Dear friends,
I just got my HD2 yesterday, and was configuring everything on it - touchflo detacher and Pocketbreeze - and everything worked fine. But then, I tried to install the Phonealarm which I use in combination with Pocketbreeze on my primary (alternative) homescreen, and when installing it the phone asked for a restart... never to come back again.
I had to hard reset! I tried again this time without installing anything prior to the phonealarm, and again a hard reset was required. It seems that the phonealarm does not work well with my HD2 (i am using phonealarm 2.14 but also tried 2.31).
So I need an alternative for phonealarm which workd on HD2 - I would need it to display a clock and missed calls and messages... anything you are using? Or maybe an alternative to get phonealarm working? (the problem is the phone immediately locks up after restart...)
Thanks,
Franklin
You may try SBSH Phone Weaver. This software can work well with Sense and you can see the active phone profile at the task bar. Most of the profile switching is finger friendliness but the confriguration setting will be update later for more finger friendliness as per the developer.
I'm using 2.31b and it works flawlessly...it's ALWAYS the very first app I put on my phone as I can't live without it!!
you can get the latset version from the support forums
I don't have an HD2, but I know there are several folks using HD2 with PhoneAlarm without issues. I'm using the just released version 2.31 and it works great.
You may need to totally uninstall 2.14. It may leave a registry key to enable PA in your Today settings, which can cause problems. 2.31 does not do that and defaults to Host mode.
you can try g-alarm.. it works great on my phone and it really does the job (i am a heavy sleeper)
Me using phonealarm 2.30 without any issues whatsoever.
I am using phonealarm in the pahost mode, i.e. where the skin is called by pressing an icon which I have placed on my homescreen shortcuts.
srmz said:
Me using phonealarm 2.30 without any issues whatsoever.
I am using phonealarm in the pahost mode, i.e. where the skin is called by pressing an icon which I have placed on my homescreen shortcuts.
Click to expand...
Click to collapse
You should try 2.31, which was just released last week. It has a more stable PAHost and it also includes some programming that will allow you to use Kisja's tweak to access PAHost and show your current profile on the Sense titlebar (replaces your carrier info). I don't have a link for that tweak, but there is some info on it in the PhoneAlarm skins forum.
vi_rus said:
you can try g-alarm.. it works great on my phone and it really does the job (i am a heavy sleeper)
Click to expand...
Click to collapse
Two totally different products...
GAlarm is an alarm program.
PhoneAlarm is a full-featured phone profile program, which can control almost every aspect of your phone, managed by customizable profiles which can be switched on and off by various events (time, location, connection status, etc.) or individually through the skin. The interface is fully customizable and skinnable too. It's always the first thing I install on my WM devices.
PhoneAlarm/PocketShield Problem
Thought i'll post a PhoneAlarm problem here instead of starting a new thread.
I am using HD2/PhoneAlarm/PocketShield.
The problem is,PhoneAlarm fails to switch profile based on location while the screen is locked.But as soon as i unlock the screen,phonealarm changes profile if i am in a new location.
It looks like screen lock is disabling phonealrm.
I tried adding phonealarm to authorized programmes list in pocketshield but it is not listed there.
Any solution friends?
nessqn said:
Thought i'll post a PhoneAlarm problem here instead of starting a new thread.
I am using HD2/PhoneAlarm/PocketShield.
The problem is,PhoneAlarm fails to switch profile based on location while the screen is locked.But as soon as i unlock the screen,phonealarm changes profile if i am in a new location.
It looks like screen lock is disabling phonealrm.
I tried adding phonealarm to authorized programmes list in pocketshield but it is not listed there.
Any solution friends?
Click to expand...
Click to collapse
The screen lock should not disable phoneAlarm, but it can hinder profile switching if it is going to sleep. I'm curious though, are you using it in PAHost mode?
In the phoneAlarm power user options (phoneAlarm_User.cfg), there is a setting called "forceLocationWakeup". Do you have that set to "1"? Allso, make sure the comment hash (') is removed from the beginning of that line. Setting "forceAutoProfileWakeup" to "1" might also help.
hefman said:
The screen lock should not disable phoneAlarm, but it can hinder profile switching if it is going to sleep. I'm curious though, are you using it in PAHost mode?
In the phoneAlarm power user options (phoneAlarm_User.cfg), there is a setting called "forceLocationWakeup". Do you have that set to "1"? Allso, make sure the comment hash (') is removed from the beginning of that line. Setting "forceAutoProfileWakeup" to "1" might also help.
Click to expand...
Click to collapse
Yes,the host mode is on by default.
I also did the tweaks u mentioned.
There is no problem in profile switching unless "location" is introduced.
May b i am using wrong settings.These are the changes i require;may b u can help me with the settings:
10.30AM:change to HOME(from SILENT)
change to CAR(based on location:Leave Home location group):Not changing unless i unlock screen
change to OFFICE(based on location:Office location group)Not changing unless i unlock screen
change to CAR(based on location:Leave Office location group)Not changing unless i unlock screen
change to HOME(based on location:Home location group)Not changing unless i unlock screen
3.00AM:change to SILENTNot changing at all
nessqn said:
Yes,the host mode is on by default.
