Hi!
Recently I Bought a XDA-II and now i want to use it with my Sony Ericson HBH-15 bluetooth headset but XDA doent pair with it...
Kindly guide me in how to overcome with this problem or XDA doesnt support this pirticular models..
----
Sanjeev K Purohit
Had the same problem with my HBH-10, but found the solution.
You have to pair your HBH-15 with a Ericsson Phone, and then change the default passkey 0000 to a diffrent one, and then it should pair with your XDA II.
How to do so, check here
wormeyman.com/downloads/HBH10-R3B-EN.pdf
under 'changing the passkey'
A NEw Problem Now!!!
Thnx a lot bro!
But Now thr's a new problem..
Untill using MS bluetooth stack the call used to get transferred to HBH-15 but since I've installed Widdcom Bluetooth stach The widcom can pair with HBH but cant connect..
When I turn it Off and turn On MS bluetooth It transfers the call occasionally may once in five times...
Isnt thr a sure shot way(kinda some tool that will transfer the call to headset straight away...
Regards
Sanjeev :arrow:
yeah, but that's still the problem that no one got the Widcomm stack working a real 100% reliable. I know tha MS BT sucks because of the many missing profiles, and even worth it's not very 'stable' on my Magician, but still the best option. Sorry mate, but you probably have to live with it the way it is.
I've been looking around these forums for a while now trying to find a solution to the Orange/rSAP issue, and have finally found a solution...
I've basically just combined the instructions from various posts about various things to make this work, so i'll include all the info i found and try to credit people where necessary - apologies in advance if i've forgotten any, but i looked through so many threads and pages it was unbelievable!
Anyway, this is basically a step by step for getting your Orange SPV M3100 (and probably any Hermes/TyTn variance that has had remote SIM access removed by the provider) to work with a rSAP enabled accessory (the VW Passatt Bluetooth Premium kit in my case).
First, you need to change the TyTn's bluetooth identity to be a phone, or the rSAP accessory will not recognise it (funnily enough, bluetooth rSAP car kits don't look for pocket PCs). Here's how:
Download PHM RegEdit - it is important to use this exact program as due to Orange's stupid application locking it is the only registry editor i have found that can be installed.
Next, edit the following value:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S]
"COD"=dword:52020C (hex)
Bear in mind the new dword is a Hex value, so be sure to select "Hexadecimal" from the Base menu.
For reference (in case something messes up), heres the original value (the Pocket PC identifier):
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S]
"COD"=dword:1048852 (decimal)
Next, soft reset. For some reason i had to restart, change the value again (as it had reset itself), backup the registry and soft reset again for the change to take effect. God knows why, couldnt be arsed to figure it out.
Once this is done, you need to unlock and mount the phone's ROM. The easiest way i've found to do this is using the Fit4Cat Hermes Tweaker. The download will most likely require a forum signup, but its free so what the hey...
Use the hermes tweaker to unlock and mount the ROM, save and restart.
When the TyTn has restarted, if its worked you will see an Extended ROM volume in file explorer.
These files need to go in there helmi_c's SAP Test cab (you will need to unRAR first).
This was taken from the following thread: Helmi BA WM2k5 AKU3.2 Beta (v.1.3 Beta)
Cheers for that, helmi! You are a genius
After that, restart. If you do NOT have a new application in your Programs directory called SAPSettings, go into your Extended ROM and install helmi's btsap_test.cab file manually, then restart.
You should now have SAPSettings working fully:- just go into the app, click the enable button and away you go!
I hope this works for everyone, its worked on the 3 M3100s and the O2 XDA Exec ive tried it on so far with no problems so hopfully all is good.
Please post up your results here - itd be good to know the outcome
Cheers,
-JD-
Thank you
At last - I too am trawlling through these forums trying to put together a SAP package for the M3100.
Just one thing for the amateur here - how do you "unRAR" a file???
Thank you
p.s. I dont suppose you know if this will work on aC600 too??? I'll try it when I get a moment..
Better get a CIngular ROM and u hv built in SAP app
hdubli said:
Better get a CIngular ROM and u hv built in SAP app
Click to expand...
Click to collapse
That may be, but not if your pocket pc is company owned.
