My auto lock screen does not seem to work.
I have dim backlight set for 10 secs and turn off device set for 1 min.
If I just leave the HD2 its dims the backlight and turns itself off after 1 min but when I wake it up there is no lockscreen.
At the moment I have to manually lock it by using start - lock, or using the end call key, but I thought it should lock itself?
Does anyone know how I can get the auto lock to work?
Thanks.
Found the answer, for some reason the default setting of HKCU\ControlPanel\Keybd DeviceLockWhenSuspend is 0, I changed it to 1 and it is now working properly.
Jackdow - thanks a lot for the answer, my HD2 was doing the same after a crash when using the Opera browser. I followed your instructions & hey presto, now I have the Lock screen back when wakes from shutdown . Quite why the cash corrupted the registry is a mystery.
I think it's pretty bad that I have to hack the registry to get my phone working again. I had a nokia s60 phone for years & never had to hack the thing. My so far brief encounter with Microsoft's O/S leaves me very unimpressed.
Brilliant
jackdow said:
Found the answer, for some reason the default setting of HKCU\ControlPanel\Keybd DeviceLockWhenSuspend is 0, I changed it to 1 and it is now working properly.
Click to expand...
Click to collapse
thank you very. I've this problem too.
hii..., i have the same problem with my touch pro2(rhodium) and when i check my regitry i can't found HKCU\ControlPanel\Keybd DeviceLockWhenSuspend.
so i add it on my registry, but nothing happen. plz help mee....
Related
what about automatic keylocking after established time ?
Easy enough to do - there's an idle event in the registry. Get it to launch VJDeviceLock or any of the other locking tools after system is idle for say 30 seconds.
http://forum.xda-developers.com/vie...postdays=0&postorder=asc&highlight=idle+event
Good idea though...
V
my english is to pur I have installed deltalick what should I add to my reggistry to automatic activate deltalock after 30 seconds
THANX
look at
http://forum.xda-developers.com/viewtopic.php?t=45953&highlight=devicelock
Set your phone to switch off after 30sec, then when you wake up it, it will be locked.
changing the subject a little: is it possible to use the key for other programs (I think at speeding up the device at day and slow down at night (batteries)) ?
i tried this using ScreenLock.exe and works fine. the only problem is that if there is a new sms, the screen unlocks
Marx2 said:
look at
http://forum.xda-developers.com/viewtopic.php?t=45953&highlight=devicelock
Set your phone to switch off after 30sec, then when you wake up it, it will be locked.
Click to expand...
Click to collapse
can install in window moblie 2005?
Hello,
i have a problem with applications running on my topaz.
They all run fine on Windows Mobile 6.1 (Pro),
but if i press the On/Off button on the top of the device to switch off the display or if it automatically switches off
the running applications only run in background minimized when turning the display on again.
they all run in background and i see the TF3D Interface in front.
Is it possible to switch off this "bug" with a registry key or do you know any solution for this problem..
Would be very nice if you help me with this problem.. wondering that appearantly nobody else had this problem before..
i used the search function of this forum .. and google.. cant find anything.. maybe searched the wrong keywords..
PS.: Sorry for my bad English.. Hope you could understand me xD
please help.. its a hard problem ..
?
so ... basically ... you want to automatically close all apps from background when the phone goes in stand-by mode?
As I understand it he's saying that when he presses the power button to go into standby, and then presses it again to put the screen back on, the unit is always back at the TF3D main screen, rather than on the app he was previously using. Mine certainly stays on the same app. I suspect it's something to do with the auto lock settings.
thank you for your answers
@ georgeono:
no i want to prevent them being minimized.. after the standby mode..
at first they all run in front of tf3d..
then.. -standby mode- is activated
[the screen is black]
i reactivate the phone..
-> all running applications run minimized (in background) behind TF3d and i have to choose them at first in the task manager to get them to front again..
but i want that they arent minimized when i reactivate the phone..
nobody has this problem too ?
please post a solution
Did you apply any tweaks? registry changes? or is this happening on a cooked rom? which applications did you install before this happend? I doubt this happened "on it's own"
no i dont use any tweaks ..
just the blank device with vodafone branding ..
i think its a windows mobile behaviour.. because i have the good old htc artemis with windows mobile 6 and it has the same problem too..