I also did the tweaks u mentioned.
There is no problem in profile switching unless "location" is introduced.
May b i am using wrong settings.These are the changes i require;may b u can help me with the settings:
10.30AM:change to HOME(from SILENT)
change to CAR(based on location:Leave Home location group):Not changing unless i unlock screen
change to OFFICE(based on location:Office location group)Not changing unless i unlock screen
change to CAR(based on location:Leave Office location group)Not changing unless i unlock screen
change to HOME(based on location:Home location group)Not changing unless i unlock screen
3.00AM:change to SILENTNot changing at all
Click to expand...
Click to collapse
A couple of quick questions:
When you say it works when you unlock the screen, is the device in standby or just locked when you test this?
You do have Location Service enabled in your settings, correct?
What are you using in settings for location (wifi, towers, etc.)?
What lock are you using? WM default, S2U2, etc.?
Also, which version of phoneAlarm are you using?
It's been a while since I used any location switching. I found using towers was sketchy and waking to use GPS was draining my battery. I don't recall it having problems like this though. You might get a little more help on the Pocketmax forum for this, but I'll see what I can figure out. I may test this later today...
hefman said:
A couple of quick questions:
When you say it works when you unlock the screen, is the device in standby or just locked when you test this?
You do have Location Service enabled in your settings, correct?
What are you using in settings for location (wifi, towers, etc.)?
What lock are you using? WM default, S2U2, etc.?
Also, which version of phoneAlarm are you using?
It's been a while since I used any location switching. I found using towers was sketchy and waking to use GPS was draining my battery. I don't recall it having problems like this though. You might get a little more help on the Pocketmax forum for this, but I'll see what I can figure out. I may test this later today...
Click to expand...
Click to collapse
I'm using pocketshield.The device is locked.
I do have Location Service enabled in settings.
I' usin cell towers.
If the location based profile is active,time based change isnt happening.For eg:
My profile changes to HOME based on location at night.But HOME wont change to SILENT based on time at 3.00 AM even if i unlock the phone,
if i am staying at same location.
Similarly,CAR profile gets activated at 1.00PM,based on time(I have changed it to time based instead of location as i park my car very near to my house).But it wont change to WORK based on location unless i unlock the phone,after i reach office(the office os 25 kms away).I mean,the profile changes immediately as sn as i unlock the phone.(from pocketshield lock screen).I'd mailed pocked shield n they replied to contact phonealarm.
The phoneAlarm is 2.4.
I did post it in pocketmax forum n got the reply to send them the log file:http://www.pocketmax.net/smf/index.php?topic=8253.msg0;boardseen#new
nessqn said:
I'm using pocketshield.The device is locked.
I do have Location Service enabled in settings.
I' usin cell towers.
If the location based profile is active,time based change isnt happening.For eg:
My profile changes to HOME based on location at night.But HOME wont change to SILENT based on time at 3.00 AM even if i unlock the phone,
if i am staying at same location.
Similarly,CAR profile gets activated at 1.00PM,based on time(I have changed it to time based instead of location as i park my car very near to my house).But it wont change to WORK based on location unless i unlock the phone,after i reach office(the office os 25 kms away).I mean,the profile changes immediately as sn as i unlock the phone.(from pocketshield lock screen).I'd mailed pocked shield n they replied to contact phonealarm.
The phoneAlarm is 2.4.
I did post it in pocketmax forum n got the reply to send them the log file:http://www.pocketmax.net/smf/index.php?topic=8253.msg0;boardseen#new
Click to expand...
Click to collapse
Interesting.
I'm running the 3.0beta and it has some new logic for profile switching. It works well for me.
Anyway, sending log files to Bruce is the way to go. He's very quick in figuring problems out and very helpful.
Related
## TamerSpClock v1.4 ##
Last update 13 Dec 2008
"TamerSpClock" is a Windows Mobile 2003/5/6 software which lets you take hand over your time to the max. It is a fully customizable speaking clock & a chimer.
- you can choose a THEME of time intervals of 1 ,5 ,15 ,30 or 60 minutes ,Then you can choose actions to be done on these choosen theme intervals.
- you can adjust when to speak time or chime and when to mute in a way that differs from other programs by means that you can set multi portions (intervals) of time that mute the program automatically for daily use. you can access the file "Validity.ini" found in the folder named "settings" inside the program installation path. this file can be edited by any notepad or word (pocket or pc word) then you can specify at what hours to work on and what to mute (just Change validity = 0 corresponding to hours that needed to be muted & Change validity = 1 to the rest of the hours).