I should think that a lot of people wanting rSAP will have businessmobiles and probably business phone contracts too. Installing non-orange ROMs on an orange business contract pocket pc is NOT a good idea...hence this way around.
Theres always a reason
p4uly said:
At last - I too am trawlling through these forums trying to put together a SAP package for the M3100.
Just one thing for the amateur here - how do you "unRAR" a file???
Thank you
p.s. I dont suppose you know if this will work on aC600 too??? I'll try it when I get a moment..
Click to expand...
Click to collapse
To unRAR....get a copy of winRAR to unarchive the package
and i should thing the aC600 would work too as long as its on a WM5 Orange ROM.
Cheers,
-JD-
Same Problem with my VPA3 compact III and FWD Audio com
Hi all,
i´ve the same problem.
My CarKit "FWD audio com" won´t connect via SAP with my HERM200 Vodafone 1606 VPA 3 compact III. It always connect via 4 Char Code for talking. SAP Code (16 Char´s) won´t ask and so i´m not able to use the SAP-functions
I tried like the instruction from above.
At first I had the unrar-Problem with "helmi_c´s SAP Test cab".
Everytime you save it to disk, it´s not able to unpack.
If you don´t save it to disk and if you installed WINRAR, just
OPEN it und unpack it via WINRAR to HD ! Now it works.
Back to my Handy and the instruction
I was able to install everything, but if I start Install of "helmi_c´s SAP Test cab" in the Extended ROM there will be a message, that I don´t have rights to install !
I don´t know if the instruction will fix my problem nether the File is for my Fone, but I´ll try.
Does anybody can help me and answer why my phone won´t install "helmi_c´s SAP Test cab" ?
Can Cingular, which I don´t understand, help me ?
Fone: HERM200 Vodafone 1605 VPA compact III
Fone-ROM: 1.20.162.3
Car Kit: fwd audio com
I have a T-Mobile Vario II, and am looking into buying the Sony-Ericsson HCB-700 carcit. I have SAP settings in my programs, will it work ??
Scholle2 said:
Hi all,
i´ve the same problem.
My CarKit "FWD audio com" won´t connect via SAP with my HERM200 Vodafone 1606 VPA 3 compact III. It always connect via 4 Char Code for talking. SAP Code (16 Char´s) won´t ask and so i´m not able to use the SAP-functions
I tried like the instruction from above.
At first I had the unrar-Problem with "helmi_c´s SAP Test cab".
Everytime you save it to disk, it´s not able to unpack.
If you don´t save it to disk and if you installed WINRAR, just
OPEN it und unpack it via WINRAR to HD ! Now it works.
Back to my Handy and the instruction
I was able to install everything, but if I start Install of "helmi_c´s SAP Test cab" in the Extended ROM there will be a message, that I don´t have rights to install !
I don´t know if the instruction will fix my problem nether the File is for my Fone, but I´ll try.
Does anybody can help me and answer why my phone won´t install "helmi_c´s SAP Test cab" ?
Can Cingular, which I don´t understand, help me ?
Fone: HERM200 Vodafone 1605 VPA compact III
Fone-ROM: 1.20.162.3
Car Kit: fwd audio com
Click to expand...
Click to collapse
Did you install the Fit4Cat tweaker? Have a play with the options in it - from what i can remember, theres an some options about being able to install non-signed apps and rights.
If that doesn't work ill have a look for you.
Churchill said:
I have a T-Mobile Vario II, and am looking into buying the Sony-Ericsson HCB-700 carcit. I have SAP settings in my programs, will it work ??
Click to expand...
Click to collapse
Depends entirely upon whether the HCB-700 uses rSAP or HFP (hands free profile) to connect to your vario....
If it uses rSAP then chances are it will work, but without having used your exact kit i can't say for definite i'm afraid.
-JD-
Thanx for the info
OK - I have tried to load the fit4cat tweaker to the c600 - it doesnt work - neither does my regedit software - so it requires more cunning.
With the M3100 I could not load the PHMRegedit - instead i used Vidya which seems to have worked.
The car kit I am trying to pair with is a mercedes MHI - it has worked with my Nokia 6230i up until now.
The regedit doesnt have a HEX function but converting 52 02 0C into DEC I get 5374476 - however looking at the original post it could be 5202C - which means 335916.
