Related
hello everyone .
does anybody tried any 4gb minisdhc on ipaq 6900 series .
I want to know about SDHC not the regular minisd cards.
I found a driver which claim it make the card work in wm5 . --> http://forum.ppcwarez.org/viewtopic.php?f=49&t=35659
can someone confirm or tell me if the driver works or not as well as 4gb SDHC cards on ipaq 6900 ?
Thanks
I can not speak for the 4gb SDHC cards but I used a 4gb standard miniSD card in my 6945 no problems.
cheers
BR
none of the stores here sell regular 4gb. all of them have SDHC. that's why i need to know before buy one
but thanks for the reply.
http://mobilitytoday.com/forum/showthread.php?t=1618
EREZYAD said:
http://mobilitytoday.com/forum/showthread.php?t=1618
Click to expand...
Click to collapse
the link you sent, what does it do with SDHC memory cards ?
it just describes how to whatch tv !!!!
thunder6290 said:
the link you sent, what does it do with SDHC memory cards ?
it just describes how to whatch tv !!!!
Click to expand...
Click to collapse
SORRY DUE TO EDITING MASS ,I LOST "0"
http://mobilitytoday.com/forum/showthread.php?t=16180
ENJOY
AS FOR ME I DON'T RECOMMEND OF HAVING UNNEEDED INFO ON CARD AND I USE ONLY 2G ULTRA OF SUNDISK
TAKE SOME 2M WORD FILES FROM YOUR PC
COPY TO THE DEVICE
TRY TO OPEN WORD ON YOUR DEVICE,THEN YOU WILL SEE IT ACTS SLOWER (THEN TRY WITH ONLY 1M... LOOK AT THE EFFECT)
IF YOU ADD MORE AND MORE INFO TO YOUR CARD IT HAS TO FIND IT AND LET'S SAY USEING GPS SOFTWARE & HAVING MAP OF ALL THE WORLD IF YOU ARE ONLY IN N.Y. WILL NOT HALP MUCH BUT WILL GET THING SLOWER
I TRY TO DIFFRAG AND KEEP CARD CLEAN FROM UNNEEDED INFO AND ALL WORKS GRATE WITHIN 2G
I was not able to use a 4 GB SDHD with my 6915. I do not know if the card was good or not as I exchange it for a SD 2 GB
Regards,
Chris
Chris63 said:
I was not able to use a 4 GB SDHD with my 6915. I do not know if the card was good or not as I exchange it for a SD 2 GB
Regards,
Chris
Click to expand...
Click to collapse
HAVE YOU TRIED THE DRIVER IN MY LINK?
http://forum.xda-developers.com/showthread.php?t=310456&page=4
DOWNLOAD
I HAVE TESTED IT WITH A 4G SDHC AND WORKS
ON A 6G CARD IT ONLY IDENTIFIED AS 2G
YOU CAN ALSO TRY THIS DRIVER
http://forum.xda-developers.com/showthread.php?t=344338
DOWNLOAD
BUT A HAVE NOT TESTED IT ON MY 6915
GOOD LUCK
Hi everyone,
I finally bought a kingston 4gb miniSDHC and tried it on on own ipaq 6955 ( rogers branded ).
1- without the driver the card is unrecognized
2 - after installing the driver, it fully detect the card and showed 3.9gb avaialable space and it worked really fast .
3 - after a while I noticed that my programs which installed on the card in not working ( it worked at the begining ) .
4 - everytime I took the card out and insert it again, the problem was solved for few hours and again it came back
5 - the reason was it browse the card and show the folders but when I tried to see the files in the folders, it showed all the folders empty!!!!!
6 - I fromated the disk bye fat, partitioned it and steel the same,
7 - last thing I did today is that I format 2 partitions using FAT instead of FAT32.
it workes fine now, but i'll give u and update soon .
I still dont know if it is the card problem or driver problem, because i dont have any other cards ( 4gb minisdhc ) to try .
wait for more updates
I changed my card with different card ( same brand ) 4gb kingston minisdhc and still the same problem .
any sugestions ?
thunder6290 said:
I changed my card with different card ( same brand ) 4gb kingston minisdhc and still the same problem .
any sugestions ?
