Database Users

recently rooted phone, troubles installing roms

I've been reading these forums for quite some time folowing H's and JF's builds and just seeing what the devolping community has been up to.
I've been wanting to root my g1 for some time but didnt ever make the jump till now. I read through the Helpful Thread / Build Round up started with in the beginning there was root as well as the How-to- Root, Hack, and Flashing your G1/Dream and decided i could do it. i followed all of hte steps with ease. had my phone rooted within 20 minutes the first thing i wanted to do was to get a new rom with cupcake but i also wanted to be sure not to mess it up so i read through nandroid and was a bit confused as to what all was needed so i figured the recovery img that the tutorial gave was fine since everything i had done was no problem. i then went to H's ion thread and saw that i needed a differen spl so i went and read about those and decided with hardspl got that applied no problem. i downloaded the ion rom renamed it to update.zip put it on my card and loaded up recovery mode pressed alt+s to apply it and everything went fine till it hung at the 2nd boot screen. a little disheartened i went into the spl using camera+power and flashed the recovery img. i read around the forums seeing if i did anything wrong and couldnt figure it out so i tried a different rom this time one of Jf's early roms i think it was rc33 i tried to apply that but i got a no signature verication failed at the recovery screen so i tried some others. JF's 1.51 and same problem. i read around some more and thought maybe it was because i didnt do alt+W so i tried that with JF's roms and both of the leaked hero roms (i know hero is extremely unstable but i just wanted to see if something entirely differnt would work.) by this time i go into the spl again and saw that the hard spl wasnt loaded any more (i guess the recovery img changes that) i reloaded the recovery img once more and tried to install a the 2nd Ion rom with H's root apps and still the same problem.
i really try to read and search before posting but after 4 hours of nothing i really just want some help. if someone could help me get a working rom on my phone preferably H's new Ion rom and tell me what im doing wrong i'd be endlessly great full.

Im guessing what happend was you did the switch of releasekeys to testkeys and then later redid the DREAIMG.nbh. If so you need to redo the steps involving testkeys. This is why it gives the no signature verification error.
In fact id suggest redoing the whole root process again. starting with the DREAIMG.nbh.

Rooting Mytouch3g 32b(t-mobile/voda) Without goldcard

Guide To rooting mytouch 3g 32b (Even if you have 1.6 update)
Propz to:Amon_RA, andreev2001, Cyanogen, and any one else sources I used
Ok after Searching the forums and finding all types of ways to root a Mytouch and having some/no luck I decided
to created a thread that goes into complete detail(or try to at least) about each step that is guaranteed to work if done correctly.
READ
This guide does not require a goldcard or adb . I am also not responsible for bricked/broken phones. Now since that's out of the way happy rooting!!
IF your phone is currently running 1.5(cupcake) already then skip to step 3
1.First of all we can't really do anything with 1.6 so we must downgrade to 1.5 by downloading this sappimg.nph and installing it
2.Once downloaded put it on your sdcard and reboot and go into hboot mode (Hold END+VOLUME DOWN). Preform the update
3.Once update is COMPLETLY finished and it asks you to reboot. Do so, then load your phone up fully and download this apk here (flashrecovery.apk) then run it.
Skip these steps and go to step 4 if you know how to install a apk
3a.to install this apk you have to enable the install unkown source in your settings. To do this hit menu >Settings>Applications>Unkown Soruces(check this).
3b. After this go to the market and download a app called "Astro" (the description should mention somthing about file manager) or you could use another apk installer but I prefer this one.
4. After installing the apk run it and click on “backup recovery image” let it do what it does then click on “Flash Cyanogen Recovery 1.4″.
5.Once that is done you want to download the SPL by clicking here, then put it on your sdcard. After that download any ROM(If you dont know what a ROM is search, I cant tell you everything ) of your choice and rename it "update.zip" without quotes then place it in your sdcard
6.Reboot your g1 and hold down the "HOME" key and it should bring up the flash image recovery screen. Choose apply any zip from sd and then choose "update.Engineering-SPL-HBOOT-1.33.2005-signed.zip". It finishes almost immediately with message saying successfully flashed(if it doesn't you prolly ate to much chicken ).
7. Then after it is installed select the restart option and then load into fastboot mode (Hold "BACK" arrow key while its restarting). Once fastboot is loaded the SPL info should say HBOOT-1.33.2005 (SAPP30000). If it does congrats almost there!!!!! If it doesn't, you did somthing wrong and you need to retrace you're steps.
8.Exit fastboot by hitting the "GREEN" button and before the phone boots up hold the "HOME" button and then go to "apply sdcard:update.zip". Let it install and VOL LA you installed your ROM. Preform a reboot and you will now have a rooted phone with a custom ROM

1) thanks for posting, ive tried to follow other instructions over the past few days to no avail
2) any chance of hosting the sappimg.nph file somehwere else? I cant access rapidshare from my phone. I would greatly appreciate it.