I have tried 335916 - and at first the car kit sees it - dials the long number in-order to pair with the phone - but then dies. after a few attempts the car kit stops to see the phone.
I have asked some colleagues to try this with their Bluetooth Passats - I will report back on this later.
Also I will now go and try 5374476.
With helmis test CAB - I only got on cab file after un-rar'ing it. is that OK? also is it the latest version of the file?
Thanks
p4uly said:
OK - I have tried to load the fit4cat tweaker to the c600 - it doesnt work - neither does my regedit software - so it requires more cunning.
With the M3100 I could not load the PHMRegedit - instead i used Vidya which seems to have worked.
The car kit I am trying to pair with is a mercedes MHI - it has worked with my Nokia 6230i up until now.
The regedit doesnt have a HEX function but converting 52 02 0C into DEC I get 5374476 - however looking at the original post it could be 5202C - which means 335916.
I have tried 335916 - and at first the car kit sees it - dials the long number in-order to pair with the phone - but then dies. after a few attempts the car kit stops to see the phone.
I have asked some colleagues to try this with their Bluetooth Passats - I will report back on this later.
Also I will now go and try 5374476.
With helmis test CAB - I only got on cab file after un-rar'ing it. is that OK? also is it the latest version of the file?
Thanks
Click to expand...
Click to collapse
The reason you wont be able to get PHMRegedit and Fit4Cat to work is the fact that you're on a c600 rather than an M3100....
Anyway...the dec you're looking for is (as you stated you were going to test) 5374476 so that one should work...
What you need to do now is have a forum search for unlocking the Extended ROM on the c600 and the follow the instructions from there.
You should get a .cab file and a folder from the unRAR...
Yes this is the latest version of the file and works fine
-JD-
Testing
Right - have tried with both DEC values for the bluetooth and they both seem to work. Good so far.
Further Good News - It works with the Passat Car Kit - excellent
However when it comes to pairing with the Mercedes device (essentially a bluetooth dongle that plugs into where the phone cradle normally goes) the phone does not respond to the Car Kit when it dials the pairing number.
So I guess I'll post this on Helmis thread and see if there are any more tweaks...
where can you get a cingullar ROM from? has it been tried on a Hermes 100?
any luck
did you have any luck finding out how to pair with the mercedes bluetooth dongle. I can get Comand to see the device but it does not pair.
Mercedes Car Kit Not Working
Sorry - the Mercedes MHI (European variant) does not want to pair!!
I have tried my phone - with the tweaks in a VW passatt Bluetooth car - and it works.
I have tried my phone with a BMW I drive - and it is fine.
It also works with the Audi Bluetooth and a Nokia and Parrott Bluetooth kit.
So Mercedes have done something very odd with their kit....
And whats more infuriating is that there seems to be no way of asking mercedes techncial questions without the answer "that phone is not shown as compatible in the list".
Currently I am using the phone in speaker phone mode and have a pay as you go sim in the car kit for outgoing calls.
Apparently the U.S. Version of the MHI dongle is different - but I have not found anyone out there who has tried this threads update on a U.S module.
Oh well - here's hoping Orange release a ROM update tht comes out to update the phone in the future.
thanks for your reply
Doing the same with my T-Mobile phone and using a pay as you go sim in the car.
Really annoying.
I can't get it to work with the new Audi system. Have an Audi Allroad manufactured 10/06 with the new PT4 telephone system and a HTC Tytn.
Pairing it with the handsfree profile works and I can make calls and access the contacts in the Tytn.
Pairing it with the SAP profile also works but I do not get any network and can´t access the contacts in the Tytn. Tried changing [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS]
"COD"=dword:52020C (hex) but I get the same results. Have not tried the other tweak since I already have "SAP Settings" under programs.
Any ideas about what to do?
UPDATE: Tried manual network selection from the car and was very surprised when my network "Vodafone Sweden" showed up as available and some other networks as not available. When I choose "Vodafone Sweden" it tries to connect and then says "Network error". Could it be a problem with SAP and Vodafone Sweden? Will try my wifes sim when she comes home.
please has anyone found a solution to pairing with a Mercedes device?
Sorry
Sorry - No..
Although your phone says it has SAP already the file atached on the first page of this thread is an upgrade to the Bluetooth Stack - so please try with the file (you can always remove it if it doesnt work).
