Hi,
Ive just got my self a HTC Touch Pro 2, and i am usinh the CSDevCTRL autoloc program. and its great. but my problem is the standby button on the phone.
The button is located on te upper left hand corner (on the top). and when i put my phone in a beltclip, the button is easily pushed. and the phone wakes up.
When the phone then is pressed against something, the autolock program locks up, and sometimes i start phoning someone.
Is there a way to put a delay on the wake up button, so u have to hold it pressed down for x sec. before it wakes up from standby?
osma101174 said:
Hi,
Ive just got my self a HTC Touch Pro 2, and i am usinh the CSDevCTRL autoloc program. and its great. but my problem is the standby button on the phone.
The button is located on te upper left hand corner (on the top). and when i put my phone in a beltclip, the button is easily pushed. and the phone wakes up.
When the phone then is pressed against something, the autolock program locks up, and sometimes i start phoning someone.
Is there a way to put a delay on the wake up button, so u have to hold it pressed down for x sec. before it wakes up from standby?
Click to expand...
Click to collapse
Er... you're in the HD2 forum. That's actually a windows question anyway, not device related, but it's certainly in the wrong forum regardless.
Maybe TP2 users have an answer for that problem - it may be common. Ask in there.
Related
I'm running Black 3.01, and the only way I can bring the device out of STANDY is with the power button. My KeyLock is set to "Lock buttons if device is locked." The device is NOT locked, just in standby, and the only button that can get it to wake up is a quick-push of the Power-Button.
I thought there was an app that said you could push ANY button to bring it out, but I can't find that on WM6 Black 3.01.
Thanks!
I asked this same question long ago with no real answer, i hate the small power button and its just to hard to find... If the power button could be relocated to the PTT that would make this phone awesome...
mitchg said:
I'm running Black 3.01, and the only way I can bring the device out of STANDY is with the power button. My KeyLock is set to "Lock buttons if device is locked." The device is NOT locked, just in standby, and the only button that can get it to wake up is a quick-push of the Power-Button.
I thought there was an app that said you could push ANY button to bring it out, but I can't find that on WM6 Black 3.01.
Thanks!
Click to expand...
Click to collapse
Start>Settings>System>Key Lock
Select "Do not lock buttons"
Hello.
My solution to this problem is to use MortSaver. It can be configured:
one press on (a specified) button sends the phone to standby
two presses on (a specified) button bring the phone back
one press on (a specified) button show the time, missed calls, mms/sms, battery and phone signal
I've assigned it to the upper right (Internet Explorer) button and it does the job well.
Best regards!
jZ
Not sure if this helps, but a friend of mine broke his power button, and now wakes his device up by ejecting and re-inseting his memory card.
So I run S2U2 and have it set to blank screen on talk. This works great since I occasionally would hang up on people or press buttons when my face touched the soft buttons on the screen. However, I also have Key Lock setup so my phone doesn't randomly come on all the time and drain the battery while it's in the holster. I also had a couple occasions (before turning on key lock) where S2U2 didn't come on and I ended up calling someone without knowing it.
Anyway, the problem I run into now is that when I'm done on the phone and want to hang up, the end call button is locked out and I have to first press power to get the screen back and then hang up. Is there something in between where I can have both the power and hang up button enabled while locked? Optimally the hang up button would only be enabled during a call so it wouldn't wake up the phone when not in use. A search brought up products like AE Buttons, but I didn't see an option to do what I want.
Thanks,
Gonz
Hi All, I have owned a lot of HTC phones and now I have the HD, its the first time I see HTC phone with such small, thin, and hard to press power button !!
especially in the dark, I cant press it and wake up my phone easily !!
I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button, but again I have new problem : sometimes when I carry my phone the volume get pressed by mistake and the ringer get muted or low and I miss some calls !!!
Any solution for this problem so I can wake up my phone from the standby without pressing the microscopic power button !!
Take out the stylus and insert it back again. That wakes up the device. Otherwise you might want to search for a G-sensor enabled "wake-up" application. "Shake_it_to_wake" so to speak...
ahmadddd said:
Hi All, I have owned a lot of HTC phones and now I have the HD, its the first time I see HTC phone with such small, thin, and hard to press power button !!
especially in the dark, I cant press it and wake up my phone easily !!
