New PRL 60659 on Fresh 1.1 - Hero CDMA General

I was wondering if any Fresh 1.1 users have been having problems updating to the new PRL. I've tried several times throughout the day but it fails with a message to try again and to contact Sprint CS if it doesn't get resolved.

running Fresh 1.1 and just finished updating the PRL without any problems

+1. Just updated it with no problems.

bud1i9ht said:
running Fresh 1.1 and just finished updating the PRL without any problems
Click to expand...
Click to collapse
Thanks for the response. I guess the problem is specific to my phone - don't think I've made any modifications outside out rooting, istalling amonra and fresh 1.0>1.1 though.

My prl update went without a hitch, fresh 1.1

Updated 4 hero np here.

Worked for me.

On AOSP 1.6, so not an option to update. Used my Fresh 1.1 Nandroid and updated from that, then reloaded my AOSP 1.6 backup and viola! 60659 on AOSP 1.6

I'm on fresh 1.1 getting an error 1062.

what is a PRL and how do you update it on Fresh 1.1?

Just updated mine no problem on Fresh 1.1
@durhamite: PRL stands for Preferred Roaming List (http://en.wikipedia.org/wiki/Preferred_Roaming_List)
You update it by going to Settings > About Phone > System Updates > Update PRL
Basically it's a list of towers and how to connect to them when not on a Sprint tower. (Basically.)

I had to call sprint and have them refresh my PRL and profile from thier side to get it to work. Might want to give them a call.

I just got an error running Fresh 1.1. "PRL could not be updated. Please try again later. If the problem persists, you may need to contact Customer SErvice. Error code:1012."

Just got off chat with C.S. at Sprint and this update is only to correct Manual Roaming Issues. Apparently they do not like forced roaming LOLOL.

Interesting... I wonder if there is a correlation between the PRL update failing for me, and my phone force roaming once. Do you think there is anything possible with that? Oh, and I do want this update... so how can I update it? I saw that I should call Sprint... but what should I say/ask them?

Mine updated without a problem. If it is not working for you just tell them that you know of the update and need to know how to perform it since your phone wont do it.

updated with no probems here

Quick question, what number should I call to get the update from Sprint?

mrinehart93 said:
Quick question, what number should I call to get the update from Sprint?
Click to expand...
Click to collapse
Speed dial 2

i tried to update PRL and it said said "PRL was updated but will not install??" wtf is that?? lol..
UPDATE.. after 4 times trying it, updated and was applied.

Related

Radio Fail

I just recently went back to 2.2; using Mammon's build.
As I was laying next to my phone I heard the phone making the radio reset noise.. so I checked it turns I lost connection to the sprint towers, had no data or anything but.. Roaming worked just fine..just couldn't pull any data from sprint.
I updated PRL and Profile with no success in fixing it; and reflashed the dk17 modem to fix the issue.
Was just posting this to see if anyone has had this issue; and the reason it's not in Mammon's ROM post is because I believe this to be the Modem issue Firon ran into previously before the leak's 'lauch'
I have had this issue with ALL froyo roms, even the stock one. I cannot run froyo for this reason. Im not sure what the problem is.