- The program can wake up the device without waking up your screen conserving your battery life and will chime even if the ppc is sleeping or in a deep sleep, The software have a feature that can force the screen not to wakeup (BlackMe feature) at chiming times or (if you choose to) to leave it to the current windows mobile configurations (settings) to decide ,this is useful for some ppc that wakeup the display on every chime which may have negative results on battery life.
- you can put your own wav files to be chimed ,just insert them in folder "Wav" found inside installation directory but use the same names of course.
- This software differs from other similar products in that if you choose for example 15 minute iterval for speaking the clock ,it wll activate itself and speak time on whole miute numbers like 15-30-45-60 and will not just repeat the choosen interval starting from the time you switched it on which results in speaking times like 4:52 and 7:27 etc.
- you can choose or omit salutations like "the time is" & "Am ,Pm" & saying "Oclock" at the whole number hours. this can be customized using the provided links to enable and disable the action features.
- you can choose whether to use vibration or no with the chiming process.
- you can stop all software processing events by one finger click.
- Software will automaticaly activate itself and work again after any restart of the device.
- you can set an action like signal check to work with Themes (feature to check signal strength every x time) if the signal drops ,it will announce you with an alarm ,this feature only works if the phone is on and the signal is less than 40%.
- you can set an action like Zekr which can help Muslims remember their Lord every 5 minutes with a low volume sound saying God is the most Great. This option acts solely without dependency of the choosen theme interval since it have a fixed firing every 5 minutes (take it or leave it).
# How to install Cab file of TamerSpClock:
1- For versions prior to v1.4 you must download MortScript from the following link
(Version v1.4 & above already have it embedded inside software)
http://www.sto-helit.de/index.php?mo...=view&entry=65
This software acts like an environment for "TamerSpClock" to work. please note that "TamerSpClock" cannot run without installing this software.
2- Transfer cab to any place on your ppc using active sync or any other communicating software.
3- Choose whether to install to Device or to MemoryCard ,It is very important to choose the installation target location during the setup process corresponding to the version you downloaded whether it is on memory card or on phone. Note that program is hard coded ,this is why this point is very important for the program to work.
4-For Version v1.4 & above before running program ,press the icon named "RunFirst" prior to run the program (This acts as if MortScript Cab is installed)
This software had been tested on HTC Tytn & found stable ,Also can work on any windows mobile device.
I have been looking for an hourly chimer that does not wake up the screen. The disappointing thing about this one it it is hard coded to run from the storage card. Can this be modified to use variable paths?
One issue I have with installing to the storage card is Windows Mobile unmounts the card to save power on some devices. I also change my card based on what I am doing. I keep my maps on one card and my MP3s on another.
painter_ said:
I have been looking for an hourly chimer that does not wake up the screen. The disappointing thing about this one it it is hard coded to run from the storage card. Can this be modified to use variable paths?
One issue I have with installing to the storage card is Windows Mobile unmounts the card to save power on some devices. I also change my card based on what I am doing. I keep my maps on one card and my MP3s on another.
Click to expand...
Click to collapse
Added 2 versions ,one if you want to setup on the Phone Main Memory & the other for Storage Card.
This really sounds great - but how to use it?
I am no expert in programming or in mort scripting.......
I would like to use this feature: "you can set an action like signal check to work with Themes (feature to check signal strength every x time) if the signal drops ,it will announce you with an alarm ,this feature only works if the phone is on and the signal is less than 40%."
But no speaking clock, only those alert, when signal drops.
It should check every minute.
What do I have to enable/disable for that?
And how to let it run, when my touch is sleeping?
Thanks!
I'm using a TyTN II. Great software.
Like to feedback that when I was using my bluetooth headset, when the phone is off (no display), announcing (audio) could be heard and vibration. When I don't use the bluetooth headset (bluetooth is off), and phone is off (no display), I don't hear any announcement and there is vibration only. If I turn on the phone now, I will hear the end part of the time announcement.
Is this normal?
Thanks.
zard said:
I'm using a TyTN II. Great software.
Like to feedback that when I was using my bluetooth headset, when the phone is off (no display), announcing (audio) could be heard and vibration. When I don't use the bluetooth headset (bluetooth is off), and phone is off (no display), I don't hear any announcement and there is vibration only. If I turn on the phone now, I will hear the end part of the time announcement.
Is this normal?
Thanks.
Click to expand...
Click to collapse
Zard .. if you enable the black me feature the speaking clock can be capable of walking up the device to say time at chosen theme points without walking up the screen. So i advice you to enable the blackme feature as long as the phone is in your pocket. if you are using the phone for an instance or a period of time you can disable the blackme feature since when you are using the phone the feature will be annoying.
in some devices (devices differ in reaction to wakeup) the phone cannot wake up to say the time if it is sleeping ,this is why i made the blackme feature. So the solution is to enable it.
Also if you go to programs menu in the start button you will see a pack on enable & diable features. you can choose what ever you like to enable and what to diable.this features can be clicked (enabled or disabled) & once confirmed you will notice that it will be active wherever any theme is choosen. iam sure that the blackme feature is able to walking up the device to say the time whether your device is in sleep or deep sleep.
kino-kino said:
This really sounds great - but how to use it?