OMG SOOO EASY!!!! Mods should sticky this as the new root / rom upload process
I was running android 1.6 on tmobil mytouch 3g with perfected spl 1.33.2006

@ascis sure ill host the files on my website later (im not @ home right now)
@nonmindo thanks and i hope u had a easy time rooting

@ascis sure ill host the files on my website later (im not @ home right now)
@nonmindo thanks and i hope u had a easy time rooting

Thanks for posting - much appreciated. Can I ask what the benefit of changing the SPL is? Is this required?
My concern is regarding warranty - if I flash a new SPL, it is my understanding that I will not be able to flash my current one back, and hence return the phone to stock if the need arises.

ParanoiaPersonified said:
Can I ask what the benefit of changing the SPL is? Is this required?
Click to expand...
Click to collapse
Yes, it is required. You cannot root with the MT3G SPL, so you need to change the SPL.
ParanoiaPersonified said:
My concern is regarding warranty - if I flash a new SPL, it is my understanding that I will not be able to flash my current one back, and hence return the phone to stock if the need arises.
Click to expand...
Click to collapse
You can flash it back to the original SPL. You would then be unrooted. Look at Amon_RA's original rooting process with Gold Card. At the bottom, he gives directions on how to return your phone to the unrooted state in case you need to do that.

Thanks, I thought with one-click-root, once you'd got the recovery rom flashed, you were done - that you had root and could flash what you liked.
For the record, I'm Voda 32B, but have perfected SPL .0007.
[EDIT] Yes, that thread has a file to return to stock, but only for MT3G, which is why I am hesitant to flash a new SPL to my device.
I've still seen in lots of places mind, that suggest this process works without the flashing of a new SPL. Such as: http://www.ryebrye.com/blog/2009/08/16/android-rooting-in-1-click-in-progress/
[EDIT]

What happened to the ability to format and
and put partitions from the recovery? I just got another Mytouch and rooted it and no ability to put the partions from the recovery mode? I think I had version 1.2 and now I have 1.4

FenderGuy said:
and put partitions from the recovery? I just got another Mytouch and rooted it and no ability to put the partions from the recovery mode? I think I had version 1.2 and now I have 1.4
Click to expand...
Click to collapse
You still can, but not with the recovery img ur using wirch is cyanogen 1.4. Just flash amans new recovery img and you will be able to partion

4. After installing the apk run it and click on “backup recovery image” let it do what it does then click on “Flash Cyanogen Recovery 1.4″.
backup failed:I received that could not run command

cparekh said:
Yes, it is required. You cannot root with the MT3G SPL, so you need to change the SPL.
Click to expand...
Click to collapse
I have rooted my myTouch3G with the 1-click method (twice actually, needed to take it to the store), and I have the perfected SPL 1.33.2006.
The main issue with this SPL is that it does not allow you to use fastboot. As far as I know, this has nothing to do with root access.

Can confirm that I've performed the OP's procedure but *without* flashing a new SPL, and everything is working fine.
Now running CyanogenMod 4.2.2 w/ CM Recovery 1.4.

Does anyone have the link to the partitions recovery? I tried to put the Hero recovery on and it does not want to come on and I still show the Cyanogenmod v1.4 +jf....someone help
Also in the top it has Andriod system recovery (2)? I did it twice, how do i take one off?

kryptik06 said:
@ascis sure ill host the files on my website later (im not @ home right now)
@nonmindo thanks and i hope u had a easy time rooting
Click to expand...
Click to collapse
Any word on rehosting? I know its a pain but my phone is my only internet connection.

acis said:
Any word on rehosting? I know its a pain but my phone is my only internet connection.
Click to expand...
Click to collapse
here you go sorry for the wait
http://www.4shared.com/file/145083511/5ffeb21d/SAPPIMG.html

vodafone htc magic 32b gives error to ur method
error "update fail model id incorrect "
i think this sappimg is for the mytouch and not for htc magic vodafone. so it gives this error.
do you have any solutions for this.
thank you

kryptik06 said:
here you go sorry for the wait
http://www.4shared.com/file/145083511/5ffeb21d/SAPPIMG.html
Click to expand...
Click to collapse
Flashed last night, worked perfectly. I had no idea it was going to be this much faster. Thankyou.

