Internet on phone via active sync connection - Networking

Hi guys!
with windows and active sync usb connection i can use the internet on my phone via this connection.
i want the same without active sync and windows. i mean i want the same scenario with ubuntu and the synce connector.
if i plug my phone on the usb port under ubuntu und choose active sync connection on my phone i got a new iface in my ubuntu (eth2 169.254.2.2)
looks like a normal active sync connection.
but how can i use the ubuntu pc as a gateway for my phone?

Internet sharing
Go to start Internet Sharing Pc connection as USB, select network conection at the bottoum left connect .. thats all just open IE browse the sites

Hi,tnx 4 reply.
but i think this is the completely wrong way.
if i use your description my mobile is the gateway and i can surf the internet with the pc that is connected via usb.
i need the other way.
if i go to inet conn. sharing as you describe. i can select usb and below my provider (in my case E-Plus Internet).
if i click connect, the phone is bringing up 3G internet. that is not what i want.
i want to use the network connection on my pc to use with my phone.

when phone is connected to activesync click start don't click X on activesync as you want to keep that running
choose
settings->connections->connections->advanced->select network
choose my network or what ever it's called on your device
rather then my isp or what ever it's called on your device
then now your phone will use the same network connection the pc use
unless you block it by firewall or otherwise block it on the pc side

[solved] Internet on phone via active sync connection
Hi guys i thougt i had remarked that i want to use it with linux.
the trick is....
you have to install a part of the synce tools.
u need synce-sync-engine
and synce-tray-icon to make a partnership between the pc and the phone.
thats all

Little more details, please:

instinctless said:
Hi guys i thougt i had remarked that i want to use it with linux.
the trick is....
you have to install a part of the synce tools.
u need synce-sync-engine
and synce-tray-icon to make a partnership between the pc and the phone.
thats all
Click to expand...
Click to collapse
More details dude please....

Related

how to connect to internet(on windows xp pc) using gprs(from prophet) via bluetooth

hey all.
thx 4 all the help,advice n guides here.
i have a htc prophet n a windows xp laptop. heard that u can use gprs via bluetooth to connect to internet on pc.howd u do that.plz outline.
You're probably confused... You have to establish an activesync connection by bluetooth and then you'll have access to the web... Just like using the cable but slower...
and how do u setup the active bluetooth connection?
You just have to activate the 'modem link' on the PPC. In Vista at least, all I do is create a new modem connection using the bluetooth modem on the PPC and dial *99#. Pretty simple....
In some ROMs there is an Internet Sharing Option....just activate it, select Bluetooth PAN & connect to the device from PC
could some1 plz outline the steps for setting up the connection, coz all i hear is 'murmuring' ..plz,am still new to all this ppc stuff
Look at the Wiki - start at here's a hint: http://wiki.xda-developers.com/index.php?pagename=Prophet_USBModem
Hello friends!
I spent about 2 days on my phone wondering and trying to get internet connection on my Prophet...So I did it!It's like this:
When you connect your Prophet via USB it will show you new connection....
Go to Start/Control Panel/Network Connections and than click on left side "Set up a home or a small office Network"...So when you finish the wizard,restart your computer (do not disconnect Prophet) and it will work...It was the only way for me to get Internet Connection...I hope I helped someone just like others helped me...Greetings!
can i use GPRS surf the internet with laptop(not with the phone), is there any setting in order to surf the web? thanks!
I think It's not worth it...In Slovenia,where I live,GPRS is at least 10times more expencive than tipycal cable NET...Some of my friends tryed to connect laptop to NET by smartphone,but the speed in really low and also phone bill was shocking...So get standard internet...Greetings!

Question in internet connection

Hi,
This might be a silly question, but I was just wondering if it is possible to use the internet connection on a PC if the hermes was connected to it via USB?
I dont have wifi and my PC connects directly to the internet, is there anyway the Hermes can access this connection?
J'
Right now I am using my ATT8525 as my modem.
It took me a long time to get it but I'm still not sure how I excatly what settings I did.
One thing is ""Internet Sharing"
Find that and setup for USB and then connect. Your computer might see the connection and go from there.
Wish I could help more...
It should work automatically when your Tytn is connected via ActiveSync and your desktop computer has internet. No further configuration should be necessary on default. Just open the Tytn's IE and try it out ...
Oh my bad... I got the question backwards