I am no expert in programming or in mort scripting.......
I would like to use this feature: "you can set an action like signal check to work with Themes (feature to check signal strength every x time) if the signal drops ,it will announce you with an alarm ,this feature only works if the phone is on and the signal is less than 40%."
But no speaking clock, only those alert, when signal drops.
It should check every minute.
What do I have to enable/disable for that?
And how to let it run, when my touch is sleeping?
Thanks!
Click to expand...
Click to collapse
Kino-Kino .. first of all open the start menu programs ,you will find 2 folders ,one is named enable & the other named disable. now you are ready to open each and click what ever features you like to be enabled and whatever to be disabled.
At this time you are ready to go for the Theme selection which means at what intervals you want the choosen features to fire ,you can try the "01M" which means that the software will fire every 1 minute to execute the selected feature (or features if you choose others).
For example ,if you want only the signal detection feature ,go to disable folder and click all features to disable them all ,then go to enable and only click the shortcut named "Signal".
Once done .. every 1 minutes (since we choosed "01M") the phone will execute the selected feature (or features). in some phones the system cannot walkeup itself to execute the so called notification tasks at given times if it was in "Sleep" or "Deep Sleep Mode". So you can check your phone reaction to such notification tasks.
To make sure we are ready to go ,you must check first that your phone registry key when the phone is on and receiving signal looks like this :
[HKEY_LOCAL_MACHINE\System\State\Phone] the value of "Cellular System Available" must be 65
to do this test just download Fred Taskmanager free from this link
http://www.dotfred.net/TaskMgr.htm
once downloaded install it ,open it and go to RegEdit tab and go to [HKEY_LOCAL_MACHINE\System\State\Phone] & check for "Cellular System Available" number .. it must be (65) i mean the number between brackets.
If this is the case ,the program will correctly do the job. but if it isnt (may vary from phone to another) ,then this number must be modified in the software to read correctly ,Go to program installation folder " \Program Files\TamerSpClock\Data\Signal.mscr " rename the file "Signal.mscr" to "Signal.txt" then open it by any notepad or word ,then check the line "if(%PhoneActive% = 65)" and change the 65 to be like the number that you found for your phone in the normal signal state. Do not forget to rename it back once finished to "Signal.mscr".
Thanks
Thanks going to test on my lovly hima.
Thank You for Your reply!
I think, there could be a problem:
The reg key, You mentoned, does have different values.
If I am connected to a "GPRS" network, it is "1".
If I am connected to an "EDGE" network, it is "8".
And if only phone is active, but no internet-connection, it is "1".
So what should I take?
Thank You!
EDIT: There is another key called "Radio ready state" with the value "31".
And all value are "0" when radio is off.
kino-kino said:
Thank You for Your reply!
I think, there could be a problem:
The reg key, You mentoned, does have different values.
If I am connected to a "GPRS" network, it is "1".
If I am connected to an "EDGE" network, it is "8".
And if only phone is active, but no internet-connection, it is "1".
So what should I take?
Thank You!
EDIT: There is another key called "Radio ready state" with the value "31".
And all value are "0" when radio is off.
Click to expand...
Click to collapse
The reply is that you take the number between brackets on the idle state without conecting to any network ,because the idea as you can see from the code that there is 2 conditions must be fullfilled to fire the signal alarm which is 1- if the signal in the idle state be so and so and 2- in the same time signal drops to so and so ... Bingo ... fire
So ,now you got the idea of the code & can now modify it to fullfils your needs ,and you are ready to put your constants that reflects the state where you want spclock to fire. wishing this could help .....
timoz73 said:
Zard .. if you enable the black me feature the speaking clock can be capable of walking up the device to say time at chosen theme points without walking up the screen. So i advice you to enable the blackme feature as long as the phone is in your pocket. if you are using the phone for an instance or a period of time you can disable the blackme feature since when you are using the phone the feature will be annoying.
in some devices (devices differ in reaction to wakeup) the phone cannot wake up to say the time if it is sleeping ,this is why i made the blackme feature. So the solution is to enable it.
Also if you go to programs menu in the start button you will see a pack on enable & diable features. you can choose what ever you like to enable and what to diable.this features can be clicked (enabled or disabled) & once confirmed you will notice that it will be active wherever any theme is choosen. iam sure that the blackme feature is able to walking up the device to say the time whether your device is in sleep or deep sleep.
Click to expand...
Click to collapse
Thanks, with Blackme, it works now.
dont work with my diamond
great sharing.
thanx.
Dynomite232 said:
dont work with my diamond
Click to expand...
Click to collapse
Dynomite232 ,Kindly feedback whether the mortscript program didnt run on diamond or the TamerSpClock itself. i didnt expect this to happen from the Diamond of a VGA screen since my software didnt realy have a User Interface Menu ,its only shortcuts. In addition that Mort do support any windows mobile device.
