheers to SEX1 on whirlpool...
Click to expand...
Click to collapse
Hi, will this solution also fix my issue? My issue being:
-No dataplan, but do not want do disable/delete 3g/gsm, because I still want to use it sporadically on the road, and recieve MMS. But only when I choose to manually.
-At the same time, I want the automatic updates of weather, push-email, stock and such, but ONLY when I'm in a known WLAN.
In simple terms, I want to deny the 3g/E/H from automatically connecting, without deleting them. At the same time, wifi should be allowed to automatically connect, and update selected services.
Is this possible?

Why does my HD2 keep connecting to the internet? (on its own)

Every now and then, I notice that my phone connects to the internet (t-mobile internet). I find this strange because I've disabled everything (i can think of) from automatically updating or connecting (weather, email and msMyPhone). I have an unlimited data plan so I'm not particularly worried about the cost; however, it drains my battery fast. Just yesterday, I tapped the top of the screen to see my notifications and I noticed that t-mobile internet had been connected for over 2 hours. I just can’t figure out the cause. I've even done the auto disconnect registry tweak (auto disconnect after 60 seconds) but still no joy. If anyone can help or even suggest a process monitoring application, I’d be very grateful. Thanks in advance.

shaliru said:
Every now and then, I notice that my phone connects to the internet (t-mobile internet). I find this strange because I've disabled everything (i can think of) from automatically updating or connecting (weather, email and msMyPhone). I have an unlimited data plan so I'm not particularly worried about the cost; however, it drains my battery fast. Just yesterday, I tapped the top of the screen to see my notifications and I noticed that t-mobile internet had been connected for over 2 hours. I just can’t figure out the cause. I've even done the auto disconnect registry tweak (auto disconnect after 60 seconds) but still no joy. If anyone can help or even suggest a process monitoring application, I’d be very grateful. Thanks in advance.
Click to expand...
Click to collapse
Did you disable the rest of the services ( HTC location service, stocks, Internet time sync, Facebook, Twitter, YouTube as well ? In my case the Stock were causing unwanted connections before I figured out..

jarbi said:
Stock were causing unwanted connections before I figured out..
Click to expand...
Click to collapse
I think stock was the culprit. I removed it from the home tab from day one and as a result couldnt access it's settings. I put it back on and sure enough it was connecting every 30 mins.
Thanks alot mate. I'll report back in a day or two with the results, though I'm pretty certain it was the stock application.

If you want to be able to turn internet off so it cant connect when you dont want it to then just install the attached cab, run the program then you can enable or disable both settings as appropriate.

I also recommend to use NoData.

Just go to settings->wireless control->connection->advance->select network(choose my work connection if you havent rename it yet) If you would like to use hsdpa/edge/gprs again you will have to change it to as it was before.

mskip said:
If you want to be able to turn internet off so it cant connect when you dont want it to then just install the attached cab, run the program then you can enable or disable both settings as appropriate.
Click to expand...
Click to collapse
Got a brand new HD2 and each time I install NoData, I get an error. What should I do to fix this please?

What's the error message you are getting?
WB

str0g said:
Just go to settings->wireless control->connection->advance->select network(choose my work connection if you havent rename it yet) If you would like to use hsdpa/edge/gprs again you will have to change it to as it was before.
Click to expand...
Click to collapse
the best solution without any installation .

HD2 connection problem
Hi i have encountered the same problem my phone keeps logging into its internet for no reason , i have to disconnect it regularly . now that i have downloaded the nodata.cap how do i use it ? i have installed it onto my phone . how does this file work

feliciang said:
Hi i have encountered the same problem my phone keeps logging into its internet for no reason , i have to disconnect it regularly . now that i have downloaded the nodata.cap how do i use it ? i have installed it onto my phone . how does this file work
Click to expand...
Click to collapse
Just run nodata and then follow the on screen instructions its easy to use.
Mark.

mskip said:
Just run nodata and then follow the on screen instructions its easy to use.
Mark.
Click to expand...
Click to collapse
Even better, you can use Dial-up Enabler/Disabler: works like nodata but interface is a little better and is more user friendly ;-)

thegios said:
Even better, you can use Dial-up Enabler/Disabler: works like nodata but interface is a little better and is more user friendly ;-)
Click to expand...
Click to collapse
Pls note that with nodata, you disable the internet connection but, if the connection is active while disabling it, you still need to end it manually after exiting nodata.
This sounds weird I know...
With dial-up enabler/dsabler it is a lot easier as you will see two connections: one is the internet connection configured on your phone and the other is the current active connection, and you can disable them at the same time.
In addition it does not have annoying confirmation messages on disabling and exiting

shaliru said:
Every now and then, I notice that my phone connects to the internet (t-mobile internet). I find this strange because I've disabled everything (i can think of) from automatically updating or connecting (weather, email and msMyPhone). I have an unlimited data plan so I'm not particularly worried about the cost; however, it drains my battery fast. Just yesterday, I tapped the top of the screen to see my notifications and I noticed that t-mobile internet had been connected for over 2 hours. I just can’t figure out the cause. I've even done the auto disconnect registry tweak (auto disconnect after 60 seconds) but still no joy. If anyone can help or even suggest a process monitoring application, I’d be very grateful. Thanks in advance.
Click to expand...
Click to collapse
how do u do auto disconnection tweak

HD2 connection problem
Connect your HD2 to your computer and transfer the cad file to your mobile.
Find the file on your phone using File Explorer (on the phone).
Double click on it and follow the instructions.
Then go to Start and locate the nodata programme.
Start it and disable what you want.
I disabled the Orange (in my case) internet connection and WAP.
In my case it is crucial that I donet't g automatic access to internet services when I roam because I am on a PAYG tariff.
£20 last me up to three months normally with a different phone (SIC) and since I started using my HD2 my last top up lasted me less than a week.
It's a rip-off!
Once beaten, twice shy...
I won't be caught again!
Hope this helps
Djam2011

Data connection, no auto-disconnect?