Froyo Troubleshooting

Just upgraded to OTA leaked froyo, and now it won't let me select ringtones for text messages, calls, ect. The whole phone freezes up and shows a blank screen. What do I do? Is there any way to downgrade back to 2.1?
b3nny said:
Just upgraded to OTA leaked froyo, and now it won't let me select ringtones for text messages, calls, ect. The whole phone freezes up and shows a blank screen. What do I do? Is there any way to downgrade back to 2.1?
Click to expand...
Click to collapse
I would try to either
1) ODIN back to DI18 and reapply the 2.2 update ROM
2) ODIN directly to DK28
your call
Do you have a link on how to Odin DK28?
EDIT: Nevermind, I think I want to go back to DI18 and just wait for the official OTA, I'm having too many problems
b3nny said:
Do you have a link on how to Odin DK28?
EDIT: Nevermind, I think I want to go back to DI18 and just wait for the official OTA, I'm having too many problems
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=861253
Thats the DK28 ODIN file
Give it a shot man, I'm running it with NO issues to speak of
I did it, but my gps doesn't seem to work anymore.
Has anyone used 4g after the update. Is the connection more stable?
Is it me or does it seem that the linpack scores should have gone up a bit more..
I was getting around 8.3xx in 2.1, and now I'm getting 13.7xx in 2.2.
(I used the 1506bdf2e04b.update-SPH-D700_DI18ToDK28.zip renamed to update.zip method.)
Saw a video the other day showing a nexus 1 scoring 20+ on 1st run and 40+ on 2nd.. My friends Evo (with 2.2) scored @ 38 or so..
Quadrant still shows me well under all of the 2.2+ phones listed.
(1st post, great forums BTW!)
=]
I ended up flashing my phone back to the DI18 version because of the plethora of problems I was encountering. Hopefully the official release of froyo will be flawless, because the parts of my phone that were working were absolutely fantastic!
I updated and everything is working fine except I can't download apps. It just sits there in "starting download." I can access the internet fine. I tried it over wi-fi, 3g, 4g. Any ideas?
tyklip said:
I updated and everything is working fine except I can't download apps. It just sits there in "starting download." I can access the internet fine. I tried it over wi-fi, 3g, 4g. Any ideas?
Click to expand...
Click to collapse
Fixed it by logging in to google talk. just like android troubleshooting told me to do. Duh.
Anyone having problems with the email app? Im trying to setup my gmail through the email app as an exchange account and ots not working anymore
Sent from my SPH-D700 using XDA App
I was having alot of the same issues as you b3nny. A factory reset got my sounds, camera, and memory card reader back. Haven't tried gps though
I used the rename zip on memory card to update method