Thanks again helping me, I think, I start to understand what Your mortscripts are able to do!
But I have to ask once more:
So I have three different scenarios, when I would get that signal-alert:
1 If Cellular Systam Available is "8" AND signal drops to less than 40%
and
2 If Cellular System Available is "1" AND signal drops to less than 40%
and
3 If Cellular System Available is "0" WITHOUT checking the signal strength
So would it be possible to edit the Mortscript this way?
Thank You!!
Reply to Kino-Kino
kino-kino said:
Thanks again helping me, I think, I start to understand what Your mortscripts are able to do!
But I have to ask once more:
So I have three different scenarios, when I would get that signal-alert:
1 If Cellular Systam Available is "8" AND signal drops to less than 40%
and
2 If Cellular System Available is "1" AND signal drops to less than 40%
and
3 If Cellular System Available is "0" WITHOUT checking the signal strength
So would it be possible to edit the Mortscript this way?
Thank You!!
Click to expand...
Click to collapse
Kinio-Kino for your described situation the case will be as follows (copy & paste what is below between the # signs to replace what is inside Signal.mscr ,you can find this file inside a folder called Data inside the program folder inside Program Files)
###################################################################
ErrorLevel ("syntax")
SignalStrength = RegRead("HKLM", "System\State\Phone", "Signal Strength" )
PhoneActive = RegRead("HKLM", "System\State\Phone", "Cellular System Available" )
if(%PhoneActive% = 0)
PlaySound "\Storage Card\Program Files\TamerSpClock\Wav\Signal.wav"
endif
if(%PhoneActive% = 8)
if (%SignalStrength% < 40 )
PlaySound "\Storage Card\Program Files\TamerSpClock\Wav\Signal.wav"
endif
endif
if(%PhoneActive% = 1)
if (%SignalStrength% < 40 )
PlaySound "\Storage Card\Program Files\TamerSpClock\Wav\Signal.wav"
endif
endif
###################################################################
You can now Download the latest version v1.03 ,I build a new user interface for this software instead of the icons .Before Uninstalling Do the process of "StopingAll" feature then make a new Install to v1.03.
.
Hi,
first, thank You again, its working now as expected, great!!
The new Version 1.3: Both cabs get installed to the main memory, maybe something went wrong with one of them?
And one more question:
When my phone is sleeping, I dont get those signal-alerts.
So You have Your blackme-feature:
How could I handle that, to get the hardware-buttons locked, when blackme is active? I have a HTC Touch.
Thank You!
kino-kino said:
Hi,
first, thank You again, its working now as expected, great!!
The new Version 1.3: Both cabs get installed to the main memory, maybe something went wrong with one of them?
And one more question:
When my phone is sleeping, I dont get those signal-alerts.
So You have Your blackme-feature:
How could I handle that, to get the hardware-buttons locked, when blackme is active? I have a HTC Touch.
Thank You!
Click to expand...
Click to collapse
kino-kino ,Welcome again & thank you for your feedback. The Cab file targeting the storage card have been updated in the main thread page.
you are asking now about 2 subjects ,the first one concerning the signal alert didnt fire during deep sleep of the phone ,i think you might try to make the speaking clock feature active along with the signal alert feature ,maybe it will wakeup your device to fire at the specified times, of course if its voice is annoying to you can try deleting the clock wav files but leave of course the signal.wav without deleting. I wonder this happens to you although my Htc Tytn wakeup and fire Signal Alerts at specified times.
The second question can be solved simply by downloading "HomeScreenPluPlus" from the following link:
http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm#Download
This software is free and have a feature in the second UI page of options that lock your device when the screen is off and vice versa ,see this pic for explanation.
Thanks for your great app, but I have troubles with BlackMe feature. If this feature is disable, my phone doesn't speak, vibrate only. But if it's enable, it turn off the phone screen when speaking time. That's annoy when I'm doing something on my phone, especially while downloading a large file, it interrupts the wifi connection and I have to re-download from beginning. Any solution for that?
hung_ng said:
Thanks for your great app, but I have troubles with BlackMe feature. If this feature is disable, my phone doesn't speak, vibrate only. But if it's enable, it turn off the phone screen when speaking time. That's annoy when I'm doing something on my phone, especially while downloading a large file, it interrupts the wifi connection and I have to re-download from beginning. Any solution for that?
Click to expand...
Click to collapse
yes i know hung_ng ,i made the blackme feature as a separate item in folder links so that you can assign its icon to a hardware button to be easily accessed so that when you are using your phone you can easily deactivate BlackMe.
This annoying feature (from my point of view as you eaxactly) is essential in many phones ,as the system cannot wakeup the device from a deep sleep to do the choosed actions. the blackme feature (also known as "ToggleDisplay=1") force the phone to wakeup to fire the action. if it is disabled many devices will fall in deepsleep without being able to wakeup. the last version 1.3 have this separate shortcut that i explained.