I am looking for a rom that has a wifi tether app!
yes I am to the step where u download a rom and I am looking for a rom that has WIFI TETHER for my laptop...
much will be appreciated if u can help=D
- THANKS

well i guess right now i just want my phone rooted...
i just want a rooted phone cuz i can download a wifi app i just need a rooted phone....thanks for your post though....much much much much appreciated...nice and simple...other post or vids ive seen go to far in to detail about it and i forget what step im on .lol
-THANKS

Need help I have tried everything

Hi guys, I'm pretty new here so I hope someone can help me.
I am having serious issues trying to load ANY new ROM onto my missus HTC Vodafone Magic 32B Details -
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0004 (SAP10000)
CPLD-10
RADIO-2.22.19.26I
Apr 9 2009,23:30:40
Since getting the phone second hand from eBay it has played up like nothing else, it now will not even boot into the OS, I’m pretty sure the guy I bought it from, who I cannot get in contact with, stuffed something up when he unlocked it for different carriers. But I'm positive it is an OS issue and not a straight hardware fault.
Anyway I have spent about a day and a half mucking about on here trying things and reading a HEAP of stuff and I just can’t seem find a definitive answer to my problem.
I have tried installing many different roms:
Qteknology Hero (WWE Dump) for G2 Magic-Voda 32B v1.7 Swap
Qteknology Hero (WWE Dump) for G2 Magic-Voda 32B v1.6 Swap.zip
st0kes-v1.4.1
HTC_Magic_Vodafone_AU_Original_ROM
and a few others I cannot remember.
I am using Amon RA recovery ROM, I have rooted the phone based on method 2 in the magic rooting wiki (everything went smoothly), I have updated the SPL to version 2005 which are all the apparent pre requisites for performing this kind of operation.
Anyway down to the problem every time I try and apply a ROM, by renaming it to update.zip, copying it to the root of my SD card, then loading up RA recovery ROM and going to flash zip from SDcard I get the following messages:
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Install from sdcard...
finding update package...
opening update package...
verifying update package...
E:corrupt file:
<various file names based on which ROM I’m trying to use, always the same one on each ROM though>
E:verification failed
Installation aborted
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This is starting to drive me insane, I really need to get ANY usable ROM on there I don’t care which one, otherwise I have a AU$400 lump of useless technology.
Any help people can provide me with be unbelievably appreciated.
Thanks in advance

i cant guarantee i can help, but i will try to see if i can, or also help wit some research for ya
first, what version of amon ra are you using???
2nd, do you know if you got 1.5 or 1.6 firmware???
idk too much about firmware, all i know is my mytouch was cupcake when i got it (1.5) then updated to 1.6 ota...
also are you making sure that you wipe before you try to load the roms???

Hi mate, thanks for getting back to me so quickly
The version of amon ra i am using is recovery-RA-sapphire-v1.6.2G.img this seemed to be the right one as i have a google branded phone
I am not sure what version of firmware i have, is there an easy way to check? the only real details I have is what i get from the fastboot screen as i posted above
And yes I am definately wiping the phone before I install the roms, every single time
Thanks