[Q] Evo Will not sign onto 3g need assistance

Hardware Version 0003
Im having a issue with my Evo a few days ago I switched from mikfroyo to mikginger and since then i have only been able to get onto a CDMA-1xrtt network or 4G. could this just be a build issue on mikginger or is it possible that it is a issue with my actual hardware? I checked my gf's evo which is still on mikfroyo and shes able to get 3G and is never on 1x.
After searching I havent found anything to support the idea that its mikginger but has anyone else had this issue before I do a complete wipe and take the phone back to the new OTA
(Nandroid first) Flash a rooted 2.2 ROM, whether it be stock, Azrael, or such.
Go into EPST (Dial ##3282#, Choose edit mode), enter your MSL code, Data Profile, hit the menu button and choose restore. Just sit there, your phone will reboot and everything will go back to default. This should fix your 3G issue.
Have you updated your radios or something recently? I have, and seem to be staying on 3G more often.
I don't know about restoring from your nandroid, you can try it, but I always start fresh.
Download MSL reader from the market and write down your MSL code
Dial ##3282#
Choose edit mode
type in your MSL
Select Data Profile
Hit Menu on your phone
Hit restore
hit okay.
It will reboot phone and reactivate. You should have 3G after that. I had to do that as well recently. the stock EVO only shows 3G even when I am in 1X so I was always in 1X just didn't realize it.
What these guys said It doesn't need to be a stock rom, just a sense rom.
As you've found out, the notification icon is more of a guideline and spoof by HTC/Sprint to show 3G most of the time within the script. The aforementioned tips could very well do the trick for you or it could be hardware related. I've done those steps and countless hours of doing everything under the sun to going as far as unrooting to see if it would come back..no dice. I was traveling and had the issue in several states, so it wasn't a local network issue as well.
One thing you can do is go into a rom with 2.0 or later sense. Go to Settings:>About phone:>Network...look under Mobile network type. If it says CDMA - EvDo rev. A, you can stop worrying about your 3G being borked. Going to an area that you KNOW has 3G may help with being comfortable. If it says 1Xrxx then you might have a hardware issue as I did, and had to get mine swapped out. Hopefully it's within the first year or you have the insurance if that is the case.
Hopefully the tips given before fix the issue, which it should aside from hardware issues.
Good Luck
thanks, it did the trick I am using MikGinger and ended up doing a full wipe for the update, did the trick and im back to my normal speeds
Thanks Everyone
I have the same issue after flashing a MikG rom. However, entering ##3282# in my dialer doesn't do anything. It doesn't launch EPST as its supposed to. How do I fix that?
what mik rom are you using, I have no problem with 2.0 and my issue was on 1.4
Sent from my PC36100 using XDA App
Halient said:
what mik rom are you using, I have no problem with 2.0 and my issue was on 1.4
Click to expand...
Click to collapse
I'm using the latest, 2.15. I wiped everything before flashing. I tried updating the profile and even called Sprint to have an updated data profile pushed to my phone, but it still only shows 1x and the speeds are terrible.
slick69 said:
I'm using the latest, 2.15. I wiped everything before flashing. I tried updating the profile and even called Sprint to have an updated data profile pushed to my phone, but it still only shows 1x and the speeds are terrible.
Click to expand...
Click to collapse
did you backup on your old 2.1 or 2.0? if you did id go back and do it on one of them, I just flashed 2.15 and i am able to get into it like i was on the 1.xx
Halient said:
did you backup on your old 2.1 or 2.0? if you did id go back and do it on one of them, I just flashed 2.15 and i am able to get into it like i was on the 1.xx
Click to expand...
Click to collapse
The strange thing is that I wasn't able to use ##DATA# on my phone before I flashed to MikG either. I got 3G Rev A, but I couldn't get into EPST.
I flashed another ROM today (deck gingerbread 1.2) and I still don't have 3G. Any help?
OK, so I flashed to an AOSP Gingerbread ROM where I was still having the issue with only seeing 1x.
Then I flashed the latest radio, NV and PRI. Still no 3G.
Then I flashed to the latest stock rooted ROM. There I was finally able to get into EPST and change the setting to Automatic. It was on CDMA Only.
I now see State 3 = Connected in the EVDO Engineering menu from the Field Test Menu (##33284#). Hope this helps someone else. No wonder I had been getting ****ty "3G" speeds ever since I got my EVO. I wish the stock ROM would tell you that you're on 1x, not EV-DO, like every other phone does.
Now as my final step, I'm about to restore the backup of the Sense 2.1 ROM I flashed yesterday.
Restoring back to MikG 2.15 was a success, I have actual 3G now.
My apps are all there, but user data is gone and the apps that I downloaded from the Android Market don't show in the My Apps section. I might hard reset and install everything from scratch because I don't know if its as smooth as it could be either.
No 3G
I'm having the same issue on my girl friends phone. When I flash mikg rom on it no 3G, only 1x. When I flash fresh evo, it works just fine. I wonder why this is? My phone has no problems what so ever. I flashed the same roms she did.
qbanways said:
I'm having the same issue on my girl friends phone. When I flash mikg rom on it no 3G, only 1x. When I flash fresh evo, it works just fine. I wonder why this is? My phone has no problems what so ever. I flashed the same roms she did.
Click to expand...
Click to collapse
How are you flashing? What recovery? Are you wiping everything? Are your radios up to date? Did you update prl and profile after flashing?
sitlet said:
How are you flashing? What recovery? Are you wiping everything? Are your radios up to date? Did you update prl and profile after flashing?
Click to expand...
Click to collapse
Im using AM 2.3 recovery. I did all that. I wiped everything. The funny thing is that I did the same thing on my phone that I did on hers and mines works perfect. We went from Fresh EVO to MikG. I put her back on Fresh evo (flashed the new version) to fix the issue. But she is being a pain in the butt and wants the same ROM cuz she wants to use some of the themes for MikG and what not. Anyways, I'm going home and going to try the fix using ##DATA# and see if it works. I'm just more curious to know why this happens to some phones and not others.
it worked
Well going to fresh evo then restoring my networking using ##DATA# worked. I flashed MikG and she has 3G now. Thanks guys.