Another idea i made in my Tytn and made me feel comfortable is that i made my telephone sense when a specific window is open ,the blackme is disabled automatically and when i close this window it reverts automatically to be enabled. for example i made RescoExplorer2007 window when it is opened the blackme is disabled & serving me while i work ,and once i finish i close Resco and automatically blackme returns active and conserving my battery life.
Sorry for being long in my explanation but if you are interested in the idea ,i can make a version for you that is capable of deactivating BlackMe once a specific window is opened. i am not a programer ,i am an Architectural Engineer that once upon a time needed this software and didnt find a really satisfying one available all over the internet ,so i decided to learn Mort Script and i write a one satisfiying my needs and by the way i think that it might help other people who might need it as me.
This may be more of a question specific to WM 6.1 than the Treo Pro itself. I really enjoy using a program that acts as a client to control and listen to my police scanner called Win500. (Main reason for buying Treo Pro with WM). It's a program that uses a custon TCP port via either wifi or evdo. My problem/goal is... I want to turn off the backlight and keep this app running.
I have played with what I think are all my options. Telling the device to turn off backlight after 30 seconds only dims the backlight but it does stay on. I am looking for one of two fixes. Either to be able to keep this program running and passing the audio to the speaker after hitting the top 'off' button. Or somehow have the backlight completely shut off after 30 seconds. Ideally it would be the first option so I could lock the key pad/touchscreen and have the clock screensaver. Possible Registry hack? Could a I make shortcuts with options specific to this program? I see you can turn the backlight all the way off in the settings.. I am a new with WM. So don't know if any of this is possible?
You should search for a registry hack to keep WiFi turned on while the device is in standby. If I'm correct this setting is available in Diamond Tweak, and HD Tweak...
The description for this tweak is: "Keeps WLAN online/connected in standby mode."
The values on the HTC Diamond used are:
1.
Code:
HKLM\System\CurrentControlSet\Control\Power\State\Suspend\{98C5250D-C29A-4985-AE5F-AFE5367E5006}\Default
2.
Code:
HKLM\System\CurrentControlSet\Control\Power\State\Resuming\{98C5250D-C29A-4985-AE5F-AFE5367E5006}\Default
3.
Code:
HKLM\System\CurrentControlSet\Control\Power\State\Unattended\{98C5250D-C29A-4985-AE5F-AFE5367E5006}\Default
I checked this on my Treo Pro. The values are the same.
So just download Diamond Tweak and apply the tweak on your TP.
Don't mess around with other tweaks! Mind that the application is not written for the TP. There are a lot of tweaks that should work since it's both WM6.1. But better safe than sorry Backup your device before applying any tweaks!
Okay thanks I will try that. I do want more than just to keep the wifi running. Also, will need to keep the program running and have it pass audio to the speaker. Plus I use the evdo data more than the wifi. But I will give it a shot.
Use this - works great. I have it set to my HOLD side button.
Here is the Readme for it.
davidck65 said:
Use this - works great. I have it set to my HOLD side button.
Click to expand...
Click to collapse
Thanks a bunch! exactly what I was looking for.
Finally got to try the program and it does work great
Hello People,
I would like to hear what software you are using to handle profiles.
I find the options offered by TF3D/Sense UI, very basic and unsatisfactory.
So far I have heard of:
G-Prifle,
Phone Alarm
Phoneweaver
Problem is that, with the exception of phoneweaver, these apps don't integrate well with graphic shells.
Advice is most welcome.
Profiles!
I use Second Today, with it you can get second today screen and put all today-plugins there and still have TouchFlow on.
http://forum.xda-developers.com/showthread.php?t=401907
I use 2today with PhoneAlarm and it works just fine. I assigned 2today to send button. PhoneAlarms latest beta can operate Touch pros 2 bluetooth stack. There is 7 diffrent setting at bluetooth and mine device worked with setting BluetoothFix=5. Itried Phone Weaver, but it crashed sometimes with 2Today, and it cannot handle BT toggle.
I havent test G-Profile, but i read at they forum that its not fuction good with Touch Pro 2.
I used a long time Phone Suite 1.3 and that worked good with profiles, but it cannot handle BT toggle. And its version is rather old and it hasnt been updated for long time.
So im very happy with 2today with phonealarm, when im in car and put BT handsfree i can set a profile to that, and my volumes go up to 100%.
MadAri
Sorry for my english
I had the same question. Ultimately, I am back with PhoneAlarm. Nothing beats it, functionally, and there's now a solution to specifically support TF without needing a second today screen. Installing the latest version allows an icon on the taskbar using the new "paHost" mode. Try it.