I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button, but again I have new problem : sometimes when I carry my phone the volume get pressed by mistake and the ringer get muted or low and I miss some calls !!!
Any solution for this problem so I can wake up my phone from the standby without pressing the microscopic power button !!
Click to expand...
Click to collapse
Hello
Use S2u2
facet_ said:
Hello
Use S2u2
Click to expand...
Click to collapse
How can you use it to wake up the device? I don't see that option in the description, except the default stylus in and out...
...
I guess S2U won´t help you with waking up your device but if you use volume buttons it will protect you from accidental muting your phone.
I found power hard to press, too, but then I looked closely: This power 'button' is indeed non-symmetrical - at least on *my* device: it stands up a bit on one side, the left side, which is closer to the middle of the HD. So I press it *there*, because obviously enough that's the place where the sensor is located. It works easy every time.
ducatisto said:
I found power hard to press, too, but then I looked closely: This power 'button' is indeed non-symmetrical - at least on *my* device: it stands up a bit on one side, the left side, which is closer to the middle of the HD. So I press it *there*, because obviously enough that's the place where the sensor is located. It works easy every time.
Click to expand...
Click to collapse
Thats a brilliant tip. Thank you.
david-v said:
How can you use it to wake up the device? I don't see that option in the description, except the default stylus in and out...
Click to expand...
Click to collapse
Hello , use keylock.exe and set unlocking any key + s2u2,
ahmadddd said:
I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button,
Click to expand...
Click to collapse
Can you tell me how?
Ducasito. Good observation. I wondered why sometime it was easy and sometimes hard. So the slight non-symmetrical button is not a manufacturing fault but a very subtle design feature. Now I know which side to hit. Thanks
Seems all HD's are different OR I have a very heavy finger.
All I need to do to get it to wake it lightly touch the power button and it comes on.
JanSchotsmans said:
Seems all HD's are different OR I have a very heavy finger.
All I need to do to get it to wake it lightly touch the power button and it comes on.
Click to expand...
Click to collapse
I suppose it is just a matter of "where" you push the button. Just push it on the left edge (where the small led is placed) and you will not need that much pressure to switch the device on or off. The button sensor is actually under that left edge. the picture shows the powerbutton part (picture taken from the HTC Touch HD service manual). Under the left edge of it is the sensor, so putting the pressure there is the best way of pressing the button
ahmadddd wrote:
"I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button"
my question is: how did you manage it? with a special registry key?
....since a few months I`m searching for a solution....please help me
(my fingers are too big for the Power button)
many thanks, Michael
TFH said:
ahmadddd wrote:
"I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button"
my question is: how did you manage it? with a special registry key?
....since a few months I`m searching for a solution....please help me
(my fingers are too big for the Power button)
many thanks, Michael
Click to expand...
Click to collapse
You can use AE button plus. I use this to convert my volum buttons to up and down buttons on single click, select/ok on double click, and volume on hold and press.
Thanks for your answer but I´ve a further question:
Do you "wake up" (from standby) the blackstone by using this AE button? I tried to use this software but I couldn`t wake up the Touch HD from standby by using the volume buttons.
How many of you have faced the problem:
The power button is too out of reach to bring the phone out of standby. I used Xperia x10 earlier and the phone will show the lock screen once the middle button is pressed.
However for the Desire HD, i have to somehow press the annoying power button for it to display the lock screen.
Cant there be any other button which can shopw trhe lock screen cuz to reach the power button is not so handy.
Set your screen timeout to something quick. It will lock itself then.
I don't really have this problem as have biggish hands, but I can imagine what it'd be like.
Locking is not the issue.
Unlocking is the issue. To bring the phone out of standby and to show the slide to unlock screen, one has to press the "OUT OF REACH" and designed to "AVOID ACCIDENTAL" press button at the top.
I mean the top button is already a accidental press proof position. It really is a task to first press it ans then unlock the phone. Thats 2 procedures just to make a call.