Connect PPC to internet using PC

HEY everyone....
i am TIERED of trying and searching can anyone tell me how to Connect my PPC to internet using PC...why...complicated....
but i need your help in case anybody knows....
i need steps to do so...(i was told i have to create a new workgroup onto my PC and BLA BLA BLA but i didnt know how to figure it out)
PLEAAAAAAAAAAAAAAAAAAASE i need your help
if you mean using bluetooth or usb then when you are connected to activesync the pda use the network of the pc
well thank you "Rudegar"...
i am connected using USB to active sync...but it doesnt use the network of the PC...i have tried too many ways but i cant figure out what to do...
and i have choosen the option (connects to internet) from active sync and still i have a problem...
can you please help me out...
settings->connections->connections->advanced->select networks
there are some texts showing "programs that automatically connect to the internet should connect using"
and a dropdownbox
select the dropdownbox item which is not called something like "my isp"
but pick the one thats called something like "my network"
then all programs trying to access the internet will be forced to use activesync as internet connection and if activesync is not connected they will fail!
if i am reading your post right you are trying to use ur ppc as a modem to connect to the internet?
If so, use these steps:
connect ppc to PC thru usb, let activesync do it's work
on PPC go to Start>Programs>Accessories and open the Internet Sharing program
After this is done, it should allow you top connect to the internet by using the PPC as a modem. It's a slow connection, but it works
Soniku007 said:
if i am reading your post right you are trying to use ur ppc as a modem to connect to the internet?
If so, use these steps:
connect ppc to PC thru usb, let activesync do it's work
on PPC go to Start>Programs>Accessories and open the Internet Sharing program
After this is done, it should allow you top connect to the internet by using the PPC as a modem. It's a slow connection, but it works
Click to expand...
Click to collapse
Well thanx for your reply, but actually i want my PPC to connect to the internet through my PC!!! anyway thanx for the reply
Rudegar said:
settings->connections->connections->advanced->select networks
there are some texts showing "programs that automatically connect to the internet should connect using"
and a dropdownbox
select the dropdownbox item which is not called something like "my isp"
but pick the one thats called something like "my network"
then all programs trying to access the internet will be forced to use activesync as internet connection and if activesync is not connected they will fail!
Click to expand...
Click to collapse
ok....i did what you have asked me to do..but...when i try to open a web page a balloon shows up saying cannot connect so i click (setting) it shows me My ISP settings ...where i have to specify a new modem conection ...when i opened a list called (select a modem) it has these choices (bluetooth,cellular line, cellular line GPRS 3G, Generic IrDA, and Hayes COmaptible on COM1...
which to choose....!!! also what to fill in its details,,,,
i know i made a mess and i totally made you angry and mad sorry for inconviniet but i need your help
thanx in advance
i dont change any of those settings
when it's connected to activesync it got network
connection
be sure not to close activesync but to minimize it
Rudegar said:
i dont change any of those settings
when it's connected to activesync it got network
connection
be sure not to close activesync but to minimize it
Click to expand...
Click to collapse
ok...will you please open the connection settings and tell me whats in it....because im sure that my activesyn is on and working perfectly...but i reaaaaaaaaaaally need those settings....
Thank you so much i know im like a pain in the (you know ) but really really i appreciate your help
it's empty it just show
add network connection
add vpn connection
setup my proxy
i use bluetooth mind you if you use usb you have to
check Enable advanced network functionality
in usb to pc though
and your pc activesync should be set to not block it
and your firewall should alow it
usually you don't need to change anything in settings to get internet with usb, try hard reset your ppc and reconnect. Also, IP in your pc shouldn't be specified (keep it automatic)
finally i found the answer to my thread; http://forum.xda-developers.com/showthread.php?t=374172