Click to expand...
Click to collapse
did you try fat16?
did you try formt with this software?
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
good luck
EREZYAD said:
did you try fat16?
did you try formt with this software?
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
good luck
Click to expand...
Click to collapse
the panasonic utility say it won't compateble with either card or my reader!
thunder6290 said:
the panasonic utility say it won't compateble with either card or my reader!
Click to expand...
Click to collapse
AS far as using the software (told you i'm using 2g ultra)
but i was thinkin of one more thing due to your report
power Management
i found the reg value on the 6800 ,i know it is not the same location but it is a start
try to see if you can get it for a better Management settings for the card
good luck
thunder6290 said:
Hi everyone,
I finally bought a kingston 4gb miniSDHC and tried it on on own ipaq 6955 ( rogers branded ).
1- without the driver the card is unrecognized
2 - after installing the driver, it fully detect the card and showed 3.9gb avaialable space and it worked really fast .
3 - after a while I noticed that my programs which installed on the card in not working ( it worked at the begining ) .
4 - everytime I took the card out and insert it again, the problem was solved for few hours and again it came back
5 - the reason was it browse the card and show the folders but when I tried to see the files in the folders, it showed all the folders empty!!!!!
6 - I fromated the disk bye fat, partitioned it and steel the same,
7 - last thing I did today is that I format 2 partitions using FAT instead of FAT32.
it workes fine now, but i'll give u and update soon .
I still dont know if it is the card problem or driver problem, because i dont have any other cards ( 4gb minisdhc ) to try .
wait for more updates
Click to expand...
Click to collapse
which driver did you use?
I remember reading that the 4Gb miniSD cards are unreliable in the 69xx...
there IS a list of what does and doesn't work, I think it was a HP based forum, a bit of googling should bring it up...
As far as i remember reading, the SDHC cards arent supporting in the 69xx
Ive not tried one, im happy with the 2gb minisd.
boraz6925 said:
which driver did you use?
Click to expand...
Click to collapse
i tested several ones .
the one is installing on my phone currently is ( SDHC Support Kit hurricane and QTEK9100 ) which i downloaded from this forum
EREZYAD said:
AS far as using the software (told you i'm using 2g ultra)
but i was thinkin of one more thing due to your report
power Management
i found the reg value on the 6800 ,i know it is not the same location but it is a start
try to see if you can get it for a better Management settings for the card
good luck
Click to expand...
Click to collapse
thanks for your reply. i think the registry you mentioned is the key . i worked on it for several days and still i can't figure out what settings i need to use but i think the registry you mentioned will one day solve this problem.
thunder6290 said:
Hi everyone,
I finally bought a kingston 4gb miniSDHC and tried it on on own ipaq 6955 ( rogers branded ).
1- without the driver the card is unrecognized
2 - after installing the driver, it fully detect the card and showed 3.9gb avaialable space and it worked really fast .
3 - after a while I noticed that my programs which installed on the card in not working ( it worked at the begining ) .
4 - everytime I took the card out and insert it again, the problem was solved for few hours and again it came back
5 - the reason was it browse the card and show the folders but when I tried to see the files in the folders, it showed all the folders empty!!!!!
6 - I fromated the disk bye fat, partitioned it and steel the same,
7 - last thing I did today is that I format 2 partitions using FAT instead of FAT32.
it workes fine now, but i'll give u and update soon .
I still dont know if it is the card problem or driver problem, because i dont have any other cards ( 4gb minisdhc ) to try .
wait for more updates
Click to expand...
Click to collapse
i used the driver on my 6925 looks fine for know. but my pc doesnt see the card now
boraz6925 said:
i used the driver on my 6925 looks fine for know. but my pc doesnt see the card now
Click to expand...
Click to collapse
can u please let me know which driver exatly u installed and if you replaced the two dll files or not ?
also what is your 4gb card and what brand is it .
Look If You Have My-doc On Your Card (due To Camera Etc.)