..
thanks for your answer
The same happens with 6.1 & 6.5 ROM's. It is normal behavior...
I hate it because it continues to use RAM, but it's "normal" WM behavior.
There is likely a registry edit to auto close programs, but that wouldn't help you.
tomtommy306 said:
The same happens with 6.1 & 6.5 ROM's. It is normal behavior...
I hate it because it continues to use RAM, but it's "normal" WM behavior.
There is likely a registry edit to auto close programs, but that wouldn't help you.
Click to expand...
Click to collapse
normal behaviour? I don't get that on my Topaz (stock ROM 6.1 unbranded) - Returning from suspend the program I ran last is still in the foreground...
Ok, here's what I would check:
Download FDCSofts Taskmanager http://www.dotfred.net/TaskMgr.htm
Install and start, píck "notifications" from the drop down list on the upper right.
Check if one of the entries is a "CNT_EVENT" set to the event "The device woke up". If there is one try disabling it (don't delete yet!). Disable with the 6th button from the left on the lower bar of FDCSofts Taskmanager.
Do not mess around there! Disable at most, don't delete if you don't really know what you're doing.
.
TinTin said:
normal behaviour? I don't get that on my Topaz (stock ROM 6.1 unbranded) - Returning from suspend the program I ran last is still in the foreground...
Click to expand...
Click to collapse
I double checked again to make sure.... Still does it and always has.
I am using udK R6 now and it is the same.....
No biggie though. I always close everything down in task manager anyway.
Thank you for your answers .. its such a nice xda forum.. very good xD
To the problem.. :
i think its a windows mobile behaviour too.. but if so, it shouldn't be a problem ..
anybody knows the registry tweak to solve this problem ?
@andy_2307
I think i found the solution to the problem...
Just after i posted the same problem in another thread here on xda-developers, i got the idea to change on thing just for trying.
let me guess: you have a (numeric) device lock activated, so that you can lock your device with a "PIN" (separate from your SIM-card PIN)?
Even if you set the time to - let's say - 24 hours, so that the lock does not activate itself, but only when you lock your device manually by pressing the end-call-button for some seconds; this setting (having the numeric-lock activated) causes the issues.
I just deactivated the lock, so that long-pressing the end-call-button just locks the screen and does not force you to enter the device-PIN - and now the device won't go to the homescreen after waking up from standby.
This would explain why not everybody has experienced this - many people do not lock their devices with a separate PIN, and as such don't see this issue.
Only problem now is - for Security Reasons i want to have my device locked in a way, that someone else can not access it (even via activesync) if i lose my device or if it is stolen. without the default windows-mobile locking function, how is this achieveable?
annoyance A or annoyance B
htcd2fan said:
@andy_2307
how is this achieveable?
Click to expand...
Click to collapse
Just tried messing around with this on my touch pro 2. Hitting the suspend button manually and then reactivating returns to the home screen.
Just found that if I set the "Prompt if device unused for" value to "0 Minutes" it stops returning to the home screen, but now I have to type the security code every time it suspends. I guess it depends on what you find more annoying.
It looks like, for me at least, if I am presented with a security input panel, it doesn't return to the home screen on resume. Seems related to the security lock feature, but not necessarily a bug with the lock itself.
I'm using Miri WM 6.5 Manila 2.5 REV 6.
If I go to Start -> Lock, it works fine. But for Auto Lock (Settings -> Lock) it requires specifying PIN.
Is there a way to use Auto Lock in WM 6.5 without entering PIN/password to unlock?
kengkaj.s said:
I'm using Miri WM 6.5 Manila 2.5 REV 6.
If I go to Start -> Lock, it works fine. But for Auto Lock (Settings -> Lock) it requires specifying PIN.
Is there a way to use Auto Lock in WM 6.5 without entering PIN/password to unlock?
Click to expand...
Click to collapse
Did you try HDTweak yet? It has a setting for autolocking.