Hopefully that should then work.
Are there any particular functions you want to use via SAP that you cannot do with Headset Profile??
When I tried another sim (Telia) it worked! Talked to Telenor/vodafone and they said I should ask the car or telephone manufacturer what type of sim I should have, Telenor/vodafone has several different sims.
I want to use SAP to get use of the outside antenna for better reception an no "radiation" (don´t know the word) inside the car. I also want to use the separate bluetooth handset that can´t be used when using handsfree profile.
Do you think the other bluetooth stack can help me get the contacts in the Audi phone?
Update: tried to install BTSAP_Test.cab manually but it says that installation failed since it doesn´t have enough authority in the system. Have mounted and unlocked extended rom with Fit4cat Hermes Tweaker and soft boot but it doesn´t work.
Hi, I have a question if anyone here has tried to get the TyTN and Nokia´s new BT-handsfree BH801 to work?
TyTN finds and connects to the BH801, but they dont seem to work.
It all seems to work correct, activationcode is filled in, use as hansfree is activated.
Anyone got a solution??
Thanx!
By the way, NOKIA support says that the BH-801 only supports;
Bluetooth 2.0, 1.2 and 1.1 specification,
Handsfree 1.5 (HFP) and headset 1.1 (HSP) profiles.
Erik_S said:
Hi, I have a question if anyone here has tried to get the TyTN and Nokia´s new BT-handsfree BH801 to work?
TyTN finds and connects to the BH801, but they dont seem to work.
It all seems to work correct, activationcode is filled in, use as hansfree is activated.
Anyone got a solution??
Thanx!
Click to expand...
Click to collapse
I could not give you an answer to your problem, but can only let you that the Nokia HS-12W works great on the new AKU 3.3 ROM's. I have the WWE version on my TyTN and the only change I had to make was to activate the stereo setting in the A2DP registry.
Previously I had great deal of problems getting the same headset to work on the SA ROM 1.35. Bitpool changes in the registry as well as Sleuths A2DP fix were necessary.
By the way I have also had amazing results with the HTC BH S100 Bluetooth stereo headset. The great thing about this device is that it allows the user the option to use their own favourite 3.5mm headset.
Regards
Hi, and thanks for your reply.
It´s seems a bit tricky to get it working, fiddeling in the program isnt something as I would prefer getting in to, as I´m a noob!
But can anyone see if the profiles that NOKIA demands is supported in TyTN?
And if so, how can I get there??
By the way, I have a swedish TyTN with following setup;
ROM-version: 1.18.263.2
ROM-datum: 07/22/06
Radioversion: 1.07.01.10
Protokollversion: 32.40.7010.02H
ExtROM-version: 1.18.263.104
Thanks!
Hello all, I have upgraded to Sharps 4.0 but the bluetooth in teh car still does not work. Carkit finds the phone and calls to connect, however there is no answer from the phone to give the code.
Can any body help. This did not work with original WM5 from T-Mobile and still does not work wit WM6
Thanks in advance for the answer to solve this problem
I have a similar problem with my TyTN and Pioneer DEH-P75BT, and i found this post...
http://forum.xda-developers.com/showthread.php?t=290871&highlight=P75BT
With this changes in registry, my TyTN connect with headunit tottaly correct.
hi everybody
I have a problem to connect my Universal with my Parrot 3200LS color car hands free.
My Universal has a WM6 cooked Rom (FLA242 V1.0) with a Radio Rom 1.18. I had the same problem with the stock Orange Rom (main and radio), that's why i have upgraded to WM6, thinking it will resolved my problem....
Description of the problem : i turn on my car, the Parrot turn on and give me a pin code. The Universal ask me if i want to connect it in BT, i agree and input the pin code. That's ok, the Parrot download my contact and i can use the phone. When i come back later in my car, i turn on, the Parrot don't recognize my Universal and give me a new pin. Or it connect with my Universal and cut the link when i want to use it.
I precise that this Parrot turns perfectly with my previous smartphone (BlueAngel) and my wife's basic Nokia too.
Is there anybody who i have had the same problem ?
Is it a radio rom problem ? (i have the problem with my new one and the stock one !)
thank you for your answer