If So Try To Rename It
I have my HTC 8125 with the upgrade of wm6 and the iphone theme.... and it was working perfect until I install a program that I found in this page:
http://jay-joshi.spaces.live.com/blog/cns!851D717EDFF14CEC!3194.entry
I was trying to read sdhc memories so I try that program... well.. I install it and I couldnt read the shdc memory and then I try to come back to my old memory (and SD of 1 gb) and it couldnt read it too... so I try uninstalling the software but its the same... so.. at this point I reinstall the sofware and again uninstall but nothing happends the phone cant read my normal memory (SD), I think maybe is a driver thing... but Im not sure...
does someone have any suggestions?
Thanks
peterpunx said:
I have my HTC 8125 with the upgrade of wm6 and the iphone theme.... and it was working perfect until I install a program that I found in this page:
http://jay-joshi.spaces.live.com/blog/cns!851D717EDFF14CEC!3194.entry
I was trying to read sdhc memories so I try that program... well.. I install it and I couldnt read the shdc memory and then I try to come back to my old memory (and SD of 1 gb) and it couldnt read it too... so I try uninstalling the software but its the same... so.. at this point I reinstall the sofware and again uninstall but nothing happends the phone cant read my normal memory (SD), I think maybe is a driver thing... but Im not sure...
does someone have any suggestions?
Thanks
Click to expand...
Click to collapse
Yup tht is my blog site. Guyz anything please update on the case will append the blog...
what is the make, model and capacity of the card dude?
the card that I normally use is a Sandisk MicroSD 1gb with an adapter for miniSD....
The card that I was trying to use with the upgrade is a Sandisk MicroSDHC 4gb
The wifi doesnt work too... now I cant use the memory card slot and the wifi.... please help me with this...
Thanx
peterpunx said:
the card that I normally use is a Sandisk MicroSD 1gb with an adapter for miniSD....
The card that I was trying to use with the upgrade is a Sandisk MicroSDHC 4gb
The wifi doesnt work too... now I cant use the memory card slot and the wifi.... please help me with this...
Thanx
Click to expand...
Click to collapse
sure buddy; trying to come up with some solution asap.
dude...check following forum
http://forum.xda-developers.com/archive/index.php/t-341666.html
check solution from evojulz. Not sure if it works; my cab was for standard SDHC.
Let me know if it work out; if I have something more than post it here
it would be very helpfull to have a list of those roms which does not need a pc to flash. i am requesting all bosses to provide the list in this thread. thanks
nitol said:
it would be very helpfull to have a list of those roms which does not need a pc to flash. i am requesting all bosses to provide the list in this thread. thanks
Click to expand...
Click to collapse
All roms can be flashed this way mate, just use USPL or HSPL and use storage card method to flash
thanks for your reply boss, but my one is 1.56 olinex(once i've done it). i am using xt grid evo.
now i am trying to change my rom but i can't.
i have puted several roms(cloudy,xtgrid leo,nrg,goldlocke) in the root of my storage card and hard format my phone but my ph is not flashing with the new rom.
can any boss help me please?
i want to get rid of this trouble as soon as possible.i don't want to use any pc to flash.
what are the steps to get rid?
nitol said:
thanks for your reply boss, but my one is 1.56 olinex(once i've done it). i am using xt grid evo.
now i am trying to change my rom but i can't.
i have puted several roms(cloudy,xtgrid leo,nrg,goldlocke) in the root of my storage card and hard format my phone but my ph is not flashing with the new rom.
can any boss help me please?
i want to get rid of this trouble as soon as possible.i don't want to use any pc to flash.
what are the steps to get rid?
Click to expand...
Click to collapse
Personal experience is that any SD card larger than 2gb will not instal new Rom's
Cards smaller than 2gb work fine.