Verizon XPlay won't update?

Hey guys, quick question here.
Anyone know why my phone won't do the OTA update?
It's not rooted, unlocked, or anything - just a stock R800x. I flip my 3G on, head to settings -> about phone -> software update -> update now-> check for updates. Then my phone "thinks" (the little revolving cirlce) for about 10 seconds, and I get this message:
Error
A download error has occured for your software update. Please wait a while and go to Settings, Software Update to try again later.
It's been saying this for about an hour now. WTF?
Update - still can't update.
Is there a website to download the 2.3.3 update so I can do this thing manually?
Anyone have any idea what could be going on?
Its the MobileCare update program that Verizon puts on, its a POS.
Go to your applications, find MobileCare and click "Clear Data", then go back and try again, that should do the trick for you.
Unfortunately this did not work. Thanks for trying, though. Any other ideas?
kershner25 said:
Unfortunately this did not work. Thanks for trying, though. Any other ideas?
Click to expand...
Click to collapse
Thats strange... Sorry not sure what else you can do... Maybe its just down today and it will work tomorrow?
When did this update come out? Shouldn't I have gotten some kind of a push notification by now?
8 hours later, still can't update. Get that same error message every time.
Can I call Verizon and have them do some kind of override or something?
kershner25 said:
8 hours later, still can't update. Get that same error message every time.
Can I call Verizon and have them do some kind of override or something?
Click to expand...
Click to collapse
They might have you reset your phone and start over, which is not such a big deal as google will just redownload everything you had. And if you have any gameloft games you can redownload them from there.
I had a similar issue except that mobile care was crashing for me
as in I'll open it hit update now
then I'm back at about phone after a half second of the please wait loading window thing
clearing the data worked
---------- Post added at 01:02 PM ---------- Previous post was at 12:46 PM ----------
nope apparently I'm getting user rejected 401
after just a little bit
If anybody here has issues updating, please go to a VZW retail location and the technician can manually reflash the device to the latest release.
You might also try using Flashtool 0.2.9.1 and flashing the ftf file available here: http://forum.xda-developers.com/showthread.php?t=1201725 "Full System FTF"
This will return you to complete stock out-of-the-box. Then try the update again.
sometimes weak signal can also cause it to time out
that's what happened with mine
verizon sucks at updating 2.3.4 has be out for awhile and i still havent got it.... fail

Session in progress. Please try again later problem when trying to updae PRL or Prfle

[Q]
Every time I try to update PRL or Profile, I get the message 'Session in progress, Please try again later". I tried with different locations, (towers), waited a day etc. Any way to get this to update? Only seemed to happen since rooting. Everything else seems to be working fine.
Rooted with shabby kernel otherwise stock
MDL with shabby kernel Minty-Fresh-14 #1
build JDQ39,L720VPUAMDL
weightlifter63 said:
[Q]
Every time I try to update PRL or Profile, I get the message 'Session in progress, Please try again later". I tried with different locations, (towers), waited a day etc. Any way to get this to update? Only seemed to happen since rooting. Everything else seems to be working fine.
Rooted with shabby kernel otherwise stock
MDL with shabby kernel Minty-Fresh-14 #1
build JDQ39,L720VPUAMDL
Click to expand...
Click to collapse
I know I am bumping an old thread, but I am experiencing this issue as well. Did you ever get this fixed? What as the resolution?
Again, I know I am bumping and old thread like slixzen, but I too, am having this same problem. Stock rooted NAE with some Xposed tweaks.
Another thread mentioned unfreezing Samsung DM (whatever that is) with TB. Didn't help. Another thread mentioned defrosting/unfreezing Sprint ID and Sprint Zone. Didn't help either.
Ideas?

Categories

Resources