I'm using the "FlippedOutV_B_w" skin to get all kinds of neat switches available at the touch of a button. Added a row of apps to launch and a row of folks to call and it's pretty slick. I just wish I could change the icon to a clock with a date or something like that.
i'm using the 2.01 theme vga for s2u2 for my tilt 2.
i have a question about the little headset icon that appears at the very top of the lock screen...is there a way to make that disappear? i do not have BT enabled nor a headset plugged in..not sure why it's there...
another questions, i use htc home weather, but the weather picture does not appear...any idea how to fix this?
thanks
I've noticed that headset icon too. It's probably a side-effect of the widcomm BT stack instead of the MS one. Might need to talk with A_C to get that resolved.
As far as the weather, make sure you have it set to Manila 3D (type 7 IIRC).
agentdr8 said:
I've noticed that headset icon too. It's probably a side-effect of the widcomm BT stack instead of the MS one. Might need to talk with A_C to get that resolved.
As far as the weather, make sure you have it set to Manila 3D (type 7 IIRC).
Click to expand...
Click to collapse
i set it to manila 3d, but only display today's high and low temps...what is type 7 IIRC?
do you by chance know how to get rid of the pin security? apparently i now have to slide to unlock (s2u2) and then enter pin..i thought s2u2 would overwrite it..
IIRC = If I Remember Correctly
And it is option 7 in the settings (Manila 3d Weather). You're just missing the icons for the weather but you can see the high/low numbers? That might be the theme if you're using one. Or maybe you're missing the gfx files under \Program Files\S2U2\gfx\weather
Pin security should be under Start, Settings, Lock (or at least it is on NRG ROM; Fusion might be different).
great, thanks! i was also wondering, if there's a way to have s2u2 lock when i listen to music with a bluetooth headset? apparently i have to tap the powerbutton to get s2u2.
do u have any tips on whats the best way to converse battery with s2u2 (setting wise)? thanks!!
You could always assign a hard button to launch S2U2. Or there's also the S2P integration. If you change the settings of S2U2 to lock when the backlight goes off instead of when coming out of standby it would auto-lock when the screen dims. Or there's the time-based locking as well (lock after x seconds).
I haven't had a problem with S2U2 draining the battery on the Tilt2. v2.04 seems rock solid. Just keep the default power/advanced settings and you should be fine.
agentdr8 said:
You could always assign a hard button to launch S2U2. Or there's also the S2P integration. If you change the settings of S2U2 to lock when the backlight goes off instead of when coming out of standby it would auto-lock when the screen dims. Or there's the time-based locking as well (lock after x seconds).
I haven't had a problem with S2U2 draining the battery on the Tilt2. v2.04 seems rock solid. Just keep the default power/advanced settings and you should be fine.
Click to expand...
Click to collapse
What exactly is S2P? Thanks for all the details information. I greately appreciate it.
Slide-2-Play. Another useful utility that A_C developed. Check out his site: http://www.ac-s2.com
agentdr8 said:
Slide-2-Play. Another useful utility that A_C developed. Check out his site: http://www.ac-s2.com
Click to expand...
Click to collapse
thanks, definitely very helpful!
Hi,
Only had my HD2 for a couple of days having come from iphone and have a couple of gripes with it. Maybe it's just me though as never had a windows phone before.
When using opera internet browser you have to zoom in quite a bit to press links, which I find a little annoying. I've tried skyfire which is much better, but you can't use pinch/zoom. Is there a browser that has the best of both worlds?
Is there a quick way to turn bluetooth on/off without having to go into settings?
Is there a quick link to profiles? I know if you hold the end call button you can select between vibrate or ringer, but not silent. I must admit, this is one thing I liked about the iphone, there was a simple switch to change from silent/ringer without having to turn the phone on and press buttons.
When making/receiving calls sometimes the screen comes back on and my ear presses other functions, or disconnects the call. Has there not been a fix for this issue yet?
The call quality isn't great, sometimes the caller distorts on certain words/letters
And finally, is there any way to change the vibrate? Can it be set to 'pulse' rather than just a continous vibration. Can it be set just to give one or 2 pulses when receiving a sms/mms message, rather than vibrating for the full length of the message alert? (I've personalised mine and goes on for about 10 seconds)
I think the phone is great, and these niggles aren't the most major of things (accept the screen turning back on during calls) but it would make the phone more of a pleasure to use.
Cheers
There are fixes or programs for most of your niggles, but they may not integrate with the HTC Sense interface! That's one downside of such a deeply coded front end, and one reason why I personally have stopped using it!
There is a file available which can allow links in Opera to be clicked when zoomed out- sorry, but I don't have time to link to it at present!
For profile and radio (BT/WiFi/Phone) switching, I'd recommend SBSH Phoneweaver . OK, it costs $15 but you can set any number of profiles with switching based on time, location, busy status etc, or manually. The pop-up menu also has a set of switches for the various radios. It can be launched via one of the 3 Program buttons on the front page of Sense, or via a small icon in the Taskbar. I'm, not sure if it can have the vibrate times defined or not!
NeilM said:
There are fixes or programs for most of your niggles, but they may not integrate with the HTC Sense interface! That's one downside of such a deeply coded front end, and one reason why I personally have stopped using it!