Yours may be different but try and see. If you do not have a small SD card they are very cheap these days mate
thanks for your suggesion boss. i've tryed as you said,used an one gb sd card.but the result is same.what to do now? i need help.please somebody give me a solution.
thanks
May I ask why you don't try pc method?
sure sir,my pc is disturbing,not only that,most of the time i used to brouse through my phone because due to my business i can't find enough time to sit infront of my pc.that's why i need help about storage card method.
nitol said:
it would be very helpfull to have a list of those roms which does not need a pc to flash. i am requesting all bosses to provide the list in this thread. thanks
Click to expand...
Click to collapse
as mentioned, ALL ROMs are capable of being flashed to a phone through SD Card. But since you are a new member, you might need to think of these:
1. did you have the correct filename of the nbh file inside your card?
it should be "BLACIMG.nbh" and must be placed at the root of your card.
2. do you know how to go to the bootloader mode(tri-color screen)?
phone off --> hold "voldown" and short press "power" button
it MUST be working.
thanks for your rep. sir, offcourse i know how to do that,i've tested most of the roms till april'10.last 3months i did not try any.but from till last few days i am trying to change my rom and non of them are working. i am using "xt grid evo", my redio is latest,i am taking rom into the root of my sd card,i am hard formating. but nothing works.
i don't know why,nobody knows why...
You have to rename the ROM image to "BLACIMG" before putting it onto your SD card. I use an 8GB card and have never had a problem.
alchopop said:
Personal experience is that any SD card larger than 2gb will not instal new Rom's
Cards smaller than 2gb work fine.
Yours may be different but try and see. If you do not have a small SD card they are very cheap these days mate
Click to expand...
Click to collapse
i have 4gb card and have room and i can flash new rom
gagi75 said:
i have 4gb card and have room and i can flash new rom
Click to expand...
Click to collapse
Like I said, your experience may be different. My 8gb card WON'T workm my 2gb card does work. Go figure
alchopop said:
Like I said, your experience may be different. My 8gb card WON'T workm my 2gb card does work. Go figure
Click to expand...
Click to collapse
i think you have to format youre 8gb sd card to fat 32
i also use a 8 gb card without any problems AFTER i formatted it
miniterror said:
i think you have to format youre 8gb sd card to fat 32
i also use a 8 gb card without any problems AFTER i formatted it
Click to expand...
Click to collapse
I think i have a dodgy card because every time i try to use it on my pc it ask's to check for errors. I have done that several times, copied everything to and from the PC to format it and it still has problems. It works OK in the phone though so I just accept the status quo and flash from the smaller card. Going to upgrade soon so will probably get a new SD card then and see if my experience changes after that. Thanks for your help though
hey hey hey what about my problem? i'm still stucked,can't flash any rom in sd card method. i always download them from my ph. rename BLACIMG.NBH,hard format but no result.my one is 16 gb. i've tryed on 1gb also but not working.
should i rename it through my pc?then copy to my sd card and hard format?
WHAT IS MY SOLUTION SIR?
nitol said:
hey hey hey what about my problem? i'm still stucked,can't flash any rom in sd card method. i always download them from my ph. rename BLACIMG.NBH,hard format but no result.my one is 16 gb. i've tryed on 1gb also but not working.
should i rename it through my pc?then copy to my sd card and hard format?
WHAT IS MY SOLUTION SIR?
Click to expand...
Click to collapse
It should be renamed "BLACIMG.nbh" NOT "BLACIMG.NBH"
Note LARGE caps AND small caps
When you reboot the phone hold down the Volume down button until the bootloader shows then wait till it reads the card. Then press power button and it will start ti flash the new ROM
Good luck
sir,i know about cap & small matter. acutally i rename "BLACIMG.nbh" but not working....
nitol said:
sir,i know about cap & small matter. acutally i rename "BLACIMG.nbh" but not working....
Click to expand...
Click to collapse
All i can suggest then is try a new card mate. Like i said before, I have a card that does work and a card that won't work
i've also tryed in a 1gb card sir.anyway,no solution for my problem, bosses can close this thread.
thanks to all
for 1st time i hear someone to have problem flashing because of the SD card!
From 2 years i flash only from the SD card and im with the default 8GB Sandisk that comes with the Phone when i bought it.