I have tested it and it works however, on mine there was a strange issue with the backlight where it wouldn't turn on after unlocking. I had to turn off the screen and then turn it on, then the backlight would come back. It's only a minor issue, but if you can live with it it'll be fine.
http://montecristoff.webs.com/hdtweak.htm
Many thanks. But I did not use HDTweak AutoLock option because of that very issue .
Don't understand why MS doesn't implement this simple functionality.
kengkaj.s said:
Many thanks. But I did not use HDTweak AutoLock option because of that very issue .
Don't understand why MS doesn't implement this simple functionality.
Click to expand...
Click to collapse
Hmm... give Slide2Unlock a try. It supports autolock, but it's also a separate app which means using it will cost you more memory than the built in lock. But if you are in desperate need for this functionality, give it a try and it might just work for you.
I believe the newest version is S2U2.
Hallo,
I use this. http://forum.xda-developers.com/showthread.php?t=542482
May be it works with WM 6.5 as well
Regards
kengkaj.s said:
Many thanks. But I did not use HDTweak AutoLock option because of that very issue .
Don't understand why MS doesn't implement this simple functionality.
Click to expand...
Click to collapse
Its not the best solution, but a way round this is to stop your phone light going to dim in the power settings. Just have the screen turn off after 2 mins or so instead. This way the screen never goes dim therfore never stays dim!
Use this app. It overcomes the dim light issue. First go back to HD Tweak and DISABLE the lock on screen dim.
Install the cab and then go to Settings\System\Smartlock and tick the Dim lock or Suspend lock options. The screen will then autolock on dim or on pressing power and there are no problems with the light on unlocking.
Thanks everybody. I'll try.
ClydeB1 said:
Use this app. It overcomes the dim light issue. First go back to HD Tweak and DISABLE the lock on screen dim.
Install the cab and then go to Settings\System\Smartlock and tick the Dim lock or Suspend lock options. The screen will then autolock on dim or on pressing power and there are no problems with the light on unlocking.
Click to expand...
Click to collapse
Unfortunately the Incall lock (presuming it is for incoming calls, because there is Outcall lock that should be for outgoing calls) does not work. The hardware buttons still answer/reject the calls which can be a problem while pulling the phone out of the pouch .
tkolev said:
Unfortunately the Incall lock (presuming it is for incoming calls, because there is Outcall lock that should be for outgoing calls) does not work. The hardware buttons still answer/reject the calls which can be a problem while pulling the phone out of the pouch .
Click to expand...
Click to collapse
Take a look here:
http://forum.xda-developers.com/showthread.php?t=556801
Have a look at phonealarm
http://www.pocketmax.net/phoneAlarm.html
For me, it handles locking and unlocking, supporting the stylus, profiles, location based functions and many more.
Another alternative is S2U2
http://www.ac-s2.com/
hello all...i had a quick question regarding throttle lock...the reason im using it is as an alternative to s2u2 bc that is a battery hog on my tp2...i was wondering if anyone knows through experience whether or not throttlelock will consume less battery power...also, is there a way to get it to lock whenever u put the phone into "sleep" mode (pressing the top power button to shut off the screen)...thats really the only thing i want to use it for...for example, when i press the top power button and the screen goes off, how do i get throttlelock to be whats on the screen when i "wake" the phone back up...it seems to me that the only options are to have it activate once u restart (power off and on) the phone or by pressing the throttle lock icon...i would find it very more useful if u could use it like s2u2 (turn screen off and tada!!! theres throttlelock)...can anyone help???
try smartlock. It works with the 6.5 lock and adds the functionality of locking when the phone is powered down. Search for the cab and there are instructions on what box to check to get that functionality.
will smartlock work with 6.1?
I tried s2u2 and also found that it seemed to use more power (based on readings from Homescreen++). Using throttlelock doesn't seem to have much noticable increase at all.
As for getting it to lock when you turn the screen off and wake try the following ...
Go into settings > Lock > Change 'idle time before lock' to '1' then click ok to save settings. Then exit the config go back in and change this back to '0' and 'ok'/save.
It works on my xperia as your wanting ... e.g, turn off screen using button on top, turn on and I need to enter the sequence to activate. I can't find the thread that I read the above solution on at the moment but if your struggling I will see if i can find it.