There is a file available which can allow links in Opera to be clicked when zoomed out- sorry, but I don't have time to link to it at present!
For profile and radio (BT/WiFi/Phone) switching, I'd recommend SBSH Phoneweaver . OK, it costs $15 but you can set any number of profiles with switching based on time, location, busy status etc, or manually. The pop-up menu also has a set of switches for the various radios. It can be launched via one of the 3 Program buttons on the front page of Sense, or via a small icon in the Taskbar. I'm, not sure if it can have the vibrate times defined or not!
Click to expand...
Click to collapse
Thanks for your response. What are you referring to when you say radios? Please forgive my ignorance, I'm still learning
You say that you have stopped using the HTC sense interface so what do you use instead?
Just having a look at the phoneweaver, can this be used with the sense interface? Does it overide the phone settings?
Radios = WiFi, Bluetooth and Phone Radio. These are the things you see in the Comm Manager with the little green On/Off sliders
I'm now using a 'Light' custom ROm without the HTC Sense stuff. I prefer to use a plain 'Home Screen' (which you can achieve by going into Settings/Home (or Today) and selecting the Items tab. From there you can turn on or off any of the Today items or Sense itself.
A lot of the programs I use have their own Today screen plug-ins which suits me fine- Resco Contact Manager, Elecont Weather and Chronos clock/alarms, plus I use a Launcher program called Launchpad by Panoramic Software that is opened by tapping the top left of the screen; this has 40 definable 'Favourites' links plus a full set of Programs/Settings links.
Back to work now!
snerkler said:
Just having a look at the phoneweaver, can this be used with the sense interface? Does it overide the phone settings?
Click to expand...
Click to collapse
It can take over all the phone settings and can be manual or scheduled, plus some other useful switching options. You can try it free for 15 days!
NeilM said:
Radios = WiFi, Bluetooth and Phone Radio. These are the things you see in the Comm Manager with the little green On/Off sliders
I'm now using a 'Light' custom ROm without the HTC Sense stuff. I prefer to use a plain 'Home Screen' (which you can achieve by going into Settings/Home (or Today) and selecting the Items tab. From there you can turn on or off any of the Today items or Sense itself.
A lot of the programs I use have their own Today screen plug-ins which suits me fine- Resco Contact Manager, Elecont Weather and Chronos clock/alarms, plus I use a Launcher program called Launchpad by Panoramic Software that is opened by tapping the top left of the screen; this has 40 definable 'Favourites' links plus a full set of Programs/Settings links.
Back to work now!
Click to expand...
Click to collapse
Cheers for your help
If you read this sticky thread you will find the answers to all of your questions:
http://forum.xda-developers.com/showthread.php?t=583638
It should be pretty obvious since its the first and most talked about topic.
Enjoy.
lorin.bute said:
If you read this sticky thread you will find the answers to all of your questions:
http://forum.xda-developers.com/showthread.php?t=583638
It should be pretty obvious since its the first and most talked about topic.
Enjoy.
Click to expand...
Click to collapse
Thanks for that thread, the trouble is I'm not a real computer/phone buff (yet) and so a lot of it goes right over my head. I don't even know what registry's are, and wy you need to edit them???
Ok, the concept of registry is quite simple. I'll put in a way so anyone can understand. Its a repository of stored key/value pairs.
Imagine a folder like structure, when you open a folder you will find a series of keys which, when opened, reveal the value.
Every key/folder is used by the OS or by some application. Its where all the back door settings are stored. So if you wanna make an app or the OS behave in a way you need to change the settings.
Using the registry is easy, but you have to make the first step... so what are you waiting?
lorin.bute said:
Ok, the concept of registry is quite simple. I'll put in a way so anyone can understand. Its a repository of stored key/value pairs.
Imagine a folder like structure, when you open a folder you will find a series of keys which, when opened, reveal the value.
Every key/folder is used by the OS or by some application. Its where all the back door settings are stored. So if you wanna make an app or the OS behave in a way you need to change the settings.
Using the registry is easy, but you have to make the first step... so what are you waiting?
Click to expand...
Click to collapse
Can I bugger up the phone if I don't know what I'm doing?
You can always make a backup of the registry you are changing. In resco registry editor tap and hold and press export. If the changes you made are not good, go to the folder where you exported the backup and open it. It will automatically imported and problem solved. But if you follow the instructions you won't have any problems, just don't change the registry for something you don't know or never seen in any tip/suggestion.
You could affect stuff if you dont do it right... but if you follow the instructions carefully without any typing errors, you will be fine...
Use this to Turn off BT easily.... it also does a lot of other stuff... basically, your bottom left softkey will become an "action" button... prssing that will bring up the screen shown in the screenshots. Works really well for me... also give you soft reset options without opening the back cover or powering off
http://forum.xda-developers.com/showthread.php?t=587493&highlight=action+button