Hi guys,
I have recently moved from symbian platform to WinMo. I do have a question regarding data connection. Does it ever auto disconnects? (for example in my old N95 if I clicked sync in my mail application, the phone would connect, download new mail and then auto disconnect when the job was done)
Also the phone would disconnect from data connection after closing app that was using it.
Now with my HD2 when I sync email, refresh weather etc the data connection stays on. Do I have to disconnect it manualy every single time so it doesnt drain my battery? It is very annoying since I have to do it manually very often.
Please advise... maybe I am missing something...
Cheers
Pete

Hi,
There's a few threads on here on data connection disconnection. There is also a hints & tips thread right at the top of this page.
Use this tool to find what you are looking for..http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
WB

install the 1 min disconnect tweak thats on this forum.
if you only set emails to check automatically it will disconnect ok using the above tweak but if you have weather and/or twitter apps connecting to update for some reason it will not close the connection at all i have told htc but never heard back

The only real reason for disconnecting a data connection is if you want to prevent unwanted costs associated with data exchange.
If you're in a weak signal area you can save battery by switching the connection band to GSM rather than 3G, but in a strong signal, 3G is more power efficient.
An open, but quiescent data connection has little or no effect on battery life as it's simply using the network infrastructure; battery usage only occurs during actual data exchange. So, if you turn off all the auto-update features and set email polling to a longer interval you should be OK. Kind of defeats the purpose of the device though

NeilM said:
The only real reason for disconnecting a data connection is if you want to prevent unwanted costs associated with data exchange.
If you're in a weak signal area you can save battery by switching the connection band to GSM rather than 3G, but in a strong signal, 3G is more power efficient.
An open, but quiescent data connection has little or no effect on battery life as it's simply using the network infrastructure; battery usage only occurs during actual data exchange. So, if you turn off all the auto-update features and set email polling to a longer interval you should be OK. Kind of defeats the purpose of the device though
Click to expand...
Click to collapse
From my experience all Symbian devices and the iPhone auto disconnect from the network once the data connection is no longer needed. They also reconnect in the blink of an eye. It kind of irritates me that Windows Mobile doesn't allow you at least the OPTION of doing so. It's particularly annoying if you're connected to a speaker and can't get 3g as there's a constant noise going off. I also think it can't be great for your balls having that connection constantly active! It's not HTC's fault though, just I think a result of Windows Mobile being inherently quite archaic...perhaps Windows have just overlooked it.
There's a great free app HERE to tweak the WinMo connections for individual apps. It's a must have for me.

petexx said:
Hi guys,
I have recently moved from symbian platform to WinMo. I do have a question regarding data connection. Does it ever auto disconnects? (for example in my old N95 if I clicked sync in my mail application, the phone would connect, download new mail and then auto disconnect when the job was done)
Also the phone would disconnect from data connection after closing app that was using it.
Now with my HD2 when I sync email, refresh weather etc the data connection stays on. Do I have to disconnect it manualy every single time so it doesnt drain my battery? It is very annoying since I have to do it manually very often.
Please advise... maybe I am missing something...
Cheers
Pete
Click to expand...
Click to collapse
This really isn't a problem, I've seen N95's that retain their connection at all time (and some that don't) and to be honest it just makes your handset a little quicker.

WMLongLife is the nuts. You need it.

Thanks for the link, I pay per minute on my connection (rather than data transferred) so an open connection is not good for my bank balance

data connection

how can i do that my data connection stay alive when i standby the device?
(for example holding icq or fim working in standby)
i found something that does exactly this with WiFi but not with data connections...
http://forum.xda-developers.com/showthread.php?t=636656 in this thread the seventh app

When you say data connection do you mean Wifi?
To keep wifi you can use any register editor (SKTools for example). Then search for this entry "HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms".
When you've found it look for a key named "HTCKeepWifiOnWhenUnattended=0" and modify the 0 and type 1. It must be like this: HTCKeepWifiOnWhenUnattended=1
I did this way and it worked. Anyways if you are not sure how to do it you can search for a .cab "WiFi Stay Awake" that do the step above.
You must be aware that use this trick to enable wifi while staying in "stand by" drains your battery faster and depending how much you use your htc mega won't last for a day. Hope this help

no i dont mean wifi i mean the internet connection
on german its called "Datenverbindung" in english this would be data connection that why i wrote that
but i mean the internet (GPRS/EDGE/HSDPA)
the connection closes when i lock my phone and turn display off (standby i guess)

Oh, I looked at the 7th app and saw "7th cab - Makes ur WiFi stay awake when the phone get's locked , usefull when using Skype(or similar) or dont want to connect/disconnect/reconnect every time u leave it for a minute and it goes in standby". That's why I thought that.
I'm not sure then because I don't use data connection but maybe there is an entry like the "HTCKeepWifiOnWhenUnattended". Try to look @ it.

ok i searched but didn't found anything...

nobody any idea?..

Spacii said:
nobody any idea?..
Click to expand...
Click to collapse
Try these two applications.

these 2 tools are only to disable the GPRS/EDGE/3G connection...
i want some help keeping the connections alive when i turn of my phones screen....

still having this issue :/