well i just did a few searches and i couldn't find out how to check the firmware...
i dont want to tell you to try something and then crash your system, but...lol...
i would try to "Unroot" the device, basically placing it back to 1.5 firmware and then you can "Root" it yourself.
if you want to try this here is the link for the 1.5 software
link for tutorial:
http://theunlockr .com/2009/08/22/how-to-unroot-your-mytouch-3g/
link for file:
http://www.megaupload .com/?d=BLM4EDGE
no space in the url tho...
all you have to do is,
boot into recovery
go to wipe, and wipe the top three options
go back to the main screen and select Usb-Ms toggle
then plug your device in via usb
and drop the file to your sd card. (not in a sub folder)
then safely remove your phone from pc
then press home on your phone to disable usb
then choose power off.
now to turn it back on,
holding Volume "Down" + "Power"
DON'T PRESS ANYTHING YET
after it reads the image it should show at the bottom, Action:yes, and then click trackball,
let that run all the way thru, and make sure you have enough battery juice, for this to run all the way thru.
when it's complete it will ask if you want reboot, then click Action for yes (trackball)
i believe that should unroot your phone but PLEASE PLEASE PLEASE
do as much research as possible and also question others about this method and see if you can come to a conclusion in which you are satisfied.
as always, i am in no way responsible for the Bricking or Exploding of your device...
here is a link that has great tutorials & and also you might want to check youtube, thats where i findout how to alot of things...

Um, you already have amon ra recovery on there. I assume you've already bought it rooted?
You can only check the firmware by booting up your phone and going into settings. Since you've wiped and aren't able to install a rom, you aren't able to use the phone right now, am i correct?
sanman1185, I'm glad you try to help but you gotta get more info from him first. Cause if he's already rooted, doing what you're telling him to do won't make much progress. Edit: Ok, he's already rooted. You're just telling him to do what he's already done? And he doesn't have any firmware because his phone lacks any rom right now.
Anyways, answer some of those and don't be too worried about bricking your phone. The main reason that people brick their phones is when they touch the radio and SPL.
Edit: Ok I just read that you rooted your phone so you don't need to "unroot" and root it again.
You also put on SPL 2005 instead, so post your boot info again. I assume it's an ENG SPL too, if you haven't found a solution, send me a PM and I'll help you on google talk / MSN or something.
Ps. You don't have to rename the roms to update.zip, his new recovery allows you to flash w/e zip you want. Try another SD card as well, maybe that'll help? but if not, yeah just pm me

KAwAtA - def. understand what your sayin, only reason i was thinkin to unroot and start fresh is cuz, when i started flashin roms, i ended up being stuck on the boot screen for over 30mins. pulled the battery, then read somewhere to partition sd card, then that wiped the zip from my card, lol...so what i did instead of placing another rom on the device, is "unrooted" and started fresh from the start. my theory is if you think your "Jack'd" then start from the beginning and find your mistake.
and if he did unroot and it ran Cupcake on device, and actually loaded wouldn't that have been making progress??? since he couldnt get it to load in the first place???
like i said just a thought, theory, or 2centz (sense)...
but again, i'm glad someone actually responded with a diff method or with additional ?'s, so this way he can get answers from all angle's ya kno...
and if you guys do figure this nifty lil'thang out, could you post what you guys did on here, so myself or future ppl'z that may run into this can have it as a ref??? thnx... Pce

Issues with (re)flashing recovery

Hello all,
Here's what happened - I DL'd the app 'ROM Manager' from the Android Market, installed and allowed this app to be the recovery for my MT3g (non-Fender and non-headphone jack version).
Suffice it to say that the ROM Manager app jacked up my phone... none of their items worked for me. I uninstalled the ROM Manager and now when I tried to go to recovery mode (power + Home) I get nothing but stuck on the MT splash screen
My phone is rooted, originally ran the recovery-RA-dream-v1.6.2 recovery and am currently running a 2.1 ROM.
I have tried to redo the flashrec-1.1.3x and this does not work.
Where do I go from here? I'd like to be able to partition my new 8GB SD card and I can't even do that...
Thanks in advance.

If your phone is rooted, can't you just flash the previous working recovery via fastboot again?
-------------------------------------
Sent via the XDA Tapatalk App

You should be able to put the recovery image on your sd card and use the flash_image command from the terminal right? thats what i did

Mod. edit: not dev related, moved to general

twigster said:
If your phone is rooted, can't you just flash the previous working recovery via fastboot again?
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Just to let you know, it is possible to root a mytouch without ever having installed an SPL that allows flashing though fastboot. I know from personal experience that the one-click flashrec method does this