Can some one mod this?
Annoying Touch buttons
I think that the most DHD users have the same problem, touching the buttons at the bottom if you really dont want to.
So my question is if it would be possible to change the "Home" or the "Menu" button (pushing long) from "last used apps" to "turn on/off the touch keys???
that would be awsome
thx Dr.Pepper
Never been an issue for me, although i was anticipating problems with no hardware buttons its been fine...
Pepper90 said:
I think that the most DHD users have the same problem, touching the buttons at the bottom if you really dont want to.
So my question is if it would be possible to change the "Home" or the "Menu" button (pushing long) from "last used apps" to "turn on/off the touch keys???
that would be awsome
thx Dr.Pepper
Click to expand...
Click to collapse
Can't help but say, "you're holding it wrong!"
Seriously though I've never encountered this problem on either this phone or my N1 which has a smaller screen.
How exactly are you managing to press the buttons by mistake?
Regards.
iam the only one who has the problem that he accidently hits a touch key while using the phone or playing a game? every little contact triggers the keys. i.e. if i use the thumb to type a message, holding the phone in the right hand, i sometimes trigger the search key.
my idea is to make it harder to trigger these keys. as they are part of the touchscreen, it sould be possible to do anything that can be done with the touch sreen. my ideas:
1. double-touch; tapping the key 2 times (like a double-klick) triggers it once
2. sweep; i.e. you touch the home-button and sweep out of it, then release. can be even harder with sweeping out and back in.
3. circle-touch; making a little circle over the button triggers it.
other ideas welcome.
---------------------------------
2nd problem: easier unlocking;
i feel it sometimes tricky to unlock the pone, wich is done by pressing the powerbutton at the top of the phone and sweeping on the bottom of the screen. the phone is'nt very small (or i have small hands). if iam holding the phone at the bottom, i can nearly reach the whole touch area with my thumb, but to unlock, i need to use my 2nd hand or to juggle the phone so i can reach the power button with the right hand. with the G1, which had a menu button at the bottom, it was just double-pressing that button and the phone was unlocked. iam looking for a similar easy way to do it.
its just annoying to take the phone out of the pocket and use both handy or juggle around to unlock it...
i dont know it it wastes additional energy to have the touchscreen active, so it can be used to unlock the phone. so my ideas:
1. use the touchscreen to unlock; i.e. draw a pattern, press the bottom key in some order (home, back, menu to unlock)
2.1 use the volume keys. if the screen is disabled, they are used to change the audio volume (or is that only the case, if music is playing?) When holding the phone at the bottom with the right hand, the volume-down hey is easily reachable. so you can do volume-down (which activates the screen) and then slide on the screen like you would do if you have pressed the power button. pressing volume-down with deactivated screen does not change the volume, but pressing it twice does (i.e. 1st press unlocks the screen and 2nd press takes volume down).
2.2 press vol-up and vol-down at the same time to unlock the phone. if i do that the phone vibrates sometimes, no idea why.
3. use acceleromater (or a other sensor?) to unlock, i.e. shaking the phone in a special way (i.e. a circle), activates the screen, so you can unlock it by sliding on it. also full unlock by shaking a phone could be possible (also known as kung-fu-unlock )
other ideas also welcome.
Proximity sensor for unlock when taking it out of the pocket :-D. I have the same problem as you so a 'fix' would be nice
yeah, you take the phone out of the pocket and it unlocks and says "hello raw, how you are doing?".
but that would be nice. question is if constantly checking the prox sensor would drain the battery much. it needs to be checked every 3 seconds or so.
lynxboy said:
Can't help but say, "you're holding it wrong!"
Seriously though I've never encountered this problem on either this phone or my N1 which has a smaller screen.
How exactly are you managing to press the buttons by mistake?
Regards.
Click to expand...
Click to collapse
if i try to use the phone with one hand
seems like here (http://forum.xda-developers.com/showthread.php?t=854073) is another user with that problem.
same problem: http://forum.xda-developers.com/showthread.php?p=9550179#post9550179
Merged threads as topic is similar....
Cheers,
M_T_M