So like already many peoples say the answer is
ALL Roms can be flashed with the SD Card methood
hi
i do all steps and i install android room in internal memory of my htc hd2
android work without problems except proplem itry many rooms to fix it
but it still present
the problem is
the external memory card not work on android but working with wm6.5
if any one can help me plz
thanx
alibelker said:
hi
i do all steps and i install android room in internal memory of my htc hd2
android work without problems except proplem itry many rooms to fix it
but it still present
the problem is
the external memory card not work on android but working with wm6.5
if any one can help me plz
thanx
Click to expand...
Click to collapse
I realise that English is probably not your first language, but we need a bit more information before anyone can help you.
Which Nand build did you install?
Which sdcard are you using?
Did you backup and format the sdcard and try again?
thanx
i use the
DFT_LEO_NAND_Android
JDMS
both are with the same problem
the card is sandisk 8 gb micro sd
yes iformat the card before the use
many of my freinds on web found same result
so plz can u help us and thanx
alibelker said:
thanx
i use the
DFT_LEO_NAND_Android
JDMS
both are with the same problem
the card is sandisk 8 gb micro sd
yes iformat the card before the use
many of my freinds on web found same result
so plz can u help us and thanx
Click to expand...
Click to collapse
Try going in settings>sd&phone storage and mount/unmount the card and see if this works for you.
There were other posts here with the same problem, try searching this forum and see if someone fixed it.
also check if its formated as fat32.
when i go to setting---sd card and phone memory---ifound the devise not descover sd card ((but the same card work with wm6.5))
i search for 3 days in the web to fix the problem
((many of the users with the same problem))
ifound some pepole asking the same Q but without answer
thanx
yes fat 32 but problem still present
idont know what ido
alibelker said:
yes fat 32 but problem still present
idont know what ido
Click to expand...
Click to collapse
Do a hard reset. /format the card - find the panasonic format utility - do a search here/ flash radio 2.15.50.14. Flash hspl 2.08. Flash Magldr. Flash another NAND Android and see if there is still the same problem.
You can skip all but flashing a new build, but the problem might be somewhere in there.
This should clean the whole device and might fix the problem.
alibelker said:
yes fat 32 but problem still present
idont know what ido
Click to expand...
Click to collapse
I`ve had the same problem with 8 gb Kingston class4 microSD. Search "Panasonic SD Formater" on google, download, and format you memory card with it. it worked for me, I hope it will work for you too. Good luck
thanx
thanx
thanx
it work......
Hi,
I´ve just flashed WP7 on my HD2 but I can´t find my WLAN network It is searching now for 30 minutes and it still can´t find it. Does someone have an idea?
thanks in advanced!
greets!
SOLVED: Just PUT OUT your SD CARD and RESTART your PHONE!!!
I am having the same problem. Im on latest radio as well...
Edge/3G are working though
I had the problem too, it was because of the mac id. It's not my actual mac id so I assume it's a fixed one. Just add this one to your router and it should work.
00:18:41:17:4e:5f
I saw the same issue regarding the wifi posted in some other threads as well - Someone mentioned that when they took out the sd card or something and restarted the phone the wifi worked - Can be given a shot - just a suggestion -
SD Card out and it should work.... at least it did for me!
Hell yes it works!!! Thank you so much!!!
hi every one
my router has a pass
the wifi find the router but when i insert the pass, show me this massage
password incorrect
but it is true password!!!
i remove the sd card but not working
PLZ help me
SD Card Question
Won't removing the SD card corrupt the system memory settings? I remember reading somewhere that WP7 integrates the SD card memory as integrated memory on start up. So, I am assuming that if you remove the card to correct the WIFI issue won't the phone crash or at the least not recognize the storage space designated by the SD card?
Also, were you doing this while the phone was off and then powering it back on, or did you physically remove the memory card while running, and connect to WIFI and then re-inserted the SD back again? Just curious.
guamhtc said:
Won't removing the SD card corrupt the system memory settings? I remember reading somewhere that WP7 integrates the SD card memory as integrated memory on start up. So, I am assuming that if you remove the card to correct the WIFI issue won't the phone crash or at the least not recognize the storage space designated by the SD card?