adavis159 said:
Just to let you know, it is possible to root a mytouch without ever having installed an SPL that allows flashing though fastboot. I know from personal experience that the one-click flashrec method does this
Click to expand...
Click to collapse
I know, thats what I did as well.
But since then, till the date I changed to an engineering SPL, im pretty sure I have always done the subsequent changes to my recovery and spl using fastboot, even after starting with the 0010 SPL (which was at the time a problem SPL) and using flashrec to change the recovery before installing my first non stock rom, being cyanogen 4.x.x, still with the 0010 SPL.
I do know that it only became necessary for me to change my SPL when I wanted to try new radio ROMs (subsequently moved back, and took the chance to move to the 2010 engineering SPL) Before that I was actually too scared to change the SPL because of the brick threats.
I used the cursorsense rom thread instructions on how to change the radio and spl, and it worked great.
Maybe, so far, I have been lucky not to brick my phone. But I have always followed well documented threads on the dev section and so far so good, not excluding one or two times when I thought I had made a nice brick, but just persevered.
Fastboot is your friend, and so is XDA if you are nice to it and the good people who frequent it.
If you look through the threads, and in the development section, there are alot of areas where they give the commands necessary for a variety of actions, and peoples responses on whether it works.
I don't yet believe in the programs created to do everything for you, nothing against the devs, who are all great, just not quite happy enough with comments posted to try them out yet.
(I think my response was little longer than needed) ;-)

Thanks for the info guys...
Problem was I could not boot into fast boot - the recovery was not there.
What I ended up doing was unrooting then rerooting my phone, reloaded my ROM and went on from there...
That might have been the long way of doing things but it all worked out well.

[Q] MT3G 1.2 Stuck @ Splash Screen

Hi all, thanks in advance for any help and my apologies if this exact problem has already been resolved. I searched through this forum and found issues *similar* to my problem but nothing exact enough for me to find a solution.
My experience with Android is limited but have quite a bit of terminal UNIX experience...so I'm not a total noob and I can follow directions pretty well.
I purchased a MT3G from someone and everything seemed to be in order when I checked it out (and the price was good, so I figured I didn't have much to lose). He was running Cyanogen Mod on there but of course I wanted to restore to factory settings and build it up from scratch on my own. Thinking that I knew what I was doing, I booted into Recovery (Home/End key simultaneously) with no issues and ran the factory reset utility, thinking that this would just drop the phone back to factory settings and I could re-root it from there. When I turn the phone back on, it just hangs at the "splash" screen and runs the animation over and over again.
I can still boot into Recovery and I can get into Fast Boot so I hope I am not bricked.
Here is the output I get from Fast Boot (attached file).
I tried to restore with a SAPPIMG.zip that I found but it said wrong device...
Any help would be GREATLY appreciated. Thanks!

http://theunlockr.com/2009/08/22/how-to-unroot-your-mytouch-3g/
If you get an error, you need to download an engineering spl, and then try. (Engineering 2010 SPL)
The link and instructions are around somewhere on XDA.

Thanks for the help!
Unfortunately I already tried that and it didn't work, so I guess I'll install the Engineering SPL when I get home.
Shouldn't I in theory just be able to flash another ROM over this one and have everything be back to normal?

Vontropnats said:
Thanks for the help!
Unfortunately I already tried that and it didn't work, so I guess I'll install the Engineering SPL when I get home.
Shouldn't I in theory just be able to flash another ROM over this one and have everything be back to normal?
Click to expand...
Click to collapse
Yes sir, that is the easy way!
there are plenty of 1.6, and 2.2 roms out there.
Just download to sdcard, boot into recovery, wipe and flash

Don't flash any SPLs. Your fine as long as you've got a custom recovery. Just flash another ROM from there and make sure you wipe data, dalvik-cache, and cache before flashing. I've been running CyanogenMod 5.0.8 since the summer (CM6 ran like crap) and I've been happy with it so far.
Sent from my HTC Magic using Tapatalk

Thanks for the advice guys.
Unfortunately I already flashed a different SPL and then un-rooted my device!
It works great, but now in order to get 2.2, I have to root it again which is a royal pain because I don't have a microSD reader and based on my research, the only way to root it it to make a goldcard!
Doh well! Learn something new everyday!

Vontropnats said:
Thanks for the advice guys.
Unfortunately I already flashed a different SPL and then un-rooted my device!
It works great, but now in order to get 2.2, I have to root it again which is a royal pain because I don't have a microSD reader and based on my research, the only way to root it it to make a goldcard!
Doh well! Learn something new everyday!
Click to expand...
Click to collapse
Not true you can root using the this app then use rom manager to install clockwork mod recovery. This is how I helped my friend root his device.
attached is the app