using gprs/umts while USB connected

Hi,
Is there a way, to only use GPRS/UMTS connection while the device is connected via USB? When I'm connected via USB, my Hermes tries to use the ActiveSync connection for Internet, which won't work (company proxy), so I want to have UMTS connection, but still be able to remote-control via USB...
mine use gprs when i choose my isp in settings->connections->connections-Advanced-select network
even when connected to activesync
hm, I have for both settings there "E-Plus Internet", i.e. my provider... still it doesn't connect. As soon as I disconnect USB, it works.
then i would try unchecking enable advanced network functionality
in usb to pc in connections
still the same... doesn't connect
TauTau said:
Hi,
Is there a way, to only use GPRS/UMTS connection while the device is connected via USB? When I'm connected via USB, my Hermes tries to use the ActiveSync connection for Internet, which won't work (company proxy), so I want to have UMTS connection, but still be able to remote-control via USB...
Click to expand...
Click to collapse
On the PC head into ActiveSync, open up the Connection Settings for the device in question, try unchecking "Allow data connections on device when connected to PC".
Disconnect the device from USB, then reconnect and sync, then try to access the internet on the device.
hm, I thought exactly that option should be checked, because it says "allow wireless connections while connected to the PC". Nonetheless, I unchecked it, dis-/reconnected it, still no go.
Is this because you dont have the net on your PC?
Maybe your provider doesn't allow tethering. I.e. using the phones internet connection whilst connected to the pc.
You can use PDAnet ,download trial from here
http://software.palminfocenter.com/product.asp?id=4237
this will allow you to use the internet whilst connected to the pc, but this will also mean the pc can also use the internet of the phone, i am not sure if this is exactly what you want, as you dont indicate the reason why you want to be able to connect to the net on the device. Anyway using PDAnet, you will still be able to sync,browse and use the device as you normally would, as well as access the internet on the PPC and PC.
scousemartin said:
Is this because you dont have the net on your PC?
Maybe your provider doesn't allow tethering. I.e. using the phones internet connection whilst connected to the pc.
Click to expand...
Click to collapse
There is internet on the PC, though behind a proxy with auth (and some blocked stuff). Since the proxy auth isn't RFC conform it seems, using the internet connection on the phone doesn't work with most programs (i.e. weather updates), some programs even don't have a proxy option (and the one from "connections" doesn't work either). That's why I want the phone to connect itself by UMTS, while I still can remotecontrol it with PocketController. As everybody already said, it should be possible.
You can use PDAnet ,download trial from here
http://software.palminfocenter.com/product.asp?id=4237
this will allow you to use the internet whilst connected to the pc, but this will also mean the pc can also use the internet of the phone, i am not sure if this is exactly what you want, as you dont indicate the reason why you want to be able to connect to the net on the device. Anyway using PDAnet, you will still be able to sync,browse and use the device as you normally would, as well as access the internet on the PPC and PC.
Click to expand...
Click to collapse
mh, the PC shouldn't use the phone as modem, that would violate the security restrictions here badly. I'll try PDAnet and see if I can restrict that.
Edit: PDANet also can't connect. could it be possible, that it is some Windows policy on the Desktop preventing that?
Can you turn Data Connection off in CommManager on the PDA?
desolateone said:
Can you turn Data Connection off in CommManager on the PDA?
Click to expand...
Click to collapse
hm, not really....
I am interested in this as well.
I have the Titan (Sprint Mogul) and would like to be able to connect it to my work computer VIA USB and be able to charge the phone and control it via MyMobiler but the phone should use its EVDO cellular connection for the internet. Instead it appears to use the internet that my work computer has which blocks certain sites and ports for IMAP and POP.
I would like the phone to be able to check gmail (via IMAP) as well as go to any website I would like.

Wmwifirouter USB to Wifi

Hi i have an HD2 and i want to use my internet connection from my pc with USB on the HD2 and this to Wifi...
So i put the usb cable on the hd2...set Active sync... now is can use the internet over my pc....
now i start wmwifirouter... click on usb to wifi
he is connected...but i cant get an internet acces over another device ill used over wifi....plz help... what i must set?
USB Mode Rndis and Active sync oder Rndis and Internet sharing?
On the PC what i must setting??? I have windows 7...
plz help!!
wmwifirouter is made for doing the other way around
unless your setting block this your phone will have the network connection of your pc when ever your phone is connected to activesync
if it don't then you need to make sure that your pc firewall or activesync don't block it
and that your phone is set to use my network connection rather then my isp
th problem is...if i set rndis my pc dont find the device via active sync...
i have the same problem.
Run wmwifirouter on your device and then connect it to your pc. you shouldn't need to run anything else.
hth
dave
Not working.i select rndis and first internet sharing...not working..second rndis active sync not working.
I have made a blog post about this issue and how to configure this mode properly. It is tricky when you don't have a guide. It works seamlessly and I have purchased wmwifirouter just to use this mode
Check out : http://adityasanghvi.com/windows-mobile-usb-to-wifi-wmwifirouter/

Categories

Resources