Also, were you doing this while the phone was off and then powering it back on, or did you physically remove the memory card while running, and connect to WIFI and then re-inserted the SD back again? Just curious.
Click to expand...
Click to collapse
well i don't know by me everything worked after that becouse wp7 didn't recognize my sd sadly i hope if i buy a new one that, that one will work
Good Job you found a fix
badassballer said:
I saw the same issue regarding the wifi posted in some other threads as well - Someone mentioned that when they took out the sd card or something and restarted the phone the wifi worked - Can be given a shot - just a suggestion -
Click to expand...
Click to collapse
It was me ... but now i had another problem, WP7 don't format my sd card and make partition as it should i tried to install wp7 again but the same story is happened...
P.S i'm using SD that comes with hd2 originally it is sandisk 2gb
masoud_119592 said:
hi every one
my router has a pass
the wifi find the router but when i insert the pass, show me this massage
password incorrect
but it is true password!!!
i remove the sd card but not working
PLZ help me
Click to expand...
Click to collapse
help me plz
my contacts and mail not syncing
help
help
help
show the password incorrect... but its true
hellllpppppp
miroalex said:
It was me ... but now i had another problem, WP7 don't format my sd card and make partition as it should i tried to install wp7 again but the same story is happened...
P.S i'm using SD that comes with hd2 originally it is sandisk 2gb
Click to expand...
Click to collapse
I have the same problem
MACBLACK91 said:
I have the same problem
Click to expand...
Click to collapse
its easy...
first go to command prompt and type this commands
diskpart
(wait)
(now type) LIST DISK
this is a list of your hard disks and you must found your memory card from this list
ATTENTION: if you choose wrong partition you lost your data!!!
...
this is a example of that list:
DISK 0 : 500 GB
DISK 1 : 300 GB
DISK 2 : 7800 MB
when found your disk who you want to format it, type
SELECT DISK...
(...) is disk number
wait and enjoy it!
masoud_119592 said:
its easy...
first go to command prompt and type this commands
diskpart
(wait)
(now type) LIST DISK
this is a list of your hard disks and you must found your memory card from this list
ATTENTION: if you choose wrong partition you lost your data!!!
...
this is a example of that list:
DISK 0 : 500 GB
DISK 1 : 300 GB
DISK 2 : 7800 MB
when found your disk who you want to format it, type
SELECT DISK...
(...) is disk number
wait and enjoy it!
Click to expand...
Click to collapse
hey thanks but what is this for ? sry for the stupid question i just did it but it didn't format nothing do i have to write it in?
MACBLACK91 said:
hey thanks but what is this for ? sry for the stupid question i just did it but it didn't format nothing do i have to write it in?
Click to expand...
Click to collapse
ohhhh... forgot it!
past you choose your disk
type:
clear
......
and nothing
excuse me... forgot last step
masoud_119592 said:
help me plz
my contacts and mail not syncing
help
help
help
show the password incorrect... but its true
hellllpppppp
Click to expand...
Click to collapse
Hello hamshahri,
For me to be able to help you I need to know which steps of flashing WP7 and ACTIVATION of it have you finished already??
masoud_119592 said:
ohhhh... forgot it!
past you choose your disk
type:
clear
......
and nothing
excuse me... forgot last step
Click to expand...
Click to collapse
so this way SD will be recognized by WP7 ? am i right?
miroalex said:
so this way SD will be recognized by WP7 ? am i right?
Click to expand...
Click to collapse
what???
no, with this way your SDcard completely format and you can use it again with ram readers
masoud_119592 said:
hi every one
my router has a pass
the wifi find the router but when i insert the pass, show me this massage
password incorrect
but it is true password!!!
i remove the sd card but not working
PLZ help me
Click to expand...
Click to collapse
Same problem here.
I have not activated the live services yet, I have only installed wp7 and am trying to connect to my router (smoothwall). 3g/2g works though.
Anyone figure this out yet?