Throttlelock seems to be ok for me. It does not take much RAM, and does not consume that much power. I do have the lock thing to 0, and throttle lock comes up whenever i turn the phone on.
I used to use smartlock, but for some reason it doesnt work on the build i have!
sillysquid said:
I tried s2u2 and also found that it seemed to use more power (based on readings from Homescreen++). Using throttlelock doesn't seem to have much noticable increase at all.
As for getting it to lock when you turn the screen off and wake try the following ...
Go into settings > Lock > Change 'idle time before lock' to '1' then click ok to save settings. Then exit the config go back in and change this back to '0' and 'ok'/save.
It works on my xperia as your wanting ... e.g, turn off screen using button on top, turn on and I need to enter the sequence to activate. I can't find the thread that I read the above solution on at the moment but if your struggling I will see if i can find it.
Click to expand...
Click to collapse
well, i appreciate the help but unfortuantely that method, nor anything else i do makes it work like i want it to...any other options?
do you have to disable the pin lock before using throttlelock? i currently have to enter a pin and dont know how to disable it
mwrood said:
well, i appreciate the help but unfortuantely that method, nor anything else i do makes it work like i want it to...any other options?
Click to expand...
Click to collapse
I realise this is probably a daft suggestion but you do have autolock switch in the config?
Are you using 0.7?
Heres a link to the Throttlelock website wiki explaining the functions.
Might be of some help.
I'm having some trouble with the incoming call feature but apart from that it seems pretty stable.
I've tried the other options but the pattern unlock does it for me
judicious said:
do you have to disable the pin lock before using throttlelock? i currently have to enter a pin and dont know how to disable it
Click to expand...
Click to collapse
Do you mean the sim pinlock?
On mine the simlock asks for the password when i start up and i use throttlelock as a general screenlock.
sillysquid said:
Do you mean the sim pinlock?
On mine the simlock asks for the password when i start up and i use throttlelock as a general screenlock.
Click to expand...
Click to collapse
it's the pin lock for the whole because i use exchange mail, it's a security pin that everytime the phone goes to sleep, i have to enter it in. i did find a fix for this, it's in the reg file.
Hopefully this is my last question...
Somehow I've managed to disable the auto lock screen . So when I press the power button briefly to wake up the device, there is no lock screen.
I have searched high and low in the manual, on the phone and on the internet but no joy - can't find any hint as to turn this back on.
The only idea I have as to how I may have accidentally turned it off is by installing Profile Switch - but uninstalling and soft-reset has not made a difference.
I'm going to have to resort to a hard reset - anyone who can help me avoid this??
p.s. am a fairly novice user who has done nothing scary with this phone - only actions since purhcase have been to install e-wallet, GPS Sport Tracker (now uninstalled) and Profile Switch (also uninstalled) - no messing with Roms or any other software / registry customisation.
Eigertop said:
Hopefully this is my last question...
Somehow I've managed to disable the auto lock screen . So when I press the power button briefly to wake up the device, there is no lock screen.
I have searched high and low in the manual, on the phone and on the internet but no joy - can't find any hint as to turn this back on.
The only idea I have as to how I may have accidentally turned it off is by installing Profile Switch - but uninstalling and soft-reset has not made a difference.
I'm going to have to resort to a hard reset - anyone who can help me avoid this??
p.s. am a fairly novice user who has done nothing scary with this phone - only actions since purhcase have been to install e-wallet, GPS Sport Tracker (now uninstalled) and Profile Switch (also uninstalled) - no messing with Roms or any other software / registry customisation.
Click to expand...
Click to collapse
Try SmartLock 2.0E very good.
anhphe076 said:
Try SmartLock 2.0E very good.
Click to expand...
Click to collapse
Probably a great app, but all I want is simply to return to the default HD mini behaviour...
Change:
HKCU\\ControlPanel\Keybd\DevicelockWhenSuspend
from 0 to 1.
fighter7139 said:
Change:
HKCU\\ControlPanel\Keybd\DevicelockWhenSuspend
from 0 to 1.
Click to expand...
Click to collapse
Thanks for your help!